Import files fails on first attempt

Hi,
I have a plugin which pulls files from a certain folder for import.
The first time my plugin tries to import a file i get this error
But subsequent calls to the same document succeed and adobe acrobat imports it correctly. Do you know what might be going on, is it some sort of timing issue?

When you click "Insert Files" I override the Open Dialog if it is for this feature. I then create an ASPath array with my files and load the files before sending the result back in *outASPathName...
The timing error occurs in the following scenario
1. Click Insert Files
2. Select Files and click Insert
3. The default Insert Files dialog appears with my files loaded
4. If i click this within a few seconds it throws the above error
4a. If i want about 5 seconds and click it works

Similar Messages

Gnome login fails at first attempt

Hi guys,
I'm having a strange problem here.
When I boot my notebook and try to login into Gnome, it constantly fails at the first attempt.
So I click on my username, enter the (correct) password and nothing happens. I cancle it with 'esc', click on the username again, enter the password and I'm in.
This also occurs when I lock my screen.
Any ideas why Gnome tries to troll me and how to fix it?
Thanks.
Specs:
Macbook pro 5,5
GDM 3.10.0.1
GNOME Shell 3.10.4
Any more information needed? Let me know.

I did a checkup von /var/log/gdm/:0.log but didn't find anything that might give me an hint
Here is the output of the logfile
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux antartica 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 rw quiet
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 24 17:11:42 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(--) PCI:*(0:2:0:0) 10de:0863:106b:00b9 rev 177, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(++) using VT number 1
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(WW) Unresolved symbol: fbGetGCPrivateKey
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling 2D acceleration
(II) NVIDIA(0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(0): Vision stereo.
(II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
(II) NVIDIA(0): NVIDIA GPU GeForce 9400M (C79) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
(--) NVIDIA(0): Valid display device(s) on GeForce 9400M at PCI:2:0:0
(--) NVIDIA(0): Apple Color LCD (DFP-0) (boot, connected)
(--) NVIDIA(0): DFP-1
(--) NVIDIA(0): DFP-2
(--) NVIDIA(0): Apple Color LCD (DFP-0): Internal Single Link LVDS
(--) NVIDIA(0): Apple Color LCD (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-1: Internal Single Link TMDS
(--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-2: Internal DisplayPort
(--) NVIDIA(0): DFP-2: 480.0 MHz maximum pixel clock
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) NVIDIA(0): device Apple Color LCD (DFP-0) (Using EDID frequencies has
(**) NVIDIA(0): been enabled on all display devices.)
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0): "DFP-0:nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (112, 112); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
Loading extension NV-CONTROL
Loading extension XINERAMA
(II) NVIDIA(0): [DRI2] Setup complete
(II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
(--) RandR disabled
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.8.2
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event2"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
setversion 1.4 failed: Permission denied
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
(II) config/udev: Adding drm device (/dev/dri/card1)
(II) xfree86: Adding drm device (/dev/dri/card1)
removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Power Button
(II) evdev: Power Button: Close
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: removing device Sleep Button
(II) evdev: Sleep Button: Close
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event2"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: removing device Power Button
(II) evdev: Power Button: Close
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:10.0/0000:02:00.0/drm/card0 /dev/dri/card0
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
setversion 1.4 failed: Permission denied
(II) config/udev: Adding input device applesmc (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Apple Computer, Inc. IR Receiver (/dev/input/event8)
(**) Apple Computer, Inc. IR Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Apple Computer, Inc. IR Receiver'
(**) Apple Computer, Inc. IR Receiver: always reports core events
(**) evdev: Apple Computer, Inc. IR Receiver: Device: "/dev/input/event8"
(--) evdev: Apple Computer, Inc. IR Receiver: Vendor 0x5ac Product 0x8242
(--) evdev: Apple Computer, Inc. IR Receiver: Found keys
(II) evdev: Apple Computer, Inc. IR Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Computer, Inc. IR Receiver" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device applesmc (/dev/input/js0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Built-in iSight (/dev/input/event6)
(**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Built-in iSight'
(**) Built-in iSight: always reports core events
(**) evdev: Built-in iSight: Device: "/dev/input/event6"
(--) evdev: Built-in iSight: Vendor 0x5ac Product 0x8507
(--) evdev: Built-in iSight: Found keys
(II) evdev: Built-in iSight: Configuring as keyboard
(II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
(**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
(**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
(**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
(--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x237
(--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
(II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 11)
(II) config/udev: Adding input device bcm5974 (/dev/input/event9)
(**) bcm5974: Applying InputClass "evdev touchpad catchall"
(**) bcm5974: Applying InputClass "Multitouch Touchpad"
(**) bcm5974: Applying InputClass "touchpad catchall"
(**) bcm5974: Applying InputClass "Default clickpad buttons"
(**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.7.4
(II) Using input driver 'synaptics' for 'bcm5974'
(**) bcm5974: always reports core events
(II) synaptics: bcm5974: found clickpad property
(--) synaptics: bcm5974: x-axis range -4460 - 5166 (res 0)
(--) synaptics: bcm5974: y-axis range -75 - 6700 (res 0)
(--) synaptics: bcm5974: pressure range 0 - 256
(--) synaptics: bcm5974: finger width range 0 - 16
(--) synaptics: bcm5974: buttons: left double triple
(--) synaptics: bcm5974: Vendor 0x5ac Product 0x237
(--) synaptics: bcm5974: touchpad found
(**) bcm5974: always reports core events
(II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
(**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
(**) synaptics: bcm5974: (accel) AccelFactor is now 0.017
(**) bcm5974: (accel) keeping acceleration scheme 1
(**) bcm5974: (accel) acceleration profile 1
(**) bcm5974: (accel) acceleration factor: 2.000
(**) bcm5974: (accel) acceleration threshold: 4
(--) synaptics: bcm5974: touchpad found
(II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
(**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server

