Import extended IDOC to Integration Builder

Hi All,
I´m faced with the following situation using an Idoc with customer extension from a SAP R/3 40B System with my scenario:
IDX2 - Import works fine, basistype and extension in place
Integration Builder: Can ´t see the extension with or without the idoctype but the standardidoctype only.
Thanks for any help.
regards
Carsten

Thanx very much for your reply,
the problem actually is in detail:
I try to import the IDOC-structure into the Design of Integration Builder - what did work for some other - but non-extended IDOCs earlier.
When I start the import I can ´t find the extended IDOC in the list of downloadobjects, but the (related) non-extended standard-IDOC only.
When I import the object that is listed as being non extended it actually is.
I wondered whether the IDOC-extension or the IDOC itself might not be valid so I checked Releasestatus in R/3-Systems what looks good and tried to upload the metadata with IDX2 - it worked.

Similar Messages

  • Not able to import SLD objects into Integration Builder

    Hi,
       while importing objects from SLD into Integration Builder , am getting no authorization to import objects from SLD.
    Plz let me know how to solve this issue.
    Thanks,
    Satya.

    Hi Satish,
    Check the link and aks your Basis/Authorization team to provide proper Roles to your user.
    http://help.sap.com/saphelp_nw04s/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
    http://help.sap.com/saphelp_nwpi71/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
    Regards,
    Naveen

  • Importing Software Components into Integration Builder (Design)

    Hi
    I have successfully installed XI 3.0 and have done post installation configuration.  Could you please point me 1.  how to apply the patches specified in the document
    I have created Technical system and Business system to associate with it. Now I want to import those software components from SLD into my design time Integration Builder.  While I do this I am gettin an error "Interal Occured" - Details of the error list 2 numbers one being Null Point Exception.  Could you please tell me what could be the possible problem and the way to resolve.  Is there a do it yourself kind of a document to learn development in XI, ie step by step instruction right from Data object, message object, interface object, business scenario creation etc.
    2. Is there a special step to follow to get the Adapters link up and running withing XI 3.0 web browser. Cos. at the moment, its invoking another window with local port number followed by :800, but it has an error saying "File Not found"
    Please reply, really appreciate it.
    Best Regards
    Shiva.

    Hi Shiva,
    your second problem should be resolved, if you apply all available Patches to XI 3.0 (i.e. until SP Stack 03). I guess, that also the internal error in Integration Builder will be resolved by applying the patches.
    There is an OSS note 670388 that explains how to patch XI 3.0. It should explain all your questions towards patching.
    I would suggest to apply all patches and then check again, if those errors mentioned still exist.
    Best Regards
    Christine

  • Problem with importing software components into Integration Builder:Design

    Hai everyone
    I m trying to import software component versions,through SLD in PI 7.0
    It says unable to read software component versions from SLD        "nw2004sxi:50100"
    where nw2004sxi is my computername and 50100 is my j2ee http port.
    Your help would be highly appreciated.
    Regards

    Hai there
    I have been finding difficult to find the solution to my problem.I would really appreciate if someone can see my error log clearly.
    Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
    Stack trace for the above error message is:
    com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
         at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
         at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
         at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
         at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
         at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0.getXIDomain(SLDAgentObjectImpl0.java:375)
         at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
         at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
         at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:137)
         at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:100)
         at com.sap.aii.mdt.util.MmMainModel.getMsgCompList(MmMainModel.java:262)
         at com.sap.aii.mdt.util.MmMainModel.getListModel(MmMainModel.java:244)
         at com.sap.aii.mdt.util.SelectModel.getListModel(SelectModel.java:135)
         at jsp_monitor_new1288070144218._jspService(jsp_monitor_new1288070144218.java:188)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:418)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:349)
         at com.sap.aii.rwb.web.messagemonitoring.viewcontroller.MmDynPage.doProcessBeforeOutput(MmDynPage.java:69)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
         at jsp_FC_Secure1288070041500._jspService(jsp_FC_Secure1288070041500.java:26)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    5 Message(s) :  SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.01.nw2004sxi - Integration Server unable to specify a JCo client - No component names available from Integration Server -
    Hope i can get the solution for my problem.I m sure u wil get rewarded with points
    Regards

  • Import RFC/IDOC error

    Hi all,
    I am following "How to...push data in to BW from XI."
    In the 5th step in the document it is given
    Choose "Import RFC/IDOC" in the context menu of "Imported Objects" and enter your user data to logon to the BW system.
    Select the function module /BIO/Q16ASENDXMLDATATOBW_RFC
    Press "continue"
    Press "Start"
    But when I do this I am getting a java nullpointer exception error com.sap.aii.ibrep.sbeans.upload.remoteuploadexception:jsva.lang.nullpointerexception
    I am using jre1.4.2_10 and java web start version 1.4.2
    Please help me in resolving this issue.
    Regards,
    Aanand

    Hi Anand,
            Can you pls make sure that no other users have this same RFC imported into your XI integration builder and is waiting to get their change list activated. In that case also we get the error in importing...
    check these links also.
    Error importing RFC / idoc despite following note 769356
    Cheers
    JK

  • How to import Custom idoc into  IR?

