Import from higher to lower version is possible ?

Hi,
One of my production database is in 10.2.0.3 version and development is in 10.2.0.1 version?
I need to refresh dev database from prod. Export/import is possible in this scenario ?
Thanks,
Dasarath

Cj wrote:
Export/import is possible in this scenario ?
Yes. Its possible.
Use 9i exp/imp to do this.
ThanksWhy 9i ? :-) I believe this is misleading info :-)
You will need to use the lower database version executables (in this case 10.2.0.1) to perform the export and import.
How to Import to lower version database or run network export with exp/imp utilities          (Doc ID 1065604.1)
Compatibility Matrix for Export And Import Between Different Oracle Versions [Video]          (Doc ID 132904.1)
HTH
Srini

Similar Messages

  • Importing from higher to lower version of oracle database

    I have taken user backup from Oracle 9i database.
    Now I want to import that user into Oracle 8i database.
    Is there any method to do this?

    Always use a version of the EXPORT utility that is equal to the lowest version of either the source or the target database.
    I suggest you to read this:
    Compatibility Matrix for Export & Import Between Different Oracle Versions
         Doc ID:      Note:132904.1      
    ~ Madrid

  • Acrobat - Conversion from higher to lower version - Problem & Bizhubs printing problem

    My team developed a form using Acrobat 7.x that will be triggered from a portal - directly routed to a printer. (that is, a user can  print the form directly to the printer just by clicking the form name - no need to open the form).
    The form is getting printed in certain Laser Printers but its not printing in Bizhubs.
    I suspect that the server that routes the form to printer doesnt have acrobat reader and uses Internet explorer as default application to open.  I heard that IE is not much compatible with Acrobat 7.x.
    So I tried to convert the form from Acrobat 7.X to Acrobat 6.X (using the Print option -> Adobe pdf)
    The form gets converted to Acrobat 6.X but the form misses some properties.
    That is, the form holds the Text boxes & text areas in it (in 7.X) when i converted to 6.X all these text boxes are no more.
    Could any one please help me over come these problems?
    1- Why a form that is routed thru server is getting printed in Laser Printers but not in Biz hubs.  (Please note if i open the form in my machine and print directly to any printer it prints.  It fails only when invoked thru portal - inturn thru server)
    2- why conversion to lower version of pdf misses its properties.
    Your timely help is much appreciated.  Thank you so much in Adavance.
    Thanks,
    Aravind Srinivasan.

    This is a good read for anyone attempting to convert a PDF to a Word document...
    http://www.planetpdf.com/enterprise/article.asp?ContentID=PDF-to-Word_Conversion_-_Why_it_ is_so_hard_to_do&gid=7837&fa

  • SEARCH ARRAY AND COUNT TRANSITION FROM HIGH TO LOW

    I have 4 dig inputs.  I want to count the number of times each individual input transitions from high to low and display the count  I attached the vi as v11.  Thanks for any help.
    Solved!
    Go to Solution.
    Attachments:
    count.PNG ‏94 KB
    9422_Digital_In_mod.vi ‏52 KB

    Hello Jootbox,
    Are you by any chance using a cDAQ 9181 chassis?
    If you are it might be a good idea to use the 4 counters internally available on this chassis.
    A simple example about counting edges can be found over here:
    https://decibel.ni.com/content/docs/DOC-11412
    Kind Regards,
    Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
    CLD, CTA
    If someone helped you, let them know. Mark as solved and/or give a kudo.

  • Import Error - while trying higher to lower version

    When I try to import dump from -
    Version 10.2.0.1.0 to Version 10.1.0.2.0 ; i'm getting error as
    ==>
    IMP-00058: ORACLE error 6550 encountered
    ORA-06550: line 1, column 33:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    IMP-00000: Import terminated unsuccessfully
    ==>
    pls suggest me how import the dumpt.
    Subir

    ...then import with lower version againThe official way should be export with the lowest version of export utility, but import with the import utility in the same version of the target database (where you are importing).
    Metalink note 132904.1
    Nicolas.

  • Just installed, speed from high to low?

    So we just got ours installed a few hours ago, on first test download was 36mb/s and upload was 8mb/s.
    Done a couple more tests and its now sitting on 2-3mb/s download and around 6mb/s upload.
    Any idea when I can expect it to go back to my proper speed? The engineer who tested the line said it himself "you're looking at 40mb here".

