Import/Export von Personen Tags

Kann man Personen Tags in andere Kataloge exportieren? (so wie es bei allen anderen Tags auch funktioniert)

Wo liegt der Fehler?
Ich bin ich Photoshop:
Ich gehe in den Bearbeitungsmodus des Smartobjekts (indem ich in der Ebenepalette mit der re Maus "Inhalten bearbeiten" wähle)
"Datei" > "Export" > "Pfade -> Illustrator"
ein .ai wird gespeichert
Ich bin in Illustrator:
"Datei" > "Öffnen"
Problem: es werden keine Pfade angezeigt (strg y zeigt auch keine Pfade an)
Ursache: Das Fenster "Pfade in Datei exportieren" in Photoshop lässt nur eine Möglichkeit zu, nämlich dass ich die Pfade: "Dokumentenbegrenzung" exportiere". Wieso kann ich nicht mehr auswählen?

Similar Messages

Importing/Exporting tag librariy possible?

I have a major problem with the "apply source
formatting" and auto code formatting of my code with DW 8
on my PC.
It auto inserts three lines of spacing for css, php and
jscript. I tried manuaaly adjusting it in the tag library and it
made all of my code a mess (eliminating all spacing and even breaks
between tags.
However, on my laptop (also DW 8) apply source formatting and
auto code formatting is absolutely perfect.
Does anyone know if I could "export" my tag
library from the laptop to the PC, or copy settings from one to the
other?
I don't want to be forced to go into the tag library on the
PC and set each and every tag one at a time. And for some reason
the PC will not even allow me to set the tags back to
"Default".
The real thing I would love to do is simply export settings
from the laptop to the PC.

OMF or AAF is the format for that purpose.
Usually, Export/Import is under File menu.
For Pro Tools, DigiTransformer is bundled in Pro Tools HD (any version) and Pro Tools (standard) 9 and 10,
but it was a paid option of Pro Tools LE and M-Powered 8 or earlier.

Is there a note app that features encryption, folders, backup, and import/export?

Hi friends,
I have been searching for a month for a Notetaking app for the iphone which has these attributes:
able to import/export notes from some form of text file suchas csv. I need to bring over a large number of notes from my android phone. I can perl-script and should be able to massage my data into any format requiredby any text-based importer. I would expect this feature to be based either on itunes or a proprietary sync program on a Mac.
encryption (not just a password), preferably AES-256 bit orhigher
features categories, tags, or folders (any one of these isfine)
able to backup and restore notes in encrypted form, in caseof loss of device
You would think this is a very basic set of features, but I have notbeen able to find anything on the App store that includes all of thesefeatures. If you know of any such app, please let me know.
Thanks a lot!

There should be some utilities that might do that on macupdate.com if you search around in there. It could be done as a macro action in Photoshop, but that's an expensive solution for this. VueScan could also potentially do it, but is also not cheap.
Also, some of the utilities that come bundled with scanners may be able to do this, but only when running the scanner they came with.
Definitely the features exist on the Mac like auto-recognition of multiple images on a page, auto-rotation, auto-levels, PDF export etc. You just need to find them in the right combination in the right app.

Import BRIDGE collections + picture tags into Lightroom 3

Hi everybody
I am just evaluating LIGHTROOM 3.3 and I have CS4 Design Premium Package including BRIDGE CS4. NowI have a huge amount of picture and gave them a lot of picture tags like stars and colors etc and I have several COLLECTIONS under Bridge (NAME.filelist).
How do I get all the COLLECTIONS and picture TAGs of my BRIDGE environment into Lightroom?
Does anbody have an idea?
Thanks in advance and merry X-mas to all of you
Georg

