Import FM is going for DUMP

Hi All,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
I have gone dump analysis its saying
"Length error occurred during the IMPORT statement."
"The system found when importing that the target object was longer or
shorter than the object to be imported."
where did i mistake while import ? or while transport?
That FM is working properly in our DEV.
Thanks in Advance,
Madhu.

Hi Madhu,
Suggested to post this in logistics forum for better answer.
Software Logistics
Regards,
Debasis.

Similar Messages

Function module going for DUMP

Hi ALL,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
When iam Executing this FM through SE37 F8 its running but iam not able to display or change this ZFM.
In our DEV sytem it is working properly.but Client system it is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. *The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither caught nor passed along using a RAISING clause, in the procedure
MO_IMPORT_MODIFICATIONS" "(METHOD
Length error occurred during the IMPORT statement
*The system found when importing that the target object was longer or
shorter than the object to be imported*
Thanks in Advance,
Madhu.
Edited by: madhubabu rao on Apr 23, 2009 10:34 AM
Edited by: madhubabu rao on Apr 23, 2009 10:36 AM

Hi sekhar,
I did not transport individually.I have transport 3 FM in a function group and it is assigned to a Package.
First i have 2 FM in my function group after that i have copied one more FM from another Function group.
in SE80 right click -->copy it asked me function group name only .not transport number.
After copy the FM i have transport total package.2 FM are working properly .The FM which i have copied it is not able to display or edit.
Madhu

Call for adobe form is going for dump for multiple users

hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....

That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham

Duplicate records in PO scheduled line for framework order (going for dump)

Hi all,
i am creating framework purchase order with item category B. I am assigning external number range for PO. This PO is created with respect to expense PR. i just found there is duplicate records are appearing in schedule line for the same item.
Then, after i save the PO, it is going for dump & sending some message to SAP inbox that there is duplicate records.
later i can not find those PO in the system. Please let me know where i am doing mistake ? why duplicate records are appearing in PO scheduled line ?
Thanks a lot
pabi

Hi,
Once you please debug the particular program with the help of ABAPer. That may resolve your issue. Thanking you

Standard Tcode : VA01 is going for Dump

Hi all,
While creating sales order in VA01, the screen number 4003 having arrow Buttons Shift + f5 , Shift + f6 , Shift + f7 , and Shift + f8. If i am pressing that it is going for dump can any body help me why it is going for dump in ECC 6.0 . But it wont happend in 4.5B. Can any body help me in this problem.
Thanka & Regards,
Rajasekhar.

What is the error from the dump?
Rob

At F4IF_INT_TABLE_VALUE_REQUEST program goes for dump

Hi,
The following piece of code in my program goes for dump.Please help:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_screen-low.
SELECT FIELD1 FROM TXXX INTO TABLE T_field.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD               = s_screen
        TABLES
          VALUE_TAB              = T_field.
    ENDIF.

Hi,
I think you need to write
Try with the below code.
PARAMETERS: p_bukrs(4).
DATA: BEGIN OF itab OCCURS 0,
       bukrs LIKE t001-bukrs,
      END OF itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
SELECT bukrs FROM t001 INTO TABLE itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS' ---> Field from internal table Itab
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'P_BUKRS' --> Screen field
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
If it is a select option is s_bukrs then
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_BUKRS-LOW'
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar Bandanadham
Edited by: Velangini Showry Maria Kumar Bandanadham on Jun 12, 2009 7:00 AM

Missing important image functions - going for Hype

I made a product presentation with a meny system and aniamtions using Edge.
I unfortunatelly found some very important functions were missing.
So I´m going for Hype now, that has got all of these.
So all the job has to be doe again :-(
I didn´t find any feedback area for Edge Animate, so I´m putting it here. The things missing are:
- Automatic Image optimization (like in Muse)
- No support for PSD
- No retina support
- Can´t replace image, e.g from PNG to JPG (I made it thou by editing the JS-file, but that seems scary)
These are all small matters for Adobe to fix and I suppose they are doing this in the future.
I really like Edge Animate thou, but since it lacks important workflow functions I can´t use it in production.

