Import from Panasonic DMC-LX3, only RAW files being imported not JPGs

Hi,
is there a workaround for the following Aperture import transfer behaviour:
I have set my Panasonic DMC-LX3 to produce Raw (for CS4) and Jpg images with every shot.
However, when I import the SD card, Aperture only imports the .RW2 files (which are of course not supported as the DMC-LX3 is not compatible).
When I separate the RW2 files from the JPGs with two different folders on the SD card, then Aperture is able to transfer the JPGs.
Any workaround?
Thanks
Christoph

The JPEGs are there; they're just not used by default. To use them, use the "New version from master JPEG" menu item.

Similar Messages

  • Import from Panasonic DMC-FZ28 Lumix

    Trying to import from Panasonic DMC-FZ28 Lumix but the only import option is the
    in-built camera on my MPB (10.5.7).
    I can see the camera in the Finder window and can click on various photos.
    When the camera was connected to the USB port and select the setting as PC Connection.
    Is there something else I need to do in order for iMovie to see this camera ?
    Thank you,
    Jay

    If you are using iPhoto, import the photos into iPhoto. Then, in iMovie, start a new Project and name it (or open and old project). Open the Photo Browser in iMovie, and drag the photos in from there.
    If you are not using iPhoto, drag the jpegs from your camera to a folder in the Finder.
    Open iMovie. Start a new project and name it (or open and old project). Drag and drop the photos from the Finder window into your project.
    Message was edited by: AppleMan1958

  • How to import from Panasonic DMC-ZS10 to I Movie?

    how to import from Panasonic DMC-ZS10 to I Movie?

    You are probably not running the ancient original verion of OS 10.1 as shown! So what version are you running? What mac do you have? What version of iMovie do you have?

  • Aperture 3.1.2 Crashing with Lumix DMC-LX3 RW2 RAW Files

    The subject pretty much sums it up: Aperture has recently starting crashing with certain files from my Lumix LX3- I am fairly sure the problem is limited to the RW2 RAW files from the Lumix, as I shoot as well with Canon 5D and 1D MkII and have not noticed any problems with these files. Also, I should not that Aperture handles the vast majority of the RW2 files with no problems (the RAW-engine update which supports these files is installed), but there are certain files that I can not open or view- Aperture will crash immediately if I click on them...
    Any ideas? Is this something 'Repair Database' might help with or is there another problem.
    Thanks in advance,
    Jason

    Thanks for the quick response-
    No, as far as I can tell there are no adjustments that are generally common. It seems to be completely random files, and some files which worked fine at one point no longer work. I have also tried 'Remove all Adjustments' and this doesn't seem to help. It's not a lot of files- I just find them as I work through the photos to edit, but for example out of one batch of 100 or so files there were 2 files which I can't open...
    The files open fine in Adobe Camera RAW, so this seems to be an Aperture specific issue. Also Aperture has created previews for the effected files, and if I click 'Quick-View' I am able to view these previews, but Aperture can't load the RAW files.
    -Jason

  • How to import only RAW files from camera?

    I also shoot with both RAW and JPEG, such that I have access to JPEGs to share with people immediately before post-processing.  But I only want to use RAW in my Lightroom flow.
    When pictures are already in Lightroom, I use filters in the library view to show only RAW, or only JPEG, or both (by applying a filter on the file extension).
    But how do I set a filter before importing?  I would like to import only the RAW pictures into lightroom, but I don't see a way of doing that using Lightroom's import from camera card features.  I either have to let lightroom  import all, and then remove the JPEGs, or use Windows explorer to copy over just RAW files and then use Lightroom to import.
    I would like to use Lightroom in just one step to import all RAW files (but only RAW files) from the camera card directly to the library.  A file filter in the import dialog seems like an easy feature to implement.

    Another reason to have a filter in import is then you can then apply a preset to the RAW files only. At present if I want to apply a preset to my RAW files on import I have to apply it to the JPEGs too as there is no way of being selective on import. I then have to remove the preset from the JPEGs, which is a pointless and unnecessary task, whilst LR is busy rendering the unwanted look.
    I shoot both file types on one cameras as the JPEG gives me a look that is very hard to replicate with the RAW files and on another camera I use a picture style to remind me of what I was looking for when shooting. Again as it's a custom style it's very hard to replicate the look in LR from the RAW file.
    Though a major reason I shoot both JPEGs + RAW is that I was asked by a client a few years back, when I only shot RAW for all the shots as JPEGs to select down from. As this was a 4 week feature film shoot it took several days constant rendering out of Photoshop to output the JPEGs. This was just before LR and even then, LR would still take considerable time to produce all those exported files, though a lot quicker than PS I would hope. So now I always shoot JPEGs as well so I never have to waste time outputting JPEGs for a client to do a rough select.

