Import for remote control

If I install desktop management agent on our XP workstations will those
clients get automatically registered, and imported upon login? The goal is
to have workstations registered and imported in order to have
them created for remote control.
Mike

There is no error. The console screen from the server is just blank showing
no activity. When I deleted the server policy the screen still had no
activity. I should have gotten a message on the console indicating that no
policy exists.
On a functioning server with autoimport enabled, a message will be displayed
showing that a workstation was created. In this case nothing happens, and
the workstation doesnt get created.
"Timothy Leerhoff" <[email protected]> wrote in message
news:VzUCd.15438$[email protected]..
> > unable to auto import
>
> What error are you getting on the PC during import? Please post the
> error log.
>
> --
> Timothy Leerhoff
> Novell Support Forum Volunteer Sysop

Similar Messages

Does Av digital adapter works with the universal dock for remote control?

if I only connect the Lightning to 30 pin adapter to the universal dock for remote control it works so good with music, spotify, Netflix, YouTube etc.
but if I add the av digital lightning adapter to watch on Tv, the dock and remote control don't work anymore what can I do? I want to watch stuff on tv and use the IR dock for remote control please help me what's going wrong?

Thanks for your advice.
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks

What rights are needed for remote control

I have a user that I want to allow remote control rights for a group of
classroom PC's. What rights do I need to give her and where do I apply
them? I have read TIDS that tell me I have to give rights at each
workstation object which I find hard to believe as its so time consuming!
Thanks in advance
Hazel

> On Thu, 27 Jan 2005 19:38:56 GMT, [email protected] wrote:
>
> > I have read TIDS that tell me I have to give rights at each
> > workstation object which I find hard to believe as its so time
consuming!
>
> depends.. if you have not eDir that's the case..
>
> but take a look at tools zenworks remote operators... which will help
you a
> lot in this case...
> --
>
> Marcus Breiden
I have edirectory and imported workstations etc .. running zen 4.1 .. I
just cant seem to figure out how to give this user rights to remote
control only one classroom.
Hazel
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Looking for remote control App (iPhone) to use with iMovie

I just got a Macbook Air, and my infrared Apple remote control doesn't work with it.
I wanted to be able to do presentations (in this case using iMovie) and be able to have a remote so that I could pause, go back, fast forward, i.e. the usual things a remote does.
There probably is a good App that I can install on my iPhone that will let me use my iPhone as a remote control, but I don't know which one. Any suggestions???? Ideally, it would be a bluetooth program (although Wi-Fi would work too) that would also work with other programs, like Keynote.
Thanks!
Dan

Well, I don't know much about this, but if you need to control the actual system in some way, you are going to need to use JNI (Java Native Interface), which is essentially embedding C/C++ code in your java app, which doesn't lend well to platform-independence. I too develop on a Mac, and there is a mailing list for Java related issues on the Mac. You can check it out at: http://developer.apple.com/java/
If you sign up for ADC (Apple Developer Connection, it's free), you can have access to these mailing lists. They've been quite helpful to me in the past. I don't mean to slam the forums here, but you are looking for a Mac specific solution, and you'd probably get more specific information on this mailing list. Hope this helps!!
James

System design for remote control

I just wonder which tech of ni I should use.
My system is one data center and some remote DAQ site. The communication is through WAN.
It need to
- start stop and schedule DAQ card from remote data center
- send realtime data back for display
- report the DAQ running status, such as online.
- send history data from site pc to center database
there are many choice, such as tcp/ip, data socket server, shared varible, remote panel, remote vi server, web server.
May I know which one is more fit for the application?
Thanks a lot.

krishh wrote:
Hi all,
I am very new to Labview, but I have to deal with somewhat difficult problem of remotely controlling the Laser in next room. The PC I will be using has already built labview software to control the laser if laser is closeby. But the laser is next door (~200-300 feet), and the PC which controls the laser also have the labview software to control the laser. Please suggest me how should I start communicating from my first PC to the laser (may be using the laser labview software or not). To start with I would be glad to find some reads or demonstrative examples or any suggestion which will head me to right direction.
I hope for great help.
Regards
Krish
It would probably be a good idea to start a new message on this rather than continue in this message thread. It seems to be a different situation you are asking about then what the original poster was doing.
How does the PC communicate with the laser if it is close by? Is it a serial connection? ethernet connection? GPIB? something else. If it is serial, is it RS-232, RS-485, USB? 200-300 feet is too far for an RS-232 or USB connection. But there are numerous products on the market that will adapt those serial protocols to either an RS-485 wiring setup, or put it out over an ethernet connection. So you can go RS-232 to RS-485 on one end. RS-485 goes to 4000 feet (depending on baud rate). Then on the other end another adapter converts it back to RS-232. I have also used a remote USB hub that connects to a LAN connection, and with driver software installed on the PC, it turns that remote connection into virtual serial port connections.
These are good devices that have worked for me. But if they would work for you all depends on how the PC connects to the laser now.

