Import/Export Job in management portal.

I am trying to create an Import/Export job in portal, I read this document:
http://azure.microsoft.com/en-us/documentation/articles/storage-import-export-service/
and I am unable to do this, document says download import/export tool, but I am unable to do that any help will be greatly appreciated.

Hi,
I would request you to check if you meet all these prerequisites:
• You must have an active Azure subscription.
• Your subscription must include a storage account with enough available space to store the files you are going to import.
• You need at least one of the account keys for the storage account.
• You need a computer (the "copy machine") with Windows 7, Windows Server 2008 R2, or a newer Windows operating system installed.
• The .NET Framework 4 must be installed on the copy machine.
• BitLocker must be enabled on the copy machine.
• You will need one or more empty 3.5-inch SATA hard drives connected to the copy machine.
• The files you plan to import must be accessible from the copy machine, whether they are on a network share or a local hard drive.
Regards,
Azam Khan

Similar Messages

Import/Export Jobs Fail - ORA-01017 Invalid UserName/PW - Solved!

Every time I try to run either an Import or Export Job from OEM it always fails with ORA-01017 Invalid UserName/PW.
I have read numerous posts in this forum on related topics.
Suggestion have been;
1. Make sure OS login is a member of the ORA_DBA group.
2. Make sure the OS user has the ability to logon as batch job.
3. Make sure the ORACLE_SID and ORACLE_HOME are set.
4. Make sure to set up Preferred Credentials on the Preferences page.
4. On and on and on.
I am using Oracle Version 10.2.0.1.0 On Windows 2003 Server Enterprise SP1.
When I installed the DB using Oracle Universal Installer it asks what Password you would like to assign to SYS, SYSTEM etc. I used the following password "AvT_$651#JK" which it accepted without problem. The installation completed and I am able to log into OEM using SYS/AvT_$651#JK (SYSDBA) or SYSTEM/AvT_$651#JK (Normal).
I then proceed to "import from export files" a schema from a previously "export to export files" that was created on another host using the same Oracle Version 10.2.0.1.0 On Windows 2003 Server Enterprise SP1. This job always fails with "ORA-01017 Invalid UserName/PW" even though the username and pw are correct!
Turns out the password itself is the problem, apparently some part of the process (RMAN??) does not like the special characters in the PW. Changing the PW to "testpw1" worked.
Using Oracle Universal Installer should have prevented me from using a password that violated this policy.
BG...

Does you provide username under local security policy along with domainname like
abc\uo.cok ? If not, please enter username along with domainname and let me know the result. If possible aste eventviewer log for this connection

Import/Export - Trying to create the job

I am attempting to follow the directions at:
www.windowsazure.com/en-us/manage/services/storage/import-export-service-for-blob-storage
on the creation of an import /export job. However, when I follow through to the point of:
Create the Import Job
Once you have prepared your drive, navigate to your storage account in the Management Portal, and view the Dashboard. Under
Quick Glance, click Create an Import Job.
Under my management portal, I have a dashboard, but I do not have a "quick glance" or anything that leads to a 'create import job'.
It seems like there is something that I am just not getting here..
Your help is appreciated.
Dwight

Hi Galo,
Thanks for your post!
From the link you provide, I think I got the solution of this issue.
@Dwight I suggest you try the Galo's post. Sorry for my
negligence.
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Questions on import/export

Hello Everybody,
I am learing the import/export feature of the portal.
I have couple questions
1. Can I import the portal desktop and all the related framework page and theme. Will it be intact after the import?
2.I have a folder in KM with various documents, How shuould I import this folder and after the import are links going break withing the documents?
Thank you
-Suresh

Hi Suresh,
Yes you can do it using the following procedure.
Go to System Administration > Portal Dispaly > Theme Archive and you can import new theme files.
u will find the new theme listed Under My Themes.
You can use the theme editor to customize the theme too.
if you want to Create ur new theme or personalize the exsisting theme use the following link
Demo Themes http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4a10edf9-0701-0010-a6bc-c63bc3db08d5
How To.pdf -
> http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6483a890-0201-0010-48a6-b6e595111efe
Pleasse do not edit the std. themes if necessary copy it and then edit the copied version.
hope it helps
Javed.