Hi WW,
thx a lot for your help.
regarding collections I found the following article here: http://forums.adobe.com/message/3196896#3196896
Your help regarding tags is surely helpful and solve the problem, but it is only a work-around.
For my understanding the three products out of one house (PhotoShop Elements Organizer, Bridge and Lightroom) doing about the same, should ...
work the same (same idea, same behaviour, organizing by path/subfolders instead of cataloges etc.)
maintain the same database and files (LR should recognize the collections from BR and Vice Versa, use the same cache files etc.) and should
be compatible to each other (e.g. Tags, Collections etc)
This is not pointing at you WW , I hope someone of the ADOBE Developer team is reading this!!
Actually I suggest ADOBE
to eliminate Organizer and integrate the good functions into BRIDGE.
give BRIDGE as the free of charge picture organizer to PS Elements and to PS CS
change LIGHTROOM into an payable upgrade of BRIDGE with enhanced functionality of the free of charge BRIDGE
better integration of PSE, PS CS and Lightroom
Beside that I suggest to get rid of the Catalog idea of Lightroom with it's import/export and synchronization needs and instead use or at least integrate the idea of BRIDGE to get pictures structured and organized by path and subfolders, as this is anyhow how the pictures are stored already for most of us. I doubt that anybody just throw all files into one big subdirectory and get the organized into cataloges. But please keep collections as they are helpful to quickly collect some pictures to commonly work on them. by drag & drop
Thanks
Merry X-Mas and a Happy New Year
Georg

Import/export volume to different administrative server

Hi everyone,
i'm testing the OSB software for DR environments. Now i want to export volume since main administrative server and import volume to different admin server. When I run export command, it shows me "Error: can't execute command - ran out of import/export elements"
ob> lsvol -L pLib1 --long
Inventory of library pLib1:
in 1: volume MONTH_ORAFS-000001, barcode 000011L4, oid 102, 706599936 kb remaining, expires 2011/03/18.10:19, mediainfo hw encryptable
in 2: vacant
in 3: volume DAY_FS-000001, barcode 000013L4, oid 111, 774944768 kb remaining, expires 2012/03/09.13:28, mediainfo hw encryptable
in 4: vacant
in 5: vacant
in 6: vacant
in 7: vacant
in 8: vacant
in dte: vacant
ob> exportvol -L pLib1 -v DAY_FS-000001
Error: can't execute command - ran out of import/export elements
can you help me, please?
Thanks!!

Rich,
the import tape catalog with the identifyvol --import command was fine. Now, when i run a restore oracle database_test with the imported catalog show error media manager.
ob> lssection -v WEEK_ORA-000001
322 WEEK_ORA-000001 196 1 0 database_test.bos.local 02/28.17:02
323 WEEK_ORA-000001 197 1 0 database_test.bos.local 02/28.17:09
324 WEEK_ORA-000001 198 1 0 database_test.bos.local 02/28.17:16
325 WEEK_ORA-000001 199 1 0 database_test.bos.local 02/28.17:17
326 WEEK_ORA-000001 200 1 0 database_test.bos.local 02/28.17:18
my RMAN catalog show the backup
BS Key Type LV Size Device Type Elapsed Time Completion Time
9898 Incr 0 128.00K SBT_TAPE 00:06:43 2011-02-28 17:17:11
BP Key: 9907 Status: AVAILABLE Compressed: YES Tag: TAG20110228T170322
Handle: *0am5qik4_1_1* Media: WEEK_ORA-000001
SPFILE Included: Modification time: 2011-02-23 13:24:54
SPFILE db_unique_name: database_test
Control File Included: Ckp SCN: 989240 Ckp time: 2011-02-28 17:10:28
RMAN> restore spfile to '/home/oracle/';
Starting restore at 2011-03-01 18:21:01
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=96 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Oracle Secure Backup
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=127 device type=DISK
channel ORA_SBT_TAPE_1: starting datafile backup set restore
channel ORA_SBT_TAPE_1: restoring SPFILE
output file name=/home/oracle/
channel ORA_SBT_TAPE_1: reading from backup piece 0am5qik4_1_1
channel ORA_SBT_TAPE_1: ORA-19870: error while restoring backup piece 0am5qik4_1_1
ORA-19507: failed to retrieve sequential file, handle="*0am5qik4_1_1*", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
sbtrestore: piece '0am5qik4_1_1' does not exist in the backup catalog.
thanks so much!

