Import failed, because the sources are not contained in the archive
Hi,
I need to customized some configuration in the Component CPRXRPM_UI.
So I have created a Track to Modify the CPRXRPM_UI Component. When I am trying to Import the Compoent I am gettting the below error,
20090625182941 Info :Starting Step Repository-import at 2009-06-25 18:29:41.0130 +5:00
20090625182941 Info :Component:sap.com/CPRXRPM_UI
20090625182941 Info :Version :MAIN_PPM45VAL_C.20080919144429
20090625182941 Info :1. propagation request is of type TCSSoftwareComponent
20090625182941 Fatal :import failed, because the sources are not contained in the archive
20090625182941 Info :Step Repository-import ended with result 'fatal error' ,stopping execution at 2009-06-25 18:29:41.0131 +5:00
Can any one suggest the solution for the issue
Hi Baskar,
I am facing the same issue.
Wondering if you have figured out a way.
Please let me know what you did to achieve the desired result.
Regards,
Sumit Oberoi
Similar Messages
-
How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.
Each camera must be supported explicity and your LR version is years older than your camera.
According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
Camera Raw plug-in | Supported cameras
If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x. You can find the DNG Converter here: http://www.adobe.com/downloads/updates -
I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?
Hi,
I checked your account,your Export PDF subscription is in 'Pending' status.
Once it gets confirmed you will be able to use it.
Please let us know if you require further assistance.
Regards,
Florence -
How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The albums show as purchased on the iTunes store, but not available to download to my authorized device. I also have albums that appear in my library, but are not able to be added to my iPod from my computer
When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.
-
How can I remove duplicate songs from the iPhone4. The duplicates are not listed in the computer iTunes library.
The simplest thing may be to back-up and then restore the iPhone. If you don't fancy that then remove all media that is currently synced to it, then double check and manually remove any media that remains on the device, before reselecting your sync options.
If you've been manually managing the device and your library doesn't contain copies of all your media then see Recover your iTunes library from your iPod or iOS device.
tt2 -
Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
Does Lightroom 4 not work with the Sony A7?
Thanks,Lightroom 4 cannot read the RAW photos from a Sony A7
You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly. -
The last 2 songs I purchased, Treasure and Take Back the Night, are not downloading from the cloud on my iPhone 4 or my iPad2. I have tried previous suggestions on the support page. Can anyone suggest further solutions?
Hello BwarsIG88
Check your purchase history by going to the iTunes Store and then click on purchases. From there you can see all your purchase history and download what you are missing.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
-Norm G. -
When I take a picture or video with my ipad, the pictures are not shown in the camera roll or anywhere else I can find them. Can anyone help me?
When you take a photo there will be a small icon of the photo in the lower right corner. If you touch that it should take you to the photo in the camera roll.
If that isn't happening have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
The Executables are not pointing to the DataControl in the Page bindings.
Hi all
I am working in the Jdev 11.1.2.1 and weblogic 10.3.5.
I would like to inform you that,in my page bindings,the executables are not pointing to the Datacontrol and hence when i debug my page i am geting an empty page.
This is happening many times.
Inorder to solve this,i am adding one more executable to my executables and then when i c the executable pointing to the required datacontrol i delete the added executable.Then i am rebuilding the project and then i am running the page.Then i can see the page with the data.
This is happening many time and many times i did the same.
I want solution for this kind of problem.Why is this happening and whats the solution for this issue.
Please help me in this issue.Hi,
I am not sure what causes this issue.
1. Are you using ADF Libraries (model projects are deployed and used). If yes, does it work fine if you refresh the whole application (in the application navigator) and then run the page to see if it resolves?
2. When you open up the pagedef in overview mode, do you see the Datacontrol? If not, try refreshing the datacontrol palette and see if it works fine after that?
3. What happens if you do a build->clean all and then run the page? Does it work fine then?
-Arun -
"the repository does not contain all the required definitions"
Hello,
At customer's site, I experiment a problem with Powerdesigner Viewer version 16.5.3.2 (4343) to view content of the repository created by Powerdesigner 16.5.3.2 (4343).
I got the message "The repository does not contain all the required definitions. It cannot be used with this version of the Viewer.".
Is there someone having an idea of the solution ?
Kr,
Thierry de SpirletHello,
This article may help you configure the Viewer properly.
