Import/Export with generic ODBC

HI,I work with Hyperion Integration Services API to migrate DB schema (in using commandes like IMPORTMODEL / IMPORTMOTL...) in several environments. I'd like to supress ODBC drivers for each database and use a generique ODBC. Can I use parameters with IMPORTMODEL to realize this ? Do other commandes exist to performing same tasks?Thanks on advance for your help.

Dear Friends,
I want to import it, since that schema is archive schema, data is not important, so import process will get over soon and why I want to do two import, one is with data and another is without data.
I really appreciate your interest in resolving things.
Thanks
VK

Similar Messages

Error creating a multisource data foundation with generic odbc connection

Hi all,
we've created a generic odbc datasource connection to a Pervasive database.
When creating a single source data foundation and universe with this connection everything works fine.
When we try to create a multisource data foundation we can add the connection,
but while trying to expand the connection we get the error message "Owners are not available".
Same message when trying to inert a table.
(We've created both a 32 bit and a 64 bit DSN)
System: BO 4.1 SP2 PL3
Any ideas?
Thanks,
Silvia

Hi Silvia,
The generic odbc is not a supported connection for a multisource universe.
This information is available in the product availability matrix.
1. Log into the SAP Support Portal
2. choose the Tab for Release & Upgrade Info
3. Choose the Link Product Availability Matrix.
Hope this helps!
Jacqueline

Import/Export with no rows option

Dear friends,
I have to perform import few schemas, viz RDS, SDS, ADS.
RDS & SDS ( reporting db schema, staging db schema) should be imported with data and ADS without data. In a single import, is that possible? If so, how to import it?
Thanks
Venkatanathen ( [email protected])

Dear Friends,
I want to import it, since that schema is archive schema, data is not important, so import process will get over soon and why I want to do two import, one is with data and another is without data.
I really appreciate your interest in resolving things.
Thanks
VK

Export/import masters *with* adjustments?

Hi,
I've a Mac Pro with my main Aperture installation, and a Mac Book with an Aperture installation for when I'm travelling. I would like to export masters and the adjustments from the Aperture library in the Mac Book and import them in the Aperture library in the Mac Pro.
Any advice? Aperture 2.1.

OK, I figured it out myself. Here's what I did. If you do this and manage to mess things up, it's your responsibility.
I have an external hard drive with a vault that contains the backups of the images on my Mac Book. I connected that drive to my Mac Pro. I showed the vault's contents with Finder, and similarly the Mac Pro's library contents. I copied the X.approject that contains the files I want to import/export with adjustments and other metadata from the vault to Mac Pro's library. Then I started Aperture by pressing Option/Command, and rebuilt the library.
It worked fine, I have the ratings and white balances etc. copied with the images.

Import/export route targets from E-BGP ?

hi all,
a newbie question again,
can i import/export rte target in a vrf from/to ebgp session,
in all my readings i only see samples from import/export with iBGP peering
thanks for answer

Yes you can do it this way as well, without the MP-EBGP peering between the both AS's RR's. (You have missed the multi-hop neighbor statement)
This will achieve the RT exchange between the PE's, so next you will have to import that RT on the other side.
Once you have the RT with the routes exchanged you will have VPN labels as well populated for the routes on the remote side.
Now you will have to implement a method to assign an IGP label on top of the VPN label (this label should be for the PE's loopback of AS 100 who advertised this route to AS 200)
In your case, you can use the send-label command at the ASBR's for the IGP route of the PE;s in their AS' with a label. For this you can redistribute IGP into BGP and again BGP into IGP (with a route-map matching only PE's loopback in their AS and the remote AS).
So you will effectively have 2 labels to switch traffic between the AS's (IGP and the VPN label).
HTH-Cheers,
Swaroop

Import from database an internal table with generic Type : Web Dynpro ABAP

Hi everyone,
i have a requirement in which i'm asked to transfer data flow between two frameworks, from WD Component to another. The problem is that i have to transfer internal tables with generic types. i used the import/ export from database approache but in that way i get an error message saying "Object references and data references not yet supported".
Here is my code to extract a generic internal table from memory.
    DATA l_table_f4 TYPE TABLE OF REF TO data.
FIELD-SYMBOLS: <l_table_f4> TYPE STANDARD TABLE.
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
DATA: ls_indx TYPE indx.
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->fire_vh_search_action_evt( ).
ASSIGN l_table_f4 TO <l_table_f4>.
*-- Import table for Help F4
IMPORT l_table_f4 TO <l_table_f4> FROM DATABASE indx(v1) TO ls_indx ID 'table_help_f4_ID'.
The error message is desplayed when last instruction is executed " IMPORT l_table_f4...".
I saw another post facing the same problem but never solved "Generic Type for import Database".
Please can anyone help ?
Thanks & Kind regards.

hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
           field1 TYPE ztab-field1,
           field2 TYPE ztab-field2,
*your own fields here:
           field TYPE i,
           field(30) TYPE c,
           END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec

Export/import text with all styles (indesign CS3 (XP SP2))

I'm looking for the best way to export text so authors can edit their text using MS Word, Excel or xml. (they don't want to use Indesign). after they are done editting I want to import the text back into Indesign (with par, char, obj styles).
I know how to import/export to .doc with styles, but this doesn't work for table, object styles, and page breaks.
Xml tags or plugin/software might be a solution.
I've searched the forums, google and read the help file, but still don't know what the best/quickest solution might be. ... ?
thanks in advance

1. Those programs don't support every feaature of InDesign, so you are out of luck.
2. If they don't want to use InDesign, ask them to use InCopy, that is the only one programm which supports the whole InDesgin-functionlity
3. Page breaks should never be done manually, never in Word, neither with InDesign. They should be created via paragraph styles in both program, but with the import options is a checker to get Word's page breaks.

