Import from 20 MB powerpoint file yields gigantic 1.4 GB file!

Hi folks,
I imported a 20 MB file from powerpoint and made it a little bit prettier in keynote, then saved it, only to find that I had inadvertantly created a 1.4 GB file! There are very few transitions, no movies or audio, so I don't know why the file is so big. Any ideas?
Thanks in advance,
-mk

Hmm... an interesting one. I also imported a 105 page Powerpoint presentation into Keynote 3.0 - it went from 14.6MB in PP to 30.4MB in KN and it was heavy with images. BTW, you don't mention what version of Keynote you're using, which Mac/OS version, nor how many images were in the PP document.
Anyhow, a couple of things that occur to me is the possibility that linked, HiRes image files from PP are being imported [and embedded] directly into KN. I'm not too clear how PP handles images [either it places a LoRes 'imageholder' or the whole kitchen sink]. Another thought - if your PP document had a lot of images - was whether it works with OPI [Open Press Interface]. If so, it quite possibly IS placing a LoRes imageholder which is then replaced by a HiRes file on export.
But before I'd look at any of that I'd suggest removing the Keynote preferences (after quiting Keynote), found here: '~user' > 'Library' > 'Preferences' and is called: 'com.apple.iWork.Keynote.plist'. Follow that with a repair of your disk permissions with Disk Utility and then restart Keynote and reimport the PP document.
I've got my fingers crossed, good luck!

Similar Messages

Firefox can't read any Bookmark that was imported from my PC with file extension .url. Safari reads them fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox

Firefox can't read any Bookmark on my Mac that was imported from my PC with file extension .url. Safari reads them all fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox
== URL of affected sites ==
http://anysite.url
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hello JF.
I don't think that extension is supported. I believe Firefox can only read .json and .html.
You may want to read this though:
[http://support.mozilla.com/en-US/kb/Importing+bookmarks+and other data from Safari Importing bookmarks and other data from Safari]

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Import from a sample.DMP file ????? hlp???

when import from a dump file an error occurs>>>>>>
Export file created by export:v10.01.00 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully.
What can i do .... help meee??????
When i log on to sys with password as sysdba ....

Hi.
Which user did take the export?
And how is the USERID input set to imp.exe?
Rgds
Kjell

Import from a sample.DMP file

when import from a dump file an error occurs>>>>>>
Export file created by export:v10.01.00 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully.
What can i do .... help meee??????
\

Login with a user that has the DBA role...(or SYS or SYSTEM)

Massive Import from Local Flat Excel Files

Hi there,
I have to import to HANA a large amount of Data from local files (Excel Files).
I have a lot of tables with 100+ columns and like 10kk, 20kk or 30kk of rows.
At the moment i do this things:
1) Download a table from SAP in a .txt format, with like 800k rows per file;
2) I use a program to split each file into many files with 65k rows each;
3) Import the smaller file to excel. Here i keep all columns in Text type, except for Decimal Numbers for wich i use General Type;
4) I use the import feature of Hana Studio for each excel file.
So, for example, i have the table AFVC with 34kk rows. I downloaded 44 .txt files with like 500k ~ 800k rows each.
After that i split each file into like 16 files with 65k rows each one. I open excel and import each file and i have to change some coloumn types.
Now i can import each xls file into HANA with hana Studio.
So i have to import to hana like 700 files. After i imported to excel each file..
This is what i'm doing, and it's not so fast, i'm getting crazy.
What can i do to improve the load?
I don't have the FTP user yet (i requested that) and i don't have SLT avaiable.
My real problem is that with so many coloumns i can't import to hana files with more than 65535 rows, or it give me a "out-of-memory" error.
Thanks
Alessandro

Hi Alessandro,
I would try to use the import-statement.
I don't think that there's any limit, and also the error log which it creates is much more usefull then the errors shown in the import data wizard.
Greets,
ben

