Import from HD folder with NEF and JPEG files-Can't see JPEG files

I am using Aperture 2 and I am trying to import from an external HD folder of images, with both NEF and JPEG files of the same photo. Using the import function, the import pane only shows the NEF file, not the JPEG file. Is there a setting somewhere that will allow me to see the JPEG file also, so I can import only the JPEG. (note: if I move the JPEG to a different folder away from the NEF file, then the JPEG appears and I can import it.)
PS I am importing only the JPEG because I have a Nikon D60, which is still un-supported.

You could import both, select all images afterwards, select 'Create version from master jpeg'(alt-J), unstack all (shift-cmd-K while everything is still selected), sort by file size to separate the raws from the jpegs, and delete the raws.
Or run the raws through Adobe's DNG converter (which in its newest version, 4.4, supports the D60) and use the DNG baseline support until Apple (or rather Aperture) supports the D60.

Similar Messages

IMac woke up by itself with clicking pattern. Folder with ? mark now. Can't see HD in Diagnostics. Dead HD?

Hi,
My iMac was asleep all night, but it woke up suddenly by doing a 6-click pattern. 6 clicks, then the sound of something whirling/winding down, silence, then 6 clicks again, sound of something whirling down, repeat.
Last month I suddenly heard my iMac making weird clicks whenever it woke up from sleep. I posted about the problem here. It would take longer than usual to fully wake up, and as it was doing so it'd make lots of clicking sounds before I could use it. Did Diagnostics; Repair Disk said my HD was fine.
I think the problem stems from someone borrowing my computer and using up lots of RAM (tons of programs open), which of course slowed down the computer, so his solution was to just hold down the power button to restart (found out he was too impatient to restart the computer the right way ). I don't know how many times he did it, but I guess 10 times total? Is this enough to mess up the HD?
One day the iMac showed the folder with a question mark on it. I put in my Snow Leopard install disc and ran the OS from it. I went into System Preferences and redirected the computer to start up from the HD (it had been blank, for some reason). Then it rebooted from the HD like normal. I started using the iMac again, and the clicking problem became only intermittent. Eventually the clicking went away altogether, so I continued using the computer, hoping the HD was still all right (wishful thinking). I did make disk copies using Carbon Copy in case I was wrong (I also let Time Machine do its thing every single day).
Today I woke up to the sound of my iMac clicking because it woke up on its own. Again, it was having the old trouble of waking like it did last month. 6 clicks. Wind down. Silence. Repeat. It gave me the grey screen for a few long minutes, then it gave me the folder with the question mark on it. I tried to boot from my Snow Leopard disk, but when I tried to re-direct the boot drive, there was no option for my hard drive at all like last time (just the CD and the network server). I tried entering Diagnostics, but again in the left pane there was NO option for my hard drive like last time, only the CD-ROM with the Snow Leopard CD in it.
Does that basically mean my HD is dead since I can't "see" it? Should I even bother taking it in to Genius? I'm probably going to be buying a new iMac tomorrow. I just hope my Time Machine and Carbon Copy backups will transfer all my files correctly. I've never had to do this before, so I'm pretty nervous about it.
Thanks!
P.S. My iMac is probably 4-5 years old. Purchased refurbished from a non-Apple store. I guess it's just time?

I put the HD back into my iMac's SATA sled and can view the contents of the drive without a problem, once again. The Disk Utility on the iMac indicates that the S.M.A.R.T. Status for the drive is "Not Supported," but that is probably because it is viewing the drive via USB from the sled.
If the drive was failing would I really be able to access it from my iMac via the SATA sled so easily?
At this point I am leaning on taking the whole MBPro, drive and all, into the Genius Bar tomorrow and hopefully getting back a working computer within a week.

Problem with role and user; user can't see the table

Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
Sebastian

user2019788 wrote:
Hello forum,
I've created a role:
CREATE ROLE enr_service;
GRANT CONNECT TO enr_service;
GRANT ALL ON Locataires TO enr_service;
GRANT ALL ON Batiments TO enr_service;
GRANT ALL ON Sportifs TO enr_service;
GRANT SELECT ON Epreuves TO enr_service;
and also a user:
CREATE USER ENR1 IDENTIFIED BY password QUOTA UNLIMITED ON USERS;
GRANT enr_service TO ENR1;
ALTER USER ENR1 DEFAULT ROLE enr_service;
ALTER USER ENR1 DEFAULT TABLESPACE USERS;
I can connect to the database with this user but when I try to query a table he's been granted access to I get an error message:
SELECT * FROM Sportifs;
ORA-00942: table or view does not exists
I can't see what I've done wrong. Any help is appreciated.
SebastianThat's probably because ENR1 doesn't have any table named SPORTIFS and he didn't qualify the table name with the schema name ...

Replace old router with WRT110 and now I can not see shared printer on network

Replaced a BEFW11S4 with a WRT110. Now I can not see a shared printer on the network any more. I have not changed anything on the computer that has the printer shared. I can see the internet on all the computers, but not the shared printer. can you help?