Import/Export - How to get Quick Access Token?

I am trying to create/submit an import/export job for the azure storage. I located the place to activate the import/export service in the Preview Features.
After clicking "Try it Now" button, I am prompted for the subscription name (no problem), but it is also asking for a Quick Access Token".
How / Where do I get the Quick Access Token? There is an article about getting tokens from the API, but that does not appear to be related to my issue.
Any help is greatly appreciated.
            Windows Azure Import/Export Service
Charges may be included
<label for="subscription-selector">Subscriptions</label>             <select id="subscription-selector"><option selected="selected" value="06608935-fe6f-4336-bc3c-0239aae71ebf">Pay-As-You-Go</option><option
value="167d8420-6b2f-4764-86a3-2e3b6eb39d18">SDI</option></select>
<label for="token">Quick Access Token                </label><input id="token" type="text" value="" />
You will receive an e-mail when this feature is enabled for your subscription.

hi Dwight,
From error message, I guess your subscription may didn't enable this features. I suggest you contact our azure support team to solve this question.
SUPPORT CHANNEL:
Please contact support team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Please try it. Any questions, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Job Schedule Management

Hi,
We recently upgraded our Sol Man system to EHP1 and we are in the process of Job Shedule Management. We imported few jobs from managed system and while monitoring ,getting error Business Proccess not created.
Could any one please tell me one thing, shall we need to setup Business Process Monitoring prior to setup Job Schedule Management? Please explain high level end to end Job Schedule Management steps.
Thanks & Regards
Srinivas.

Hi Srinivas,
please have a llok under https://service.sap.com/jsm to find further links to important SAP notes that explain a lot. You can also find iTutors about JSM under https://service.sap.com/rkt-solman.
Generally speaking BPMon is NO prerequisite for JSM. But as you probably saw during the import you have to assign your documented job either to a logical component (esp. meaningful for system related jobs like housekeeoing spool or dumps) or you assign to a business process step. An assignment to a logical component is a minimum requirement!
For a business process step assignment you need to maintain processes either in the project part or in the solution directory of SAP Solution Manager.
An active BPMon is only needed if you want to monitor background jobs and want to make use of the integration between JSM and BPMon.
You should also look for Blog and Forum entries of Martin Lauer in order to get further JSM insights.
By the way: If you should encounter some functional problems you can open an OSS message on SV-SMG-PSM.
Best Regards
Volker

Failed to import publish settings file in Azure Toolkit for Eclipse with Java downloaded from Azure Management Portal

I tried to deploy the Hello World JSP application to Azure from Eclipse following the instructions at http://msdn.microsoft.com/library/azure/hh690944%28VS.103%29.aspx. Got the following error when trying to import Publish Settings file downloaded from Azure
Management portal:
Importing MyMSDN.publishsettings file failed. Reason: failed to parse file. Ensure publish settings version is 1.0.
Could someone help me solve this problem? Thanks.

Hi huihuang,
It seems there is some issue with your publishsettings file, could you open this file and copy the content here? Or please have a look at this article:
http://gauravmantri.com/2012/09/14/about-windows-azure-publish-settings-file-and-how-to-create-your-own-publish-settings-file/ for more information about it.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Portal Import/Export Different OID Servers

We are trying to move our 9ias instances (portal) to another set of servers used for production with security. Both instances are associated with their
own OID/Infrastructures - they are not sharing the same infrastructure.
I reviewed Note:216572.1 Subject: Exporting/Importing in Oracle Portal 9.0.X, but it does not tell you the steps required to migrate the users/groups as well. I also looked at the Portal 9.0.2 Export/Import FAQ (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1120.HTM) , but neither tell you how to export the users. They only say to use the OID Tools. What tools?
Excerpt from FAQ:
How do I export/import objects (with security) between portals using different OID servers in 9.0.2?
A manual workaround is available:
1. Use OID utilities to migrate Users/Groups from source OID server to target OID server.
2. In Oracle9iAS Portl, migrate portal objects with "export security" enabled from source Portal to target Portal
3. (MANUAL) For the imported users, set the guid to null (WWSEC_PERSON$.GUID)
4. (MANUAL) For the imported groups, update the guid using the instructions found in the section below on how to update the GUID.
Please refer to th[i]Long postings are being truncated to ~1 kB at this time.