Xsl schema import from within a wsdl file

I have a namespace conflict issue validating a bpel process.
The message error is as follow:
[bpelc] [Error] SMSSenderEnablerSEIWrapper.wsdl.2.wsdl:19:80: src-resolve.4.2: Error resolving component 'tns2:InvocationContext'. It was detected that 'tns2:InvocationContext' is in namespace 'http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI', but components from this namespace are not referenceable from schema document 'file:/D:/home/guillaume/workspace/SMSMulticast2/services/SMSSenderEnablerSEIWrapper.wsdl.2.wsdl'. If this is the incorrect namespace, perhaps the prefix of 'tns2:InvocationContext' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'file:/D:/home/guillaume/workspace/SMSMulticast2/services/SMSSenderEnablerSEIWrapper.wsdl.2.wsdl'.
[bpelc] [Error] SMSSenderEnablerSEIWrapper.wsdl.2.wsdl:20:76: src-resolve.4.2: Error resolving component 'tns1:SMSMessageETO'. It was detected that 'tns1:SMSMessageETO' is in namespace 'http://com.osa.mdsp.enabler.sei.eto/SMSEnabler/V1.0/SMSSenderSEI', but components from this namespace are not referenceable from schema document 'file:/D:/home/guillaume/workspace/SMSMulticast2/services/SMSSenderEnablerSEIWrapper.wsdl.2.wsdl'. If this is the incorrect namespace, perhaps the prefix of 'tns1:SMSMessageETO' needs to be changed. If this is the correct namespace, then an appropriate 'import' tag should be added to 'file:/D:/home/guillaume/workspace/SMSMulticast2/services/SMSSenderEnablerSEIWrapper.wsdl.2.wsdl'.
I've already seen this kind of error in other posts, but this was encountered with xsd files. In my case, I'm trying to use complexTypes defined in a schema, defined itself in a WSDL file. The needed file (SMSSenderEnablerSEI) is referenced in the bpel.xml file.
// Here the BPEL file (SMSMulticast2.bpel)
<pre>

<process name="SMSMulticast2" targetNamespace="http://com.osa.mdsp.csp.ena.smms.smsmulti/V1.0" suppressJoinFailure="yes" xmlns:tns="http://com.osa.mdsp.csp.ena.smms.smsmulti/V1.0" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:nsxml0="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:nsxml1="http://com.osa.mdsp.enabler.sei/PimEnabler:DirectService/2004/V1.0">
     
     
     
     
     <partnerLinks>
          
          <partnerLink name="client" partnerLinkType="tns:SMSMulticast2" myRole="SMSMulticast2Provider"/>
          <partnerLink name="SMSEnabler" partnerLinkType="nsxml0:SMSSenderEnablerRemoteLink" partnerRole="SMSSenderEnablerRemoteProvider"/>
          <partnerLink name="PIMEnabler" partnerLinkType="nsxml1:PimDirectServiceEnablerSEIImplLink" partnerRole="PimDirectServiceEnablerSEIImplProvider"/>
     </partnerLinks>
     
     
     
     
     <variables>
          
          <variable name="smsmultiRequest" messageType="tns:SMSMulticast2RequestMessage"/>
          
          <variable name="smsmultiResponse" messageType="tns:SMSMulticast2ResponseMessage"/>
          <variable name="count" type="xsd:integer"/>
          <variable name="contactRequest" messageType="nsxml1:retrieveContactRequest"/>
          <variable name="smsRequest" messageType="nsxml0:sendSMSRequest"/>
          <variable name="smsResponse" messageType="nsxml0:sendSMSResponse"/>
          <variable name="contactResponse" messageType="nsxml1:addContactResponse"/>
     </variables>
     
     
     
     
     
     <sequence name="main">
          
          <receive name="receiveInput" partnerLink="client" portType="tns:SMSMulticast2PT" operation="process" variable="smsmultiRequest" createInstance="yes"/>
          
          <assign name="setProperties">
               <copy>
                    <from expression="5"></from>
                    <to variable="count"/>
               </copy>
               <copy>
                    <from variable="smsmultiRequest" part="parameter" query="/tns:SMSMulticast2Request/tns:inputMSISDN"></from>
                    <to variable="smsRequest" part="parameters" query="/nsxml0:sendSMS/nsxml0:sms/nsxml0:senderAddress"/>
               </copy>
               <copy>
                    <from variable="smsmultiRequest" part="parameter" query="/tns:SMSMulticast2Request/tns:inputMessage"></from>
                    <to variable="smsRequest" part="parameters" query="/nsxml0:sendSMS/nsxml0:sms/nsxml0:content"/>
               </copy>
          </assign>
          <while name="foreach" condition="bpws:getVariableData('count') > 0"><sequence><invoke name="invoke-1" partnerLink="SMSEnabler" portType="nsxml0:SMSSenderEnablerRemote" operation="sendSMS" inputVariable="smsRequest" outputVariable="smsResponse"/>
                    <assign name="decrease"><copy>
                              <from expression="bpws:getVariableData('count') - 1"></from>
                              <to variable="count"/>
                         </copy>
                    </assign>
               </sequence>
          </while>
          