Manual for remote control

Where can I get a users manual for the remote control and the DVR features? I don't need help with programing to control my TV. I want to know about the features, menues, how to use the favorites, etc.

what is displayed as the answer - where can I get a manual for my dvr - does not address the X1 equipment I received yesterday. The remote is completely different from what is shown in the manual displayed - must be an older model, and the dvr is also completely different. Does anyone know whether these manuals are available at a Comcast center?

When will Canon start making its' own software for remote control since Pixela is so terrible at it?

It totally sucks that Canon dares sell their camcorder on the fact that YOUR smartphone is the remote control and yet they have ZERO support on the software! At present your chances are far more likely that your smartphone will not work with the Pixela software and that you WILL NOT HAVE A REMOTE CONTROL for your Canon product. Canon seems very uninterested in taking care of this problem.
How many people have bought a Canon product with the promise of your remote control being your smartphone and then not finding that they have a phones that is not “compatible” ?!?!?!? Is Canon expected everyone that buys one of these to then buy a matching phone? This is crazy and it sure puts a terrible light on Canon!
This is my first Canon product and I am NOT impressed! I have the Canon Vixia HF R42 and Android 2.3.4 and I am NOT a happy camper with Canon! Send me my damned remote control for this camera!

Canon should have a complete list of all the phones that do not work with this crappy software maker! Better yet, they should include a real remote with their cameras, but at present Canon needs to advertise that more than likely their camcorders with be remoteLESS for you! This is crazy that you don’t know until AFTER you get the Canon product home that you might have to buy a new phone to have a remote control.
This seriously SUCKS!

Digitrex ctf3271 codes for remote control

Hi I want to get my remote to control tv but I cant find my tv manual. Does anyone have the codes for this type of tv?

The updated code list is at the following URL: http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm
0027 works for my 26 inch Westinghouse, Here's the line of codes from the above website.
Westinghouse 0027, 0478, 0912, 0916

Verizon Codes for remote control for LCD TV

I just got a Westinghouse 26 in lcd tv and need the codes for my verizon remote. I check online but neither worked. They are 0912 and 0916. Can anyone help me ?

The updated code list is at the following URL: http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm
0027 works for my 26 inch Westinghouse, Here's the line of codes from the above website.
Westinghouse 0027, 0478, 0912, 0916

DTT 3500 - Looking for remote control

Could anyone help me finding for this remote control, I have damaged mine!
Thank you for your tips.
Cheers.

Hi super_user,
You may check this link for the compatibility of headsets for your Asha and Lumia phones.
Aleisha11

Restrictions on "prompting user for permission" for Remote Control

How can I go about restricting the ability to enable/disable the
"prompt
for permission" on remote control to only network admins? We want our
Help Desk to be able to remote control workstations, but not be able
to
turn of the prompt for permission. Any help is appreciated.
Thanks,
Wayne

Wlac,
It appears that in the past few days you have not received a response
to your posting. That concerns us, and has triggered this automated
reply.
Has your problem been resolved? If not, you might try one of the
following options:
- Check the knowledgebase and SolutionNet databases at
http://support.novell.com
- Check all of the other support tools and options available at
http://support.novell.com
- You could also try posting your message again. Make sure it is
posted in the correct newsgroup.
If this is a reply to a duplicate posting, please ignore and accept
our apologies and rest assured we will issue a stern reprimand to our
posting bot.
Your Novell Support Connection Forums Team
http://support.novell.com/forums/

OWB_REMOTE_ADMIN value for remote control centre service?

