Import from SD card hanging

New laptop (toshiba qosimo w/20gb ram, ssd and hd), new os (windows 8), new version of lightroom (5.2) new bloatware (toshiba), new problems. 
I can usually get one import from sd cards to work per boot in lightroom.  when lightroom ejects and a new card is put in (I run several cameras per shoot) it shows the pix thumbnails, correctly identifies the new images and then just hangs on import. the import bar jumps to about 2/3 and stops, even running over night does nothing.  At this point trying to use the windows explorer browser to access the sd card also hangs explorer. I can click the close "x" on the import status bar and it does eventually close though I must physically eject the card before the "Import Results" error dialog pops up.  I can then re-mount the sd card and manually copy the files into thir dated folders, making new ones as needed, and sync the parent folder in lightroom and continue working but that is very tedious.
I've made sure all bloatware is not indexing, importing, or any other bad behavior. I have tried killing of all apps and background bloatware item by item with no success. Rebooting allows me one additional import but hangs on the second sd card.
While it criples lightroom I doubt it's lightroom's fault.  Anyone have any ideas on how to troubleshoot?  If it matters I'm using the built-in SDHC card reader which is a realtek pcie unit running the "RiconMan.exe" process.  I've even tried killing that and letting it restart with no joy.
Thanks in advance,
Mark
UPDATE:
My third paragraph made me think it could be connected to the built-in reader so I searched around and eventually "borrowed" my wife's USB reader.  I was able to do 2 imports on it after the 2nd import on the built in reader had failed.  Looks like it's a conflict between realtek's reader and lightroom.  I can copy files from several sd cards in explorer so this problem only seems to afflict lightroom.
Message was edited by: Mark4Cambodia

Photos > View > Show Sidebar
YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
You can also make Photos the default app in Image Capture.

Similar Messages

  • How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

    Hi All,
    Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
    Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options.  The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
    I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    Thanks in advance,
    Phil in San Diego

    Phil,
    PhilipCWells wrote:
     I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed.  The link is:
    http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
    One of them should help you with this.
    Jeff (in San Diego as well)

  • Confusion re: photostream, import from memory card, events, etc.

    confusion re: photostream, import from memory card, events, etc.
    Up until a few weeks ago, my travel-photo-handling went like this:
    Each night, I download photos to my iPad for safekeeping. They, of course, wind up in Photostream.
    When I return home, I connect my camera card to my iMac (where I have my iPhoto library), and I can "see" the photos on my memory card - the photos which, although in Photostream, I have not yet manually downloaded.
    I select and ownload them.
    New Events are created in my Library automatically, as I have my preference set to Autosplit Events.
    This week, I came home from a trip during which I had downloaded to iPad during my time away.
    I connected my memory card to the iMac.
    iPhoto did not "see" any photos to import - as far as iPhoto was concerned, those photos were already in my Library.
    I had iPhoto show all photos on my card, selected the photos from my trip (I shot over 1000) and clicked "Import Selected"
    iPhoto says they're duplicates.
    However, the photos have NOT been downloaded manually and there are NO Events in my Library for those days.
    Note: yeah, they're in Photostream, but IN THE PAST - and I mean literally up until 3 weeks ago - the photos have ALWAYS been "visible" and importable even if in Photostream, as long as I had not yet manually downloaded to the computer.
    So my question, I guess, is multi-part:
    What changed in iPhoto and/or Photostream in the past couple of weeks?
    Why are Photostream photos suddenly considered to be the same as the photos on my card which have not yet been manually downloaded to the computer?
    What the heck is going on?
    I hate having duplicates, but I also hate being confused by something that used to be really easy, then - with Photosream - became annoying, and is now simply perplexing and sometimes imcomprehendable.

    Check iPhoto's Photo Stream preference pane to see if the highlighted checkbox in the screenshot below is checked.  If it is then all photos taken by the iPad are automatifdally being imported into your library.
    Go the the Events mode and check the View ➙ Sort menu option to verify where new Evens will be located, at the top of the window or the bottom.  Then check to see if your PS pictures are there.
    As a test launch iPhoto with the Option key held down and create a new, test library.  Connect your iPad and import all photos.  Dismount the iPad, close and reopen the test library, connect the iPad again and test to see if the same problem persists. Does it?
    If it does'nt then your current library is damaged and needs to be repaired.
    OT

  • Importing from another catalog hangs up at "Checking for changed duplicate photos" in LR 4.3

