Import / Export between pagegroups?

hi,
is it possible to use the export/import functionality
to move pages between pagegroups? how?
thanks

No. You need to be at the same revision level of Portal in both source and target environments.
Best Regards,
Harry

Similar Messages

Import/Export between different Portal versions

Hi, is there any resonable argument for not allowing imp/exp between different version? The thing is a developed a Page Group on a 9i AS and now need to export it to a 10g AS. It reasonable to think that an imp/exp machanism should exist, at least, for the latest version.

Hi there,
Yes, there is a reasonable argument for that and that is that the export code will be different from the import code. This means that alterations to the code in order to be more flexible or to even fix an issue, for example, on the export won't be in-place. Now when you'll try to import with the different code this certainly will clash your system (as the problem may already be within the DMP file that you've exported).
Although your request does make sense the implementation part is not that easy to be done.
I hope it helps you to better understand the constraints...
Cheers,
Pedro.

Help Import Export between different database interfaces ODI

Good morning!
I am new to ODI and would like to help me in the following doubts: I'm developing some interfaces in a database tests, it logically all my configuration connection is that bank.
When I import the interfaces in a database production, with another connection, I must reconfigure them totally, almost remaking them again? Or import, they automatically adjust?
I thank you
Emerson Formisano

Hi Emerson,
I didn't get your point clearly.
Please write in a proper statement.
However I am telling you some checks and steps to export import.
1> Before importing the interface please check all the source and target data stores are present in the deployment environment (where you are going to import)
2> If not there Import the data stores first.
3> data source should be physically present in DB (in case of table)
4> If your data stores and KMs are available then you don't have to make the interfaces newly
Thanks

Import / Export between two instances

Hi everyone, in very new in oracle, i have created two new instances, prod and test, apps team have are now doing the setup on the test instance, is it possible to import and export all the things they have done on the test to the prod once they're finish?
thanks and regards,
jmak

What version of Oracle Application Server are you using? And what type of application (Forms, PL/SQL, Java etc.) are you/they deploying on Oracle Application Server?
If you are using 10gR2 10.1.2.x, refer this:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/testprod.htm#BHBGBJFH
Thanks
Shail

Import/Export Between Gschem and PSpice,

I have some .sch files I made with gEDA's schematic editor (gschem), and am trying to import them into PSpice for Windows. I'm not sure if this is the right community to ask, but I figured I'd just see if anyone here knows how to do it...
Or, if anyone can point me in the right direction (where to look, who to ask), I'd be very grateful.
Thanks!

No. You need to be at the same revision level of Portal in both source and target environments.
Best Regards,
Harry

Page Export / Import in between two workspaces in the same instance

Hi All,
I am trying to import a page from one application to another application in a different work space in the same instance.
In the export file i have changed the target application id and workspace id. I am facing below error while importing the specific page.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (FLOWS_030100.WWV_FLOW_PAGE_PLUGS_PK) violated <pre>declare s varchar2(32767) := null; l_clob clob; l_length number := 1; begin s := null; wwv_flow_api.create_page_plug ( p_id=&gt; 190100618443233983 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_page_id=&gt; 31, p_plug_name=&gt; 'Upload Scripts', p_region_name=&gt;'', p_plug_templa
Error installing page.
Return to application.
Any help for this.

I got the solution for the page export/import in between 2 workspaces.
Only thing is we need to do some template related changes in the page, item, region attributes .
Ref: http://www.dba-oracle.com/htmldb/t_exporting_copyin_pages_screens_workspaces.

Import/Export Portal Content between EP6 6.20 and 6.40

Hi there,
We are about to setup a second portal in Europe on 6.40, while the US portal will still be a EP6 SP2 on 6.20 for some time.
I was wondering about the possibilities to share portal content between those 2 installations, especially iViews and pages (not using remote iViews). As long as the name of the related PAR files (code link) are the same, this should work.
On the other hand, iViews and pages will have a different set of parameters like "Allow Client-Side Caching" or "Use API of Tray" based on different portal versions. What will happend when importing/exporting these objects from 6.20 to 6.40 or the other way around?
Thanks,
Florian

Ivo, thank you for your reply.
But I think mapping ports doesn't solve our problem.
WAS 6.20:
Just the context path will be send in the header field 'location' to the browser (located in the internet).
In case of a redirect the browser mixes the server name of the sender (the reverse proxy) and the context path and sends the request to the reverse proxy. The reverse proxy forwards the request to the WAS 6.20 intranet server.
WAS 6.40:
The header field 'location' contains now the whole URL (with the server name of the WAS 6.40 system, which is only accessible from our intranet).
In case of a redirect the browser takes the content of the header field 'location' and sends the request to the not accessible WAS 6.40 intranet server. Of course that doesn't work.
So it it depends on the content of the header field 'location'.
What can we do in WAS 6.40, so that the header field 'location' contains only the context path as it has done in WAS 6.20?
Regards,
Uwe

Is it possible to export/import subclips between 2 different computers?

hi,
i am collaborating on a project with someone, we need to export/import subclips between 2 different computers. is thisa possible, and how?

