Import files has only imported audio, not video

I used FCP7 to capture some footage from DV PAL.
I then went to FCPX, chose "Import Files" and selected the 2 clips I had captured. I chose to copy into the FCPX events library. FCPX only imported the audio, and not the video.
This is the movie info:
DV, 720 x 576 (768 x 576), Millions
16-bit Integer (Little Endian), Mono, 48.000 kHz
16-bit Integer (Little Endian), Mono, 48.000 kHz
Is this a bug?

Hi Charlottehjc,
Welcome to Adobe Forums.
Is it happening with a specific .mov file or with all the .mov files.
Right click on the video and choose new sequence from clip, then check if the issue persists.
Also please mention are you using Windows or Mac and the version of Premiere Pro.
Thanks

Similar Messages

  • I am using elements 10 and only getting audio not video.  Can anyone please explain why? I am a total newbie to video.

    I am using elements 10 and only getting audio not video.  Can anyone please explain why? I am a total newbie to video.

    greenfrogstone
    Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
    Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
    Thanks.
    ATR

  • AppleTV will only play audio, not video

    My AppleTV will only play audio, not video via Airplay. I've verified correct settings, reset iPad, AppleTV and router with no success.  Please help!

    Welcome to the Apple Community.
    What is it that you were playing, some providers block their content from AirPlay.

  • When I import .avi files I only get audio, no video!

    When I add .avi files recorded with my Flip Video camera to the clip gallery and view, I only get audio, no video. The same happens when I try to play the clip with Quicktime. Help!

    Update to first post.
    The Flip Video camcorder records or "captures" video in MPEG-4 advanced simple profile format, saved as an AVI file.
    MPEG-4 advanced simple profile format = usually DivX
    1.) With Mpeg streamclip you should be able to convert your AVI(Divx) files to a DV format for iMovie. To open DivX files, you have to install one of the free Divx Pro codecs on your system.
    MPEG Streamclip 1.8
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    DivX Pro Codec 6.6 (6-month trial)
    http://www.divx.com/divx/mac/
    2.) Visual Hub $24 should be able to convert WMV and AVI (compressed with the DivX Codec)to a DV format for iMovie.
    http://www.techspansion.com/visualhub/
    3.) With Flip4Mac WMV Player Pro $29 you can convert your WMV files for iMovie.
    http://www.flip4mac.com/wmv.htm
    4.) With Perian 0.5 and Quicktime Pro $30 you should be able to convert your AVI/DivX files to a DV format for iMovie.
    http://perian.org/
    I hope one of these solutions work for you.

  • Help! Import only taking audio, not video

    I'm importing a 878,367KB .mov file into Premiere Pro - and while the full audio is there, the video screen is just green.
    When I put it into a sequence, the preview pane is black - and when I try to render it, it says "Error compiling movie. Unknown error."
    What can I do to fix it?
    Thanks

    Hi Charlottehjc,
    Welcome to Adobe Forums.
    Is it happening with a specific .mov file or with all the .mov files.
    Right click on the video and choose new sequence from clip, then check if the issue persists.
    Also please mention are you using Windows or Mac and the version of Premiere Pro.
    Thanks

  • I have an Apple Composite AV cable for my iPhone 4S, and it's only playing audio not video. What's going on?

    It's only playing audio but not showing video. What's going on?

    Does the app you're using support video out?

  • Asf file - can only hear audio, no video...

    i have been given an asf video and have downloaded flip4mac but can only hear audio of iot, no video...
    any idea ?
    thanks a lot in advance

    Some Windows Media formats are not supported on Mac's.
    Check the http://flip4mac.com Site for more answers.

  • TV shows downloaded from Itunes are only playing audio, not video.  What's going on?

    Hi there,
    My tv shows aren't playing.  I've checked both ones that I just downloaded as well as ones that have been there for awhile.  None are playing video -- just audio.  Any idea what could be going on here?  I did go into disk utility and repaired permissions (found this on another site), but that hasn't helped.  Dying to see that last episode of Breaking Bad!!!!  Please help if you can.

    I shut down and restarted and it seems to be working...

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • When i try to import a .mov file, it only imports audio

    when i try to import a .mov file, it only imports audio - what cani do to fix? windows media player plays it fine

    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    The Help-and-Tutorials page http://forums.adobe.com/thread/1275830 may help

  • I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files.   What am I missing here?

    I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files when both are present on the SD card.  JPGs are used for quick proofing on an iPad.    DNG RAW files are edited on a Mac Pro (2013).    Other than deleting the JPGs before importing images from the SD card,  is there any way to force Photo to select and import only the DNG images?

