Import Fails then Hangs

I am perplexed.
I have a 1 hour video uploaded and captured into Adobe Premiere Pro.
I  did this several times on two three computers.
The video files are exact same length with different names video_001, video_002, and so forth.
Why so?
I can play the video in VLC and WMP on several computers.
However when I attempt to import the videos with the exact same length on any computer using Premiere Pro 2 and/or Premiere Pro 3 the video import hangs almost at the end of the generating peak file message. The import is unable to finish. 99% done, and hangs.
Task manager shows Premire Pro 'not responding'. This happens in every instance on several computers.
I resorted to using Nero video capture. That didn't work. The movie video did not import.
I recorded the film on several different computer all with Adobe Premiere Pro.
Though I ended up with several films all the same size - all avi - I cannot get any one of those films to finish the import into Premiere Pro.
Work stopped in progress - need help.
Thanks
and hangs....

Your terms are a bit confusing - A glossary of video terms http://www.manifest-tech.com/links/video_terms.htm
I **think** you are saying that you are capturing from a DV tape camera... which does create AVI files... is this the case?
If not, what is the source of your AVI files, and what are the file details?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

Similar Messages

  • I click on mail and it says it must import my messages. Then I click continue and it says import failed

    I have a Macbook Pro Laptop. I click on mail and it says it must import my messages. Then I click continue and it says import failed. 

    Lion ate ALL my Mail: Apple Support Communities

  • HT201342 i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my  import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and fai

    i have a 10.6.8 mac os x system in a intel processor computer. how can I addressbook contacts to icloud. I tried exporting my  import my addressbook and failed, then exportind a vcard from all contacts and failed and finale only one vcadr and failed. Something might i doing wrong

    I just had the same problem, I've updated to 10.6.8 yesterday, and since then the browsing are very slow, no matter what broswer I am using, the upload download speed are still the same. But browsing just take forever, It takes for example google.com 30 seconds to load. I have Extream high speed internet connection, 3 other computers, and the only one is having this problem is the Mac after the update.
    Something in this update screwed my browsing capabitilties, I tried downloading Crome browser, same issue.
    I hope there is a way beside TimeMachine to revert the latest update. I don't want to reformat as I am sure as soon as I am going to do the update it will cause the same problem.
    Model Name:    iMac
      Model Identifier:    iMac11,3
      Processor Name:    Intel Core i7
      Processor Speed:    2.93 GHz
      Number Of Processors:    1
      Total Number Of Cores:    4
      L2 Cache (per core):    256 KB
      L3 Cache:    8 MB
      Memory:    12 GB
      Processor Interconnect Speed:    4.8 GT/s
      Boot ROM Version:    IM112.0057.B00

  • Import Preparing to import... hangs

    I am using iPhoto 9.4.2 under Mountain Lion 10.8.2.  I am unable to import photos into my iPhoto library anymore.  This happens both with photos already on my disk and photos from web pages.
    After I start to import, iPhoto hangs with "Import Preparing to import..." in the top of the iPhoto window.
    I have used all 4 steps in Photo Library First Aid (including Rebuild Database) without resolving the problem.
    I tried using iPhoto Library Manager to rebuild the library, but this app launches iPhoto and starts an Import which hangs (I left it alone for several hours without any progress shown for importing events).
    My iPhoto Library is 11GB in size.  I have 22.5GB free on my boot drive.  My iMac has 8GB of RAM.

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists.  If it does log into another user account and try iPhoto there.  If that also fails then it's a problem with the application and it should be reninstalled. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
    HD/Library/Receipts folder (10.5 and earlier)
    or from the /var/db/receipts/  folder (10.6) .
    or from the /private/var/db/receipts folder (10.7 or later)
    Then install iPhoto from the source it came from originally.
    OT