We're upgrading from OWB 10.2 to 11gR2, and it's failing with a message saying that the 'owb\UnifiedRepos\remote_owb_install.sql' script needs to be run to set the OWB_REMOTE_HOME to the OWB home on the database server.
However, as with our version 10 architecture, we don't want to install OWB on the database server, we want to have the Control Centre Service running on a separate application server. OWB11 has been installed on the apps server but when we run remote_owb_install.sql and then try to run OMBSEED the same error is coming up saying to run the script again. I've tried setting the OWB_REMOTE_HOME's value implicitly and explicitly, but neither works.
Any ideas or pointers gratefully received!

to add to the above information......
since I am using my own tablespace and schema as described above .....
I created a new control center through the design center user interface.......
for the new control center ...i provided the details of the above new user ...new workspace etc....
the ran the below ORACLE provided script(show_service script).....
set serveroutput on;
set role OWB_USER;
declare
l_available number(22);
begin
l_available := owbsys.wb_rt_script_util.show_service();
if l_available <> 0
then
dbms_output.put_line('Available');
else
dbms_output.put_line('Not Available');
end if;
end;
output is 'AVAILABLE'
but when I deploy my first mapping ..... I get the below error message
Error
RPE-01012: Cannot deploy PL/SQL maps to this target schema.
The target schema must be in the same instance as the Control Center and have the OWB_USER role granted
I have only one instance of oracle database .....also I have granted the OWB_USER role to my targer schema
how do i check what the Control Center is trying

Scripting for Remote Control

Hey folks,
I'm working on a project where I'd like to have a hidden track that would only be accessed when the user entered a specific number with the DVD remote. For example, while a menu or track is playing, the user could enter the number 14 and press enter on the remote, then immediately be taken to the start of the new track. Is this possible?
Thanks for any help.
Kevin

Hi Kevin
You can actually do this without scripting. Each button in a menu can be accessed via the numberpad on the remote. If you've got 5 buttons you can access the 5th button by pushing "5" on your key pad. So if you make an invisible button with no highlight states as your button 5 then the view won't know it's there but by pushing "5" you'll activate it.
In a track, you should be able to do the same thing using 'buttons-over-video', I haven't tested this so I'm not sure where the numberpad finds priority - but give it a go and let us know what happens.
Cheers
B

Qosmio X300 - Remote control and function bar for windows seven

Hi,
I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
Help me plz.
Thanks for reading
(Sry for my bad English)

Hi
The Win 7 drivers are not available for this unit at this time.
But I found some Win 7 drivers on the Toshiba US driver page.
Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
There is no big difference between X300 and X305 so the Win 7 drivers should work too

Remote control Tool for non-IT staff

Hi
We currently run ZENworks for Desktops v7 and have a requirement to
offer our financial systems team the ability to remote control users'
workstation without the need to use Console 1. All workstations are
currently Windows XP SP2 or SP3.
1. Are there any 3rd party/Cool tools that can be used to offer remote
control instead of using Console 1?
2. Do these tools require additional roles/rights?
Thank you.

You can use our DSRAZOR for eDirectory/NDS and NetWare product for this.
See the applets called "ZEN Remote Control / Remote View by User" and "ZEN
Remote Control / Remote View by Workstation" in the HelpDesk Examples
section of the DSRAZOR Console. The applets can be customized to your
needs - such as limiting which containers and/or which workstations are
shown, and allowing only remote control or only remote view (instead of
both). After any necessary modifications are made (we can show you how or
make the changes for you), save the applet as an EXE to distribute to the
people who will use it. Having the applet as an EXE means they will not
need ConsoleOne and they will not need the full DSRAZOR product either.
The example applet in the DSRAZOR Console is based on the user's own
privileges. If you do not want to grant these users their own privileges
for remote control / remote view, the applet can be modified to use our
optional Zero Privilege Helpdesk NLM. You would need one NetWare server to
run the Zero Privilege Helpdesk NLM. When you load the NLM you will specify
the name of a group (such as financial systems group). Then only the
members of that group will be able to successfully use the applet, which
they will have as a stand-alone EXE.
An evaluation of DSRAZOR is available from:
http://www.visualclick.com/?source=NVsupZen7r
"Donald Sparko" <[email protected]> wrote in message
news:eaK4m.1481$[email protected]..
> Hi
>
> We currently run ZENworks for Desktops v7 and have a requirement to
> offer our financial systems team the ability to remote control users'
> workstation without the need to use Console 1. All workstations are
> currently Windows XP SP2 or SP3.
>
> 1. Are there any 3rd party/Cool tools that can be used to offer remote
> control instead of using Console 1?
>
> 2. Do these tools require additional roles/rights?
>
> Thank you.
>
> --
>

Import for remote control

Similar Messages

Maybe you are looking for