          <reply name="sendResult" partnerLink="client" portType="tns:SMSMulticast2PT" operation="process" variable="smsmultiResponse"/>
     </sequence>
</process>
// Here the WSDL file: SMSSenderEnablerSEIWrapper.wsdl
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions
     name="SMSSenderEnablerSEI"
targetNamespace="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI"
     xmlns="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI"
     xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:impl="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:tns1="http://com.osa.mdsp.enabler.sei.eto/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:tns2="http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:tns4="http://com.osa.mdsp.enabler.sei.exception/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
     <xsd:schema
          elementFormDefault="qualified"
          targetNamespace="http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI"
          xmlns="http://www.w3.org/2001/XMLSchema"
          xmlns:tns="http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI">
          <xsd:complexType name="InvocationContext">
          <xsd:sequence>
          <xsd:element
          maxOccurs="unbounded"
          name="properties"
          nillable="true"
          type="xsd:string"/>
          </xsd:sequence>
          </xsd:complexType>
          <xsd:complexType name="EnablerException">
          <xsd:sequence>
          <xsd:element name="errorMessage" nillable="true" type="xsd:string"/>
          <xsd:element name="errorCode" type="xsd:int"/>
          </xsd:sequence>
          </xsd:complexType>
          <xsd:element name="EnablerException" nillable="true" type="tns:EnablerException"/>
          </xsd:schema>
<xsd:schema
elementFormDefault="qualified"
targetNamespace="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI"
xmlns="http://www.w3.org/2001/XMLSchema"
               xmlns:tns1="http://com.osa.mdsp.enabler.sei.eto/SMSEnabler/V1.0/SMSSenderSEI"
               xmlns:tns2="http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI">
<xsd:element name="sendSMS">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ctx" nillable="true" type="tns2:InvocationContext"/>
<xsd:element name="sms" nillable="true" type="tns1:SMSMessageETO"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="sendSMSReturn" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSWithNotification">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ctx" nillable="true" type="tns2:InvocationContext"/>
<xsd:element name="sms" nillable="true" type="tns1:SMSMessageETO"/>
<xsd:element name="notificationURL" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSWithNotificationResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="sendSMSWithNotificationReturn" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSToAlias">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ctx" nillable="true" type="tns2:InvocationContext"/>
<xsd:element name="sms" nillable="true" type="tns1:SMSMessageETO"/>
<xsd:element name="serviceId" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSToAliasResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="sendSMSToAliasReturn" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSWithNotificationToAlias">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ctx" nillable="true" type="tns2:InvocationContext"/>
<xsd:element name="sms" nillable="true" type="tns1:SMSMessageETO"/>
<xsd:element name="serviceId" nillable="true" type="xsd:string"/>
<xsd:element name="notificationURL" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sendSMSWithNotificationToAliasResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element
name="sendSMSWithNotificationToAliasReturn"
nillable="true"
type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<xsd:schema
elementFormDefault="qualified"
targetNamespace="http://com.osa.mdsp.enabler.sei.eto/SMSEnabler/V1.0/SMSSenderSEI"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:impl="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
               xmlns:tns1="http://com.osa.mdsp.enabler.sei.eto/SMSEnabler/V1.0/SMSSenderSEI"
               xmlns:tns2="http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI">
               <xsd:complexType name="SMSMessageETO">
<xsd:sequence>
<xsd:element name="content" nillable="true" type="xsd:string"/>
<xsd:element name="earliestDeliveryTime" nillable="true" type="xsd:dateTime"/>
<xsd:element name="expiryDate" nillable="true" type="xsd:dateTime"/>
<xsd:element name="priority" nillable="true" type="xsd:string"/>
<xsd:element name="recipient" nillable="true" type="xsd:string"/>
<xsd:element name="senderAddress" nillable="true" type="xsd:string"/>
<xsd:element name="contentSentEncoding" nillable="true" type="xsd:string"/>
<xsd:element name="smsContentSentInGsm7Bits" type="xsd:boolean"/>
<xsd:element name="smsContentSentInUcs2" type="xsd:boolean"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
<xsd:schema
elementFormDefault="qualified"
targetNamespace="http://com.osa.mdsp.enabler.sei.exception/SMSEnabler/V1.0/SMSSenderSEI"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:impl="http://com.osa.mdsp.enabler.sei/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:tns4="http://com.osa.mdsp.enabler.sei.exception/SMSEnabler/V1.0/SMSSenderSEI"
               xmlns:tns1="http://com.osa.mdsp.enabler.sei.eto/SMSEnabler/V1.0/SMSSenderSEI"
               xmlns:tns2="http://com.osa.mdsp.enabler.ecf/SMSEnabler/V1.0/SMSSenderSEI"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<xsd:complexType name="SMSException">
<xsd:sequence>