    Thanks Larry,
    I did see the J stacked in the lower left of the thumbnails but couldn't figure out how to get to whatever is below it.   How do you select R?  
    I use an iPad to do quick proofs of my images.   A JPG is good enough for a proof ( dust on the lens,  composition, blown out image, etc. ).   The iPad is JPG friendly and can load the images quickly.    Serious editing takes place on my Mac Pro with the DNG files.   I use the same workflow with the the Leica M 240.   iPhoto has been a quick and easy importer to the Mac capturing all of the metadata in the EXIF sidecar file ( location, date, time,  camera settings, lens type).  A quick scan in iPhoto for the "keepers" let's me export those worth editing to Lightroom/Bridge/Photoshop.  I typically shoot 50 images from three locations in a normal day.  If I'm lucky I'll get 1 worth real work to add to the portfolio.  

  • Import wizard has been importing for 2 hours what should I do ?

    Just downloaded latest version of Firefox for windows. Trying to complete installation but the Import Wizard has been Importing for over 2 hours and is still importing... what should I do so I can complete installation. ...Please advise...and Thank you

    Is that about importing IE favorites?
    If there are problems with importing IE Favorites or bookmarks from another browser in Firefox then export the favorites to an HTML file and import that file in the Firefox Bookmarks Manager.
    If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
    *Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
    *Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
    See "Import from another browser" and "Import from file":
    *http://kb.mozillazine.org/Import_bookmarks

  • Laptop HP 14d-006La has only one audio jack (mic/headset)

    Laptop HP 14d-006La has only one audio jack (mic/headset) 
    How can I solve this?
    I need to use my headset built-in mic instead of the laptop intengrated mic but it has only 1 audio jack, Can I solve this by software? or at least can I choose wether use the jack as mic or use it as external speaker?
    Thanks in advance for any help

    Hi EdgarNaranjo,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 14-d006la Notebook  and having issues with connecting a microphone. Audio-out (headphone)/Audio-in (microphone) jack connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. Be sure that the device cable has a 4-conductor, a connector that supports both audio-out (headphone) and audio-in (microphone). Here is a document on connecting a microphone.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Is there a way to check whether an Excel file has a header or not?

    Hi!
    I'm currently using POI Utility to read and write Excel files.
    You normally use the HasHeaderRow = true / false to specify whether the file has a header or not.
    Now, let's say I have a program that needs to read Excel files from a directory, some have headers, some don't.
    Is there a way to know dynamically whether a header has been defined or not?
    Then, for those having headers, the flag will be set as true, while for those which don't have any header, the flag will be set as false.
    E.g.
    <!--- Create an instance of the POIUtility.cfc. --->
        <cfset objPOI = CreateObject(
            "component",
            "POIUtility"
            ).Init()
            />
    <!--- Set directory --->
    <cfset currentDirectory = GetDirectoryFromPath(GetTemplatePath()) & "newDir">
    <!--- Check whether the directory exists. --->
    <cfif DirectoryExists(variables.currentDirectory)>
         <!--- Read files from the specified directory --->
         <cfdirectory action="list" directory="#variables.currentDirectory#" type="file" filter="*.xls" name="qDirectory">
         <!--- Check if the directory has any Excel file --->
         <cfif variables.qDirectory.recordcount gt 0>
              <!--- Loop query --->
         <cfloop query="variables.qDirectory">
                   <!--- Check if header is present in each of the file --->
                        IF headerExists THEN
                             headerFlag = true
                        ELSE
                             headerFlag = false
                        END IF
                   <!--- Read Excel File --->
                <cfset objSheet = objPOI.ReadExcel(FilePath = #variables.qDirectory.name#, HasHeaderRow = #variables.headerFlag#, SheetIndex = 0) />
              </cfloop>
         </cfif>
    </cfif>
    Any help would be most welcome.
    Thanks and regards,
    Yogesh Mahadnac  

    Hi cfSearching,
    Many thanks for your reply! I really do appreciate!
    However, I've still got 1 more question for you.
    At the moment, I'm using POI and sometimes cfx_Excel2Query to read Excel files.
    In both cases, you have to specify whether the first row is a header.
    How would you read the Excel file to check whether the 1st row is the header?
    I've tried using cffile, but I get all sorts of "garbage"
            <cffile action="read" file="#variables.filename#" variable="xlsResult">
            <cfloop index="i" list="#variables.xlsResult#" delimiters="#chr(13)#&#chr(10)#">
                <cfif variables.i eq 1>
                    <cfoutput>
                        Test 1st Row: #trim(replacenocase(listgetat(variables.i,1,","),'"',"","All"))#
                    </cfoutput>
                </cfif>
            </cfloop>
    I get the following output:
    ÐÏ à¡± á����.... etc etc
    I'd be very much grateful if you could please advise on the latter at your earliest convenience.
    Thanks and best regards,
    Yogesh Mahadnac

  • Downloaded, but File has only close as a selection. How do you open a doc?

    Downloaded, but File has only close as a selection. How do you open a doc?

    I am sorry which Adobe software or service are you referring too?  Which operating system are you using?

Maybe you are looking for