Import files from memory stick on Sony CX-100

Hi, I have several CX-100s and two iMacs - having the same problem with both. I have borrowed a memory stick from one CX-100 and put it in another (both PAL). I can view the footage on the memory stick through the camera, but when I connect the camera to iMovie, it will only view/import the old footage filmed on the other camera. The footage is definitely on the memory stick, but it's as if it's in another chapter on it or something? Has anyone seen anything like this before or know a method I can retrieve this footage into iMovie? Thanks in advance.

Have you recorded any SD (MPEG-2) clips on the memory stick on the other camera? If so, you have to first erase the SD content before iMovie will recognise the HD (AVCHD) content. This assumes of course that you have recorded in HD format on the camera you are now trying to connect. If it is SD format you should be able to access it through iMovie.
This Apple support article spells things out:
http://support.apple.com/kb/HT1793
Although your camera is not mentioned in the article, the same principles apply. Your camera is listed in this iMovie '09 Camcorder Support article, which shows a link for your camera to the above support article: http://support.apple.com/kb/HT3290#2
If this doesn't help, try connecting to iMovie using a card reader, rather than connecting the camera.
John

Similar Messages

Transfer file from memory stick and add as Attachment to email

How to transfer file from memory stick to email attachment? I would like to send the whole folder. Plz help. tks!

I think you should use the winzip freeversion to zip the folder and attach the same to mail and send them to yr receipents.
http://www.winzip.com/mac/en/product_overview_mac.htm
regards

Importing AVCHD from Memory Stick

Hi-
At work I've been going through the delightful experience known as AVCHD *$%!...thought I had my head around it and a plan of attack decided (sadly, I was going to suck it up and use a PC, so I could drag and drop files) when I relized my PC didn't have the power.
So, now I'd like to use the memory stick that my Sony HDR-SR12 recorded onto and Log & Transfer the footage into FCP, but I'm having a problem: It recognizes the video files, but when I go to transfer, it quits about halfway through. The note in the transfer log says 'no data'. Is this because it's not possible to transfer from a memory stick, or am I overlooking something?
Some background- I'm trying to set up a system for recording presentations in a number of our offices and we don't want to send cameras back and forth across the country. We thought memory sticks would be better/safer to send around. Some of our presentations can be long, so we wanted to get away from tape with its recroding limits.
Thank you so much for any tips!
dmart

Yea I hear you, i have both formats in HD the AVCHD the later...I thought wow this should be a easier way ...NOT!!!!

Error message when trying to copy files from memory stick to MacBookPro

Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
I've never had a problem before today. Any help will be welcomed!

Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
Bryan

LR 5.5 Doesn't work. Won't import files from Sony or Canon

Since initially downloading LR 5, I have been unable to import files from my Canon 7D, Canon 5D Mk3, or my Sony Nex 7. All three cameras are running the latest firmware versions.
I'm using an Apple 27" IMac, with 3.4GHz Intel I7, with 16Gb 1333Mhz DDR3 ram.
The ONLY way I've gotten LR 5.X to import any images has been to move them from the memory card, to a folder on the desktop, and then import them from that folder.
Anything else I try results in a dialogue box that tells me the images can't be imported.
LR4 works just fine, and I have no issues importing files from any of my three cameras with it.

When I try to import anything, a dialogue box pops up, titled "Import Results"
Below that, it says "Some import operations were not performed",
Then, below that, it says "The following files were not imported because they could not be read." And it then lists individually all the images I tried to import.
I then have the option to "Save As", or "Ok".
When I click "Ok", it ejects the card, and "No photos in Current Import" appears in the middle of the screen.

How do I move files to memory stick using Vista

Can anyone throw any light on my new problem .
I am using Windows Vista Home on my Toshiba Satellite 350 and I am trying to save a file to memory stick.
I locate the correct file and click on ' send to removable disc '
I then get an 'Item not found ''box which contains the message ,
''Could not find this item This item is no longer located in C:\Users\Desktop.
I ( Or wherever am looking) Verify the items location and try again''
I have checked the location and I have the correct one .
I have tried this many times with different types of files/locations and I get a similar message every time I try to move the file to anywhere , not just the memory stick
I have tried dragging the files in to the box and get the same message ,copying and pasting does not work I still get the same message ?
Whatever am I doing wrong ?

Thank you for the reply
Yes, I do know how to copy and paste but as you see from my question I get an 'Item not found ''box popoping up which contains the message
''Could not find this item This item is no longer located in C:\Users\Desktop. I ( Or wherever am looking) Verify the items location and try again''
BUT the files are there .
I have tried this many times with different types of files/locations and I get a similar message every time I try to move the file

Import Files from Nikon Transfer 1.0

I am evaluating Lightroom 5.3. I want to import files from a Nikon D800. I was able to import photos directly from the camera memory card, however I have not been able to import photos that I previously transfered from the memory card to my hard drive using Nikon Transfer 1.0 program. Is there a way to get these files to import into Lightroom?

JimHess wrote:
I think Rob Cole has access to something that will fix your images. Hopefully he will see this and follow-up.
Phil Harvey wrote a fixer-upper:
http://www.sno.phy.queensu.ca/~phil/exiftool/
(utility app at the very top).
~R.

I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing!

I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing! Help!

Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
tt2

I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone? Thanks!