  • "Import Failed" when trying to run a import (Integration) script from FDM

    Backgroud about the Issue : My source system for data is Oracle Orion and the Destination is HFM.Trying to import data fom orion to HFM through FDM via ODBC connectivity.
    Modified the "Integration Script Example" in fdm_admin guide and with this i am able to import data from the Orion to the FDM staging table "tDataSegX" however i am not abel to see any data in the FDM (Import Module) and thats when i get this error "Import Failed".
    Posisble casue according to my knowledge : My Import script only includes code to 1.Connect to ODBC data source 2. copies all the values from the Source table to the staging table.
    I am not sure if i am missing some attributes in the script ??!!
    can some one help me in checking if my imoport scritp is correct ??!!!
    Here is my script
    Function Import_int(strLoc, lngCatKey, dblPerKey, strWorkTableName)
    Dim objSS 'ADODB.Connection
    Dim strOra 'Ora string
    Dim rs ' As New ADODB.Recordset
    Dim rsAppend 'tTB table append rs object
    Set cnSS = CreateObject("ADODB.Connection")
    Set rs = CreateObject("ADODB.Recordset")
    Set rsAppend = DW.DataAccess.farsTableAppend("TDATASEG7")
    Dim strconn
    strconn="Provider=msdaora;Data Source=<<Data Source Name>>;User Id=<<Username>>;Password=<<Password>>;"
    cnSS.open strConn
    strOra = "Select * "
    strOra = strOra & "FROM <<Oracle View>>"
    'Get data
    rs.Open strOra, cnSS
    If rs.bof And rs.eof Then
    RES.PlngActionType = 2
    RES.PstrActionValue = "No Records to load!"
    Exit Function
    End If
    'Loop through records and append to tTB table in location's DB
    If Not rs.bof And Not rs.eof Then
    Do While Not rs.eof
    rsAppend.AddNew
    rsAppend.Fields("PartitionKey") = RES.PlngLocKey
    rsAppend.Fields("CatKey") = RES.PlngCatKey
    rsAppend.Fields("PeriodKey") = RES.PdtePerKey
    rsAppend.Fields("DataView") = "YTD"
    rsAppend.Fields("CalcAcctType") = 9
    'write conditions to eliminate null
    rsAppend.Fields("Amount") = rs.fields("YTD").Value
    rsAppend.Fields("Desc1") = test 'rs.fields("txtAcctDes").Value
    rsAppend.Fields("Account") = rs.fields("MAIN_AC_CODE").Value
    rsAppend.Fields("Entity") = rs.fields("COMPANY_CODE").Value
    rs.movenext
    Loop
    End If
    'Records loaded
    RES.PlngActionType = 6
    RES.PstrActionValue = "ODBC Import successful!"
    'Assign Return value
    SQLIntegration = True
    rs.close
    End Function

    HI,
    I first changed the table name to "strWorkTableName" and tried executing only the script from the Workbench client and got error as bellow
    Financial Data Management Workbench
    -2147467259 - Data access error.
    At Line: 20
    OK
    For some reason i am not ok with running the code in the workbench client (even for checking the syntax) because for the reason that i am not sure if all the parameter required by the funciton will be passed by donig just "Run script."So even with this error in the Work bench client i proceded to the Workflow module in the web interface and run the import and here is what i have now.
    Error: An error occurred importing the file.
    Detail: Invalid procedure call or argument
    here is the error message from the "View Erro Log"
    ERROR:
    Code............................................. 5
    Description...................................... Invalid procedure call or argument
    Procedure........................................ clsImpProcessMgr.fExecuteImpScript
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 15676
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... <<ComputerName>>
    App Name......................................... <<ApplicationName>>
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPTDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... ORION
    Location ID...................................... 750
    Location Seg..................................... 4
    Category......................................... WLCAT
    Category ID...................................... 12
    Period........................................... Feb - 2011
    Period ID........................................ 2/28/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-21 14:43:42] **
    ERROR:
    Code............................................. 5
    Description...................................... Invalid procedure call or argument
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 15676
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... <<ComputerName>>
    App Name......................................... <<ApplicationName>>
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPTDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... ORION
    Location ID...................................... 750
    Location Seg..................................... 4
    Category......................................... WLCAT
    Category ID...................................... 12
    Period........................................... Feb - 2011
    Period ID........................................ 2/28/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
    ERROR:
    Code............................................. 70
    Description...................................... Permission denied
    Procedure........................................ clsArchiveMgr.fArchiveSupercededDelete
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 7180
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... <<ComputerName>>
    App Name......................................... <<ApplicationName>>
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPTDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... SAMPLE
    Location ID...................................... 748
    Location Seg..................................... 2
    Category......................................... WLCAT
    Category ID...................................... 12
    Period........................................... Feb - 2011
    Period ID........................................ 2/28/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
    ERROR:
    Code............................................. 70
    Description...................................... Permission denied
    Procedure........................................ clsArchiveMgr.fArchiveSupercededFlag
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 7180
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... <<ComputerName>>
    App Name......................................... <<ApplicationName>>
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPTDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... SAMPLE
    Location ID...................................... 748
    Location Seg..................................... 2
    Category......................................... WLCAT
    Category ID...................................... 12
    Period........................................... Feb - 2011
    Period ID........................................ 2/28/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
    ERROR:
    Code............................................. 70
    Description...................................... Permission denied
    Procedure........................................ clsImpProcessMgr.fClearData
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 7180
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... <<ComputerName>>
    App Name......................................... <<ApplicationName>>
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPTDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... SAMPLE
    Location ID...................................... 748
    Location Seg..................................... 2
    Category......................................... WLCAT
    Category ID...................................... 12
    Period........................................... Feb - 2011
    Period ID........................................ 2/28/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False
    ** Begin FDM Runtime Error Log Entry [2011-03-21 14:44:05] **
    ERROR:
    Code............................................. 70
    Description...................................... Permission denied
    Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
    Component........................................ upsWObjectsDM
    Version.......................................... 1112
    Thread........................................... 7180
    IDENTIFICATION:
    User............................................. admin
    Computer Name.................................... <<ComputerName>>
    App Name......................................... <<ApplicationName>>
    Client App....................................... WebClient
    CONNECTION:
    Provider......................................... ORAOLEDB.ORACLE
    Data Server......................................
    Database Name.................................... HYPTDB
    Trusted Connect.................................. False
    Connect Status.. Connection Open
    GLOBALS:
    Location......................................... SAMPLE
    Location ID...................................... 748
    Location Seg..................................... 2
    Category......................................... WLCAT
    Category ID...................................... 12
    Period........................................... Feb - 2011
    Period ID........................................ 2/28/2011
    POV Local........................................ False
    Language......................................... 1033
    User Level....................................... 1
    All Partitions................................... True
    Is Auditor....................................... False