    I have a custom idoc and i need to map it with the receiver format after importing into IR . Please let me know the sequence of steps to import custom idoc into  Integration repository?
    I think I need to first import into IDX2 and then import into repository. Am I correct?

    Hi Prateek,
    thanks for the information .The normal standard idocs we import by searching the idoc eg- for importing matmas we type mat and we search it, since it is a standard idoc it will be available in the list (after selecting the chek box "Import of idoc or rfc interfaces from sap system permitted").
    But my question is how we import custom idoc as they wont be present in the list?

  • Unable to import Basis (R3) objects to Integration Builder

    I am trying to import RFCs and Idocs to the Integration Builder, but am getting the following message.
    Unable to establish connection to R/3 system sapdtdb (system=00, client=010) Troubleshooting tips:
    Is the target system online?
    Check the connection data (note that server names and groups are case-sensitive)
    Tips for administrators (see the configuration guide for more details):
    Does the user have the required authorizations in the target system?
    Is the target system configured correctly in "etc/services"?
    I have checked the radio button on the software component for allowing Import Of RFC and Idoc interfaces.
    I have checked on both the PI and the R3 system that the entries in SM59 are correct and that login and connections are permitted.
    On our old XI system, I am able to import objects, but on our new PI system I am getting the above error.
    Does anyone have any other possible solutions to this please?

    Chris,
    Please check whether have done all the steps given in this link or not for your new PI system:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
    If you done all this you should be able to import the IDocs and RFCs without any problem.
    ---Satish

  • ERROR, while i importing file in Integration Builder/

    Heading 2: HI every body !!!!
    please help me.
    Now' i'm integrate SAP r/3 and IBM MAXIMO via SAP XI3 (SAP netweaver 2004s)
    i need to import file to integration builder, while i'm importing it, I'"ve got the error:
    ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
    sapmaximo\sapmnt\IPC\SYS\global\security\data\SecStore.properties" does not exist although it should..
    Also i did PrtSc
    Link:[http://ipicture.ru/Gallery/Viewfull/17818229.html]
    I am a beginner in sap netweaver please tell how to solve this step byb step

    I need to import file (XI3_0_IMEA-INTEGRATE_IMEA71-mySAPERP2005_of_ibm.com_5.tpz),it''s in another format , so
    i find on this forum the same error Link: [Error while generating Rules in GRC5.3  RAR Component;
    the solution of this error ---"
    Another reason for this error can be lack of resources or pool size of the server. The recommended settings for the Pool size are :
    Max Pool size : 50
    Max connections : 100
    Connection Timeout : 10 sec
    Max wait time : 30 sec"
    Can you tell me where i can configurate this settings? (step by step)

  • How to do configuration in Integration Builder for Idoc to PI to EDI system?

    Hi Experts.
    I am working on one interface which is SAP IDOC (DESADV.DELVRY03) >> to>> PI >> to>> EDI system.
    I am done with all ESR objects,
    Can anyone help me about how to and what configuration required to be done in Integration Builder?
    And after configuration how should I test/check my interface?
    Please give your suggestions.
    Any suggestion will be rewarded.
    Thanks in advance.
    Regards,
    Dipen.

    Hi Dipen,
    Configuration:
    SAP ECC
    You have to configure the Output types in NACE and Partner Profile in WE20 properly.
    SAP PI
    In PI, You have to configure the port in IDX1 and load the meta-data in IDX2.
    Testing:
    While on saving the Delivery document, IDoc would be triggered and it would be routed to PI based on the port that you have configured in the partner profile.
    You can check the status of the IDoc in WE02/WE05. Check the tRFC queue in SM58 whether the IDoc is struck in ECC due to any communication issues.
    In PI, you can check whether the IDoc is received or not in the transaction IDX5. If you double-click on the message, it would be routed to the message monitoring.
    The status of the message in the receiver side can be checked in the communication channel monitoring.
    You can let me know if you need any more info.
    Thanks,
    Kanda

  • How to import stuff from SLD to Integration Builder ?