Import/Export xml data from subtree of dynamic XFA form

Hi
We would like to import/export xml data (subtree) of a dynamic xfa form. The following script does only work with static AcroForms:
formular.content.subformDaten.Button1[1]::click - (JavaScript, client)
event.target.exportAsXFDF({aFields:["formular[0].content[0].subformDaten[0]"]});
With dynamic forms the script does export an empty xml file (no data is included, only xml root tag):
<?xml version="1.0" encoding="UTF-8"?>
<xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve"
><f href="ExportTest_frei.pdf"
/><ids original="EA43F92A6B6EA34F9C4DBBC2DA0B1840" modified="6A7C6282A167594F91240B773AA979A7"
/></xfdf
>
Any ideas? Many thanks.
Best regards,
Daniel

Hi Paul
The Problem that Daniel posted was originally mine. Now after subscribing to this forum myself, I try to describe the aim of using exportAsXFDF/importAnXFDF.
exportData("", false) and exportXFAData works, in my opinion, only with a DataConnection. In my form I have indeed such a connection for sending the whole form. But in addition I need the possibility to export and import only part of the data without overwriting the rest of the filled form.
exportAsXFDF works with static forms. So there MUST be a possibility that works with dynamic forms, right?
I hope anyone has a solution.
Beat

VRF Import/Export - how to filter routes

Hi,
Is there another way of filtering the routes you want to import into a vrf because the 'route-target export' and 'route-target import' imports ALL the routes tagged with the given 'asn:xx'. I wanted to have only selected routes imported from one vrf to another. Vrf 'import map' command does not work for me?
Does filtering makes sense or practical at vrf-vrf level? Where do you use 'import map' command?
thanks
resti

Hi Harold,
Actually my needs are a little different. Instead of leaking between 2 VRFs, I need to leak to global. Have a default in my VRF that gets imported to global table.
Goals:
1. At hub and spoke both sites, let ISP connection run in a separate VRF. Gets a little extra security from internet.
2. When ISP connection is active, let each site route its traffic out to internet directly. However when the local ISP connection fails, remove the default route that points to ISP so that OSPF learned default from the hub site routes all traffic to hub and puts on internet.
What's working:
DMVPN tunnels work fine across INET VRF.
What's not working:
1. The IP SLA tracked route leak to global VRF is not working. Traffic doesn't go out to internet directly using local connection.
I followed following example for this configuration.
http://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/multiprotocol-label-switching-vpns-mpls-vpns/47807-routeleaking.html
Any suggestions? Is it possible or supported configuration?
Below is a diagram of my setup.
Below is my relevant config snapshot. 2.2.2.1 is actually my another FW in front in the lab that does all NAT and provides internet connection to this lab.
ip sla auto discovery
ip sla 1
icmp-echo 8.8.8.8 source-ip 2.2.2.2
vrf INET
ip sla schedule 1 life forever start-time now
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/1 2.2.2.1 track 1
ip route vrf INET 0.0.0.0 0.0.0.0 2.2.2.1
Lab-RTR#sh ip sla sumary
IPSLAs Latest Operation Summary
Codes: * active, ^ inactive, ~ pending
ID           Type        Destination       Stats       Return      Last
                                           (ms)        Code        Run
*1           icmp-echo   8.8.8.8           RTT=32      OK          4 seconds ago
Lab-RTR#sh ip route | in 0.0.0.0
Gateway of last resort is 10.254.2.99 to network 0.0.0.0
O*E1 0.0.0.0/0 [110/221] via 10.254.2.99, 00:00:59, Tunnel2
As you can see, its learning default from Tunnel instead of taking the static default.

