Import from databuffer in a failsave way?

hi,
i ask a litte time before how to to serialize a data object to an xstring.
i got the hint to do this with import/export to databuffer and it works perfect.
but now i got the problem that the structure in witch i would like to import the data
slightly differ to the output structure.
in this case i loose all the data and i have no chance to reimport parts of it.
maybe there is a function available that store and import the data in a more failsave way ( including the structure kind of the data ).
something that would import in the same way as copy data with move-corresponding.
[edit]
maybe i can do it from an other side.
is it possible to serialize a cl_abap_datadescr object in and xstring?
in this case i would be able to store the structure information by myself.
[/edit]
thx for any help.
mfg grafl ronald
Message was edited by:
Grafl Ronald

did it by myself

Similar Messages

Is there any way to Import From Camera (dv) in a way that Final Cut Pro can later import everything, including the audio

I know iMovie dv to Final Cut Pro has no audio. At least with my old events. But is there any way I can make it so future dv files Imported From Camera in iMove 2011 will later work in FCP?

Hi
Yes and No
And it depend's on what quality You want and how much problem You stand in FC - and what version of FinalCut You mean.
• FinalCut Pro-X - I have no clue at all
• FinalCut Express and Pro (till 6.0.6) - I'm very familiar to.
• If You take out the Imported/Captured material from Event's - it seems to be 100% OK - but in wrong codec so it will work in FinalCut BUT with a lot of RENDERINGS - every slight change = Need of RENDERING. To much for me.
• If You aim to do some Editing in iMovie them move over to FinalCut = Moving from Event's to Project's result in that every second line in the picture is discarded ( and can not be repaired ) so the project will lose a lot of quality - whatever way You use to Export/Move it over to FinalCut.
So at least I'm better of by Capture in FinalCut from Start as I can keep 100% quality till Movie is done.
Yours Bengt W

IPhoto import from iPod Touch disappeared, any way to recover?

I imported photos from our 5 gen iPod Touch into iPhoto, and, as it was getting pretty full, selected the delete photos after import option. iPhoto crashed during the delete. We reopened it and there are no photos imported, but iPhoto did manage to delete about half of our iPod's photos before crashing. I would hope that iPhoto wouldn't be deleting photos off my iPod until it had actually imported the files...but they are no where to be found. Any ideas?
My OS is Mavericks, and we have iPhoto '09, version 8.1.2. I've tried rebuilding the iPhoto library, but it makes no difference.

Like I said I have my ipod set to sync manually and even with that setting it is still showing some "itunes purchased" albums on my ipod album list. They are not synced though because when you go to play them it shows them as not downloaded.

When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

When I try to print a drawing imported from my ipad iphoto crops it. Is there any way to stop this?

Usual cause: printing at the wrong aspect ratio for the image - trying to print 5 x 3 in the shape of a 6 x 4 for instance.
Regards
TD

Is there an easy way to use MOVE when importing from card reader?

In Lightroom 1, I would hit File -> Import From Disk which would allow me to move photos from my card reader to the hard drive.
In Lightroom 3, the only option is the normal import dialog and in order to get the "Move" option I have to select "other source" and then scroll down the list to select the card reader in order to get the "Move" option. It's a pain to do it every time. (not to mention my wife will never do it and just use "copy").
So my question is, "Is there a way to get the Move option to be available by default on my card reader?"
It's been my workflow since 2004 to have the images deleted directly after I copy them off the memory card using Adobe software (Photoshop Album 2.0, Photoshop Elements 4, Lightroom 1.0). I'm really hoping there is an easy way to accomplish this in Lightroom 3. Otherwise I will be pretty disappointed.

function(){return A.apply(null,[this].concat($A(arguments)))}
brianbjork wrote:
The reason I like the move command so much is that I know when photos are on my memory cards that the are not on my computer.
LR defaults to not importing suspected duplicates. so if there are still files on the card, they will be grayed out. That's how you can know.
function(){return A.apply(null,[this].concat($A(arguments)))}
brianbjork wrote:
What do you all use in your work flow to delete the pictures left on your memory cards after they are copied?
I have a shell file that removes the files from the card and ejects the disk. I keep it in my dock for easy access.
Others will tell yiou, though, to format in camera. Which is a good idea! I just like to keep my cards empty and ready.

Any way to import from another drive and leave clips in place?

Hi
Is there any way to import from other drives where you can leave your media in place?
Whenever I've imported clips from another drive I had to copy them to the library, while clips on the same drive as the library I could leave in place. Besides getting a bit tired of FCP treating like a kid with Alzheimer's, what would one do, say, when a drive gets full? I could see big projects needing more than a single drive.
best
elmer

LIke Russ said, the copy of the entire folder structure is similar to creating a camera archive. This copy or archive is treated just as if it were a camera card - in particular, "leave in place" is not available, and you have the option go import just parts of clips if you want.
so technicay even though they reside in a hard drive this is like importing from camera, as opposed to "import from file".
I Will try to describe how I handle my media. I hope this will help clarify things a bit. I am not saying thus is the way to do things, but it is my way.
I keep archives of the camera cards, which I then erase and reuse.
I import clips from my camera archives which I store as external media (copying to a folder of my choosing instead of into the library). These movie files, plus other files that I get from other sources, can be later imported and used in other libraries using "leave in place".
And all of this of course needs to be regularly backed up.