First which you need to check, is your printer is working Offline on your computer. In this case you need to Re-map your Printer on your Computers back again. First check if you have any Firewall or Antivurs Installed on your computer try to disable it and check if you are able to print from your computer. If not then try to Remap the printer on your computer.
Go to Network connections window and if you are able to see your computer name on which the printer is installed, then right click on the Printer and click on "Connect" or "MAP" once done you will be able to print from your computer.
Note down the IP address of the Computer on which you have Installed the Printer. (Click on Start - Run - CMD and click Ok, now in the command prompt type "ipconfig" and note down the Ip address, Then go to your other computer and Click on Start - Run - CMD and click Ok and now in the Command prompt type "ping (IP address of your main computer) and hit enter and check if you are getting any replies. If yes, then again click on "Start - Run - type ( \\ip address of your main computer) and click Ok, and now you will be able to see your printer name then right click on it and click on "Connect" or Map, once done, now check if you are able to print from your computer.

I upgraded to Yosemite and now I can't see ProRes files

Final Cut Pro 7, FCP X, QuickTime, etc. no longer see prores movies after installing Yosemite. Anyone else experiencing this?
I have reinstalled the standalone codec pack to no avail. Install of FCP X did not help either.
JimmyG

Does that happen in both FCP 7 and FCP X (no longer see prores movies after installing Yosemite)?

I hid a folder with terminal and now I can't get it back.

Hey guys,
I used this
chflags hidden /Users//craigsequeira/Desktop/School Work
in terminal to hide my "School Work" folder and now I don't know how to get it back!
Could you guys help me out cause there is a lot of data in there!

This will bring it back:
chflags nohidden /Users/craigsequeira/Desktop/School\ Work
To enable hidden folders/files visibility
defaults write com.apple.finder AppleShowAllFiles -bool true ; killall Finder
To reverse:
defaults write com.apple.finder AppleShowAllFiles -bool false ; killall Finder

Problems with JFileChooser and Windows 2000 (can't see mydocuments contents

Hi! I've an applet which has a JFileChooser component. In other Windows, I can select the MyDocuments folder and it goes there and list all the contents OK. But, in Windows 2000, when I go to MyDocuments, none of the contents is listed in the file chooser. I need to navigate through all the directories to get there (C:\documents and settings\user\my documents) and then, it shows its contents, but obviously, I don't want it to be this way because is difficult for the common user.
Any idea of why is going on this?
Thanks in advance!

Hello, You need to use something like o=isp as the
root DN, then o=yourorg.com goes beneath it.
i.e.
For the other questions on setup, just choose o=isp
as base DN when you set up the directory server. When
you run ims_dssetup.pl, choose o=internet as the DC
tree base, then choose o=isp as the user/groups base
suffix.
When you are installing messaging server it will ask
where to put the default organization, this is where
you would choose o=abc.com, o=isp
For more info on how this structure works please take
a look at this link and it will all fit into place:
http://docs.sun.com/source/816-6017-10/changes.htm#170
8Alright, I got ims_dssetup to run successfully. But now when the ims 5.2 installation is about 50% done, I get the message:
A serious problem occurred while installing the iPlanet Messaging Server Messaging SIE entry in LDAP (msg.cfgldap.sie.inf). It reported the following problem:
The server configuration for the Messaging SIE entry in LDAP (msg.cfgldap.sie.inf) cannot be created.

PSE12 Organizer - can you copy photo from one folder to another and import copy into Organizer and still have original in other folder

I have been using folders to organize all my pictures and I will copy photos from folder to folder, often having them in 2 or 3 folders based on use. I tried to copy a photo in Organizer PSE12 from one folder to another and you can only move it, that means I can only have one copy of the photo. That is fine if I am using tags and want to search for it, but I want to have mult copies in mult folders. Organizer will recognize that it is there but it won't import it into the new folder. Until I move it, it stays in the original folder. I can drag it out of Organizer and drop (copy) it into a new folder fine, but it won't show in organizer in the new folder. Is there any way to copy and have multiple copies show up in multiple folders?

Hi,
The organizer works on the principle of not having multiple copies of the same photo.
If you have multiple copies spread in different folders, then making changes to one doesn't affect the others. The use of tags and albums are there to give different views of your photos.
You can't have multiple copies with exactly the same name even if they are in different folders. You could select a photo and duplicate it (File -> Duplicate) and then move the copy into a different folder but the name will be different.
If you want different folders for a specific reason, it is possible to use albums to collect the group of photos and then export them to a new folder outside of the organizer. You can also rename on export which is useful if you want to arrange the photos in a specific order.
Hope that helps a bit.
Brian

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

Firefox can't read any Bookmark that was imported from my PC with file extension .url. Safari reads them fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox

Firefox can't read any Bookmark on my Mac that was imported from my PC with file extension .url. Safari reads them all fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox
== URL of affected sites ==
http://anysite.url
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hello JF.
I don't think that extension is supported. I believe Firefox can only read .json and .html.
You may want to read this though:
[http://support.mozilla.com/en-US/kb/Importing+bookmarks+and other data from Safari Importing bookmarks and other data from Safari]

Suppose you create an album of photos imported from your iPhone with roll, then delete those photos on the roll ... because they were also deleted on the album?

suppose you create an album of photos imported from your iPhone with roll, then delete those photos on the roll ... because they were also deleted on the album?

If you create an album directly on the phone, then if you delete the photo from its original album then it will also be deleted from all albums that you've copied it into; if you just remove it from the newly created album then it will just be deleted from that album, it will still be in its original album and any other albums that you've copied it into.

How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?

How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?
I have hundreds of pictures and I want to delete completely the imported files.
Thanks

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

Import from HD folder with NEF and JPEG files-Can't see JPEG files

Similar Messages

Maybe you are looking for