    Run the speedtest at  http://speedtest.btwholesale.com/ and after the test choose ‘Further Diagnostics’ and post the speeds and the profiles that this gives.
    Check for incoming telephone wiring to see if there are any junction boxes that come into the wiring before it reaches the master socket and that have extensions wired off them.
    Slightly different advice from Devon_Dave's:  Reboot the router/HomeHub each morning until things are stable.  
    We agree on:  Do NOT touch the modem unless things go seriously wrong.

  • Peoplesoft Project migration from version(PT8.48) to lower version(PT8.45)

    Hi all
    I would like to know the migration of a project from higher version to lower version
    for example PeopleTools 8.49 or 8.48 to PeopleTools 8.43 or 8.44 or 8.45
    and the application HR 9.0 or8.9 to HR8.8
    Any idea of this !
    Look forward to here you.
    Thank You.

    jim.marion wrote:
    I believe the ini file Nicolas is referring to exists when you export a project to file (I didn't see mention of exporting the project to a file in this thread).
    If you export a project to a file, then you should be able to import it into another tools release. If you do this, just be sure the project does not contain any PeopleTools definitions.Yes, this is what I was refering to, copy project to a file, modify the .ini (at least that was required on old PT version) as I explained before importing into target. Note if I already tested many time to move project from lower to higher PT version with this methid I never tested it from higher to lower version.
    Furthermore, need to be tested, validated, and I'm not really sure it is a supported way (modify PT release in .ini file) to copy project accross version.
    Nicolas.

  • Import repository from Designer concerning non-versioned applications (EA2)

    Hello
    I've downloaded last version of Data Modeler -> v3.0 EA2 because correcting bug about import from designer for non-versioned applications.
    I tried to import from my Designer connection but I can see only versionned applications ! I would like to see all the applications (like in Data Modeler v2). Version 3 EA2 is supposed to correct the problem ?!
    The exact version is V3.0.0.653 ! Is that right ????
    Thanks to all!

    Hello,
    On our designer we have ; one workarea and 22 Applications system and several sub-application system. Only a couple on these applications systems are versionned.
    I would like to import the 20 applications and sub-applications in Data Modeler but even if I have the Data modeler EA2 I cannot see them ! I was talking about the Data modeler version lattest version (EA2). Is it the V3.0.0.653 ?
    thanks regards,
    Rocco

  • Is there a way to not auto-convert documents to FrameMaker 9 when opening lower version files?

    Hi, All!
    Is there a way to prevent FrameMaker 9 from automatically converting lower version files to FrameMaker 9 when opening them?
    It becomes a problem when I just want to view the files. I have to save each chapter in the book to the lower version file again after viewing for my teammates to use them.
    Thanks.

    *** haven't checked, because I don't have any pre-9.0 files easily available ***  ... but from what I remember, if you're really just viewing the files in 9.0 you should need to save them explicitly back to an earlier version. FM may mark the files as "changed" when it opens them, but that's because it checks things like datestamps and cross-references. If you do not, yourself, explicitly change any content in the file you have opened, you don't need to save the changes; just close the file unsaved.  Check my supposition with a couple of files before relying on it! And other people will be able to give you a more detailed explanation of why file you haven't touched yourself still show up as "changed".

  • I just upgraded to 10.9.5 and now I get a message I can't access impt emails imported from my Power Mac

    I just upgraded to 10.9.5 and now I get a message I can't access impt emails imported from my Power Mac

    What version of Microsoft Office for Mac do you have?
    Pete

  • Importing dump taken from higher version to lower version

    Hi all,
    I have already taken dump from oracle 9.0.2 database without using exp utility of lower verion and alo without running catexp.sql script prior to export.
    Now i need to import this dump into 9.0.1 database.It gives error due to backward-incompability.
    Is there any way to import without re-exporting whole database again using exp utility of lower version against higher version.