    Hi All ,
    I have done all my definition and configuration in SLD - Product definiton, Technical System, Business system,  SWCV , SWC , logical system - everything is in SDL.
    When I go to' IB:design' and 'IB:config' I don't see anything I created in SLD?
    I guess this is because the very next step should be to import all this stuff from SLD into  Integration Builder.?.I read some posts on the forum but it is not clear  where this is done :
    1.should I do it first in  IB:design or in IB:configuration  ?
    Can you please tell me how this is done technically and in what order - from wich menu and how?
    2.And what is Enviroment->Clear SLD Data Cache used ? Do I have to use it and at which point?
    Looking forward to your reply asap..Thanks all in advance..
    Regards,
    Boby

    Boby,
    If you do all the configuration in SLD only thing you have to import is the software component into Design and create your namespace and all the objects.
    In Configuration you have to import your business systems and do all the routing rules.
    Check this weblogs for step by step procedure for an end to end scenario:
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
    <i>
    2.And what is Enviroment->Clear SLD Data Cache used ? Do I have to use it and at which point?</i>
    If you change anything in IR and ID and this new changes do not reflect in your scenario then we do this normally.
    Also check this document for all the caches in XI:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
    ---Satish

  • Error while importing s/w component verion in Integration Builder

    Hi There,
    I am getting below error while importing software components in System Landscape directory.
    "Unable to read software component verion from System landscape directory "SAPXI:50000"
    Path
    In Integration Builder> Tools>Transfer from System Landscape Directory-->Import software component Verion
    Please suggest.
    Thanks,
    Nishant

    Hi,
    Check these Similar Ones
    "Unable to read software component versions from System Landscape Directory
    Unable to read software component versions from System Landscape Directory
    http://****************/Tips/XI/SWComponentError/Resolve.htm
    Regards
    Seshagiri

  • Custom directories for export/import for Integration Builder

    Hi,
    XI uses default directories for exporting and importing Integration Builder objects, and there is no option to change the directory or to pick up objects from another directory.
    Does anybody know of any way we can change the default directory that XI uses? Maybe some system setting hidden somewhere deep?
    Thanks and Regards
    Manish

    Hi Manish,
    when there's no way there's always an <b>XI way</b>:)
    you can help your basis team using XI
    set you file adapter to monitor export directory
    and try sending your xi export files to a different server/location
    you can have a look how Felix did similar scenario: 
    /people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
    isn't this a good way ?
    Regards,
    michal

  • Import of modified/extended Idoc into XI repository

    Dear all,
    we have to import a modified/extended Idoc from R/3 into XI repository.
    When I do that in the normal way, I get only the original Idoc structure without our additional segments.
    The Idoc is SDPICK.SDPIID01 where we added additional segments.
    Any help is very much appreciated.
    Thanks and best regards,
    Philipp

    Hi,
    IDX1 & IDX2 is for metadata check these links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    Thanks,
    Prakash

  • IDOC / Integration Builder  -- contains errors (unable to read segments)

    HELLO,
    I have a problem. I have created a new IDOC. but when I imported to the KIntegration Builder it says:
    Import started...
    ZHRMD_IT.ZHRMD_IT: Error
      + Error: IDoc type ZHRMD_IT contains errors (unable to read segments)
    Import failed with 1 error.
    The rare thing is that the idoc is a copy of another idoc of SAP (HRMD_A06) but I have taken out some E1Pxxxxx.
    Its like a reduced Idoc but as a new idoc.
    Can Someone help me, please.
    How can I see what segment is wrong in the new idoc (ZHRMD_IT)?
    Thank you
    Pablo Mortera.

    Hi,
    As per the error , you are importing some custom idocs.
    Go to WE30 and check that, all the segments in the idoc has got released or not ..
    <i>All the segments are the sap stardard segments.</i>
    >>You may be using standrad segments, but in custom idocs right.Anyway check, idoc and its segments are released or not..
    Then start importing the idoc into IR..
    Regards,
    Moorthy

  • Business System not imported to Integration Builder

    Hi,
    I have created the Business System in SLD and when I imported that into the Integration Repositoty, I am unable to locate the same. Could anyone let me know the problem in this?
    Regards,
    Ram Mohan Naidu

    hi,
    you don't import business systems into repository
    you can import them into Directory
    you can only import <b>Products</b> ans software components into Repository
    Regards,
    michal

Maybe you are looking for