Import files from Canon XF300?

I have cs5 and final cut pro x. They are just too much for me.
I just got a new pc windows 8 and I would like a nice little program to sew some clips together and not break the bank. I was hoping that the Premiere Elements 12 would do this.

Jerry Schmidt
I would just make this note.
Whether your camera cost $4000 or $25, its recordings need to be in a format compatible with Premiere Elements for you to edit the footage in Premiere Elements.
http://helpx.adobe.com/photoshop-elements/kb/supported-file-formats-premiere-elements.html
http://www.adobe.com/products/premiere-elements/tech-specs.html
ATR

Similar Messages

Do I need to upgrade both LR 5.7 and Camera Raw 8.7 to import files from Canon 7dMark2? or is LR 5.7 enough or is camera raw 8.7 enough

Do I need to upgrade both LR 5.7 and Camera Raw 8.7 to import files from Canon 7dMark2? or is LR 5.7 enough or is camera raw 8.7 enough

Lightroom is a complete stand alone program and does not require you to have any other Adobe product on your computer.
Adobe Camera Raw is a plugin for Photoshop CS and is not require by Lightroom nor is it used by Lightroom.
However if you are using both Lightroom 5 and Photoshop CS6 /Photoshop CC and wish them to 100% compatible then you will need to update the ACR Plugin in Photoshop.
Lightroom 5.7 will work fine with your Canon 7dMk2. (Its internal processing engine is the equivalent of ACR 8.7)
To wit LR 5.7 is an alternative to ACR 8.7 Plugin in Photoshop, you do not necessarily need both.

Import files from canon 5Dmark111

Importing footage from canon 5D mark 111, in log and transfer won't allow me to import. i was advised to first compress footage on compressor, would that render importable files.
maybe won't import because there are some JPEG files amongst the mov files.???

Sorry, log and transfer won't work with the Mark III....the plugin doesn't list it on the supported cameras. You need to use COMPRESSOR and the ProRes 422 for Progressive presets.

Importing files from Canon Vixia HF20 without power adaptor.

Hi There,
I recorded videos on my Canon Vixia HF20 and no longer have the power adaptor for the camera. Everytime I go to import the videos into Final Cut Express, the camera says 'connect to power adaptor'. Is there a way to get the files from the camera without purchasing a power adaptor?
Thanks for the help!
Mitch

I have an external battery charger that requires me to take the battery out of the camera. Something like this: http://www.canadatekk.com/battery-charger/canon/3811.htm
After searching and searching, I did just end up ordering one off Amazon. Hopefully it gets here before Christmas!
That being said, is there even a way to import videos without the power adaptor?!

Can't importe MXF-File from Canon XF300, 4.2.2 codec

premiere pro 4.2.1 say the video is too big; doesn't CS4 support this codec???

sounds suspiciously like the prores 4.2.2. from panivision genesis..maybe close to hdcam hd...
some info on that stuff that might help determine custom settings, maybe conversion first without loss...etc..
hdcam hd
http://www.apple.com/finalcutstudio/resources/white_papers/Sony_XDCAMHD_whitepaper.pdf
Ingest
Once all footage has been shot, it must be transferred to a computer hard disk for
editing and converted into a format editable by Final Cut Pro. Although the XDCAM
HD camera records directly to digital files on the Professional Disc, the files are stored
in a special file type called MXF (Material Exchange Format).
In order to edit the files in Final Cut Pro, the data within the MXF files must be transferred
to QuickTime files. This translation does not damage or cause quality loss to the
video files. The MPEG HD data is simply unwrapped from the MXF file and rewrapped
in a QuickTime file.
One additional benefit of the XDCAM HD format is that low-resolution proxies of every
clip are automatically created and stored on the Professional Disc media. These proxies
allow you to quickly view the clips before importing the full-resolution data and
choose which clips to ingest and which to leave on the Professional Disc media. You
can even log different sections of the proxy clips (using In and Out points) to avoid
importing unwanted parts of the full-resolution HD files you may not need for editing.
more info
http://bssc.sel.sony.com/BroadcastandBusiness/docs/brochures/v-2320.pdf
ps...I imagine the camera manufacturer would have info available for editing this material , maybe free software for "capturing", conversions, etc

Aperture 3.0 not importing RAW files from Canon T1i

I have recently upgraded to Aperture 3.0. I shoot with Canon T1i in RAW+JPG file size. When importing files from Canon T1i for the first time to Aperture 3.0, I found that all files imported as jpg not RAW. How do I get the RAW files? Help!!!
Anjali

It does support Canon T1i RAW mode. In the "Import Settings", there's a section for "RAW+JPEG Pairs". If you don't see this, click the "Import Settings" pulldown menu and select it.
In the "RAW+JPEG Pairs" section, there's a pulldown menu to allow you to select "Both (RAW as Master)"
It'll use the JPEG as the "Preview" image, but it will use the RAW as the master for all adjustments you want to perform.
Prior to the import, you should see both the JPEG and RAW (.CR2) files. AFTER the import, you should only see the RAW in your project (it has the JPEG... but it wont normally display it because it knows the RAW is the master.) After the import, select any photo in your project, then click the "metadata" tab on the left. At the top it should give you the camera, lens, exposure info, etc. and you should see the "RAW" icon.