  • IDoc import failed (RemoteUploadException - no_transaction)

    Hi all!
    I'm trying to import an idoc to the XI integration repository, but the import fails with the following message:
    **Ready for import**
    Import started...
    ZXIJ3AMAT./AFS/MATMAS04.ZXIMAT:
    com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: Commit of the transaction not possible because the status is: no_transaction
    Import failed with 1 error
    Please note the following:
    - iDoc import (of ALL iDocs) was always OK, up to now...
    - from now on, iDoc import is NOT successul for all sort of iDocs
    - in SWCV, no recent changes in "Connection Data for Import from SAP System"
    After this message,
    trying to open the iDoc interface definition => then browsing into, a message/popup appears like that:
    Schema for type ZXIMAT.E1MARCM (category Data Type) not found
    (furthermore, red-highlighted the corresponding row)
    Please help...
    Thanks all in advance!
    Gianluca

    Hallo Gabriel,
    problem is solved.
    It was caused by an Oracle tablespace to be extended:
    > com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: ORA-01691:
    > unable to extend lob segment SAPXIDDB.SYS_LOB0000039485C00004$$ by 128
    > in tablespace PSAPXIDDB
    I could notice this in following days, trying to import again...
    thanks & best regards,
    Gianluca

  • Portal Import Fails

    Import fails and from the log.
    Setting site_import_map(0) to 0
    Setting site_import_map(1) to 1
    Setting site_import_map(2) to 2
    Setting site_import_map(4) to 4
    Setting site_import_map(5) to 5
    Setting site_import_map(6) to 6
    Setting site_import_map(8) to 8
    Setting portlet_import_map()(39630) to 39736
    *** Exception during Pronto import: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    Completed On: 23-SEP-02 16:42:19
    ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    Any thoughts ?

    You are hitting bug 2216935 for pronto import. Specifically, one of the provider's information is not being handled internally which causes the pronto section of import to fail. This will be addressed in the next release. If there aren't too many pronto features, you can turn of this functionality at the page group level and re-export and re-import the page group. On the target you can then rewire the pronto features. Also, since the page group gets imported in this case - you can edit the pronto functionality on the imported page group and identify/fix the corrupted one manually.