  • How do i import file formate imaged from panasonic DMC ZS40 into PSE 9.0

    how do i import file format  image from Panasonic DMC ZS40 into PSE 9.0. Any help appreciated.
    Thanks

    See:
    * http://kb.mozillazine.org/Import_bookmarks

  • What happens to Raw files when importing Raw+JPG from camera to Lightroom Mobile on iPad? Only JPGs are showing up.

    Hey I am Brian, and I was wondering how Lightroom mobile works again as in when importing photos directly into iPad using the camera connection kit.? This is for IPad 2.  I . Like when importing raw files. now I just did a photo shoot. and I just uploaded them into lightroom 5 on desktop. the raw files are being pushed as smart priviews acroos ipad and iphone. its kinda cool seeing cr2 file showing up on lightroom mobile. when its coming from lightroom 5. but what about coming from camera to ipad.?
    I thought you can import a Raw plus jpeg into ipad and it shows up as a jpeg plus raw file. well its not doing that. shows up as just jpeg.
    cant wait for next update  of lighroom mobile.

    With this version of LR Mobile we not support the direct RAW import.
    You can vote for this feature request...Lightroom mobile: Ability to import raw files
    - Guido

  • Preview of CR2 raw files on import window from camera

    Hi
    I have this problem with my Canon XTI. When I connect the camera to the computer and open the import dialog window, I can not see the previews of my CR2 raw files. But if I copy the CR2 files to he hard disk and try tho import from it, then previews are shown on the import window.
    Can anybody help me?

    Probably because the program is trying to write back a marker to the card as it "opens" the images for the preview and the camera won't let it.
    It's not a good idea to import images directly from the camera anyway. Card readers are really cheap - and they WILL let you see the previews.

  • I can not import in Lightroom 4.4 any RAW-file from my D600. Lightroom gives no picture.

    I can not import in Lightroom 4.4 any RAW-file from my D600.  Lightroom gives no picture.

    How long have you waited?
    When I connect my D600 via USB and import in Lr it takes a long time before the image thumbnails are displayed in the Import Dialog.
    I know that using a card reader would probably be much faster (you gotta try that!).
    In the meantime I just do something else for 5-7 min (read e-mail, get a cup of coffee) and thereafter the thumbnails are displayed and import is straightforward.
    And I do have a powerful and fast system.
    So, somehow Lr and the D600 are slow to begin "talking" to each other.

  • How to Delete imported JPEGS after matching RAW files are imported as masters

    Using a 5D Mark III and shoot JPEG (SD) and RAW (CF).
    Aperture 3.5.1, using a managed library
    Perviously, using a 7D so new to shooting JPEG and RAWs from an aperture Aperture workflow standpoint.
    I know that i can import the JPEGs > delete images that do not make the cut > then import the matching RAW files in the import dialogue that correspond to the JPEGs in the Aperture Library.
    I use the RAW files as my Camera Master images and once the RAW files are imported, the smaller resolution JPEGs are no longer needed or viewed in my normal edit workflow.  I only need the JPEGs to quickly go through the images to find out which RAW files i need to import at a later time to increase the speed of import > edit > deliver.
    My Assumptions:
    1.  Logic would lead me to believe that after import the user should see a stack like image representation with whatever file type is considered Master to be on top and the viewable secondary file type on the bottom.  clicking on the image stack should allow you to see both file types as you would normally see with image stacks with the same files types.  This is not the case...  What am i missing here?
    2.  Logic again would lead me to believe that when i have the ability to delete one of the 2 image types as i do not need both in the end.  After the import process is complete and RAWs are backed up, I want to delete the JPEG files as they are just taking up more space on my DAS drive array...  There is no need to keep a duplicate of every file in both JPEG and RAW format.  This is not the case as when i delete the JPEG or RAW, both files formats are deleted simultaneously.  What am i missing here?
    Problems: (correspond to Assumptions above)
    1.  I do not seem to have access to both images (JPEG & RAW) in a stack where i can expand and close the stack to see both?  It seems like i only have access to the image type i have selected as Master?  This seems counter intuitive to what the workflow should be as why would aperture 'lock the secondary file types away' so you can't easily view both file types as the same time for comparison?
    2a.  Reality seems to be that i do not have access to the JPEG and RAW image files.  I can only see one at a time by selecting the images and choosing 'make JPEG master’ and then respectively... 'make RAW master', but you can't see both at the same time for file comparison.
    2b.  Also, I can't find a way to delete the JPEG images after the RAW files have been imported.  I would presume most professional photographers shoot RAW and do not shoot JPEG as their camera master or editing master images.  I do not understand why aperture has captured both as a pair in the library that does not allow me to delete the JPEG (in this case) as i have selected the RAW as my master.
    If someone can please help...  The function seems like either i am missing something obvious or that the implemented function of using RAW + JPEGs files for import is broken from a real world workflow standpoint.