Export paragraph format tag to attribute

Hi All,
Using structured FM 11 on Windows 7.
I need a way to round-trip paragraph format tags. I know it is easy to assign them on import with the EDD, but I'm not sure how to save them on export.
I was hoping the read/write rules could contain something along the lines of:
attribute "paraFormat" is fm property paragraph format tag;
I figure it can probably be done with ExtendScript or a custom API, but I would rather avoid these if possible.
Thanks!
Trevor

Trevor,
I think you are out of luck with r/w rules. The assumption is that formatting logic is owned by the EDD and would therefore have no relevance in the XML. Like you surmise, an import/export API client could do it. An ExtendScript could also do it before the import, by populating the attributes ahead of time. That would be a very simple script, maybe 20 lines or so.
My FrameSLT plugin could also populate the attributes ahead of time with a Node Wizard Script, but that isn't free like ES. www.weststreetconsulting.com.
Russ

Export von Bilder

Der Export der Bilder funktioniert nicht mehr. Es erscheint die Meldung: "Ein intener Fehler ist aufgetreten ?:0 attempt to perform arithmetic on a nil value".
Interessanterweise funktioniert der Export zwischendurch wieder. Was ist zu tun?

Sorry, i am looking for a solution for Lightroom 5.6
Von: Lilybiri
Gesendet: Donnerstag, 2. Oktober 2014 11:19
An: René Ammann
Betreff: Export von Bilder
Export von Bilder
created by Lilybiri <https://forums.adobe.com/people/Lilybiri> in Import/Export - View the full discussion <https://forums.adobe.com/message/6783776#6783776>

Premiere Elements 7.0 Fragen Export von Datei

Hallo zusammen,
meine Firma hat sich nun Premiere Elements 7.0 geleistet für den ein oder anderen Filmschnitt, den wir für größere Veranstaltungen in PoweerPoint Präsentationen benötigen.
Davor habe ich immer mit Magix 15 geschnitten und hab nun 2 Fragen zum Videoschnitt bzw. Export von Dateien.
1. Grundsätzlich ist es ja möglich ein Bild in eine extra Spur einzufügen, damit dieses dann im Video erscheint. Ist es aber auch möglich dieses Bild zu verkleinern, so dass sich die Größe bei jedem Frame um ein Pixel vergrößert?
2. Ich benötige die geschnitteten Dateien als MPEG1 und MPEG2, allerdings kann ich als Export nur Microsoft AVI und DV-AVi neben den Bilddateien auswählen.
Ich habe aber schon als Import MPEG Dateien registriert, was muss ich also noch machen das ich die Dateien als MPEG oder z.B. mov ausgeben kann.
Vielen Dank erstmal!

Marcy,
When you do re-size the photos, I'd also check closely to make sure that you do not have any gaps in your Timeline. If you are editing in Scenline, switch over to Timeline and Zoom in so you can see single frames. Step through your slideshow, looking for any gaps. Usually, "Failed to return frame" will happen if there is so little as a one-frame gap.
Also, the Rendering of your Project is completely dependent on your CPU. with a 2.0GHz CPU it will take some time. Also, the CODEC to compress the files, say WMV 9, will require even more time, as will any Effects that might have been added. This is pretty much life with any NLE. Even my dual quad-core workstation takes some time to Render.
One last suggestion, when you go to Export and Render, you might want to make sure that your AV, pop-up and spyware programs are shut down. They take quite a few CPU cycles and can bog down the process.
I'll bet that one, or both, of Steve's links will address this, plus more.
Good luck,
Hunt
[Edit] Just reread your post and it appears that you constructed your slideshow in PSE. That should NOT leave any gaps, so my warning about them might well be moot. Still, it never hurts to check the Timeline in PE, just to make sure, since that is a main cause of the error that you got.

PCO Alias, Subscription Item, Notification Import/Export

Hi experts,
Is there any easy way to import alias to PCO? I know there is xml import/export option.
But in UDS there was comma delimited text file import option. Is there any option in PCO alike in UDS? We have 800 tags for notification and it will be very difficult and painful to import them manually.
Thanks..