To migrate users, groups, and security within Portal, you must have a common OID environment. The difference between all OID implementations is the RootDSE, (the part that starts with dc=..,dc=..., etc.
You have to extract the user base and portal groups (and any other unique objects and attributes) from the old OID environment and and use the extraction to create an ldif file that will add these to the new OID environment. The ldif must have its own RootDSE for all distinguished names (dn) and common names (cn) in the ldif file.
We basically created our OID migration solution around a Java applet that prompts for the OID IP address, OID HOST NAME, OID ADMIN USER, and OID ADMIN PASSWORD. It access the new OID environment and extracts the RootDSE, then builds the ldif file for import of groups, objects, and attributes. Our user ldif will do pretty much the same, once we have the user list from our customer.
The more complex issue revolved around the migration of external applications, which I address in my EXT_APP package, which enables you to build portlets containing links to external apps, while maintaining portability, as well as Item Level Security. YOu can find this in my Knowledge Exchange folder.
Quite a mouth full...sorry
HTH
LLB

Where are device export jobs managed?

I created a scheduled device export job from the CS/Device Management/Device summary page to run daily and create a csv file. This ran fine for several months, but then seemed to stop. I think we had an issue with the jrm process, long since resolved. During that time I created another scheduled export job. I think they are now conflicting with each other (export to the same file name). I was hoping to delete one of them, but am unable to determine where they are stored. Just for a test I created a third job, noted the jobID, but can't find that one either. They don't seem to be listed in the RME job browser. Where are these stored and how do I delete the extraneous jobs?
Perhaps a related issue. When go to the System View of CW, there is a panel named Job Information Status. It always contains only the string 'Loading....' in red (along with Log Space Usage and Critical Message Window). Thoughts?.

My guess is you have a lot of jobs on this system, and jrm is not returning fast enough. I find that Firefox is a bit more tolerant to delays than IE. If you can, try FF, and see if the job browser loads. If so, purge some old jobs.
Posted from my mobile device.

Import/ export of an object or item in portal 10g

Good Morning!
</p>
can anyone tell what is the format of import / export of an object or item in portal 10g?
<br>this is in the context of updating or rolling into production server an item whose earlier version might be sitting in the production server before. and it is based on the premise that the environment/ system is composed of more than one servers and production is only one of them.
<br> apologies ... if i am not even phrasing the question right. by format, what i mean to know is does it first delete the older component and then generate the new one or it renegades and keeps the older version and bring on the newer version, or what.
</p><p>
any hints will be appreciated.
</p>
syed

Kasia,
There are a number of guides on the documentation tab for Oracle9iAS Portal that can answer your questions. Be sure to check out the FAQ!
Rich

Import/Export Portal Content between EP6 6.20 and 6.40

Hi there,
We are about to setup a second portal in Europe on 6.40, while the US portal will still be a EP6 SP2 on 6.20 for some time.
I was wondering about the possibilities to share portal content between those 2 installations, especially iViews and pages (not using remote iViews). As long as the name of the related PAR files (code link) are the same, this should work.
On the other hand, iViews and pages will have a different set of parameters like "Allow Client-Side Caching" or "Use API of Tray" based on different portal versions. What will happend when importing/exporting these objects from 6.20 to 6.40 or the other way around?
Thanks,
Florian

Ivo, thank you for your reply.
But I think mapping ports doesn't solve our problem.
WAS 6.20:
Just the context path will be send in the header field 'location' to the browser (located in the internet).
In case of a redirect the browser mixes the server name of the sender (the reverse proxy) and the context path and sends the request to the reverse proxy. The reverse proxy forwards the request to the WAS 6.20 intranet server.
WAS 6.40:
The header field 'location' contains now the whole URL (with the server name of the WAS 6.40 system, which is only accessible from our intranet).
In case of a redirect the browser takes the content of the header field 'location' and sends the request to the not accessible WAS 6.40 intranet server. Of course that doesn't work.
So it it depends on the content of the header field 'location'.
What can we do in WAS 6.40, so that the header field 'location' contains only the context path as it has done in WAS 6.20?
Regards,
Uwe

ODI Job Import/Export

Hi,
I want to import the jobs from ODI.I'm new to ODI.Please tell me how to export the jobs or project from the ODI

ODI supports XML import/export and its "how to" could be found in standard documentation. Using this you could import or export your objects such as projects, folders, packages and interfaces ("jobs" in other ETL tools). Which ODI version do you use?

