Import from receiving interface

Hi All,
I have inserted data into rcv_headers_interface and rcv_transactions_interface.
The data is in PENDING status and how can I trigger the importing operation??
In sales order interface, I can run "order import" concurrent program, but what should i do for importing data from receiving interface??
Thanks in advance.
Best regards,
Zhxiang.
Message was edited by:
zhxiangxie @ 2007-01-22

I hope the other table RCV_TRANSACTIONS_INTERFACE
if the item is standard and not lot/serial based insert data into RCV_HEADERS_INTERFACE & RCV_TRANSACTIONS_INTERFACE and run Receiving Transaction Processor.

Similar Messages

Reg. Importing and receiving emails from multiple accounts

Hi,
My Hotmail account got locked and I am forced to create a new Hotmail account. I got an automated mail saying that I can ensure that I get my mails from the older Hotmail id with an import from the new account. I am however not able to find an option to
do that. The mails that are there in my previous account are highly critical and the mail id is used for all my transactions.
Regards,
C.S.Parameswaran

Hi,
Do you use the Hotmail account in Outlook Client? If no, as this issue is about your Hotmail account, I suggest you post the question in the following forum:
http://answers.microsoft.com/en-us/outlook_com
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

RFC to BPM - Error in receiver interface

Hi everybody,
I have created the scenario below.
i imported the ZStart_Job rfc from R/3
i created the MI_Start_Abs (abstract and async) - message type is same from ZStart_Job
i created the BPM_Job where the send interface is MI_Start_Abs.
i configured the sender and receiver agrameent, receiver and interface determination and others.
i actived everything.
When i execute the "call function ZStart_Job", the execution dosent return error in Message Monitoring, but appears one green flag with hit "Scheduled".
In XML body show the error below
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
Can anybody help me?

Guys,
I used the Configuration Wizard for create configuration again.
But occurs the same error below
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
PLEASE, can anybody helpe me?

Unable to pick up the file from Receive Location

BizTalk is unable to pick up the files from receive location.
My admin console is working so slow.
It is showing the problem of snap-in as follows:
I have checked all my receive location and its masking,it is working fine.
Actually it is working fine in dev server(snap-in problem is not occuring in dev server ) but when I import MSI and binding in UAT server.
It is not picking up the file from receive location.
I want to know one more thing :if my message box database is not working fine,will it receive the files from receive location.
Prakash

For files not received by receive location. If the Receive Location is still enabled but files are not processed by Receive Location, then check whether the host instance configured with your receive location is running. If the host instance is in
running state, restart the host instance and try.
Regarding the error in the admin console as shown in the image, people started to see this issue with admin console from BizTalk 2009 onwards. This happens in cases like you have done some activity with console and before its been refreshed it you do more
activities like expanding the node you will see this error. Sometimes WMI is bit slowly to refresh your admin console screen. Just wait for few seconds untill the WMI screen is rendered completely. Ensure you have all the cumulative updates installed for your
version of BizTalk and also ensure the service pack for your OS is updated.
Obviously if message box is not working, files will not be received/processed. But if message box is not in healthy state this would affect all other application not just one and in-fact it would affect entire BizTalk not just Receive Locations.
To start analysing this file not been processed by Receive Location, start with checking the host instance as mentioned.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

When I try to import, I receive the following message: "An internal error has occurred: not enough memory". I always download my photos onto an external hard drive.

Yesterday,I downloaded an update for Lightroom 5. Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory". The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
- I always download my photos onto an external hard drive.It is about 10 % full.
- It says I have Lightroom 5.6 64 bit
- I am working from a newer laptop (Windows). The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
- I have edited 2794 photos in Lightroom and it is all in one catalog.
- I did not have this problem until I made the update. I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
If there is more info. needed, let me know. I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
Sincerely,
Adrianne

Not Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?

Can't import from 8.1.7 to 8.1.7

This is a VERY big problem.
I have a 8.1.7 export (specific tables w/data - but not a complete database export), from a UNIX system.
I need to import the tables/data into an Oracle 8.1.7 Win2k database. What I try the import I receive:
import done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
IMP-00069: Could not convert to environment national character set's handle
IMP-00000: Import terminated unsuccessfully
However when I import a 8.1.6 database to 8.1.6 - the same character set above - converts fine............
What is the workaround to this 8.1.7 feature? I'm currently dead in the water.. thanks for the help.
Sandy

Same issue found in my iMac. But I checked another thread, it seemed to be the Aperture version problem and nothing top do with the iPhoto database. My Aperture is 3.0.1. You may try a latest version such as 3.1.1.