Hi,
Thank you for your quick help and answers. I've thought about this, i even tried. But i hoped there should be some standard option. But as i understood there isn't any option, except tag alias.
I dont want to change this thread status to solved. I want they see this and at least add such import properties to PCO for next versions. Because even XML import option is working very bad and difficult. e.g. if you have the same agent instances or destination channels etc., it is not overwriting well, it is giving error and so on. The xml file understandable but there are lots of data in it. We will need to code some programs for making such XML file...
Anyway thank you again...

Questions on Subviews and Import/Export in Data Modeler v3 EA1.

I have a few questions about the capabilities of Data Modeler v3 EA1:
1) Is it possible to rename subviews? Would like more meaningful names then Relational_x - Subview_x.
2) Is it possible to save documents at subview level?
3) Is it possible to import/export subsets of data?
4) Having problems importing Erwin 7 .xml file, is there known problems with this import?
Judy

Hi Judy,
1) To rename a subview just right click on it in the browser tree and select "Properties". In the properties dialog change the name and click OK button.
2) You can save a subview as new Data Modeler design - from the File menu select Export -> To Data Modeling Design. In the newly opened dialog select the subview you want to export and click OK button.
3) After saving a subview as new design (see answer #2) it can be imported in some other design (File -> Import -> Data Modeler Design).
4) What kind of problems do you have with import of Erwin 7.* xml file?
Regards,
Ivan

How to import/export data in pl/sql developer

how to import/export data,table script in pl/sql developer.
By using the export functionality i am getting the dump file.I want a sql file.How do i do it?
And i want the data in csv file and table script in a sep sql file.How do i do it?

<li>run your query in "Query Builder"
<li>Right-Click on the Query-Results
<li>Click "Export"
<li>Click on the "Drop-Down" in front of "Format" and choose "insert"
<li>Provide the location and name of ther "sql" file.
If you want output in CSV format, choose "csv" from the "format" drop-down.
HTH

Getting an error while importing/exporting the universe from my BO Designer

Hi,
   I am facing a issue while importing/exporting the universe from my BO Designer to the Server.The error is mentioned below.
   'File Repository Server Input is down'
   Once I click the OK button on this error message, it displays the message
   'Could not import the Universe'.
I tried the check the status of the File Repository Server (Ouput and Input) and also the of the Root Directory on the Physical Server and also my machine.They all have read-write access.
Installed Version of the Universe Designer Client: Business Object XI Release 2 SP3
Installed Version of the BO Enterprise Server: Business Object XI Release 2 SP2
Can you please help me to resolve the issue

Hi,
   The step you have mentioned may not be applicable to my issue as one of my colleagues can import/export the universe from the same server
The second thing is that a DB2 Client v9 is installed on both mine and my colleagues system.The Designer software can recognise the DB2 drivers on his system but it cannot recognise the same drivers on my system.I even checked the versions of the BO software installed on his and my system and they are same.
The only difference is that his machine is a Windows XP Machine and mine is a Network Desktop.
Will any of the above two things will affect the operation of the BO Designer.
Thanks
Prabhakar Korada

Attunity connectors for Oracle in Import Export Wizard in SQL Server 2008 R2

Is there a way we can see the Attunity connectors drivers in the Import/Export Wizard (64 bit) for SQL Server 2008 R2?
Although I made it work for SSIS, I would need these drivers in the Import/Export wizard so as to automate it for numerous number of tables which I want to migrate.
Can the Attunity connectors for Oracle be used in the Import/Export wizard? If so please let me know.
Regards,
Ashutosh.
Ashutosh.

I have 100 tables to migrate. Creating a data flow for each table is tedious and that's why I was looking out for a way to do it through import export wizard so that I don't have to create a separate data source and destination for each table in the Data
flow Task.
Is there a way to loop through all tables and transfer data in SSIS without having multiple sources and destinations created for each table? This also involves a bit of transformation as well.
Regards,
Ashutosh.

Import/Export von Personen Tags

Similar Messages

Maybe you are looking for