  • Data Services 12.2.3.0 BODI-1112015 Adapter metadata import failed

    Hi Experts,
    I am using Data Services 12.2.3.0.
    I have an issue in importing functions through 'Adapter' type datastore into Data Services. I can open the datastore and see the list of functions available, but when I try to import them, I get the error BODI-1112015 Adapter metadata import failed.
    The setup and the errors are as below.
    The adapter datastore is setup as below.
    I built a new keystore called clientkeystore.jks in the ..\bin.Then created the .CSR file, and then imported the signed chained (I believe it's chained certificate) certificate of the server hosting the wsdl into the keystore.
    Thanks for the post http://scn.sap.com/thread/1589052 . After changing the metadata character set to utf-8, I can see a list of functions when I open this New_Datastore in Data Services. It proves that the setup for the datastore has no problem parsing the wsdl file and give me the list of functions in it. 
    However, the error appears when I try to import them.
    Error is:
    Adapter metadata import failed. Error message: (BODI-1112015) Error parsing the <TheFunctionToBeImported> included in the XML sent by the adapter to represet a function <Error importing XML Schema from file <adapter_schema_in.xsd>:<XML parser failed: Error <Schema Representation Constraint: Namespace 'http://result.form.v81.api.keysurvey.com' is referenced without <import> declaration> at line <13>, char <46> in < < xsd:schema xmln:xsd=http://www.w3.org/2001/XMLSchema" xmln:tns="http://result.form.v81.api.keystore.com" xmlns:diws="http://businessobjects.com/diwebservice" targetnamespace="http://www.businessobjects.com/diwebservice"><xsd:import namespace='http://v81.api.keysurvey.com' schemaLocation='C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice\FormResultManagemenetgetRespondentsgetRespondents0.xsd'/>
    <xsd: import namespace='http://result.form.v81.api.keysurvey.com' schemaLocation='C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice\FormResultManagemenetgetRespondentsgetRespondents2.xsd'/> ........
    When comparing it with the wsdl file(as below), it is worth nothing that the schemaLocation is changed to a local directory under C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice  while it was not the case in wsdl. The schemaLocation is on the server.
    I am wondering if the redirection from the server specified in the wsdl file to the local directory has caused this error. The error 'namespace is reference without <import>' is apparently wrong as the <import> is just there.
    Or there is any other reason behind this.
    I appreciate any adivce or question from you!

    I have reached the exact same error as this post http://scn.sap.com/thread/3190403
    The error is
    [Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_builder.c(876) Specifyingservices and modules directories using axis2.xml but path of the library directory is not present
    [Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_builder.c(261) Processing transport senders failed, unable to continue
    [Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\dep_engine.c(939) Populating Axis2 Configuration failed
    [Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_init.c(195) Loading deployment engine failed for client repository C:\Program Files (x86)\SAP BusinessObjects\Data Services\ext\webservice-c\axis2.xml
    As it is identified as an version problem, this issue is not going to be investigated any further.
    As an alternative, can try to use Oracle 11g SOAP_API.sql.

  • Auto Import CD then Eject unreliable (works half the time)

    I'm trying to re-rip my large collection of CDs, so I set my iTunes General Preferences to:
    When you insert a CD: [Import CD and Eject]
    Unfortunately, it doesn't work half the time. When it does work, it works as you might expect. I insert the CD, it spins up, iTunes mentions that it is looking up the track info online, and then it starts importing. When it's done it ejects. Perfect.
    However, sometimes I insert the CD and things go differently. It spins up, iTunes acts like it's doing something, but then it stops as if no CD were present. There's no CD listed on my desktop nor on the left panel of iTunes. My only option here is to use the top menu bar Eject -> Eject Superdrive tool, then reinsert. The second insertion of the CD makes it work as listed in the previous paragraph.
    At first it seemed to fail every few CDs, but now I have to do the in-out-in thing on every CD. Because this requires MORE attention on my part than doing it the normal, manual way, I have resorted to the old manual way. Insert CD, iTunes shows the CD, and then I say Import. Then I manually eject.
    Anyone know why the auto feature isn't working reliably?
    Thanks!
    Michael

    Actually the problem seems unrelated to whether I have auto-import turned on or not. The problem appears to be general, and related to CD identification.
    I notice when it fails that iTunes has begun doing the CDDB (or whatever it's called now) lookup, but that only flashes briefly and then it goes away as if there were no CD in the drive. I eject, immediately reinsert, and it works the next time.
    Now that I'm nearly done re-ripping my collection (450 CDs), I'd estimate that it fails to see/recognize/mount 1 out of every 5 CDs on the first try.