T440p, WIndows 7: Fingerprint Reader Fails on First Attempt to Log In, Works on Second After Delay

I have a T440p with Windows 7 Pro. Except on rare occasions, I am unable to log into Windows with my first swipe across the fingerprint reader. The green light is on when I do the first swipe and it immediately goes off and stays off for around 15 sesconds, during which time another swipe does nothing. Then the green light will return and a second finger swipe will log me on.
Any suggestions on fixing this would be appreciated. It's made using the fingerprint reader for login impractical, because it's faster to just go to the password screen and log in that way. Thanks.
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
Thinkpad X120e
Thinkpad T61p
Solved!
Go to Solution.

I do see a several second delay before the fingerprint reader green light comes on after the login screen appears, but it's no where near as long as the delay I was previously seeing between the first failed swipe and waiting for the light to come on again. The new driver is a great improvement and make the fingerprint reader work as I recall when I first purchased the T440p--though possibly a bit slower to light up after the login screen appears. It would be great to see the fingerprint reader light come on more quickly after the login screen appears, but that's a minor thing compared to the failure on the first swipe.
Thanks again for giving us the opportunity to try this driver out. So far, after a day of use and several times coming out of sleep, I haven't had any failed swipes.
Skoop wrote:
sog, some feedback on that driver:
The installer runs but doesn't give any prompt that it has finished. I was waiting for something to show, after the progress bars, but it just quits. Before I restarted, I checked the driver version and saw the new one, so I figured that was all that was going to happen. Driver is v.285, dated 1/29/15.
Restarted the PC and then put it to sleep (deep sleep mode/Intel Rapid Start). First swipe does indeed work to login thereafter.
But: It takes longer for the FP reader light to come on now. I think it's that same 15 seconds mentioned above. With the previous driver, the scanner light would come on almost right away with the login screen, but the first swipe wouldn't do anything. Once the light came on again--that period of seconds, the swipe would work.
With this new driver version, I think that what's changed is that the light simply doesn't come on until whatever is going on in the background has completed. So, in effect, getting a desktop takes the same amount of time, but with only a single swipe. --Which isn't a complaint that a login should be able to be effected more quickly with the FP scanner. Perhaps it can't. Just reporting how it works now.
journeyman, your take?
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
Thinkpad X120e
Thinkpad T61p

Adobe organizer hangs and does respond when importing files for the first time?Adobe organizer hangs and does respond when importing files for the first time?

Help!! This is crazy. Organizer stops at 17% and freezes. I can't import my iPhoto or picture files. Help please!

For reference: The computer as configured just like the other systems we have...from executing the file to lockup is about 17 seconds...then about 3 minutes of lockup time before it finishes loading.
With the Antivirus/firewall completely disabled,...from executing to lockup is about 10 seconds, then lockup is about 45 seconds. (But it still happens)
With Antivirus/firewall on and Escript.api removed from the plugins folder, No delay, 2 seconds to the file load (but then without the editable fields)

Web Service Call Fails on First Attempt

Hi,
I am calling a .Net web service from Flex and I am getting
unexpected results on the first call. The function accepts a few
parameters and returns an integer. I currently have it coded to
return 1, 2, or 3, but it always returns 0 on the first call. All
subsequent calls return expected results. Is this a Flex bug, or am
I missing something?
Thanks!

Hello.
Last month, I've made an reply to the topic just the same to
yours.
Please see:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=585&threadid=1257326#45 61856
I'm not sure this problem is a bug or not, but in my
situation, this problem has been happened since I updated Flex
Builder....

Frame creation fails at first attempt but creates succcessfully later on

hi
i am trying to create frames from a movie using c#.I have converted javascript code to c#.But every time i attemp to create frames with a new movie,it fails to create frames in photoshop cs5.But it easily generates frames for the movie that have been used once in photoshop.I am unable to get any clue why it is working like this.plaese give some advice.

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ORA-48913: Writing into trace file failed

Hi
my OS: OUL5x64
DB: 11.1.0.7
receive this error in alert.log but could not figure out which parameter to increase.
Can someone please help.
Non critical error ORA-48913 caught while writing to trace file
Error message: ORA-48913: Writing into trace file failed, file size limit [10485760] reached
the suggestion:
ORA-48913: Writing into trace file failed
*Cause:An attempt was made to write into a trace file that exceeds the trace's file size limit
*Action:increase the trace's file size limit.
Thanks in advance.