    Importing from another catalog hangs up at "Checking for changed duplicate photos" in LR 4.3.
    I went on a vacation so exported a subset of my main LR catalog on my PC so I could do some work on my laptop.  I added some new photos and also editied some olde ones.
    Now that I am back home, when I ty to Import from the smaller catalog into my Main Catalog on my PC, the Import from catalog process gets immediately stuck on the step "Checking for changed duplicate photos.'
    How can I work around this?
    Is this a new bug in 4.3?
    Thanks.
    John

    Yes, the catalogs were optimized, but...the master catalog on my desktop is
    HUGE.  I mean...really, really, HUGE.
    So, that probably explains the very long time it took?
    But...I was confused at first, and really did think that LR was 'stuck'
    while importing from the smaller catalog and "Checking for changed duplicate
    photos".
    Next time, I'll just be more patient.
    And...in the end, everything went as it should, and I now have all my edits
    and new photos incorporated into my HUGE catalog on my desktop.
    JJ&J

  • Lightroom hanging on import from SD Card

    When importing Nikon RAW images from an SD card on Lightroom 5.7 and copying to harddrive (Macbook Pro 5,4 15", OSX Mavericks, 8Gb Ram, 1Tb HDD), Lightroom hangs. When 'import' is stopped, it is not possible to import from the same source a second time (though SD Card is still shown as connected in finder).
    Lightroom will then not shut down and needs to be force-quitted.
    If I copy all of the images to a new folder on the desktop, everything works fine. If I add the SD card as a library location and import to itself, it works fine.
    This problem has only started happening with LR5.7. All previous versions of Lightroom 3, 4 and 5 worked perfectly.
    The problem report (to be sent to Apple) is below:
    Chris

    I use an SD card and checked it with MS Explorer, no error messages, neither with the restore programs, so I assume it is ok.
    In LR I tried to import the files: Copy to new location (on hard drive) plus parallel backup copy to another folder. Seemed to work ok until I clicked in LR on the "cancel import". Import stopped.
    I deleted the imported images (if I remember correctly I used the LR function) as I wanted to have them in the same folder but with correct numbers.
    Started again to import but as mentioned above, no images could be found by LR on the card. Checked with MS Explorer - no error messages, but no files, all 1.88 GB free on card.
    Used two different recovery programs, both recovered all 99 images and copied them to a folder on the hard drive.
    Tried again with LR to import from hard drive folder. All 99 image file names appeared in the preview, but all images apart from the first 14 plus image 22 were completely grey (as the frame). And only the 14+1 were imported.

  • Iphoto crashes when importing from SD card

    I found similar discussions but no solution.
    I am using snow leopard with Iphoto. I never had any problems but now I am not able to import pictures into the library. Iphoto crashes whenever I am trying to import from an SD card. I need to restart the computer to be able to use Iphoto again. Is there a limit of the library size? I read something about 250000 pictures but I am far away from this number. What might be the problem?