  • Keyword import fails on non-ascii character

      I recently tried to import a long set of keywords (about 4000 terms).  i set up the file in excel and then tried to import the records.  I kept getting this message:  
    only text files encoded with ascii or unicode UTF-8 are supported when importing keywords.
    I finally tracked down the problem when i converted the file to a MS word text file, broke it down into parts and eventually found the problem record.  for some reason, the apostrophe in the words "don't know" had been corrupted to a weird character.  after i corrected this, everything worked. 
    however, this took a long time.   It would have been helpful if  lightroom could have at least pinpointed the line where the import failed or offered to convert non-compliant charaters to some specific character or set of characters.

    Yeah, that didn't work so well since SuperDuper ran across repeated errors trying to do so; I suspect it's something to do with the drive. (SuperDuper complains about WD's MyBook, which is what the drive is.) Because SD stops the entire copy operation on single errors, it'd be a painstaking process.
    Besides that, I like doing fresh installs of all the bits.

  • Import fail while trying to import userdefinedfields.xml

    All,
    I am trying to import userdefinedfield.xml from dev to QA environment and import fails with below error message.
    [xx/07/13 11:36:44:892 EST] 00000051 SystemOut     O ERROR,15 Jul 2013 11:36:44,892,[XELLERATE.DATABASE],ALTER TABLE USR MODIFY
    java.sql.SQLException: ORA-00904: : invalid identifier
    [15/07/13 11:36:44:907 EST] 00000051 SystemOut     O DEBUG,15 Jul 2013 11:36:44,907,[XELLERATE.SERVER],Class/Method: tcDataBase/substitute entered.
    [xx/07/13 11:36:44:907 EST] 00000051 SystemOut     O DEBUG,15 Jul 2013 11:36:44,907,[XELLERATE.SERVER],Class/Method: tcDataObj:handleErr - Data: poError.isAction - Value: F
    [xx/07/13 11:36:44:907 EST] 00000051 SystemOut     O DEBUG,15 Jul 2013 11:36:44,907,[XELLERATE.SERVER],Class/Method: tcDataObj:handleErr - Data: poError.isCode - Value: SDK.MODCOL
    [xx/07/13 11:36:44:907 EST] 00000051 SystemOut     O DEBUG,15 Jul 2013 11:36:44,907,[XELLERATE.SERVER],Class/Method: tcDataObj:handleErr - Data: poError.isDescription - Value: Error Modifying a Column.
    [xx/07/13 11:36:44:907 EST] 00000051 SystemOut     O DEBUG,15 Jul 2013 11:36:44,907,[XELLERATE.SERVER],Class/Method: tcDataObj:handleErr - Data: poError.isRemedy - Value: Check for valid column length modification
    [xx/07/13 11:36:44:907 EST] 00000051 SystemOut     O DEBUG,15 Jul 2013 11:36:44,907,[XELLERATE.SERVER],Class/Method: tcDataObj:handleErr - Data: poError.isDetail - Value: com.thortech.xl.orb.dataaccess.tcDataAccessException: DB_WRITE_FAILEDDetail: SQL: ALTER TABLE USR MODIFY Description: ORA-00904: : invalid identifier
    SQL State: 42000Vendor Code: 904Additional Debug Info:com.thortech.xl.orb.dataaccess.tcDataAccessException
    [xx/07/13 11:36:44:923 EST] 00000051 SystemOut     O ERROR,15 Jul 2013 11:36:44,923,[XELLERATE.DDM.IMPORT],Error Modifying a Column.
    [xx/07/13 11:36:44:923 EST] 00000051 SystemOut     O ERROR,15 Jul 2013 11:36:44,923,[XELLERATE.DDM.IMPORT],Exception during import
    com.thortech.xl.ddm.exception.DDMException: Unable to save dataobject for SDC
      at com.thortech.xl.ddm.instance.TableInstance.finishDataObject(Unknown Source)
    We are not able to replicate the issue in any other dev/test environments.
    Please suggest if you have idea on what can be issue.
    Thanks,
    Subbu

    can you disable the caching of metadata, restart OIM server and then try importing the xml.