Hi there,
I'm the other collaborator on a project with Jelly Belly. As I am coming from using abode premier pro to final cut, the concept of sub clips is new to me.
We are planning on capturing close to 50 mini dv tapes, in as far as possible complete master clips for each tape. Once this is complete we will have all master clips copied to two identical 1T external hard drives.
Then the plan is to break the master clips down into sub clips in order to thin out and better organize the footage. To speed this process up we plan to do this concurrently on two separate computers, at this stage both running Final Cut Express 4. Once this is done is it possible to import those sub clips into a new project? At this point we will most likely running Final Cut Studio 3.
If so then how would one go about doing it?
Thanks for any further advise on this.

Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

How do I import/export files between 2 computers that are not sharing a network?

My Desktop operating system Windows XP Professional Version 2002 Service Pack 3
My Laptop operating system Windows 7 Home Premium Service Pack 1
need to import/export files between the two...thank you

larrymize01 wrote:
My Desktop operating system Windows XP Professional Version 2002 Service Pack 3
My Laptop operating system Windows 7 Home Premium Service Pack 1
need to import/export files between the two...thank you
If the computers are in different locations, use a flash drive. If they are in the same household on the same network, you can use iTunes Home Sharing.

How can I sync/import/export bookmarks between different users on the same computer

To save time, I want to sync/import bookmarks between/from another user on the same computer.

Many thanks twalker for your prompt and simplified explanation for resolving my problem which is much appreciated by this tarnished silver surfer. I will now arrange to download FX4 and follow your instructions.

IMPORT/EXPORT statement in Background Mode

Hey dudes,
I am facing a problem in my coding. I am dealing with coding in several events in IS-U, transaction FPY1.
However, it's not so important ya. Now I am written some code on IMPORT and EXPORT some parameters between 2 program code. It's work very fine only in 'DEBUG MODE', but when it's running not debug mode (Is BACKGROUND MODE), coz it's massive run program.
I suspect it's because of the background job. Does background job using ABAP Memory? IMPORT/EXPORT is only for dialog work process, not background work process?? I have a lot of question mark on my head now..
Hope anyone facing dis issue before can help.
Cheers,
Isaac.

Are you trying to pass data via EXPORT/IMPORT between two programs that are both running in background, or from an online session to a background process?... i.e. what are the two lots of program code that you are wanting to pass parameters between?
It would be fine for a background program to "export" data to a memory ID, then for the same batch program to submit another program that does the "import" from the same memory ID... but this method won't work for an online user doing an "export" and a batch job doing an "import" -> for this to work, you would need to persist the parameters so that the batch job can retrieve them.
If you can explain the scenario a bit more, will try to offer more help...
Jonathan

ABAP command IMPORT/EXPORT

Hi!
I would like to know whats the replacement for the IMPORT and export commands used in 4.7c in ECC6. Can anyone tell me whats the replacement commands for import and export command that is used in abap/4 4.7c for ECC6.
Thanks

Hi Aarav,
there is nothing like replacement for import/export.there is another statements to transferdata which are Set/Get.
when you are working with sap you have sessions.so in between session if you want to transfer data then you will use set/get parameters.import/export are used within the session.means you opened se38 and written a program and then go back to se38 initial screen and entered another program name and in that program you want the data which is in the previous program you have written in the se38 in same session.
reward points if helpful.

Application import/export failing, hopefully a simple one though

hi all,
i'm very new to oracle and am trying to get going with xe. i'm working between work and home and want to be able to transport wherever i'm at to work/home - so i thought the application import/export function would be the best way? first of all, is it?
if so - i keep getting the
failed to parse SQL query:
ORA-00942: table or view does not exist
error
i'm running the same versions of oracle, on the same platforms (Application Express 2.1.0.00.39, winXPpro all service packed up). both my users have dba roles and the apps work fine on the machines i created them on. the import and install processes claim to be successful and the error only comes up when i try to log in to the application. any ideas?
btw - the apps are just simple tests, dependences etc with a couple rows in each table]
any help be much appreciated even if its "go read this!" as i've googled away & got not much....
cheers!

Your problem is likely that in your office you do not have the tables required by your program. The export does not include your tables. You have to create them yourselves

Using XML Import/Export in Transport Connection

Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection. This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements? I was trying this out between a Dev and Sandbox system and only had limited success. I was able to take a small query and perform the Export to a local .xml file without much difficulty. But when I try to do the Import, my query never shows up. The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
==========================================================
SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
Diagnosis
You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
System response
The object was ignored during the import.
Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
Procedure
Install the specified objects from Business Content. Only import the metadata afterwards.
=========================================================
The portion returned for Saving and Activating returns green lights. The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK.
Just curious if anyone else has worked with this and could help advise.
Thanks... Jody

This is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
However, when an InfoObject is collected, you get all the attributes, texts in all languages.
If anyone has more insight, please enlighten us.
-John

Import / Export between pagegroups?

Similar Messages

Maybe you are looking for