Import external file

Hello,
I would like import an external fine in my project.
Thanks.
Rosaria

Hi Roman!!
I have imported java files, but I have a problem... when I use List<> I have tehe follow error: generic are not support in -source 1.4 (try -source 1.5 to enable generics). I think the problem is the java version, but I have installed Java 1.5. Can you help me?

Similar Messages

Error importing external files in flash cs6

I am getting this error message when I try to import image files into my flash CS6 animation: "Unable to load external importer C:\Program Files\Adobe\Adobe Flash CS6\es_ES\Configuration\Importers\PhotoshopReader.dll". I am using Windows XP SP3.
Thanks.

The file was in the directory. We finally solved it by installing SP3 again.
Thanks,

Exporting definition of the external file - please help.

Hello to all of you wonderful people.
either me or my machine are just about to jump out of the window here..
I have imported external file into OWB - no problem at all - everything singing and dancing.
I now need to export this file and 'tweak' it a bit, rename and reimport - to save typing gazillion column names for other files i have to import.
It was possible to do so in OWB 9i, however, everytime i am trying to do it i get this error message:
Warning: MDL1427: Cannot export selected PROJECT <ADMIN> because it does not exist in target repository.
Firstly,Of cause it is not in target repository - it is an external file! once i load my target table with it,it will be in target repository.
secondly, I DO NOT HAVE A PROJECT CALLED <ADMIN>...
Googled it and searched oracle, technet etc - to no avail. found only one entry for it on this amazing forum... but no solution :(
Dearest Tom OWB it was your post about a month ago - did you manage to find out what that mean and how to go about it?
Any help/hints would be greatly appreciated.
Thank you very much for all your help and support regarding this issue.
Kind Regards
Vix

Now I remember!
There are two different ways to export the metadata. Clicking a project or object name less options and for me the error above.
However if I click on the project and go to the top menu and to Design > Export > Warehouse Builder Metadata I am able to export the metadata fine. You also get access to the advanced tab this way.
Bit strange but awell.
Cheers,
James

How to import external table, which exist in export dump file.

My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
Naveen

Hi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen

Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?

Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?
I can import the Raw file successfully but cannot see any edits that were applied in Capture One. Im assuming no but just checking.

Your assumption is correct, Capture One, Lightroom and other third party raw processors have their own proprietary processes and profiles for rendering the raw data.
They do not make permanent changes to the raw data and store the changes to an .xmp file or to a catalog file like Lightroom.

Why can't I import video files from an external hard drive?

I am using Adobe Premiere Elements 12 on Mac OSX 10.7.5 trying to import video files from a Lacie Rugged External Hard Drive using both firewire and usb, neither with any luck. The error message I receive is:
"You're trying to import a file from a DVD or a Removable Media. Please use Video Importer for importing Videos and Image Importer for importing images. "
We can't import through the video importer either because the hard drive doesn't show up. We can, however, drag the videos to the desktop and do it that way but we'd like to avoid doing that if possible.
Thanks
By the way, the external hard drive is formatted FAT32 if that matters

Tacomedia
http://www.cnet.com/how-to/how-to-set-up-an-external-hard-drive-for-use-with-os-x/
Please check out the above with regard to your external hard drive FAT32 and Mac computer question
By the way, the external hard drive is formatted FAT32 if that matters
SG has already commented on this in his initial reply to you. I thought that the above might blend in to supplement what he has said.
I will watch for further developments in your troubleshooting with SG.
ATR

Importing .mxf Files from an external hard drive...

Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
Okay, I'll stop typing. Thank you so, so much for any help.
Tom
PowerMac G5 (Dual 2.3 GHz) Mac OS X (10.4.6) Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
PowerMac G5 Mac OS X (10.4.6)

The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
Hope this helps.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there.
I go through all the instructions but then my emails do not appear. I'm starting to panic a bit!

You might want to try asking on the MS Office Outlook forum - http://answers.microsoft.com/en-us/mac/forum/macoutlook - since those are Outlook files.
Also note which method you're using to create a backup.
Clinton

How to import video files from external hard drive?

I receive an error "You're trying to import a file from a DVD or Removable Media. Please use Video Importer for importing Videos..." however when I try this I still cannot import video files. This is extremely frustrating as we have 32 copies of this software and this is sarting to become a common issue. Please help and many thanks.
Attached is a screenshot...

jasonkmtr
Premiere Elements 12 Mac
A few more questions for now.
Taking your particular .avi files out of the equation, can you import any other format from Add Media/Files and Folders pointed to this external hard drive? What is the format of the external hard drive? NTFS or FAT32?
It is my recollection that AVCHD.avi has always been reported as highly problematic. Yet you seem to be saying that you have no problem importing them in to the project from the desktop with the program's Add Media/Files and Folders/Project Assets to Expert workspace Timeline.
Did you purchase your Premiere Elements 12 from the Mac App Store or from Adobe? If Mac Store, what do you have Adobe Premiere Elements Editor or Adobe Premiere Elements Quick Editor or some variation thereof?
You wrote
A number of users are experiencing this issue - they connect their hard drive, load Elements, start a new project and go to add media (from the ext hard drive) using the files and folders option.
Could you supply more information on this via link(s) which have reported this issue.
Thanks.
ATR

When importing a flash animation into captivate flash will not call external files

Is there a way to import flash into captivate and it still be able to call external files (ie. sound, video xml)? When I import flash into captivate it will not call any external file.