Hi,
Thanks. Yes, that worked.
I actually didn´t find this because in all other Adobe applications, this is done from the Library panel.
I really stress the importance for you to make your/Adobe applications the same. We users love Adobe apps, but are really not liking the unnecessary different solutions in some of them. It´s frustrating and a complete waste of time.
I actually remade the whole animation using (Tumult) Hype.
It´s much easier to work with. Edge seems good to work with Javscript, but with Hype editing Javascripts is not as much necessary since there are pre-made solutions.
You should also look into some things Hype has that is really important:
- Automatic generation of Retina images
- Automatic resampling of images
- Scenes (a very nice way to work)
All in all, Hype is much more efficient to work with.
A thing that I do want in Edge (and Hype) is
- When using Photoshop originals, it should be possible to set how each image should be exported, i.e as JPG (and setting quality) or PNG.
In the real practical user world, we do only want ONE image to carry around for different purposes, it.e web, animations, videos, print.
And when designing (doing layout) in i.e Edge, I do not always from start know if the image could be in JPG or if it must PNG because it is e.g. overlapping.
The feature of settings export options for Photoshop images, I also would like to see in Muse. As well as Retina support in Muse that i REALLY want.
I like Edge (and really like Muse), but as it is now, selection Hype is an easy choice over Edge.
I hope that you do update Edge to support an extremely good workflow - then I will certainly selected Edge, since I already do pay for it anyway
Best regards
Bosse Nilsson
Tel +46 (0)703-233 150
2014-02-11 kl. 19:28 skrev elainefinnell <[email protected]>:
Re: Missing important image functions - going for Hype
created by elainefinnell in Edge Animate CC - View the full discussion
Hi, man&mouse-
Please note that there is a way to swap images, though it will try to fit the new image into the old dimensions.
Select your image element
In the properties panel, look at the Images section
Next to the image name, select the double arrow key
Select your new image (must already be in the Library)
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6110226-548268/437-302/ScreenShot2014-02-11at10.27.07+AM.png
Hope that helps!
-Elaine
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6110226#6110226
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6110226#6110226
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6110226#6110226. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Edge Animate CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Going for dump while using field symbols

Hi all,
   I am using field symbols in my program. Program is going dump for some company codes and working fine for some company codes.
I am confused. Please check this code where the error is shown.
LOOP AT i_final ASSIGNING <fs_final>.
    AT NEW belnr.
     if <fs_final>-wt_withcd = 'SF' or <fs_final>-wt_withcd = 'XF' OR <fs_final>- wt_withcd = 'WF'.
      MOVE <fs_final> TO wa_final1.
      g_qsatz = wa_final1-qsatz.
      APPEND wa_final1 TO i_final1.
      CLEAR wa_final1.
     ENDIF.
    ENDAT.
    READ TABLE i_final1 ASSIGNING <fs_final1> WITH KEY belnr = <fs_final>-belnr.
    IF <fs_final>-wt_withcd = 'SF'.
      <fs_final1>-wt_withcd1 = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb1 = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    IF <fs_final>-wt_withcd = 'XF'.
      <fs_final1>-wt_withcd2 = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb2 = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    IF <fs_final>-wt_withcd = 'WF'.
      <fs_final1>-wt_withcd = <fs_final>-wt_withcd.
      <fs_final1>-wt_qbshb = <fs_final>-wt_qbshb.
      <fs_final1>-qsatz      = <fs_final1>-qsatz + <fs_final>-qsatz.
    ENDIF.
    AT END OF belnr.
      <fs_final1>-qsatz = <fs_final1>-qsatz - g_qsatz.
      clear g_qsatz.
    ENDAT.
ENDLOOP.
Please check the code and help me.
Thanks in advance,
Shalem

HI Shalem
Please check this code:
LOOP AT i_final ASSIGNING <fs_final>.
AT NEW belnr.
     if <fs_final>-wt_withcd = 'SF' or
        <fs_final>-wt_withcd = 'XF' OR
        <fs_final>- wt_withcd = 'WF'.
        MOVE <fs_final> TO wa_final1.
        g_qsatz = wa_final1-qsatz.
        APPEND wa_final1 TO i_final1.
        CLEAR wa_final1.
     ENDIF.
ENDAT.
READ TABLE i_final1 ASSIGNING <fs_final1> WITH KEY belnr = <fs_final>-belnr.
IF sy-subrc EQ 0.
     CASE <fs_final>-wt_withcd.
     WHEN 'SF'.
          <fs_final1>-wt_withcd1 = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb1 = <fs_final>-wt_qbshb.
     WHEN 'XF'.
          <fs_final1>-wt_withcd2 = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb2 = <fs_final>-wt_qbshb.
     WHEN 'WF'.
          <fs_final1>-wt_withcd = <fs_final>-wt_withcd.
          <fs_final1>-wt_qbshb = <fs_final>-wt_qbshb.
     ENDCASE.
     <fs_final1>-qsatz = <fs_final1>-qsatz + <fs_final>-qsatz.
     AT END OF belnr.
        <fs_final1>-qsatz = <fs_final1>-qsatz - g_qsatz.
        clear g_qsatz.
     ENDAT.
ENDIF.
ENDLOOP.
Kind Regards
Eswar

GGB0 is going for Dump

*Hi Freinds,
*When i enter the transaction code GGB0 it is giving the dump at class *cl_badi_flt_data_trans_and_d* method ACT_IMPS_PER_FLT_VA is giving the error like Multiple Active Implementations for Single BAdI .
Please let me know what does it mean and how can i solve this issue.
When enter the class cl_badi_flt_data_trans_and_d in SE24 and try to display or tring to activate it is gonig for the dump and showing the error Multiple Active Implementations for Single BAdI .
Please let me know if any body has face the same error .
Regards,
Tirumal.