Has anyone had issues with Administration\Data Import/Export\Data Import???

Has anyone had issues with Administration\Data Import/Export\Data Import???
I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly using this standard function to import supplier prices to their master price list, but now it has failed?
I have looked at the file they are importing and it appears to be fine.
On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
Has anyone any ideas or is aware of performance issues like this?
Thanks,
Ian

Always an option, but would you give your clients access to this tool?
Not sure really.
I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
Kind regards,
Ian

Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

My HDD crashed and I had to reinstall my boot and programmes on a new HDD. I managed to recover my library.itl. How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

It should be like the very first time you synced your phone with I-Tunes. It will notice you haven't synced before and just copy everything from your phone into I-Tunes. It shouldn't delete anything from the phone, at least it never has for me. It just puts a copy of everything into I-Tunes and even if you delete an app for example from your phone and you decide you want it back later, you can just go back into I-Tunes and copy it back over. Hope this helps.

Colours trouble with a psd file after import/export through Lightroom 4

I'm working with CS5, and I just bought LR4. I took a psd file (in Adobe 98 space) and I imported it in LR 4, and the exported as psd file in Adobe 98 colour space. Both files, the original one and the other after import/export, are quite different. The saturation of the res is not the same... When I repeat this experinece with a psd file in sRGB or in Prophoto, I have no difference betwwen both files.
I then conclude that LR doesn't recognize the adobe 98 pprofile of my psd file.
Is that normal, have you tried this experience, is there a bug in LR or a bug in the way, I proceed?
Best regards

When you import there is an Advanced button in one of the dialogs. Click that and you will be able to Paginate against chosen styles. That will break your document into topics.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Importing/Exporting clock reference with 5133

Hello-
I am using SignalExpress for some simple DAQ. I would like to either import or export a clock reference to lock to my signal source, but have been unsuccessful.
Signal Express does have a tab in which I can choose the PFI1 as the reference clock, however I"m greeted with the following...
Error -1074135022
Possible reason(s):
Attribute or property not supported.
Device: Dev2
Property: Reference Clock Source
Status Code: -200197
The 5133 manual suggest that importing/exporting the clock is in fact an option.
Is it just not an option through Signal Express? Do I need to make my own VI with the DAQ-mx VI's? Maybe the reference I'm providing it is incorrect and it knows?
Brandon

After some more investigation...it appears that you cannot export the reference or sample clocks OUT on the PFI line of the 5133.
However...it does appear that you can IMPORT a reference clock.
As mentioned above...SignalExpress doesn't seem very happy when you try to do this.
I found a program in this thread.... http://forums.ni.com/ni/board/message?board.id=250&message.id=41035&query.id=2207663#M41035
...where the author makes their own scope using the NI-SCOPE VI's.
I modified the program using the ConfigureClock.VI to import a reference...however only with the same error message of this task not being supported by this device.
What am I missing?

Production Premium CS6 syncing problem with premiere to after effects. "The importer reported a generic error."

I have CS6 Production Premium suite. I've had it and it works fine on my laptop for a couple years and just bought a new apple desktop and now when I have a project in premiere, it won't allow me to send it to After Effects. I keep getting a "The importer reported a generic error." Really need to get this problem resolved as the laptop is not as fast as it used to be, and I'm working on a short film haha.
Thank you for your time and help.
All the best,
Brandon

Hi Brandon,
ascarib wrote:
After doing the reboot my computer gives me the "You can't use this version of the application "Adobe After Effects CS6" with this version of OS X. Nothing has changed on my computer but it was fine before. What else can we try? Thank you for your patience.
Make sure that you update After Effects: Can't launch | Mac OS X 10.9 (Mavericks)
Thanks,
Kevin

?BUG? App Export / Import error with javascript

Greetings -
Anyone have an idea on how to get around this or if I'm doing something wrong?
I have a page button to collapse a tree, with a URL Target of:
javascript:apex.widget.tree.collapse_all($v(P2130_TREE_ID));
Page and button work fine, have never had a problem. Until I went to do an application import and found that the SQL file for the import was corrupted due to the above line. SQL file has:
p_button_redirect_url=>'javascript:apex.widget.tree.collapse_all($v(P'||to_char(2130+www_flow_api.g_id_offset)||''_TREE_ID));',
It appears to have an extra (2x) single quote right before _TREE_ID. I have this logic in several places in my application and every place caused the same error.
Application copy also fails with same error.
Thanks,
Scott

Tom -
I assume this is the prior post you where talking about : https://forums.oracle.com/thread/2401714
However, this doesn't cover my problem. I have tried all the follow, and they all break export / import and copy functionality due to mismatched quotes:
collapse_all($v(P2130_TREE_ID));
collapse_all($v('P2130_TREE_ID'));
collapse_all($v("P2130_TREE_ID"));
collapse_all('&P2130_TREE_ID.');
collapse_all("&P2130_TREE_ID.");
These all allow the collapse button to work.
NOW, if I change my ID tag to be something like 'P_SCOTT_TREE' then everything works just fine (import/export/copy). It's having a number in the tag that is cause the problems because the export is casting it to_char and somehow throwing in an extra quote.
Thanks,
Scott

Export and import tables with and without data

I have few table which i want to take export with data and some without data, and import that in new db? Send me the command plz for this.

exp and imp all have a flag
ROWS import data rows (Y/N)
but that flag apply to the whole export/import process.
You will need do export twice,
ROWS=Y first with list of tables that need data
and ROWS=N with list of tables without data.

Import/Export with generic ODBC

Similar Messages

Maybe you are looking for