I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone? Thanks!

iTunes will only import music from your phone that was purchased from the iTunes store. To transfer music from other sources you have to use 3rd party software, such as PhoneView.

What plug-in do I need to import file from scanner to make a batch job

what plug-in do I need to import file from scanner to make a batch job

Hi Atul,
I`m having PS Elements Ver.13 and scanner Epson V500 Photo.
Nice if your can help me.
Sten

How to Export data to memory and Import data from memory?

hi
I have the follwoing some code of program.
The data is not filled from memory. I have to find what is the wrong in code.
REPORT ZIFT_TEST1..
SELECT-OPTIONS : so_budat FOR bkpf-budat,
sd_saknr FOR ska1-saknr.
EXPORT so_budat TO MEMORY ID 'ZBUDAT'.
EXPORT sd_saknr TO MEMORY ID 'ZSAKNR'.
SUBMIT ZIFT_TEST2 AND RETURN.
REPORT ZIFT_TEST2..
SELECT-OPTIONS so_budat FOR bsis-budat NO DATABASE SELECTION.
SELECT-OPTIONS: SD_SAKNR FOR SKA1-SAKNR MATCHCODE OBJECT SAKO.
import so_budat = so_budat from memory id 'ZBUDAT'.
import sd_saknr from memory id 'ZSAKNR'.
Regards
Iftikhar Ali
Islamabad.

Program1----
REPORT demo_program_rep3 NO STANDARD PAGE HEADING.
DATA: number TYPE i,
itab TYPE TABLE OF i.
SET PF-STATUS 'MYBACK'.
DO 5 TIMES.
number = sy-index.
APPEND number TO itab.
WRITE / number.
ENDDO.
TOP-OF-PAGE.
WRITE 'Report 2'.
ULINE.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'MBCK'.
EXPORT itab TO MEMORY ID 'HK'.
LEAVE.
ENDCASE.
Program2----
REPORT demo_programm_leave NO STANDARD PAGE HEADING.
DATA: itab TYPE TABLE OF i,
num TYPE i.
SUBMIT demo_program_rep3 AND RETURN.
IMPORT itab FROM MEMORY ID 'HK'.
LOOP AT itab INTO num.
WRITE / num.
ENDLOOP.
TOP-OF-PAGE.
WRITE 'Report 1'.
ULINE.
end of program 2----
Now you copy this programs with same name as i mentioned and execute demo_programm_leave Program.you will understnad clearly.
Notes::: A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.

Plz explain - IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM' ?

Hello,
Very good evening!
Can any one please explain me what this satement do.
Please explain me.......
IMPORT GS_MATNR_CTRL FROM MEMORY ID 'ZMEM'.
Any suggestions or information will be appreciated.
Regadrs,
KIttu

Hello,
Thank you for your response and time!
Points rewarded...
Have a good day!
Regards,
Kittu

Import term_rgdir from memory id rgdirid

Hi
SY-SUBRC of Following statement is 4
import term_rgdir from memory id rgdirid
Could you please suggest me what needs to be done to rectify this issue.
Regards
Sri

Either you did not export it properly or you will need some variable to import into; please see sample code below:
Program for Export
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
gv_flag = 'X'.
Export gv_flag from gv_flag to memory id id.
Program for Import
Data : gv_flag(1) type c,
id(10) type c Value 'FLAG'.
Import gv_flag to gv_flag from memory id id.
If gv_flag eq 'X'.
Endif.

IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

Can you please explain what the following syntax is doing .
IMPORT lt_pgrp FROM MEMORY ID 'PGRP'.

Hi,
Letu2019s take a scenario where we need an internal table which is in program (letu2019s say Prog_name) which contains some Employee verification data in respect of one personnel no. Now our requirement is to use the same internal table in our program, so we will first export the personnel no to a memory id.
Passing value of perner to Memory ID u2018Memo1u2019
Export pernr to MEMORY id 'Memo1'.
Now submit to the program
Submit Prog_name AND RETURN .
Now we are importing u2018it_tableu2019 from Prog_name based on the value of pernr
Import it_table from MEMORY id 'ABC' .
Now we have to add Export parameter code in target program (Prog_name).
INITIALIZATION.
import pernr from memory id 'Memo1' .
After the internal table is appended we need to export it to again memory id (Memo1)
END-OF-SELECTION.
export it_table to memory id 'Memo1' .
Thanks,
Krishna

Memory Limit for "IMPORT/EXPORT from MEMORY ID" statement

Hi All,
Can anyone tell me whether there is any memory limit exists for "IMPORT/EXPORT from MEMORY ID" statement.
Like may be we can transfer xx MB of data via this......or it is open, we can transfer any amount of data to ABAP memory via this.
Regards
Munish Garg

1. Each user sessions have external sessions and each external sessions have internal sessions.
2. The programs being executed in the internal sessions can access ABAP memory
3.ABAP memory is a storage area for internal program variables like fields, structures, internal tables,,They can be passed between internal sessions of an external session.
4. you can transfer data through ABAp memory using IMPORT and EXPORT statements
5. after IMPORT FROM MEMORY ID <id> , you can use sy-subrc to check the existance of the cluster ID. here sy-subrc is not used to check whether the Import was successful or not.

Import files from memory stick on Sony CX-100

Similar Messages

Maybe you are looking for