    leonie...
    thank you for clearing that up for me.
    I think that at this point it is silly to use the JPEG+RAW import functionality as it seems that it takes longer to do the above steps than to just import only the RAW files and press on from there.
    I seems what i have done in the past of only importing the RAW files and then using the quick preview functionality to reduce image load times is the best thing in can come up with without keeping 'duplicates' in the database.
    That really baffels me that there is no built in functionality to remove the JPEG from a RAW+JPEG pair and i wonder how the real world photographers who help Apple test and implement software to solve real world workflow problems thought the JPEG+RAW import was going to be used.
    I do understand that i can use a smaller JPEG file size to reduce the bloat of the database, but used over hundreds of thousands of images is certainly going to make a dent in my total aperture database size and therefore storage needs down the road.
    If you have any other workflow thoughts, or know of a 3rd party plugin/ etc... to fix this obvious shortcoming then i am all ears..
    thank you again Leonie and have a great week

  • Lightroom 4 corrupting Nikon D800 RAW files on import

    Has anyone experienced Lightroom 4 corrupting Nikon D800 RAW files on import?

    How do you know they aren’t corrupted before you import, or the old one wasn’t already corrupted and you just regenerated the preview and could then see the corruption where what you saw, before was from the preview cache and not the current image?
    Is the corruption a problem with the Previews or does LR actually choke on the file and say it is unreadable or show you a gray thumbnail or pixilation starts halfway down the photo.
    Can you prove the files were intact coming off the card and only are corrupted after importing into LR?  Can you get to the originals on the card, still?

  • Can i with a script force bridge cs5 to show only raw files?

    Hi
    i know there is the filter feature
    but i have every time to set to show me the raw files
    can a script show only raw files ? like *.cr2
    in short i work only with raw files
    i would like to have a solution to display only raw files
    to load with bridge and have bridge ready to show only raw files
    set it on the filter feature is boring ,seeing i use it a lot and every time i run bridge i have to set the filter every time
    thanks

    It appears that with the Sort function set to Flie Type you can bring up just the raw
    files as a group.  With the Filter it appears that it always opens up in the default mode to arrange by file name.
    You could get a script to change it to file type, but that does not save any effort over just clicking on it in the Filter section.  Whether or not you can get a script to change the defalult I would ask in the Bridge scripting forum.  http://forums.adobe.com/community/bridge/bridge_scripting

  • HT2396 I quit iTunes while voice memos were importing from an ipod. Now iTunes won't import the memos. What do I do?

    Hello. I quit iTunes while voice memos were importing from an ipod. Now iTunes won't import the memos. What do I do?
    Thank you very much,
    Roger

    I have the same problem!! only thing is that i have the ipod touch 5th generation and a mac. I've been trying to find a way to get all my music to play cuz it will only play on itunes but when i try to play it on my ipod it'll just show a circle with a red square in the middle next to the songs i cant play.

  • How do one can upload a file (a PDF, doc etc) while filling a web form through chrome or safari? It is possible to upload a photo from the camera role, but other file types can not be uploaded.

    How do one can upload a file (a PDF, doc etc) while filling a web form through chrome or safari? It is possible to upload a photo from the camera role, but other file types can not be uploaded.

    For a variety of reasons, mostly related to security, the iOS operating system limits what can be done with respect to file uploading and downloading. But whenever you encounter a limitation like this always think, "There must be an app for this."
    Check the apps James Ward suggests.

  • I'm trying to print out a credit card statement from my iPad, it only prints the first page not 4pages, please help

    I'm trying to print out a credit card statement from my iPad, it only prints the first page not the 4 pages, please help

    I read your first post when I was posing a separate question on the Mac Pro board.  I now see that we may be talking about printing from an iPad with Airprint instead!!!!!  I very much suspect the print command and settings are different for Airprint but I have never used it to be able to offer concrete advice.  I think the setting choices could be different even with Airprint on the laptop and further that you may not even be using Safari but some special app???
    I've not heard or seen the term "frame" in the context of printing before except perhaps in the context of a screen shot.  Is the credit card statement a "pop-up" of some kind rather than a webpage or pdf?

Maybe you are looking for