See KBA 1877837 (https://support.wdf.sap.corp/sap/support/notes/1877837)
I hope this helps,
Arnaud -
Changes done for the Site in the BCC are not reflecting in the Production
Hi,
we are using ATG10.0.2 BCC, application is based on CRS10.0.2
changing the asets for a site in BCC and deployed success fullly changes are there in the BCC but those are not affecting in production
In Production configuration of BCC i mapped Source Repository atg/multisite/SiteRepository with Destination Repository: atg/multisite/SiteRepository_production
please help me to reslove this issue
Thanks,
ChandrakanthHow about checking this?
Login into the DB and see if you have values changes getting reflected in the CA DB and prod DB.
If values are getting reflected in the DB then clear the cache of the repository.
If the values are not getting reflected in prod db then check the datasource property of that repository.
Peace
Shaik -
Change / Customize the "You are not connected to the Internet" screen?
Well the title says it really. *I'd like to change the page Safari displays when not connected to the Internet.* Working for a business that sells Macs, I'd prefer something that looks a little nicer when the network is down.
I know that it's a Localizable.strings file...
(located here: Safari.app/Contents/Resources/English.lproj/Localizable.strings )
*But if I change the wording in the file, when trying to load up the error page, I'm presented with "localized string not found".*
Any ideas? Thanks.I screwed the edit up but: duplicate the file to be safe before the edit and only edit 2nd text area after =,
/* title of error page displayed for NotConnectedToInternet */
"You are not connected to the Internet." = "You are not connected to the Internet because you haven't paid your bill."; -
I've updated my iphone 4 to ISO 5. I could not connect to icloud yet however does this expalin why some of the features of ISO 5 are not working like the camera lock screen feature?
Thanks
Cto see the camera icon, double-click the home button when you are on the lock screen. this will show the music controls and the camera icon. double click the home bgutton again to close them.
-
I just installed Photo Elements 12 and when I import my photos all I get on the grid is hourglasses, no images. When I click on them I do get the photo but I can't see them on the grid.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
All the subnets are not reachable over the VPN
Hi all,
We have a EZVPN connection to one of our branch office. Connectivity diagram is attached with this discussion.
HO LAN (10.1.0.0/16 & 192.6.14.0/24) --------- ASA5520-------- Internet ---------- Cisco2911-------- LAN of remote location (10.2.0.0/16)
we are using 10.2.0.0/26 subnet at remote office and 10.1.0.0/16 & 192.6.14.0/24 subnets at HO. From HO through 10.1.0.0/16 & 192.6.14.0/24 all the devices are reachable except the firewall which is connected with GigabitEthernet0/2 interface of cisco2911 router(on which VPN is created).
Its a fortigate firewall and it is reachable locally from the network 10.2.0.0/16. I believe its an issue with phase2 ACLs but didn't able to resolve the issue.
I'm not able to take GUI / CLI interfaces of fortigate firewall even i'm not able to ping the IP of GigabitEthernet0/2 interface of cisco2911.
kindly advise on same.
Below is the configuration of ASA5520 of HO and cisco2911 router of branch office
ASA5520:-
access-list inside_access_in extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list inside_access_in extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list splittunnelacl_JNC_AUH extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list splittunnelacl_JNC_AUH extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list Outside_cryptomap_65534.191 extended permit ip object-group DM_INLINE_NETWORK_103 10.2.0.0 255.255.0.0
jashanmalasa/sec/act# sho run obj
jashanmalasa/sec/act# sho run object-group | b DM_INLINE_NETWORK_103
object-group network DM_INLINE_NETWORK_103
network-object 10.1.0.0 255.255.0.0
network-object 192.6.14.0 255.255.255.0
group-policy AUHNEW internal
group-policy AUHNEW attributes
dns-server value 192.6.14.189 192.6.14.182
vpn-access-hours none
vpn-idle-timeout none
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec
ip-comp disable
re-xauth disable
pfs enable
ipsec-udp disable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
default-domain value xxxxxx
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout none
ip-phone-bypass disable
leap-bypass disable
nem enable
tunnel-group AUHNEW type remote-access
tunnel-group AUHNEW general-attributes
authorization-server-group LOCAL
default-group-policy AUHNEW
tunnel-group AUHNEW ipsec-attributes