    It is an unsupported scenario. I had to face it once with the same 920->901 versions. What I did was also absolutely unsupported at my own risk and it was a last chance action. I'll tell you what I did and how it worked for me, which doesn't mean it will work for any situation. If you open your file with a binary file editor you will see at the first file blocks a header that displays the export version "EXPORT:V09.02.00" This header is read by the import to check which version was used to generate the file and prevent an unsupported downgrade, I changed it to EXPORT:V09.00.01 and retried the import. A lot of error messages appeared, but it successfully loaded my information. I took the risk because I made sure this specific database contained just basic tables, indexes and version compatible objects and definitions, it was a testing environment, I didn't have the right Oracle version and there was no time to get it, and finally I had a bullet proof backup.

  • Export import issue from higher version to lower version

    Hi,
    I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
    Two ways i have found and tested in my test db
    1)TNS entry of 9i database has been put into 11g database
    a)Export dump was successfuly taken from 11g db
    b)Getting below error,while import into 9i database
    IMP-00058: ORACLE error 6550 encountered
    ORA-06550: line 1, column 33:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
    2)TNS entry of 11g database put into 9i database version.
    a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
    EXP-00008: ORACLE error 1455 encountered
    ORA-01455: converting column overflows integer datatype
    EXP-00000: Export terminated unsuccessfully
    Kindly advice me to overcome from this issue.
    Regards,
    Faiz

    mafaiz wrote:
    Hi,
    I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
    Two ways i have found and tested in my test db
    1)TNS entry of 9i database has been put into 11g database
    a)Export dump was successfuly taken from 11g db
    b)Getting below error,while import into 9i database
    IMP-00058: ORACLE error 6550 encountered
    ORA-06550: line 1, column 33:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
    2)TNS entry of 11g database put into 9i database version.
    a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
    EXP-00008: ORACLE error 1455 encountered
    ORA-01455: converting column overflows integer datatype
    EXP-00000: Export terminated unsuccessfully
    Kindly advice me to overcome from this issue.This has nothing to do with APEX. Post on the {forum:id=61} forum.

  • Error while transporting function grp from lower version to higher version

    Dear Experts,
      While transporting the function group and function modules from system A to system B, I am getting the below error
    "Program SAPLZATSCSNG_EINB, Include LEINBF10: Syntax error in line 000068
    Field 'GF_ETS_MODIFIED' is unknown. It is neitherin one of the specified tables nor defined by a 'D"
    System A is a lower version SAP system and system B is a higher version. I compared the code of Include LEINBF10 in both the systems and there is a data declaration of field GF_ETS_MODIFIED in system B. But this is missing in system A.
    Please guide me for this issue.
    Thanks in advance.

    Thankyou for your reply Rob.
    Actually I am transporting the function group and modules from my development system to the client development system.
    I dont have any other option but transport the files.
    Is there any possibility to modify the include without applying a patch or upgrading my system?
    Edited by: ShwetaD on Apr 15, 2010 10:24 PM

  • Transporting a model in VC from higher version to lower version

    Hi All,
    How can i transport a model built in higher version to lower version.(EHP1 to 700.14 of Portal)
    Also, will all my fuctionality work there if it is transported?
    I have imported a model built on higher version of Sandbox to lower version of Dev server by changing its version manually by opening the model in notepad.But after deployment i am not able to see any of the functionality working.Such as-I am not able to submit the data enetred in the data fields.
    Please help.
    Thanks & Regards
    Richa

    Adding some points to the above question.
    Also,I cannot clear entries from the data fileds, as there is not System Action defined for clear in version 700.14.
    Please suggest,what changes shall i make.
    Thanks & Regards,
    Richa

  • Export and import from lower db version to upper version

    Hi
    I want to export the schema from database version 9.2.0.5.0 and import in to database version 9.2.0.8.0
    What parameters I have to consider ?

    Hi,
    No consideration required during exp/imp between same version such as 9i here.
    Their are different consideration in different versions as ..
    e.g.
    In order to export your 11g database and import it back to 9i, you will have to use the exp (export utility) and imp (import utility).
    Since you are going from a higher version back to a lower version, this is what you need to do
    1. Use the exp utility of the lower version (in your case, 9i) to export the 11g database
    2. Use the lower version imp utility (in your case, 9i) to import into the 9i database
    Imp/Exp utility version should always be similar to lower db version
    Thanks,
    Ajay More
    http://www.moreajays.com

Maybe you are looking for