    Hi Terence,
    here is the first part of the crash report:
    Date/Time:  
    2012-05-23 08:12:54 +0200
    OS Version: 
    10.6.8 (Build 10K549)
    Architecture:
    i386
    Report Version:  7
    Command:    
    iPhoto
    Path:       
    /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Version:    
    9.2.3 (9.2.3)
    Build Version:   1
    Project Name:
    iPhotoProject
    Source Version:  629052000000000
    Parent:     
    launchd [108]
    PID:        
    351
    Event:      
    hang
    Duration:   
    12.62s (sampling started after 2 seconds)
    Steps:      
    87 (100ms sampling interval)
    Pageins:    
    41
    Pageouts:   
    0
    Process:    
    iPhoto [351]
    Path:       
    /Applications/iPhoto.app/Contents/MacOS/iPhoto
    UID:        
    501
      Thread 1adf  
    DispatchQueue 1
      User stack:
    87 ??? (in iPhoto + 63065) [0x10659]
    87 ??? (in iPhoto + 65994) [0x111ca]
    87 NSApplicationMain + 574 (in AppKit) [0x963d9289]
    87 -[NSApplication run] + 821 (in AppKit) [0x963e11f3]
    87 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156 (in AppKit) [0x9641edd6]
    87 _DPSNextEvent + 847 (in AppKit) [0x9641f595]
    87 BlockUntilNextEventMatchingListInMode + 81 (in HIToolbox) [0x919b2a3e]
    87 ReceiveNextEventCommon + 354 (in HIToolbox) [0x919b2bb9]
    87 RunCurrentEventLoopInMode + 392 (in HIToolbox) [0x919b2e04]
    87 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x99dad1f1]
    87 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x99dad3c4]
    87 __CFRunLoopRun + 1071 (in CoreFoundation) [0x99dadeef]
    87 __CFRunLoopDoSources0 + 1563 (in CoreFoundation) [0x99db042b]
    87 __NSThreadPerformPerform + 506 (in Foundation) [0x90d31671]
    87 -[RKInvoker _invokeTarget:] + 33 (in RedRock) [0x1d7b8d1]
    87 -[NSInvocation invoke] + 136 (in CoreFoundation) [0x99deae18]
    87 __invoking___ + 29 (in CoreFoundation) [0x99deaead]
    87 ??? (in iPhoto + 2737120) [0x29d3e0]
    87 ??? (in iPhoto + 569871) [0x8c20f]
    87 ??? (in iPhoto + 570330) [0x8c3da]
    87 ICACopyObjectPropertyDictionary + 117 (in ImageCapture) [0x9a60d396]
    87 ICACommand::ProcessCommand() + 76 (in ImageCapture) [0x9a60a4e4]
    87 ICACommand::SendSync() + 65 (in ImageCapture) [0x9a60a983]
    87 ICAAESendMessage + 161 (in ImageCapture) [0x9a61505a]
    87 AESendMessage + 4302 (in AE) [0x9a11e1c6]
    87 CFRunLoopRunInMode + 97 (in CoreFoundation) [0x99dad1f1]
    87 CFRunLoopRunSpecific + 452 (in CoreFoundation) [0x99dad3c4]
    87 __CFRunLoopRun + 2079 (in CoreFoundation) [0x99dae2df]
    87 mach_msg_trap + 10 (in libSystem.B.dylib) [0x95a84afa]
      Kernel stack:
    87 ipc_mqueue_receive_continue + 0 [0x210d84]
    Thanks

  • Lightroom freezes during import from SD card

    OSX 10.9.5
    LR 5.4
    Macbook Pro approximately 5 years old
    This has happened all of the last three times I'm importing to Lightroom from an SD card that came out of my Nikon D7000.  I'll get about 175 photos through an import from a shoot that day.  Might have 800-1000 jpegs to import.  At around 175 the whole process just hangs.  I can still use other programs but LR is hanging.  I have to end the task (successful) but quitting LR is impossible without a Force Quit.  I've tried different SD cards, that's not the issue.  Any thoughts?

    Photos > View > Show Sidebar
    YOur card should be listed near the top of theSidebar. Select it and check the box above to Open Photos for this device.
    You can also make Photos the default app in Image Capture.

  • Importing from Gopro Card

    I have a GoPro Hero HD and filming in the 1080 format. I usually end up with at least 1 hour of footage each session. I have just begun the process of learning how to correctly import from the SD card to my MacBookPro to iMovie. I selected Import Camera Movies at the Large setting based on information I have found. My end use is play these videos on my 60 inch HDTV once edited.
    Is it a normal process to take over 25 hours to run this operation? For every hour it runs, it adds another hour to the time remaining. If there are other options, what are they?

    That is not normal. It would normally take between 45 minutes and 2 hours depending on the speed of your Mac. It might take a little longer if you were analyzing for stabilization.
    I would suggest that you go to the Applications/Utilities folder and launch Activity Monitor. In Activity Monitor, select iMovie and click the Inspect button. Look at "Recent Hangs". If you see a number in there that is other than zero, you are probably in a loop, and you should click /Force Quit.../iMovie to get out of it.
    As for what would cause this condition, I am not sure, but for one thing, iMovie does not support 60P, so if your footage is 60P, you may want to pre-process it first.
    Choosing Large would give you 540P, but it would still look good and take up a lot less room. Choosing Full would give you 1080P.

  • Photos sent to file on desktop when importing from memory card

    The photos sent to a file when importing from a memory card appear in the file as Adobe documents and cannot be opened.  If I try to open a message appears 'Adobe Reader cannot open this document as it is not a supported file/
    What has gone wrong?

    You have already opened a thread on this issue, we don't need a second thread on the same issue.