How do I import files from My Canon XF300 into FCPX

This is driving me mad, I am trying to import files from my Canon XF300 into FCPX I have tried everything but no sucess any help would be welcomed.
Regards
Fred

Frederick0245 wrote:
Is there a plugin for FCPX Ver 10.0.7, I found one for FCP 7 but that doesn't work. I also downloaded The Canon XF Utility but although this opens the clips from the camera I am unable to get the clips into FCPX.
Fred,
Sorry, I mis-spoke. I do have Canon Utility installed on my SL machine, but have used it mainly as a file review interface and as a backup utility. My MXF files are then brought in via Log & Transfer in FCP 7, which requires one of the plug-ins (and as you noted, does not work with FCPX).
In the majority of situations I'm ingesting on location to a MBP running Lion. In that case, I have the option of importing them either into FCP7 or FCPX.
A came across this hack for getting the Canon plug-in to install on SL. It looks straightforward but I haven't tried it, so if you do, proceed at your risk. As for me, my plans are to partition my drive later this month and boot from both 10.6 and 10.7 as necessary.
Good luck.
Russ

Cannot import video file from Canon Vixia hfs10 to imovie'11.

Hi this is my first post on this site.
I am having trouble trying to import video files from Canon Vixia hfs10 to imovie'11. The computer does not even recognize this camcorder. When I do a PC connection, iphoto comes up, but all it tells me to import are the pictures that I have taken.
No matter what I do, I cannot find the folder for my camcorder in the device section in the finder.
When I try to import it on imovie, I only get an option for facetime camera and not my vixia.
Please help!

Hi this is my first post on this site.
I am having trouble trying to import video files from Canon Vixia hfs10 to imovie'11. The computer does not even recognize this camcorder. When I do a PC connection, iphoto comes up, but all it tells me to import are the pictures that I have taken.
No matter what I do, I cannot find the folder for my camcorder in the device section in the finder.
When I try to import it on imovie, I only get an option for facetime camera and not my vixia.
Please help!

LR 5.5 Doesn't work. Won't import files from Sony or Canon

Since initially downloading LR 5, I have been unable to import files from my Canon 7D, Canon 5D Mk3, or my Sony Nex 7. All three cameras are running the latest firmware versions.
I'm using an Apple 27" IMac, with 3.4GHz Intel I7, with 16Gb 1333Mhz DDR3 ram.
The ONLY way I've gotten LR 5.X to import any images has been to move them from the memory card, to a folder on the desktop, and then import them from that folder.
Anything else I try results in a dialogue box that tells me the images can't be imported.
LR4 works just fine, and I have no issues importing files from any of my three cameras with it.

When I try to import anything, a dialogue box pops up, titled "Import Results"
Below that, it says "Some import operations were not performed",
Then, below that, it says "The following files were not imported because they could not be read." And it then lists individually all the images I tried to import.
I then have the option to "Save As", or "Ok".
When I click "Ok", it ejects the card, and "No photos in Current Import" appears in the middle of the screen.

Must I use a converter program to import movie files from Canon powershot s95?

Must I use a converter program to import movie files from Canon powershot s95?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
With Elements 11 you cannot.
The SX60 HS was first supported in Camera Raw 8.7 which is only compatible with Elements 13 and later.
Options:
Pay to upgrade to Elements 13
Free option: download the Adobe DNG converter, convert all SX60 HS Raw files to DNG format then edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

CANNOT import RAW files from CANON 40D to Lightroom 1.2

My color setup in 40D is sRGB
my system is windows XP
but when I want to import files from my CF card
it will show the message: some import operation were not performed.
the files use an unsupported color mode.
pls tell me how to solve this problem~

Sorry for the above post. My daughter hit the keyboard. I am having the same trouble and I have tried shooting in Standard Raw and with the attached Jpg. I get a message that states it is a unsupported color format. Any ideas? It sounds like everyone else has got this to work but it simply will not work for me. I am running Vista if that makes a difference.

When will Elements11 support CR2 files from Canon 70D ? Or is an upgrade necessary ?

As it is now RAW files from Canon 70D is not recognized by Elements 11. And Adobe don't ship any upgrade, only to Lightroom and PCC/Bridge. Is there a workaround ?

PSE 11 will not be upgraded to support this camera. You need either:
Purchase PSE12 or PSE13 ... or ...
Download and install and use the free Adobe DNG Converter version 8.2 or later, convert your RAWs to DNG and then import the DNGs into PSE 11

Can't import RAW from Canon EOS 400d

Hi,
i cannot import/see my RAW Files from Canon EOS 400d. My Aperture Version is 2.1.4. Is there any way to do this or will this model not be supported? I try some RAW Compatibility Updates but it doesnt work.
Thx4help & sry for my english.

done, it was my vault - no problem to import - the settings of my Camera was not correct ... sry

Can't import AVCHD from Canon F10 into FinalCutPro 6.0.4 via USB

Can't import AVCHD from Canon F10 into FinalCutPro 6.0.4 via USB. When opening Log&Transfer in FCP, no files show up (the Log&Transfer window do not seem to recognize the files on the camera). The camera shows up in Finder, though. - Do I need a driver?

sorry, of course USB is available for L&T, I use it every Friday so I should know better, I got two replies mixed up completly so thanks for correcting my mistake.
what I meant to suggest was if the camera does not show in finder or in L&T check the camea menu setting is set to connect to the hard drive and not from the camera or memory card.

How can i run Lightroom 3.6 with RAW files from Canon 650D?

How can i run Lightroom 3.6 with RAW files from Canon 650D?

Download the newest DNG converter from Adobe, convert your RAW photos to DNG, and then Import into Lightroom.

Import files from Canon XF300?

Similar Messages

Maybe you are looking for