IDOC - BPM - IDOC Error --no sender or receiver interface definition found

I have an integration scenario, IDOC - BPM - IDOC. SAP will send ACC_GL_POSTING IDOC to XI, a BPM will start and then the BPM will send an IDOC to another SAP system.
I have read instructions on weblogs:
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
The scenario has been successfully tested in the Test Configuration Tool. However, when I try send IDOC from the source, I received the message below in the trace.
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="3" type="T">Processing mode is</Trace>
<Trace level="3" type="T">created BPE proxy for message B45CB0079DFA814BAD22CD1ED64CA6AB</Trace>
<Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">start CHECK_INTERFACE</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface ACC_GL_POSTING.ACC_GL_POSTING01*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface ACC_GL_POSTING_abs*</Trace>
<Trace level="1" type="T">select interface namespace http://summaryFinancial.sap.dominofoods.com</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="T">end CHECK_INTERFACE</Trace>
<Trace level="1" type="T">Set interface action DEL into MAST</Trace>
</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="3" type="T">inserted message into pipeline PE_ADAPTER</Trace>
<Trace level="1" type="Timestamp">2007-04-30T18:32:30Z EST qRFC raised on XBQO$PE_WS91000003</Trace>
</Trace>
Thanks,
Sergio

Rajeev,
The source system in the receiver determination is connected to R3. Other IDOCs are coming across the XI system.
Below is some trace information in the Receiver Determination.
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - IP_GeneralLedger</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) IP_GeneralLedger ACC_GL_POSTING_abs</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: ACC_GL_POSTING_abs</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
Thanks,
Sergio

Page number problem with document imported from MS Word.

I am a new Mac/Pages user and imported a Word document to use as a template to help me learn the Pages formatting nuances. This has worked well except for one problem. I have page numbers in the footer, but only the first digit of the page number shows up, i.e. 7,8,9,1,1...etc. I can't find a way to edit or delete the page number imported from Word. I can easily insert the page numbers through Pages but can't get rid of the imported pages numbers. Also, how do I prevent page 1 from receiving a page number?

Hi,
Others have reported difficulty removing page numbers from imported Word docs. I think it can be done, but it may not be worth the effort to repair the imported document when you can easily Select All and Copy the entire document and Paste it into a fresh Pages blank document without the improperly formatted, persistent Word page numbering.
Jerry

Line Output From Audio Interface Mutes When Connected To HDMI

Hello Apple Community,
As my first post to the community, I would like to shed some light on an issue I have found no answer to on the internet or support lines. I have spent a great deal of time self-diagnosing and over the phone with technical support for all devices in question.
Problem:
I have no sound when connected to HDMI. The problem is not exclusive to HDMI, as I bought two Mini DisplayPort adapters (HDMI & VGA) -- neither of which resolved my issue.
Hardware:
MacBook Pro (Retina, Mid 2012) - Intel i7, 8GB RAM, GT 650M Graphics
Audio Interface - Started out with a PreSonus AudioBox 2-In, 2-Out. Now it's a Yamaha Steinberg UR22 (2-In, 2-Out)
Powered Studio Monitors - Yamaha HS7 (Pair)
External Display - Vizio 37", 1080p TV
At first glance, it may sound like my problem is simply that I'm not set to the correct audio output when I'm connected to HDMI. However, this is not the case. With both audio interfaces, I double-checked that the output did not swap to HDMI when plugging in. Many communities believe this is a ground-loop issue with anything from my interface / speakers, to the HDMI cable itself. When I spoke to an audio specialist from Yamaha, he assured me that grounding issues were not the case. He said that ground-loops will only cause noise (hiss, static, hum, etc.), not a complete mute.
Thank you,
Matthew Morris

Okay, so Steinberg responded after 6 days to set up a call time. Three days after that, I finally received the call. Yes, 9 total days.........
Jeff from Steinberg went over all of my issues and went through a whole diagnosis. At the point where I got rid of the stock Yamaha XLR to TRS and used some unbalanced instrument cables I had laying around, the monitors worked! Jeff and I narrowed it down to either bad cables or (more than likely) bad XLR ports. I believe the ladder because the possibility of receiving 2 bad cables is less likely than possibly a single XLR port having a faulty ground or something--which would lead to the above issues.

Generating a PDF from a OTF (imported from CLOSE_FORM) and send it by mail.

Hello!
I have a problem.
I'll try to explain it toy you.
I have a SapScript that the user has the option to send it to the printer or have a Print Preview. I need to send it by mail in PDF format.
If the user select PRINT, a spool id is created, I can get the OTF, generate the PDF and send it by mail. Everything OK with that.
The problem is if the user select PRINT PREVIEW I don't get a spool id. So, what I did is to get the OTF from the CLOSE_FORM MF and generate de PDF from there. I tried several FM to generate the PDF but for sure I'm doing something wrong, because or the PDF is corrupted or I have a problem with the parameters in the SO_NEW_DOCUMENT_ATT_SEND_API1 FM.
So, what I need it: Generate a PDF from a OTF imported from CLOSE_FORM FM and send it by mail.
Examples or the FM I can use are welcome.
I tried to do search here, but I couldn't find anything that may help me..
So, please... Show me the light!!!
Thanks!!!
Bettina

