Import from Canon 5D Mark 111 to FCP 7

I have footage from Canon 5D that I compressed and have in a Pro Res sequence. FCP 7  When I export, do I uncompress the footage.  Any tutorials on this workflow?

Shot this footage a year ago on rented Canon.  I used compressor and chose apple pro res 422 for progressive  material.
It will output to BluRay so Self contained Qt is the way to go.
Although...how did you compress the footage, and what did you compress it to? Did I do the right thing, Canon is progressive footage yes.
Thanks Shane.

Similar Messages

  • Lightroom 4.2 will not import from Canon 5D Mark III

    When trying to import photos from my Canon 5D Mark III into Lightroom 4.2, the import usually freezes up at some arbitrary point.  It will either crash lightroom altogether, or it will have a message saying "could not import all files, files could not be read."  (something along those lines.)
    I am using a 1 year old iMac with a 1 TB HD.  I import directly onto that hard drive.  Lightroom has never had an issue importing.  My previous camera was a Canon EOS T1i.  The problems started when I purchased my 5D Mark III.  Images from my T1i, in fact, still import fine with no issues.  I am running OS X version 10.7.5.  My compact flash card is brand new, a Lexar 1000x.  This question/issue may have been answered elsewhere, and if so I apologize, for i could not locate it.  I have seen some suggesting it may be a hard drive issue, however, the evidence points to the 5D Mark III not playing well with LR 4.2.  (T1i images still import fine.)

    Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
    http://forums.adobe.com/message/4882852#4882852
    SUGGESTION:
    Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
    If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

  • Does not import from Canon 7D Mark II?

    Is there an update to Elements 12.2 that will allow importing pictures from a Canon 7D Mark II?

    Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
    http://forums.adobe.com/message/4882852#4882852
    SUGGESTION:
    Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
    If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.

  • Lightroom (4.3) won't recognize the file type while importing from Canon 5d Mark iii

    Anyone mind helping me trouble shoot why my Lightroom (4.3) won't recognize the file type of my Canon 5D Mark iii ?
    I have seen this in a couple other threads but none of those suggestions worked for me. I am also a Mac user.

    Bomal9 wrote:
    I have Lightroom 4.3 and a Mark iii and cannot import raw files into Lightroom.
    The above contradicts with this:
    Bomal9 wrote:
    I am downloading images through the Canon EOS Utility manager and have to import the photos in a folder into Lightroom.
    So my reading of that is that you ARE importing Raw files from the 5D3 into Lightroom, but having to use a roundabout route to do so. Is that correct? If so, how are you trying to import when you "cannot import raw files into Lightroom", are you using a card reader or direct camera attachment? Have you tried both methods? And what happens when you do try?

  • How do I capture video from canon d5 mark II to fcp using usb connection

    I have always imported video to fcp via firewire using my tape cameras but soon I will have to make the jump to non linear cameras eventually as tape becomes obsolete. I haven't got a non linear camera but would like to know if there's a simple way to upload video footage with a camera like the 5d or similar non linear video cameras. Also, I'd like to know if it is possible to select the in and out points before importing like you do with tape devices so that you don't have to download all the footage shot. Thanks for any advice.

    Attach camera via USB or put card in card reader.
    Go to FCP, and go to the Log and TRANSFER window.
    If FCP recognizes the card, you will see your clips listed on the left.
    You can view them, set Ins and Outs, and import just what you want.
    Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

  • Images from Canon 7D mark 2 will not open in Photoshop CS6

    Images from Canon 7D mark 2 will not open in Photoshop CS6

    Hi Ferdinand12345,
    Cannon 7D mark II has been included in the ACR 8.7. I would advise you to wait for the 8.7 camera raw to release.
    In the meanwhile you can go to labs.adobe.com and download the 8.7 DNG converter and convert the files to DNG and then try to import.
    Thanks

  • I have CS6 10.0.6 x64 extended on  Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

    I have CS6 10.0.6 x64 extended on  Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

    If you go to Photoshop>About Plug-in and click on the words Camera Raw, what version does it list?
    I suspect you still have Camera Raw 7.0
    When you go to Help>Updates from within photoshop cs6, it says nothing available?

  • Can't open raw files in cs5.  When I try to download updates I keep getting download errors ?  I have a canon 5D mark 111 ?

    I am currently running CS5, on windows.  I can't open any raw format files in photoshop (I took some photos with a canon 5D mark 111).  I went to updates tab to try to update cs5, but I keep getting download errors and am unable to update.  Any ideas on how to fix this ?  Trying to edit some wedding photo's I took.