Hi all
Wow, I was so hoping fellow Adobe Community Expert Paul Dewhurst would pop in on this thread.
Why? Well, Paul sent me a way cool gizmo a while back that hacked the Info button. It used an external file for some of the information! So somehow Paul managed to sort what it took to insert a Flash object into Captivate and have that object extract data from an externally located file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Imported source file name changed for the external table

Hi,
I have external table from flat file. Now the source file name is changed. I can change the file location to point to the new file name, but I can't update the source for the flat file property(as seen under flat file properties,structure tab. the column "Sampled From"). Is there way to have this update without having to import the file using the new file name again?

In the Files section in the object navigator find the flat file you want to change the source of.
Double click on the actual file, and on the General tab change the old file name to the new one.
The fact that it has been sampled from a different file should not 'disturb' the working of the external table.
However, if the structure of the new file is different I'd suggest to resample.
Good luck, Patrick

Can´t import R3D Files from external HDD

Hello everyone,
Hallo Zusammen,
I´ve got a huge problem with importing files from my external Thunderbolt Drive. It´s from LaCie, a 6TB Version connected to a Mid 11 iMac.
Ich habe ein großes Problem beim Import von meiner externen Thunderbolt Festplatte. Es ist eine von LaCie mit 6TB, welche mit einem iMac Mid 2011 verbunden ist.
Since I´ve upgraded from OS X Mavericks to Yosemite I´m not possible to import my R3D Files (Raw footage from RED Camera) from the Thunderbolt Drive anymore. There was no problem
Seit ich meinen Mac von Mavericks zu Yosemite geupgradet habe, ist es nicht mehr möglich R3D Dateien (Rohdatenmaterial von der RED Kamera) von der Thunderbolt Platte zu importieren. Es gab
at this with Mavericks.
mit Mavericks keine Probleme.
I´m using Premiere Pro CS6. Importing R3D Files directly from the internal Drive sometimes still working, but with the LaCie it says: Not supported file format..
Ich benutze Premiere Pro CS6. Wenn ich R3D Dateien direkt von der eingebauten Festplatte importiere, funktioniert es hin und wieder, aber bei der LaCie kommt immer: Dateiformat wird nicht unterstützt oder ist beschädigt.
Same problem with Prelude - all my connections are lost.
Das gleiche Problem habe ich mit Prelude - alle meine Verbindungen wurden gelöscht.
Java Update is done.
Ein aktuelles Java Update wurde bereits durchgeführt.
Specs:
- 6TB LaCie Thunderbold
- Mid 11 iMac i7
- Premiere Pro CS6
- Java 8
It would be awesome if anyone could help me!
Es wäre großartig wenn mir jemand helfen könnte!
Thanks
Danke

Hey Kevin,
thanks for your reply. I fixed the problem.
I need to download these 3 programs from RED:
RED APPLE WORKFLOW INSTALLER
RED ROCKET-X™ INSTALLER
REDCINE-X PRO
After installing and restarting everything works fine - no other problems with importing the R3D files.
Donwload Link: Downloads - RED Digital Cinema
Hope it also works for the others,
best regards,
Marc

External file imported in flash

I need urgent help I need to import the hyperlinks from a
text file into my swf file at run time can anyone help me on
tht

well the problem here is I have an exsisting website in flash
where in the update panel i have some text that comes on runtime
from the text file which i can alter as an external file using
notepad
Now in that text i want to place links so when it is loaded
in flash the hyperlinks should be shown so that my user can click
the link and go the the required url.
I hope i made myself clear
Thx a million

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Luis Sequeira1 wrote:
b) Use an utility like Clipwrap or MPEG Streamclip to convert the mts file to a quicktime (mov) file
Luis,
Just to clarify one point…in order for Streamclip to convert the MTS I believe a plug-in like the AVCCAM QuickTime importer from Panasonic needs to be installed. (Credit David McClain over at the FCS boards for that info.)
Russ

Importing External HMTL files

Is it possible to import external HMTL files to iWeb then Upload to .Mac?
We have uploaded these external HMTL files directly to .Mac but find we do not have editing capabilities.

Is it possible to import external HMTL files to iWeb
then Upload to .Mac?
We have uploaded these external HMTL files directly
to .Mac but find we do not have editing capabilities.
Put them at
iDisk/Sites
Address will be
http://homepage.mac.com/yourusername/pagename.html
You can edit html files in any text or html editor. In TextEdit, to view the code in an HTML file, choose File > Open and select "Ignore rich text commands." Then locate the .html file and click Open.
If you want to use your existing html files with an iWeb site, check this out:
http://www.geocities.com/[email protected]/widgets.html

Import external file

Similar Messages

Maybe you are looking for