Hi Tirumal,
I kept a debug point in the class CL_BADI_FLT_DATA_TRANS_AND_DB method ACT_IMPS_PER_FLT_VALthen i got this badi CTS_CURRENT_PROJECT which is called in the transaction. I think this badi implemented multiple times in your system.Please check and see and post.
Regards,
Madhu.

My import FM is going DUMP

Hi All,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither
caught nor passed along using a RAISING clause, in the procedure
"MO_IMPORT_MODIFICATIONS" "(METHOD)"
"Length error occurred during the IMPORT statement."
"The system found when importing that the target object was longer or
shorter than the object to be imported."
where did i mistake while import ? or while transport?
That FM is working properly in our DEV.
Thanks in Advance,
Madhu.

Hello,
I would like to know how did you solve the issue as i came across the same issue.
Thanks,
FBK

MIGO screen goin for dump

Hi All,
My MM consultant is getting this error
Runtime Errors         SAPSQL_INVALID_TABLENAME
Except.                    CX_SY_DYNAMIC_OSQL_SEMANTICS
i have no idea where to start from... can anyone guide me...

Hi Dez,
I debugged the program.
In
If t681-ksdat is initial.
if se_read_all_prestep is initial.
no value is passed to ksdat and se_read_all_prestep.
and when the command goes to select query it goes for dump.
t681-kotab value is B570.
<cond_tab> only field name DATA is visible.
se_kschl   =   GRDO.
se_kappl   = ME.
When i checked error analysis, it showed "An invalid table name "B570" was specified".

Dump error while going for a change mode in MIR4 for parked document

Hi All,
After doing some GR and MIRO for one PO, there was some GR qty was left and I have parked new invoice document in MIRA. If I go for change mode MIR4 for the same parked document it is going to dump error as message type unknown, saying entry is not maintained table TTXD for Tax procedure. This table indicates that Tax jurisdiction, but we are not maintaining the Tax at Jurisdiction level. I found that user has activated calculate tax in MIRA and posted with some amount, here system will not calculate the tax in Tax field because base amount is not there to calculate, so that field shows "zero". For the same parked document in MIR4 I can see some lines which has value 0 in amount & quantity(already cleared GR's for the same PO) and also GR lines.
Can anyone tell me how can I solve this dump error, I want to delete the parked document in legal way.
Regards
Shanu

Hi Shanu,
Please extract complete dump error by T code ST22 and take a help of your ABAP Team for an analyse the possible cause of dump and also check the relevant note for resolving this dump error.
Regards,
Santosh

SM30 going to dump for a Ztable whose fields I recently changed

Hi All,
Need to resolve a very urgent issue. We added a new field to a Ztable in DEV & hit the table maintenance generator with screen 8. However when I transport these changes to TS1, the SM30 transaction goes into dump with the error stating screen "009" missing.
When I created screen "0009" in DEV and retransport to Test, I still get the same error.
what can the error be here?
Thanks,
Tejas

Hello,
Once the fields of the table is changed then u need to adjust it in SE14 Tcode.
Then delete the existing Table main. and recreate it.
Vasanth

Depot Sales -J1IJ while choosing excise invoice going to dump

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference.
we are facing issue in J1IJ, when we click on the Choose button (first button below select Excise invoice for delivery statement), we need to get the Excise Invoice number reference which is captured at Plant. When we tried to click on that Choose button, we are not getting any excise invoice numbers and instead itu2019s going to dump .
Dump analysis says:
Runtime Errors         SYNTAX_ERROR
Date and Time          14.09.2009 16:43:01
     Short text
          Syntax error in program "SAPMJ1IK ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPMJ1IK " in include "MJ1IKF01
           " in
          line 38:
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
          The include has been created and last changed by:
          Created by: "SAP "
          Last changed by: "SAP "
          Error in the ABAP Application Program
          The current ABAP program "????????????????????????????????????????" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          The following syntax error was found in the program SAPMJ1IK :
          "Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
          "d tables nor defined by a "DATA" statement. ."
     Trigger Location of Runtime Error
         Program     ????????????????????????????????????????
Could any body help me out to come out of this issue.
Thanks&Regards
Sreekanth

Hi Sreekanth,
If this is first time you are doing look for OSS notes, Please escalate this issue to your basic and apap consultants.
R u following the following flow in case of stock transfer from mfg plant to depot plant.
PlantA:
ME21N
VL10B
VL02N
VF01
J1IIN
Plant B:
MIGO - (Goods Reciept & Excise Capture)
VA01
VL01N
J1IJ
VF01
Here at goods reciept you need to capture excise inviove same will populate when you make a sales from plant B using J1IJ transaction.
Thanks,
Swamy H P

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Import FM is going for DUMP

Similar Messages

Maybe you are looking for