Best way to import from iPhoto 6 with albums ?

Hello All !
I have a large collection of photos (well, only about 5500 pics) in my old iPhoto 6 library sitting on my (also) old Mac Book Pro from 3 or 4 years ago, and today I would like to import all that to my (new) iPhoto 09 on my iMac.
What's the best way to do that and keeping the albums and folders I have in my old library ?
. will the standard import function just do the trick and automagically recognize the old iPhoto on the network (just like iTunes does with shared music) ?
. should I use the import function, navigate through the shared folders and import from the "iPhoto Library" folder on the laptop ? Will this sort through the originals and modified pics and get the albums too ?
. or should I export everything from the old iPhoto to reimport them in the new one (using the original file option) ? Will that keep the albums ?
Thanks for your help,
Paul-Henri

None of the above.
There's no importing involved. All you do is open the v6 Library with 09. It will then update the Library, preserving all your work. As always, back up first.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

Best way to import from iTunes & audio lock to video?

I just started with PrE 10 and am coming from years with iMovie HD6 (never liked the later versions). Can audio tracks be dragged from iTunes (by having 2 minimal sized windows of each application open) into the Project area? Or do you need to try and find each song by going through the whole Get Media File/Folder link process? I've tried dragging a few songs from iTunes, and it didn't seem to work (it was very easy in iMovie). I was able to add photos to the Project area from iPhoto by dragging them over from the iPhoto window.
Also, is there a way to lock (or link) the beginning of an added audio/soundtrack clip to a video clip, so that it does not inadvertently get moved, or so that if you move the video clip, or delete an earlier video clip, the locked audio goes with that video clip?
[Moved to the Premiere Elements main forum]

With Audio, you need to Import the file (Get Media), as Premiere needs to Conform the Audio, creating both a CFA (Conformed Audio) file, and a PEK (Waveform Display) file, and link to those.
Now, with iTunes, there can be some problems, though things have gotten a bit better recently. If you DO have an issue, you can create a Playlist in iTunes, and copy over all the files that you need for your Project, then burn a CD of that Playlist. The Audio-CD will be in the CDA container in as a WAV file, which should Import just fine, into PrE.
Actually, it might be easier, even if the iTunes music does Import, to create a Playlist in iTunes, where you can drag and drop right from the iTunes GUI, and then Import from that Playlist.
Good luck,
Hunt
Message was edited by: Bill Hunt - Added link to Conforming Audio Article

Is there a way to use import from camera with a cannon 7d CF card so that you can select only the parts of the clips that you want?

I used to use log and transfer and now in final cut x I know you are supposed to use import file, however you have to import the entire clip instead of being able to select an in and an out point of the footage being imported. This is not good for me because I have a limited amount of space and if I'm going to be converting everything to prores and only using 65% of the footage that is a huge waste. Any help or work arounds would be appreciated. Thanks!

I import from P2 and 7D cards daily, it's super easy, very fast, very simple, not so complicated.
Here's how you do it.
1- CF card in a card reader, mount on Desktop, or copy whole card contents to a folder. (P2 can read directly from inside cam)
2- Open "Import From Camera" in FCP X.
3- Click "Open Archive" button.
4- Point to CF card.
* FCP X will act like L&T now.
* Select a Range of a clip you want to import, click import button.
* Select a different Range of same clip, click import button.
* If you want whole clips, highlight one or more whole clips, import.
* Imports are ProRes 422 files.
* If you want a backup of the CF or P2 card "as is", click the Create Archive button.
Very simple, no need for thrid party BS. It's really simple and easy.
Canon DSLR's have never been able to mount the cards while inside the camera. You have always needed a card reader.

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

IPhone won't play music imported from CDs or mp3s not downloaded from itunes

When I first downloaded iOS 7, all of the music I had in my iTunes synched to my iPhone, but now new CDs I just imported and previous songs I imported from CDs won't synch (I've tried over wifi and usb). When I click on songs on my phone that were from CDs, they look as if they are going to play and then skip immediately. Mp3s I downloaded do the same thing. Mind you, everything was working fine until updating to iOS 7.0.4. I've been looking around the forums and have found that problems like this are relatively common and it's a shame Apple hasn't done anything to fix it.
When my phone is hooked up and I click on "on this iPhone", it says the music from CDs and mp3s is on, but the titles come up gray with these litte circle things next to them
Just checking now, I noticed some songs I bought from iTunes are doing the same thing.
I tried manually synching, but when I click to drag the songs into my phone, the section that has music, movies, etc. just flashes and nothing happens. I know something is wrong because I just put a ringtone onto my phone the same way.
Oh, I also noticed that when my iPhone is synching and the steps go through at the top it skips steps 3, 4, and sometimes 5 (The Apple symbol pops up instead then goes straight to 6 and 7) so I know it's not recognizing the fact I put a bunch of new music in iTunes. Also, when I look at the bar at the bottom that shows how much memory is on my phone, this shows up:
and that Documents and Data thing was not there before.
Can someone please give me ideas on how I can stop this rediculousness without buying a new phone?