Part 3
* Send Report
clear:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
refresh: mailtxt, mailbin, mailpack, mailhead, mailrec.
* Creation of the document to be sent File Name
maildata-obj_name = 'REPORT'.
* Mail Subject
maildata-obj_descr = 'Your Report'.
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + strlen( mailtxt ).
* Creation of the entry for the compressed document
clear mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
append mailpack.
* Creation of the document attachment
loop at solisti1.
    move-corresponding solisti1 to mailbin.
    append mailbin.
endloop.
describe table mailbin lines tab_lines.
mailhead = 'REPORT.OTF'.
append mailhead.
** Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'ATTACHMENT'.
mailpack-obj_descr = 'Some Report'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
mailrec-receiver = lv_email_address. "<-- a valid email address
mailrec-rec_type = 'U'.
append mailrec.
* Sending the document
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = maildata
            put_in_outbox              = 'X'
       tables
            packing_list               = mailpack
            object_header              = mailhead
            contents_bin               = mailbin
            contents_txt               = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            operation_no_authorization = 4
            others                     = 99.
Regards,
Rich Heilman

Importing From Flat File with Dynamic Columns

HI
I am using ssis 2008,i have folder in which I have Four(4) “.txt” files each file will have 2 columns(ID, NAME). I loaded 4
files in one destination, but today I receive one more “.txt” file here we have 3 columns (ID, NAME, JOB) how can I get a message new column will receive in source. And how can I create in extra column in my destination table dynamically …please help me

Hi Sasidhar,
You need a Script Task to read the names and number of columns in the first row of the flat file each time and store it in a variable, then create a staging table dynamically based on this variable and modify the destination table definition if one ore more
new columns need to be added, and then use the staging table to load the destination table. I am afraid there is no available working script for your scenario, and you need some .NET coding experience to achieve your goal. Here is an example you can refer
to:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

ISync palm conduit in 10.5 - won't work under user imported from 10.4?

My Palm m500 was syncing fine with my PowerBook G4 running Mac OS 10.4
I recently got a spiffy new MacBook Pro (Penryn) with 10.5, and although the Palm does communicate and sync via Palm Desktop, it no longer syncs via iSync with iCal & Address Book. I keep getting the following in the hotsync log:
< snip >
OK Install
iSync Conduit starting 3/13/08 10:38:34 PM
iSync Conduit: received NULL message, disconnecting...
OK iSync Conduit
</ snip >
==========
Other info:
I imported the user info for my main user from the old 10.4 installation using Migration Assistant.
• Deleted old Palm HotSync & Desktop files from the username:Library:Application Support, as palm preference files from username:Library:Preferences
• Copied the old user folder to an alternate location, and removed the Palm folder from username:Documents:
• Re-installed Palm Desktop 4.2.1 under main user (authorized as an "administrator" temporarily)
• Sync worked (no data on Palm Desktop, but everything backed up ok), HotSync even recovers and creates a new user based on the data on the device, and even backs up all the programs.
• Enabled Palm Os Syncing from within iSync (works fine, so long as the account being used has read/write permissions to HD:Library:Application Support:Palm HotSync:Conduits)
• "Enable iSync for this palm device" from the iSync conduit within HotSync Manager.
During a sync, iSync kicks in and "connects", but can't get past AddressBook syncing, and never actually sends info to the Palm device. Presumably, this is where the "NULL message" is received and syncing stops. When I specify "Erase data on device then sync" in iSync (for first syncronization), it does indeed erase address book data on the device, but never sends anything to replace it, but also does not touch the calendar data on the palm device.
Furthermore, I tried the same procedure when logged in as another administrator account (what is normally the main administrator account on this computer), and synced first without iSync, then enabling "iSync for this Palm device". Under this other account, the syncing works. I can add events to iCal, and contacts to address book, and they are transferred sucessfully and synced with the palm device. But it still does not work when logged in as the main user (even when administrator privileges are enabled, which I normally don't want), which actually has all my iCal and Address book data (which syncs successfully through .Mac with my computer at work).
There should be plenty of free space on the device for all my calendar & contact data (3MB).
Given that syncing DOES work for one administrator user (which was never before set-up for this), but not for the user that was imported from 10.4 and was syncing successfully before, I have a suspicion that there's either some leftover files that I missed, or a permissions conflict within the user's home folder that I am missing. Has anyone else been able to resolve this issue, or have any suggestions based on this information?
Much appreciated.