    If this is a Photoshop question please post in the Photoshop forum.

  • Lightroom 4.  dose not handle RAW files from canon 5D MK 111.

    I have purchased lightroom 4. It dose not handle RAW files from canon 5D MK 111.
    I have downloaded and ran the suggested file from Adobe, but still no luck.
    Anyone have the answer?

    The initial release of Lightroom 4 doesn't handle the 5d mk 3 files because of when the camera was released.  You can either wait for the 4.1 release, or you can download the 4.1 Release Candidate 2 at http://labs.adobe.com/technologies/lightroom4-1/.
    Technically you can also download Adobe's DNG converter, but that just adds another program to the situation.

  • Importing From Canon Vixia HF M30 to Final Cut Pro

    Hey there, I have been trying to import to final cut with some success. Importing From Canon Vixia HF M30 from my sd card.
    I used the easy setup.
    FORMAT HD
    USE HDV APPLE INTERMEDIATE CODEC 1080I60
    I go to log and transfer select the clips I need and click add to que.
    So perfect there are my clips in my bin, I bring them to my timeline and a green line appears above my video, uugggggh. I know this is a rendering issue but why.
    Please help does anyone know why this is happening.
    This is very frustrating, I have been trying to read the other discussions I didn't see anything on it let alone the info on the net, trying different things just not working for me.
    Thanks Gang

    Your camera records AVCHD. Convert to prores 422 or prores 422(LT) on log and transfer and make sure your sequence matchs your footage.

  • Can't import from Sony XDCAM memory card to FCP 6

    I can't import from Sony XDCAM memory card to FCP 6.01 HD. Am using Macbook Pro, 2 gig of RAM. This is my first time NOT using tape. I can copy the files off the memory card onto an external drive (to free up the card for pro crew's next day's shoot), but can't import either to FCP. Do I need to convert the files in some way before FCP can read them? Need to fix this problem fast as the crew are off to Nepal for 2 week shoot.

    Laura,
    First, I'm assuming that you're referring to the XDCAM EX. You'll need to install the FCP 6.0.2 upgrade, which contains the XDCAM EX codecs.
    Second, You'll need to install the PDZK-P1 Transfer Application, and use that to import your EX clips into FCP. I just noticed that there is a new version available, 2.5.1 which is labeled specifically for Tiger/Leopard. I haven't tested this version yet, and will report back on any stability issues. We're currently running version 2.1.1, without many issues.

  • HT3825 How to view RAW from Canon 5D mark III for OS 10.6

    To 'Preview' RAW files from Canon 5D mark III, it is known that you need to install the Digital Camera RAW Compatibility Update 3.12 , but it can only be used with iphoto 9, which in turn only work in OS 10.7, so there is no way for 10.6 users to 'Preview' the RAW files? Please help if you no any other ways, thank you!

    Which Adobe program?
    Which version?

  • What camera raw download do I need for photoshop CS6 and a canon 5D mark 111 on a Mac 10.8.5 computer?

    What camera raw download do I need for Photoshop CS6 with a Canon 5D mark 111 on a Mac 10.8.5 computer

    Got it to work.
    Thanks so much for your help.
    On Sun, Aug 17, 2014 at 2:36 PM, John Waller <[email protected]>

  • Why won't Aperture 2 support RAW files imported from Canon 60D when it does from my Olympus DSLR?

    Why won't Aperture 2 support RAW files imported from Canon 60D when it does from my Olympus DSLR?

    I'm afriad the fact that your Olympus dSLR is supported is no relevance.
    The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
    Support for individual camera models has to be added one by one, and Apple will update the OS to work with the most recent version of the software. That's an incentive for you to keep up-to-date. So, for support for your 60D you'll need 10.6.5 plus Aperture 3 and/or iPhoto 11.
    Regards
    TD

  • Running LR 5.6 on OSX 10.9.4.  Can't import from Canon 7D. Any ideas?

    Running LR 5.6 on OSX 10.9.4.  Can't import from Canon 7D. Any ideas?

    For future reference, if there is an error message, you should probably quote it in your original message on the subject.
    "Could not be read" indicates that you do not have WRITE permission to the destination directory when you try to import, so change your permissions.
    "not recognized" might indicate the camera card itself is corrupted or the card reader is failing ... or the problem might go away if you change your permissions.

Maybe you are looking for