Did you already try the suggestions mentioned in this article?
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

How to find out what was imported from a dump file

Hi.
I got the dump file from a group and they told me to import it. Import job went successfully without errors as following:
Import: Release 9.2.0.6.0 - Production on Mon Oct 16 20:53:12 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by OPS$ORACLETS, not by you
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing OPS$ORACLETS's objects into SYS
. importing BDS_APP's objects into BDS_APP
Import terminated successfully without warnings.
How do i find out what was imported from a dump file?

another way would be to just list the contents of the dump file
imp user/pass file=dumpfile show=Y

How to create package and import from jar file?

Hi all,
I am writing a software and I am not sure how to create a package for the classes.
Say I have two classes in the same directory as follows:
testA.java
==========
package AB;
public class testA
public static void main(String[] args){
     testB myB = new testB();
     System.out.println("A test");
testB.java
===========
package AB;
public class testB
public testB(){
     System.out.println("B constructor");
both file compile without the package heading;
both file compile using: javac -classpath .\ *.java
Question 1:
I cannot run testA by: java -classpath .\ testA
I think it is a syntax error. What is the correct one?
If I run testA by: java testA
The only output I get is: A test
But I am expecting: B constructor /n A test
What went wrong?
Question 2:
I need to use APIs of another software. I have downloaded a .jar file (xxx.jar) with all the classes in it. And I have put "import xxx.*;" in my source file. But the compiler complains about the importing. What is the right way to copmile it?
I have read a couple of tutorials but they don't answer my question.
(I am using windows2000 and don't have the classpath variable.)
Hope some one can help.
Thanks a lot

Try moving testA out of the package and importing 'AB.*;'
If you have:
./testA.class
./AB/testb.class
Then to execute testA from ./ type: java -cp . testA

How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

Hi All,
Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options. The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
Thanks in advance,
Phil in San Diego

Phil,
PhilipCWells wrote:
I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed. The link is:
http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
One of them should help you with this.
Jeff (in San Diego as well)

Lightroom 5.5 Import from Catalog *very* slow performance.

Importing from a second catalog from a shoot is *very* slow with the last version or couple of versions of Lightroom. It's been about 20 minutes and the import is moving glacially slow and is only about 20% done.
Here are as many stats as I have:
iMac 27" 3.5Ghz Core i7, 32G of ram, 3T fusion drive (the late 2013 model maxed out)
Master catalog has 117,000 images in it.
The catalog I'm importing has 948 images in it.
CPU use during the import is 100% used by lightroom (note that the multiple CPUs can go to more than 100% so this means I think that one CPU is maxed out, though LR can sometimes take 500% of my CPUs during an export)
Lightroom is using 4.2G of RAM (10G free in activity monitor)
Hard drive is fairly full, but still has 366G free on it (so about 10%)
Lightroom Mobile sync is enabled (not on this folder I don't think) but says "service unavailable" at this point.
Lightroom is fully up to date (5.5) on both iMac and laptop (also a mac in case that matters). Both are up to date with the latest OS software.
How I did it was:
Export the shoot as a new catalog on my iMac
Transfer it to my laptop (smart previews only, no masters)
Edit images, metadata, etc
Transfer the entire folder back (.lrcat, previews, smart previews) to iMac
In my master catalog do an import from catalog
Waited for ages for checking for dupes (which I can understand with such a big catalog)
Selected to import all, changing metadata and develop edits, and selecting to put new images in the folder (not sure why it asked as there weren't any new images)
The last time I did an import I started it and then went out somewhere so I didn't notice how long it took, but this seems completely crazy. In the time it's taken to write this up it's now about 20 minutes later and the progress bar is maybe at the 33% range. It's still working away, it's just crazy crazy slow.
Anything to help out or debug would be greatly appreciated. I suspect it's pure size of the catalog, but 120k isn't outside the realm of what I've heard people say works fine, or maybe the Fusion drive (maybe the OS is trying to move files around behind the scenes)?
Either way this didn't seem to be an issue until the last couple of versions (I haven't gone and re-installed 5.4 or 5.3 to check) and it's starting to really frustrate me

Hi Jim,
Great suggestion! It opens perfectly fine on its own. I even went as far as re-exporting it once it loaded but am still experiencing the same issue. That same catalog loads perfectly fine on my assistant's iMac.
I can't really think about anything that changed in my environment with the exception of a new Bootcamp partition to run windows on an external Thunderbolt HD but I doubt this is related.
I'm open to any suggestions while I am trying this again... 10 minutes of 'Checking for changed and duplicate photos'.

Import from databuffer in a failsave way?

Similar Messages

Maybe you are looking for