  • Upgrade cucm 4.1(3) to 7.1(2) using dma - import failed

    Hi every body,
    I have cucm 4.1(3) and I want to upgrade to 7.1(2).
    I used DMA to export the cucm database and the DMA result is : Validation = Success with Warnings
    DMA has generate the lic file : "licupgrade.lic"
    I created the answer file to install cucm automatically with a new hostname, administrator login and password : "platformConfig"
    During the cucm installation, the software has detected the usb drive that contains all files but the dma import failed.
    I have the following error message : "file retrieval failed for unknown reason"
    I have seen that I can :
    * trie to change the file name of the .tar file
    * trie to use FTP with 3CDEAMON
    * use SFTP or FTP
    But it never works, it still have the issue.
    Does someone have an idea ?
    Thank you

    Hi Alain. I did this same deployment on last October.
    First the DMA Sucess with warnings have nothing to do with the unretrieval of the file. When i had this message it meant that the users, translation patterns and some route patterns could not be exported in my case. What i did was to BAT the translation patterns and users on the 4.1 and then Bulk Them on the 7 version. The router patterns had to be added manually btw.
    Now back to your real issue, also happened to me. I normally use the Windows Xp FTP installed from the Control-Panel-Add Programs- Add remove windows componnents- . Its actually very simple, the trick is to add the slash to the directory field.
    And all you need to add is the information like this.
    Directory: \
    Username: anonymous
    password: anonymous:[email protected]   (x.x.x.x = your ip)
    You can also use JScape Secure FTP Server, which is the one i normally use to do the backups over the SFTP feature.
    Try the windows FTP and tell me how it went.

  • Adapter metadata import failed

    I get 'Adapter metadata import failed' error while trying to import a put operation in the Business Objects Data Services designer in the JMSADAPTER type datastore. The xsd file is in place but the error message says that 'File <ADAPTER_MESSAGE_SCHEMA.XSD> is not a valid XML schema. The XSD that  I specified in the operation is of a different name, and am not able to figure out where an XSD for this name comes in.
    The same job in the same repository happens to work with no errors on a different Job server.The error it gives is 'File <ADAPTER_MESSAGE_SCHEMA.xsd> is not a valid XML Schema specification.'
    Edited by: ssharma6 on Apr 9, 2010 11:28 AM

    I have DI 11.7.3.2 and the error is almost the same, BODI-1112010 : metadata import failed, the service is define as:
    http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort
    and the wsdl file is:
    http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort/wsdl/v1/alert/services/wowlink/woolworths/com/au/AlertService.wsdl
    this service is not using http basic authentication, the security is inside every object.
    Looks that DI probably is transparently following the HTTP redirect from
         http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort?wsdl
    to:
         http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort/wsdl/v1/alert/services/wowlink/woolworths/com/au/AlertService.wsdl
    Then when it attempts to resolve v1.alert.services.wowlink.woolworths.com.au.wsdl , it issues a request for:
         http://clwlkd2:19080/.wowlink-services-router-http/services/ v1.alert.services.wowlink.woolworths.com.au.wsdl
    instead issuing a request for:
         http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort/wsdl/v1/alert/services/wowlink/woolworths/com/au/v1.alert.services.wowlink.woolworths.com.au.wsdl
    which is where the resource actually is.
    Did someone see this redirection issue before?

  • ODI-14070: Import failed

    Hi All ,
    I have one ODI procedure(xml file) which belongs to our deployment script. For the very first time,this procedure was made in ODI and since then it has been exported and kept in our deployment scripts .This procedure is used by a number of people who import this procedure to their own project and use it .For the very first time this procedure gets successfully imported by setting the IMPORT TYPE to Duplication Mode . The reason being that every object ,in my case,every procedure in ODI has an ID of the project associated with it .In my case the object to be imported has a parent id of 82799(the original project id) associated with it .The moment I try importing this in duplicate mode , ODI implicitly reassigns the parent id with the ID of the project within which I am importing my procedure and things work fine .
    The challenge arises when I try to import the procedure in Insert mode and get the below error.
    "com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-14070: Import failed. The parent object was not found in the repository"When I searched my deployment scripts ,I found that my procedure (please refer the below line ) has an id associated with it .This is the ID which is referred to as the parent object in the error ODI-14070.
    <Field name="ITrt" type="com.sunopsis.sql.DbInt"><![CDATA[82799]]></Field>This error is very troublesome and is a hindrance in migrating an enhanced version of the procedure into my existing projects .Is there any way out through which we can escape this error during insert mode /insert-update mode ?
    Thanks as always ,
    Rahul

    Hi Tina and Sandeep,
    I found the following error in the log file:
    Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:305) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:246) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:247) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:262) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54) at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:214) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:246) at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsBeforeAppDeployments(ClassDeploymentManager.java:149) at weblogic.management.deploy.classdeployment.ClassDeploymentService.start(ClassDeploymentService.java:21) at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    I have edited the commEnv.cmd file by adding $MW_HOME\modules\oracle.jrf_11.1.1\jrf.jar to WEBLOGIC_CLASSPATH but still got the same error.
    Question: Is WEBLOGIC_CLASSPATH in commEnv.cmd file the right place to setup?
    Thanks,
    Jeffrey

  • SC import fails with "import successfully" in log. How to perform import?