<xsd:element name="errorCode" type="xsd:int"/>
<xsd:element name="message" nillable="true" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="SMSException" nillable="true" type="tns4:SMSException"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="sendSMSRequest">
<wsdl:part element="impl:sendSMS" name="parameters"/>
</wsdl:message>
<wsdl:message name="sendSMSToAliasResponse">
<wsdl:part element="impl:sendSMSToAliasResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="EnablerException">
<wsdl:part element="tns2:EnablerException" name="fault"/>
</wsdl:message>
<wsdl:message name="sendSMSToAliasRequest">
<wsdl:part element="impl:sendSMSToAlias" name="parameters"/>
</wsdl:message>
<wsdl:message name="sendSMSWithNotificationToAliasRequest">
<wsdl:part element="impl:sendSMSWithNotificationToAlias" name="parameters"/>
</wsdl:message>
<wsdl:message name="sendSMSWithNotificationToAliasResponse">
<wsdl:part
element="impl:sendSMSWithNotificationToAliasResponse"
name="parameters"/>
</wsdl:message>
<wsdl:message name="SMSException">
<wsdl:part element="tns4:SMSException" name="fault"/>
</wsdl:message>
<wsdl:message name="sendSMSWithNotificationResponse">
<wsdl:part element="impl:sendSMSWithNotificationResponse" name="parameters"/>
</wsdl:message>
<wsdl:message name="sendSMSWithNotificationRequest">
<wsdl:part element="impl:sendSMSWithNotification" name="parameters"/>
</wsdl:message>
<wsdl:message name="sendSMSResponse">
<wsdl:part element="impl:sendSMSResponse" name="parameters"/>
</wsdl:message>
<wsdl:portType name="SMSSenderEnablerRemote">
<wsdl:operation name="sendSMS">
<wsdl:input message="impl:sendSMSRequest" name="sendSMSRequest"/>
<wsdl:output message="impl:sendSMSResponse" name="sendSMSResponse"/>
<wsdl:fault message="impl:SMSException" name="SMSException"/>
<wsdl:fault message="impl:EnablerException" name="EnablerException"/>
</wsdl:operation>
<wsdl:operation name="sendSMSWithNotification">
<wsdl:input
message="impl:sendSMSWithNotificationRequest"
name="sendSMSWithNotificationRequest"/>
<wsdl:output
message="impl:sendSMSWithNotificationResponse"
name="sendSMSWithNotificationResponse"/>
<wsdl:fault message="impl:SMSException" name="SMSException"/>
<wsdl:fault message="impl:EnablerException" name="EnablerException"/>
</wsdl:operation>
<wsdl:operation name="sendSMSToAlias">
<wsdl:input message="impl:sendSMSToAliasRequest" name="sendSMSToAliasRequest"/>
<wsdl:output
message="impl:sendSMSToAliasResponse"
name="sendSMSToAliasResponse"/>
<wsdl:fault message="impl:SMSException" name="SMSException"/>
<wsdl:fault message="impl:EnablerException" name="EnablerException"/>
</wsdl:operation>
<wsdl:operation name="sendSMSWithNotificationToAlias">
<wsdl:input
message="impl:sendSMSWithNotificationToAliasRequest"
name="sendSMSWithNotificationToAliasRequest"/>
<wsdl:output
message="impl:sendSMSWithNotificationToAliasResponse"
name="sendSMSWithNotificationToAliasResponse"/>
<wsdl:fault message="impl:SMSException" name="SMSException"/>
<wsdl:fault message="impl:EnablerException" name="EnablerException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding
name="SMSSenderEnablerRemoteSoapBinding"
type="impl:SMSSenderEnablerRemote">
<wsdlsoap:binding
style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="sendSMS">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sendSMSRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sendSMSResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="SMSException">
<wsdlsoap:fault name="SMSException" use="literal"/>
</wsdl:fault>
<wsdl:fault name="EnablerException">
<wsdlsoap:fault name="EnablerException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="sendSMSWithNotification">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sendSMSWithNotificationRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sendSMSWithNotificationResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="SMSException">
<wsdlsoap:fault name="SMSException" use="literal"/>
</wsdl:fault>
<wsdl:fault name="EnablerException">
<wsdlsoap:fault name="EnablerException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="sendSMSToAlias">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sendSMSToAliasRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sendSMSToAliasResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="SMSException">
<wsdlsoap:fault name="SMSException" use="literal"/>
</wsdl:fault>
<wsdl:fault name="EnablerException">
<wsdlsoap:fault name="EnablerException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="sendSMSWithNotificationToAlias">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="sendSMSWithNotificationToAliasRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="sendSMSWithNotificationToAliasResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="SMSException">
<wsdlsoap:fault name="SMSException" use="literal"/>
</wsdl:fault>
<wsdl:fault name="EnablerException">
<wsdlsoap:fault name="EnablerException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SMSSenderEnablerRemoteService">
<wsdl:port
binding="impl:SMSSenderEnablerRemoteSoapBinding"
name="SMSSenderEnablerRemote">
<wsdlsoap:address
location="http://localhost:8888/Simulateur/services/SMSSenderEnablerRemote?wsdl"/>
</wsdl:port>
</wsdl:service>
<plnk:partnerLinkType name="SMSSenderEnablerRemoteLink">
<plnk:role name="SMSSenderEnablerRemoteProvider">
<plnk:portType name="impl:SMSSenderEnablerRemote"/>
</plnk:role>
</plnk:partnerLinkType>
</wsdl:definitions>
Is that possible to reuse (in a BPEL file) schemas types defined in a wsdl file with Oracle PM? Could you give me a hint to solve this problem?
Many Thanks
Guillaume