  • IPhoto can't import from CF card

    Hi,
    today when trying to import some photos from my kids rugby game, iPhoto can't import several of them. In total there are 51 photos on the newly formatted CF card and 5 of them doesn't even have a thumbnail picture, and even more of them can get imported to iPhoto. I get a kind of nonsense error message telling me that iPhoto can't import a picture because it can't get recieved or something similar. If I use Image Capture I get 38 of them imported.
    I really want to save these photos, what can I do?
    And what has happened, is it the memory card that is bad? I sure must prevent this from occuring again in the future.
    Thanks...
    /Mans

    Are you importing via a card reader or are you plugging the camera directly into the computer?
    My suggestion is if you are using a card reader, you may want to go through the camera instead if you can to see if the camera is better able to hand off the photos to the Mac.
    But it sounds more like a card issue if you have problems outside of iPhoto like when trying to use Image Capture.
    Patrick

  • Can't import from SD Card

    My i-Mac, running OSX 10.5.6 is no longer able to import photo files from my SD cards, into Aperture 2.1.2.
    I have tried to import both using a USB connection between camera and computer, and by using a USM card reader.
    Interestingly, there is no problem importing images from the same cards into I-Photo. This suggests to me that this is not a hardware problem, but is an Aperture problem.
    Any ideas?

    If you copied the entire contents (even blank folders) of your SD card, then iMovie should be able to read it.
    Choose FILE/IMPORT FROM CAMERA ARCHIVE and navigate to the folder that contains the contents of your card.
    Here is a sample of what you should see.

  • Importing from Lexar card - error message

    This has happened twice on two cards - one 4gb and the other 2gb, so not the same card but same camera (Nikon D2x). Get the error message " ICA download error -9919) occurred ...
    Anyone any ideas if this Camera vs Leopard, Lexar vs Leopard or Aperture vs Leopard. As this never happened before Leopard and Aperture update.
    Images are rescued from card via Lexar software, but it is a worry.

    Hello, I've just upgraded computers, and as Leopard is on the new machine, gone from 10.4.10 to 10.5.1, and I'm now getting this ICA download error - 9919 while trying to import as well.
    I'm using a Sandisk Extreme III 2gb card, and Aperture version 1.5.6. Storing the files in the Aperture library.
    I've tried to change the permissions settings as indicated in this thread and the blog post at Inside Aperture, but it doesn't seem to be doing anything for me. And the permissions don't seem to be any different for the folders/files as they were in 10.4.10 (where everything was working fine).
    The odd thing is, the card I'm trying to import from has both jpg and raw files on it, and Aperture will import all the jpg files no problem - it doesn't give me the error until it gets into the raw ones. So it seems like if it actually was a permissions issue, this wouldn't be the case (?)...
    I went back to my old computer running 10.4.10 and tried it there, and everything works fine. So it seems to somehow be related to the switch to 10.5.1. I have the library in the same place, and haven't changed any other settings. I'm able to access all my existing photos on the new computer, so I believe everything's in the right place.
    Anyone else having this issue where the permissions fix didn't resolve it? Any advice would be greatly appreciated!

  • Keyboard Shortcut for adding clip to queue when importing from P2 card

    Does anyone know what the keyboard shortcut is for adding a clip to the queue when importing from a P2 card? Thanks!
    G5   Mac OS X (10.4.8)  

    That would be the Log Clip button which is defaulted to F2.

  • IPhoto 9.4.2 does not show mp4 movies to import from SD Card

    Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
    If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
    What could be happening to my iPhoto?
    Thanks in advance.

    but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
    Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader?  Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
    OT

  • Lightroom keeps crashing since new update 5.6 when I try to import from camera/card

    Hi my lightroom 5.3 was working sweet - however last week I updated to the Lightroom 5.6 ever since I have not been successful in my attempts to import from my three cameras nor through independently mounting the SD cards into a card reader -
    I currently work with two Pentax K5's and a Fujifilm x100
    Niether camera is working with the new Lightroom update....
    This is very frustrating -
    Has anyone else experienced this problem and is there a fix

    Hi my lightroom 5.3 was working sweet - however last week I updated to the Lightroom 5.6 ever since I have not been successful in my attempts to import from my three cameras nor through independently mounting the SD cards into a card reader -
    I currently work with two Pentax K5's and a Fujifilm x100
    Niether camera is working with the new Lightroom update....
    This is very frustrating -
    Has anyone else experienced this problem and is there a fix

Maybe you are looking for