pre-shared-key *****
peer-id-validate nocheck
isakmp ikev1-user-authentication none
Cisco2911:-
Current configuration : 10258 bytes
! Last configuration change at 19:06:18 AST Thu May 8 2014 by admin
! NVRAM config last updated at 19:01:43 AST Thu May 8 2014 by admin
! NVRAM config last updated at 19:01:43 AST Thu May 8 2014 by admin
version 15.1
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname AUHOffice_RTR
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.151-4.M4.bin
boot-end-marker
card type e1 0 0
no aaa new-model
clock timezone AST 4 0
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip name-server 213.42.xxx.xxx
multilink bundle-name authenticated
isdn switch-type primary-net5
crypto pki token default removal timeout 0
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
fax protocol pass-through g711ulaw
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice class h323 1
h225 timeout tcp establish 3
voice translation-rule 1
rule 1 /^9\(.*\)/ /\1/
voice translation-rule 2
rule 1 /^0\(2.......\)$/ /00\1/
rule 2 /^0\(3.......\)$/ /00\1/
rule 3 /^0\(4.......\)$/ /00\1/
rule 4 /^0\(5........\)$/ /00\1/
rule 5 /^0\(6.......\)$/ /00\1/
rule 6 /^0\(7.......\)$/ /00\1/
rule 7 /^0\(9.......\)$/ /00\1/
rule 8 /^00\(.*\)/ /0\1/
rule 9 /^.......$/ /0&/
rule 10 // /000\1/
voice translation-rule 3
rule 1 /^3../ /026969&/
voice translation-profile FROM_PSTN
translate calling 2
translate called 1
voice translation-profile TO_PSTN
translate calling 3
license udi pid CISCO2911/K9 sn xxxxxxxxx
license accept end user agreement
license boot module c2900 technology-package securityk9
hw-module pvdm 0/0
hw-module sm 1
username admin privilege 15 secret 4 Ckg/sS5mzi4xFYrh1ggXo92THcL6Z0c6ng70wM9oOxg
redundancy
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-10,16
crypto ipsec client ezvpn jashanvpn
connect auto
group AUHNEW key jashvpn786
mode network-extension
peer 83.111.xxx.xxx
acl 150
nat allow
nat acl 110
xauth userid mode interactive
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 10.2.0.1 255.255.255.248
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1430
ip policy route-map temp
duplex auto
speed auto
crypto ipsec client ezvpn jashanvpn inside
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.2.0.1
interface GigabitEthernet0/1
description *** Connected to 40MB Internet ***
no ip address
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface GigabitEthernet0/2
ip address 10.2.0.11 255.255.255.248
duplex auto
speed auto
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module ip address 10.2.0.3 255.255.255.248
!Application: CUE Running on SM
service-module ip default-gateway 10.2.0.1
interface SM1/1
description Internal switch interface connected to Service Module
no ip address
interface Vlan1
no ip address
interface Dialer0
description *** JASHANMAL 40MB Internet ***
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxx
ppp chap password 7 0252150B0C0D5B2748
ppp pap sent-username xxxxxx password 7 15461A5C03217F222C
crypto ipsec client ezvpn jashanvpn
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source route-map nonat interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.2.0.0 255.255.248.0 10.2.0.2
ip route 10.2.0.3 255.255.255.255 SM1/0
ip route 10.2.6.1 255.255.255.255 10.2.0.2
ip route 10.2.7.1 255.255.255.255 10.2.0.2
ip route 172.16.5.0 255.255.255.0 10.2.0.2
access-list 100 deny ip 10.2.4.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 100 deny ip 10.2.4.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 100 deny ip 10.2.4.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 100 deny ip 10.2.4.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 100 deny ip 172.16.5.0 0.0.0.255 10.1.6.0 0.0.0.255
access-list 100 permit ip 10.2.4.0 0.0.0.255 any
access-list 100 permit ip 172.16.5.0 0.0.0.255 any
access-list 110 deny ip 10.2.0.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.2.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.3.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.1.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.5.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.5.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.3.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.2.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.1.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.9.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 10.2.4.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 110 deny ip 10.2.6.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny ip 10.2.6.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.2.6.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.9.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny ip 172.16.5.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 110 permit ip host 10.2.6.1 any