You need to use the XSLT before you do assignment to achieve this, to
change the message to the correct namespace.
Please refer to sample at
"orabpel\samples\tutorials\114.XSLTTransformations" which talks about
how to use XSLT transformation.
And please refer to
"orabpel\samples\tutorials\121.FileAdapter\ComplexStructure" sample
especially "InvToPo.xslt" which talks about doing transformations
between 2 structures pointing to different namespaces.

Photos not aligning to grid when importing from digital camera,or file

I hope I am in the right place. Just starting today, when I import photos from my digital camera, or files sent in an email, they are not appearing in order, in the grid alignment. There are spaces in between the photos, they are disorderly, and I have to manually put them in alignment. I have selected "align photos to grid" in preferences, and I am at a loss as to why this is happening just now.
Any help or advice will be greatly appreciated. Thank you!
CGM

A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

Can you import from a DVD or file?

I have not yet gotten my Macbook. I haven't had any time with iMovie yet either. My question is I want to edit and re-record some home movie footage. It has either been imported to my old computer as an AVI file, or it's on a DVD recorded from a camcorder to a set top DVD recorder. I see it's easy enough to connect a firewire camcorder to a Mac and capture/edit with iMovie. But can you grab video from other sources, such as the ones I listed? Like playing back the dvd in the drive and capturing the video from the dvd in real time? Thanks.

Hi Icseds:
You will need to convert those files and the DVD into something that iMovie can import.
Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
Here are some helpful tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack Component:
http://www.apple.com/quicktime/mpeg2/
DVDxDV
http://www.dvdxdv.com/
Sue

Importing from DVD with TS files

I have iMovie '08 (7.1.4). I want to edit a new iMovie from an existing video on a DVD disc.
My problem: I cannot import the finished video from the DVD. The video will play on my computer, and the DVD player attached to my TV, but it does not import to iMovie.
If I click on the DVD disc icon, to open it on my desk top, I see two data folders: (1) Audio TS, and (2) Video TS. How can I import the finished video to iMovie for editing?
Thank you for your help.