Hi ,
I have one more doubt :
ORACLE_SID=XXXX
/XXXX/XX/ofaroot/XXXX/diag/rdbms/xxxx/XXXXX/trace
Non critical error ORA-48913 caught while writing to file "trace /XXXX/XX/ofaroot/XXXX/diag/rdbms/xxxx/XXXXX/trace/XXXX_ora_8218.trc"
Error message: ORA-48913: Writing into trace file failed, file size limit [10485760]everywhere its written to increase the parameter max_dump_file_size or to relocate the alert log, but as far as i understand ,
is this because a trace file with the name XXXX_ora_8218.trc was getting generated with a greater size than the one defined in max_dump_file_size. Is this what happened ?
Also , I am not able to find what directory does this parameter points to ? is it the trace directory or diag directory ?
i checked select * from v$diag_info ,but i could not find any conclusion.
Probably , on getting the above info , i will be able to decide where to move the alert.log to create space.

The processing of Group Policy failed. Windows attempted to read the file...

Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.

Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again!

Attempt to process file failed with java.lang.StringIndexOutOfBoundsExcep..

Hello All,
I am implementing file2file with file going from shared folder to FTPS server.
I am using TLS and X.509 certificate in file receiver communication channel.
when I implemented my scenario, this is the error its throwing :
Success : Connect to FTP server "my ftp address", directory "/TEST/"
Error : Attempt to process file failed with java.lang.StringIndexOutOfBoundsException: String index out of range: 3
I know this error is caused when java expects the 3 character length string and if its getting more than that... Does any faced this kindaa problem before...Any help is greatly appreciated....Obviously even points....
Thanks,
Ravi

There is no custom code at all? No mappings, no custom modules, no pre/post processing commands?
Also, check if you get this error when sending to ftps server without certificate (or with another certificate). It may be an incompatibility issue with certificate.
Did you import the .pfx (or .p12) file in KeyStorage Service?
Regards,
Henrique.

I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.

I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.

I don't know who you talked to, but some of the support techs tend to look at CS5 as "no longer sold or supported" and usually don't want to mess with it.
We are mostly user-volunteers and have time to help you out. Some of us get perks from Adobe, but we are not employees.
I actually gave you the links to the two very important CS5 updates, but you want to peruse this general list Adobe - Photoshop : For Windows
and get the Bridge CS5 updates as well. Adobe - Bridge : For Windows

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

Importing Business Contetnt Provider .car file failed

Hi Friends,
The importing of Business Content Provider (BCP) .car file failed in MSY. I have a crystal report which uses this BCP. I want to import the BCP first then the reoport but, i could not import the BCP. It is saying that "process completed with errors". I don't have the entry of this BCP in the MSY or in the table SMOBCP.
Could you help me to import the BCP.
Thanks in advance.
Best regards,
Swarna Seeta

Hi Swarna,
Import Export tool provided as part of MSY application is not very reliable i.e. it is very common to get "Process completed with errors" message while using it. Sometimes even if it gives this message, the entries will get inserted in the database. In your case it has not worked.
The best option is to open an OSS for SAP to look into it.
regards
Vivek

Failing to import files correctly from Handycam DVD camera

Hi,
I try to import files directly from my Sony Handycam DVD camera to PRE8 by inserting the DVD in the PC.
There is only audio at the first part of every file. Approximately the first 20 - 30 % of the total video length. The sound does not appear neither in playback in W media player, Quick Time, W movie maker or PRE. Why am I missing the audio?
What is the best way to import for editing in PRE?
What is the best file type for editing in PRE?
What is the fastest way for converting, if needed?
My handycam camera provides wide screen option. But the wide screen in PRE8 seems to be "wider" than the camera...

Seems like this got the answers to most of my problems
That "More Like This" area can really work sometimes. Glad that you saw it, and that it helped.
If you have more issues, please let us know and good luck,
Hunt

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

Import Script to skip first 6 lines of a txt file

Hello,
Can anybody help me here? I am looking for an Import Script in Upstream that will ignore the first 6 lines of the TXT file I am importing. FYI - The first 6 lines is the header and I don't want this to be imported as it results in error.
Can you help? Thanks,
James

Even with fixed format files you shouldn't be getting error for the header lines in the file because there is no amount in those lines,, however if you are still getting the error, you can try this, it may help,
There are temporary variables you can use for this kind of needs: RES.PvarTemp1 to 5
so, you will need to put a script in amount field, let's say "getLineNumber"
function getlinenumber
If Len(RES.PvarTemp1) <= 6 Then
RES.PvarTemp1 = RES.PvarTemp1 & "1"
RES.PblnSkip = True
End If
end function
this should do the work, if you are using RES.PvarTemp1 for other purposes in your scripts, use another temp variable.
hope this helps
Bulent
Edited by: Bulent Yildiz on Oct 26, 2009 4:59 PM
Edited by: Bulent Yildiz on Oct 26, 2009 5:02 PM

Import files fails on first attempt

Similar Messages

Maybe you are looking for