    Hello SDN!
    I can't import SC SAP-SHRWEB.sca from Development to Consolidation system. At firts import process was finished with 'import failed' state and with followed log:
    20080416094446 Info   :Starting Step Repository-import at 2008-04-16 09:44:46.0570 +6:00
    20080416094446 Info   :Component:sap.com/SAP-SHRWEB
    20080416094446 Info   :Version  :MAIN_CRM50VAL_C.20060914085157
    20080416094446 Info   :1. propagation request is of type TCSSoftwareComponent
    20080416094457 Info   :Propagatable:0af61b4e430511db8c9d0030057116fe exists allready in the repository. No import necessary.
    20080416193724 Fatal  :VcmFailure received
    20080416193724 Fatal  :caused by Exception:com.tssap.dtr.client.lib.deltavlib.VcmFailure: Not Ready [(pre||post)-condition failed: Not Ready]:Not Ready [(pre||post)-condition failed: Not Ready]
    com.tssap.dtr.client.lib.deltavlib.VcmFailure: Not Ready [(pre||post)-condition failed: Not Ready]
         at com.tssap.dtr.client.lib.deltavlib.impl.AbstractCommand.checkedExecute(AbstractCommand.java:196)
         at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:160)
         at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:148)
         at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:544)
         at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
         at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
         at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
         at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
         at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
         at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:447)
         at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:176)
         at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
         at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:113)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:648)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:620)
         at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImport(LocalCmsTransportProxyLocalObjectImpl0_0.java:1742)
         at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1432)
         at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2815)
         at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:978)
         at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2866)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    20080416193725 Fatal  :caused by Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Not Ready [(pre||post)-condition failed: Not Ready]:communication error: VcmFailure received: Not Ready [(pre||post)-condition failed: Not Ready]
    com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Not Ready [(pre||post)-condition failed: Not Ready]
         at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:563)
         at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
         at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
         at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
         at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
         at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
         at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:447)
         at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:176)
         at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
         at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:113)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:648)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:620)
         at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImport(LocalCmsTransportProxyLocalObjectImpl0_0.java:1742)
         at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1432)
         at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2815)
         at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:978)
         at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2866)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    20080416193725 Info   :Step Repository-import ended with result 'fatal error' ,stopping execution at 2008-04-16 19:37:25.0338 +6:00
    I applied note 989010 and reimport SC. File processed about 5 hours and after that it still have 'import failed' state but in the log there is a message:
    20080417124350 Info   :Starting Step Repository-import at 2008-04-17 12:43:50.0291 +6:00
    20080417124350 Info   :Component:sap.com/SAP-SHRWEB
    20080417124350 Info   :Version  :MAIN_CRM50VAL_C.20060914085157
    20080417124350 Info   :1. propagation request is of type TCSSoftwareComponent
    20080417124351 Info   :propagatable:0af62b4e430511db8c9d0030057116fe not known in repository:http://UIT-EP-01:51000/dtr
    20080417124351 Info   :Import propagatable:0af62b4e430511db8c9d0030057116fe from archive:SAP-SHRWEB into repository:http://UIT-EP-01:51000/dtr
    20080417124351 Detail :start of importing propagatable:0af62b4e430511db8c9d0030057116fe to repository:http://UIT-EP-01:51000/dtr
    20080417124359 Info   :Propagatable:0af61b4e430511db8c9d0030057116fe imported successfully.
    Please help me to import this SC or provide me a detail way how to clean DTR, my track and other that may be necessary to clean from SC and reimport all SCs again.
    Regards, Lev

    Hi Lev,
    To your question to clear the track
    You can delete your track as described in the below link, and then recreate the track and reimport.
    Link: [Deleting Track|http://help.sap.com/saphelp_nw70/helpdata/EN/33/71fe94e1834af8b5bd3c0e1de5ab41/frameset.htm]
    Do not forget to delete DTR workspace.
    Do reward points if you find the link useful.
    Cheers,
    Sandeep

Maybe you are looking for