How can I import the finished video to iMovie for editing?
Normal multiplexed MPEG2/AC3 or MPEG2/PCM files such as those found on DVDs compatible with most commercial DVD and computer media players are not edit compatible with the QT structure. Since you cannot edit it in this format, iMovie '08 will not allow you to import it. Thus, to make it edit compatible, you must convert VOB files to one of the compression formats that are compatible with iMovie '08 using an MPEG-based, third party application. My personal preference is to use the free MPEG Streamclip application from Squared 5 together with the $20 QT MPEG-2 Playback component from Apple. This combination allows you to export to all known iMovie '08 compatible audio and video compression formats which usually means you can optimize your source files for greater quality than with other work flows that restrict you to only one, two, or even three output formats. For ease of conversion the free iSquint (file level conversion) or HandBrake (DVD level conversion) are more handy but limit you to MPEG4/AAC or H.264/AAC compression formats which produce smaller files but less quality than DV or AIC compression. Other options include FFmpefX (donation-ware), Visual Hub (pay-ware), MPEG2 Works (pay-ware), etc. to name just a few.

Audio popping between clips with timeline imported from final cut xml file

So i imported a final cut timeline that was synced with pluraleyes into adobe and between all the cuts there is an audible popping noise. I've tried using audio cross fade but it seems to make it worse. How can I fix this??

If anyone else has this problem - you fix it by making sure you pan the audio to the center, not left or right.

Pages Importing from pages file to another pages file

Is it possible to Import from a separate pages file to another pages file
IF so HOW?????

Tulse, I'm using Pages 2 too. The first thing I'd tried this on had only a simple drop cap in a text box, fixed on page. That didn't copy - or at any rate didn't paste. The text box had been sent back to overlay it with inline spaces to clear the capital. These reproduced, but the capital didn't. Neither did kerning or baseline adjustments, nor my inserted guides for "leading" the text to the same depth on every page
Also page set-up details were not transferred in this way: i.e., if you change the margins in a template (even the blank one) the margins don't transfer. Logical enough, page set-up belongs to the document, not the section.
Looking at this again, in the Extreme Newsletter template, imported graphics transferred, and inserted text transferred, but layering and placement information did not. I'd made my own pages by altering this, generally using text boxes or shapes to compose picture pages rather than using those in the template. But the copied and pasted sections were all over the place.
So it may be the case that if you're copying from a section to a document with identical layout, page set-up & etc. to the one you're copying from, the result will contain most of the content. But the layering, placement on page of fixed objects, etc., would seem to be decidedly iffy.
I've tried it on title page sections, where the info in fixed text boxes copied, but neither their placement nor relative placement, and (in the newsletter template) with both my own and the provided sections, with no consistent results. If it works in some cases, then that would be handy.
It's easy enough to try, and undo if it doesn't work.
But it's certainly no subsitute for being able to insert one Pages document into another; nor even always bits of it. I'd be inclined to conclude that copying and pasting in this way uses something less than the full Pages file format.
Cheers.
iBook G4 Mac OS X (10.4.7)

Command to import from compressed file

Can someone please tell me the command to import from a compressed dump file using fromuser and touser.
Thanks in Advance

See if the following thread helps you out.
exp/imp

Importing Word, Excel, and Powerpoint...

Can you import Word, Excel, and Powerpoint files into Pages, Numbers, and Keynote so that they can all be backed up on iCloud?
Will people with PCs and/or Office files still be able to read them?

JFraser wrote:
Can you import Word, Excel, and Powerpoint files into Pages, Numbers, and Keynote so that they can all be backed up on iCloud?
Will people with PCs and/or Office files still be able to read them?
Yes they are all easily imported into Pages, Number & Keynote and those apps will also export to their MS Office equivilants. However if you are sharing the documents regularly with Windows users it would be much easier to just get MS Office for Mac 2011. Then sharing documents is a much easier process.

Import from 20 MB powerpoint file yields gigantic 1.4 GB file!

Similar Messages

Maybe you are looking for