Experimentation reveals that:
• replacing the old addressbook data with blank allows syncing to work without problems.
• having multiple groups causes the same error: BUT only on the first sync (set to “Erase data on device then sync”, but also if set to “merge”). Adding groups after a successful initial sync did not interfere with further syncs.
• deleting groups from existing AddressBook data does allow a successful first sync.
• but adding them back in again breaks the sync.
Having no groups would seem to allow a successful sync.
see http://discussions.apple.com/thread.jspa?messageID=6805570&#6805570
I don’t want to have to limit myself to this. I do use groups rather a lot and it would be frustrating to have to give up using them just so I can sync my Palm in Leopard.
The following does NOT solve the problem:
1. Move old Address Book data to a backup location (after exporting AddressBook library)
2. do a first sync
3. re-import full Address Book data from archive
4. continue with regular syncs.
• only sync one Group still leads to the same error.
• iSync 2 doesn’t run under Leopard (error message along the lines of “You can’t use this software with this version of Mac OS”).
• I also tried to use the previous iSync palm conduit (v3.0.2 instead of v3.1.0), but got the same errors.
For now, I removed all the groups and synced my contacts to my Palm, but I then turned off syncing for contacts within iSync, so I could recover all my Address Book Groups. Fortunately, I need to update Calendar information more often than contact info, and I won’t be able to change contact info on the Palm device. When I do want to do a periodic update to my Palm device, I will have to:
1. Backup my address book
2. Delete all groups (but not the contacts within them, which stay in the library itself)
3. Turn contact syncing on in iSync
4. Sync the Palm device
5. Turn contact syncing OFF in iSync
6. Recover my Address Book Library & groups from backup
Not as simple as I would expect from Apple software ... I hope this issue gets fixed in iSync 3 (Leopard).

Display sender and receiver interfaces in CCMS

Hello CCMS Specialists,
I've a question regarding CCMS and SNMP TRAPS.
In my case I'm sending the alerts to a Third Party application via SNMP TRAPS. In CCMS I don't get the information about a specific Interface and therefore I can't send it to a third party application.
My question is: is it possibile or how to send the information from an interface (sender and receiver information) via CCMS to our Third Party application?
For example, if there has been an Internal HTTP error. We don't get the details about the interface. Hoe could we display those information as well?
Kind Regards,
Kamran

hi,
And also check spro -
> financial accounting -
> financial accounting global settings -
> correspondence -
> define correspondance check the variant bcause all are standard variants so the one which we require need 2 make changes......... create our variant..
if useful assign points....
regards,
santosh kumar

Entourage 2008 - Importing from Outlook 2007 ???

Hi guys, just got a MacBook Pro this week and I had reserved a copy of Office 2008 which I got today.
It's great because that's what I was waiting for to put my PC on sale
BUT i was astonished to see that there's not the option to import pst files in Entourage ??
I was using Office 2007 for PC therefore Outlook 2007.
The only way we can export stuff is by creating .PST files, so you can backup all your contacts, your messages with attachements and your calendar (which are my 3 priorities).
Using the equivalent application from Microsoft but for the Mac, that is : Entourage 2008, there's not the option to import .pst ?? What the heck ??
So please guys if you know a way to export my stuff (messages, contacts and calendar) from Outlook 2007 PC to Entourage 2008 MAC, please let me know !!!
THANK YOU !!

Hey guys,
I don't want to be repeting by here's the way I worked this out :
EMAILS
First I installed Thunderbird on my Win computer.
Then I imported from outlook. It took a while since my PST was like 3 Gb.
At first I was crashing it but then I let it work for a try and it imported everything perfectly, but not showing any progress bar during the process.
Second, I searched Thunderbird help for the way to export in MBOX, and it pointed out that I sould get a plug-in, which I did.
Third, having installed the plug-in, I had a tool menu for exporting. Only thing I had to do is select each folder one by one and export them using this plug-in, I only had to add .MBOX extention to every file.
Finally, when you get these files in OS X with entourage, you just drag and drop them in entourage and them import perfectly.
That did the job for me anyways.
CONTACTS
Send yourself emails of contacts !
I sent myself email (with the WORK OFFLINE option so I wouldn't receive them in outlook) in the contacts from outlook.
As you can imagine, I totally got rid of Outlook, and of Windows actually, by now but as I remember it when you right click on a contact you have an item that's called something like "send full information of contact through email".
So to keep my categories I sent one email per categories.
Back in entourage, I had to save attachements, import them, put them in a category.
Then next email, etc. and so on.
CALENDAR
I haven't found a way to do this but what I did was : In outlook you have a way to display your calendar events by a list, so I just made a couple of print screen of that list and I put the future events that I wanted to keep in Entourage.
And the conclusion is :
Well I said byebye to Entourage because I don't need MS Exchange support and I hate Microsoft more and more everyday so I'm using Mail, Address Book and iCal now
But I could easily import from entourage into all of these.
The only microsoft apps I still are the must-have : word, excel and powerpoint 2008.

Import from receiving interface

Similar Messages

Maybe you are looking for