Data Pump - How to avoid exporting/importing dbms_scheduler jobs?

Hi,
I am using data pump to export a users objects. When I import them it also imports any jobs that user has created with dbms_scheduler - how can I avoid this. I tried EXCLUDE=JOBS but no luck.
Thanks,
Jon.
Here are my export and import paramater files:
DIRECTORY=dpump_dir1
DUMPFILE=reveal.dmp
CONTENT=METADATA_ONLY
SCHEMAS=REVEAL
EXCLUDE=TABLE_STATISTICS
EXCLUDE=INDEX_STATISTICS
LOGFILE=reveal.log
DIRECTORY=dpump_dir1
DUMPFILE=reveal.dmp
CONTENT=METADATA_ONLY
SCHEMAS=reveal
REMAP_SCHEMA=reveal:reveal_backup
TRANSFORM=SEGMENT_ATTRIBUTES:n
EXCLUDE=TABLE_STATISTICS
EXCLUDE=INDEX_STATISTICS
LOGFILE=reveal.log

Sorry for the reply to an old post.
It seems that now (10.2.0.4) JOB is included in the list of SCHEMA_EXPORT_OBJECTS.
SQL> SELECT OBJECT_PATH FROM SCHEMA_EXPORT_OBJECTS WHERE object_path LIKE '%JOB%';
OBJECT_PATH
JOB
SCHEMA_EXPORT/JOB
Unfortunatly, EXCLUDE=JOB still generates invalid argument on my schema imports. I also don't know whether these are old style jobs, or scheduler jobs. I don't see anything for object_path LIKE '%SCHED%' , which is my real interest anyway.
The data pump is so rich already, I hate ask for more, but ... may we please have even more?? scheduler_programs, scheduler_jobs, scheduler etc.
Thanks
Steve

Cisco Management Portal 8.5.1 Tenant/Peripheral Import failed

Hi Folks,
My name is Eric and I'm facing some issues on CCMP 8.5.1. First of all, I have configured all the steps following the Installation Guide for Cisco Unified Contact Center Management Portal, but I stack at Tenant/Peripheral Import, at Communications Server Configuration. When I click to add a new Communications Manager, the system ask me to run a Tenant/Peripheral import, but when it starts, the process failed. All the connections are ok, the ICM connections to DB are ok.
How can I import the Peripheral?
I look at Connection Manager and all the process are yellow (pending test). There is a way to turn it green (Active)?
Thank you very much.
Obs.: I've attached some prints about this case.

Hi eric,
I have same issue. did you find solution to this?
regards,
Sandeep

OIM 11.1.1.5: Error while importing scheduled jobs

Hi All
I exported my custom scheduled task+job from OIM 11g environment and am trying to import the same in another 11g environment (both 11.1.1.5) using deployment manager. While importing the xml, I get the following error:
MDS-00044: Metadata for MetadataObject with name /db/task.xml already exists in the configured store
any idea how can I export/import all the custom jobs from one OIM 11g env to another.
Please help.

While taking export using deployment manager select scheduled task and then select all dependent jobs. don't export jobs directly now Import same in other environment.
Make sure you upload the scheduled task jar using uploadjars.sh utility or put at Scheduled Task folder before importing above.
this is what I applied for migration and it is working fine.
If still error persist. try to remove it using WeblogicDeleteMetadata.sh utility
finally if nothing works. put custom MDS (scheduledtask.xml) at your machine /Temp/db/scheduledtask.xml. upd.ate the from location in weblogic.profile and import using WeblogicImportMetaData.sh utility.
But, always put your jar before importing it.

Import/Export Job in management portal.

Similar Messages

Maybe you are looking for