access-list 110 permit ip host 10.2.6.2 any
access-list 110 permit ip host 10.2.6.3 any
access-list 110 permit ip host 10.2.6.4 any
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 86.96.201.72 eq 10008
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 86.96.254.136 eq 10008
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 216.52.207.67 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.151.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.148.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.149.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.150.22 eq www
access-list 110 permit tcp 172.16.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.4.0 0.0.0.255 any
access-list 150 permit ip 10.2.0.0 0.0.0.255 any
access-list 150 permit ip 10.2.1.0 0.0.0.255 any
access-list 150 permit ip 10.2.2.0 0.0.0.255 any
access-list 150 permit ip 10.2.3.0 0.0.0.255 any
access-list 150 permit ip 10.2.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.6.0 0.0.0.255 any
access-list 150 permit ip 172.16.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.7.0 0.0.0.255 any
route-map temp permit 100
match ip address 100
set ip next-hop 10.2.0.9
route-map temp permit 110
route-map nonat permit 10
match ip address 110
snmp-server community xxxxxxxx
snmp-server location JNC AbuDhabi Office
snmp-server contact xxxxxxxx
snmp-server enable traps tty
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server host xxxxx version 2c jash
control-plane
voice-port 0/0/0:15
translation-profile incoming FROM_PSTN
bearer-cap Speech
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
dial-peer cor custom
name CCM
name 0
name 00
dial-peer cor list CCM
member CCM
member 0
member 00
dial-peer cor list 0
member 0
dial-peer cor list 00
member 0
member 00
dial-peer voice 100 voip
corlist incoming CCM
preference 1
destination-pattern [1-8]..
session target ipv4:10.1.2.12
incoming called-number [1-8]..
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 101 voip
corlist incoming CCM
huntstop
preference 2
destination-pattern [1-8]..
session target ipv4:10.1.2.11
incoming called-number [1-8]..
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 201 pots
corlist outgoing 0
translation-profile outgoing TO_PSTN
destination-pattern 0[1-9]T
incoming called-number .
direct-inward-dial
port 0/0/0:15
dial-peer voice 202 pots
corlist outgoing 0
translation-profile outgoing TO_PSTN
destination-pattern 00[1-9]T
incoming called-number .
direct-inward-dial
port 0/0/0:15
prefix 0
dial-peer voice 203 pots
corlist outgoing 00
translation-profile outgoing TO_PSTN
destination-pattern 000T
incoming called-number .
direct-inward-dial
port 0/0/0:15
prefix 00
gateway
timer receive-rtp 1200
gatekeeper
shutdown
call-manager-fallback
secondary-dialtone 0
max-conferences 8 gain -6
transfer-system full-consult
timeouts interdigit 4
ip source-address 10.2.0.1 port 2000
max-ephones 58
max-dn 100
system message primary Your Current Options SRST Mode
transfer-pattern .T
alias 1 300 to 279
call-forward pattern .T
time-zone 35
date-format dd-mm-yy
cor incoming 0 1 100 - 899
line con 0
password 7 030359065206234104
login local
line aux 0
password 7 030359065206234104
login local
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password 7 110E1B08431B09014E
login local
transport input all
line vty 5 15
password 7 030359065206234104
login local
transport input all
scheduler allocate 20000 1000
ntp master 1
endAttached is the result from packet tracer of ASA5520-ASDM
Maybe you are looking for
-
Problems with using sample code for WebService client
Hi <br /><br />Ive downloaded the sample code from the Adobe <br />website but when i run the client i get an error which i dont understand:<br /><br />client side:<br />ERROR: java.lang.NullPointerException<br />AxisFault<br /> faultCode: {http://sc
-
How do I get macbook air to boot up off of the network
how do i get macbook air to boot up off of the network
-
Can I change a Anamorphic project to 4X3?
Is it possible to change a Anamorphic 16 X 9 project to 4 X 3 in Motion, without rebuilding it?
-
Media Encoder Mbits/s Limit Question...
In PP2.0 the Limit with the bitrate on .wmv is only 10Mbits/s. Yet most 1080i & 1080p avchd cams are around 17-18Mbit/s. I reckon 20Mbits/s should be available in Media encoder. I haven't used CS4 yet, what is it's limit? If its still 10Mbits/s, woul
-
AppletSupport on PC-NT lack ?
Trying to compile the partition fails as the compielr tries to include '.h' files from $FORTE_ROOT/userapp/appletsu/cl0/inc/apltsupt.h which is not on my nt node. is there a way to fix ? thanks j-p