Import from sharepoint into ms sql

When am importing data from SharePoint into SQL Server, am getting only 10 records where as it is having approx 10000 records. I'm using BIDS 2008. I'm not able to figure it out the issue. Can some one help me on this?

Hi kdinuk,
According to your description, you are missing some records while importing data from SharePoint into SQL Server.
Based on my research, the issue always occurs when Error Output (under Connection Manager and Columns) within Source or Error Output (under Connection Manager and Mappings) with Destination Component is set to Ignore Failure or Redirect Row. Then the component
will succeed, but only the successful rows will be inserted. So please check the Error Output on all your components in your Data Flow Task.
Besides, for more details about how to import data from SharePoint into SQL Server, please refer to the following blog:
http://dataqueen.unlimitedviz.com/2011/06/how-to-use-a-sharepoint-list-as-a-data-source-in-your-ssis-package/
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Comments not imported from Data Dictionary of SQL Server. SDDM 3.3.0.747

Hi,
SDDM 3.3.0.747 32-bit on Windows 7 64-bit.
Comments are not imported from Data Dictionary of SQL Server 2008. Connection through Microsoft JDBC Driver 4.0 for SQL Server or jTDS 1.2.7
What I have tried? In SDDM DDL generation, Comments in DBRMS for SQL Server are generated with "EXEC sp_addextendedproperty 'MS_Description' , 'Test Comment' ..." so I added extended property named "MS_Description" into SQL Server database, both on table and column. None of them were imported from Data Dictionary into SSDM. I have tried both drivers stated above. Is it a bug or am I missing something?
I've found similar question thread Re: Data dictionary import doesn't import column comments for SDDM 3.0.0.665, so I guess it is a bug when importing with JDBC drivers.
MiGli
Edited by: MiGli_1006342 on May 25, 2013 8:32 AM
Edited by: MiGli_1006342 on May 25, 2013 9:02 AM

Extended properties were not imported correctly from SQLServer databases at DM 3.3.0.747.
Calls to sp_addextendedproperty and fn_listextendedproperty have been modified.
I don't think it is a problem with JDBC drivers.
A bug fix should be available in the next release of DM.

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

Have a look at your import setting specifically Store Files:
Make sure it is set to where you want the originals to go.
Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

When i try to import from itunes into FCP 7 i get error, file error; 39 files recognized,0 access denied 243 unknown

When i try to import from itunes into FCP 7 i get error, file error; 39 files recognized,0 access denied 243 unknown

Be careful, FCP is an open system which is great, but it allows you to work with formats that are not completely compatible with fcp and can cause serious problems down the road. You can check the formats of all audio files brought into fcp by selecting them in the browser and hitting command-9, Use compressor to convert all audio files to 48k 16 bit aiffs before importing to fcp. There's a preset for this format in the apple presets. You mention video files. The same thing holds. In particular, avoid bringing in h264 quicktime movies. Convert to an fcp friendly format like prores using compressor.

How do I place tunes I have imported from CD into the appropriate playlists? I am running 10.9.5 on an iMac. I have 18,000 songs and 100+ playlists.It used to be easy on earlier iTunes versions. Now I can 't seem to be able to add songs or whole CDs

How do I place tunes I have imported from CD into the appropriate playlists? I am running 10.9.5 on an iMac. I have 18,000 songs and 100+ playlists.It used to be easy on earlier iTunes versions. Now I can 't seem to be able to add songs ior whole CDs into existing playlists.

Hello there, susanmeehan.
The following Knowledge Base article offers up some great information on how to create a playlist with iTunes:
iTunes 11 for Windows: Create a playlist
http://support.apple.com/kb/PH12340
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Read data from SharePoint using ABAP sql command

We need to read data from a SharePoint site and update the sap object services with the information. There is a lot of information on how to put data into Sharepoint from SAP, but we need to get data from SharePoint and put it into SAP. Is it possible to retrieve data from SharePoint using sql command in ABAP program? If it is possible, what do we need to do to have SAP recognize where to get the SharePoint data?
Richard Newman

Hi Newman,
You can use native sql in your abap code to read data from SharePoint's database. But I would suggest you to generate a SharePoint webservice which can provide you the neccessary data so that you can consume this webservice in ABAP
(Will be quite faster than native sql).
Regards,
Ozcan.

Data Import from Oracle Dump to SQL Server(2000/2005)

Hi Friends,
I'm using Oracle 10g.
I've a scenario.
I've Oracle Dump file. Now i would like import in SQL Server(2000/2005).
Can any one suggest me how to do this?
Any idea,clue will be highly appreciated.

I think you will need to import the data into SQL Server from an ASCII flat file using SQL Server DTS if avialable. You can use SQL Plus to extract the data outof Oracle into comma delimited flat files and then use SQL Server DTS load into the SQL Server database.

Importing 30 tables into one SQL Table (Help Required)

Dear Experts,
I am new in SQL server, actually i need to gather 30 different excel file in one sql server table and i have imported all excel file in different databases, all tables have 186 different columns and datatypes. I couldnt change data type while conversion.
Now all columns have different data type which are occupying extra space in my database.
Now the problem is that i need to convert all databases into one database or table. Although i have created a table but i dont have idea how to import all table into one table and defining datatype in new table while importing the old tables.
Please help me in this matter or if any body has skype or any other chatting id please do let me know so that i may explain it better.
Thanking you in advance.
Best Regards,
SQL_beginner

There are several things you can try. If you have SSIS, take a look at this.
http://www.singhvikash.in/2013/06/ssis-how-to-load-multiple-excel-files.html
https://www.simple-talk.com/sql/ssis/importing-excel-data-into-sql-server-via-ssis-questions-you-were-too-shy-to-ask/
Also, if your files have virtually the same name, like files with dates in the name, you can loop through files in your folder, and increment the loop with each run through.
DECLARE @intFlag
INT
SET @intFlag
= 1
WHILE (@intFlag
<=30)
BEGIN
PRINT @intFlag
declare @fullpath1
varchar(1000)
select @fullpath1
= '''\\path to your files\'
+ convert(varchar,
getdate()- @intFlag
, 112)
+ '_your-text-file-name.txt'''
declare @cmd1
nvarchar(1000)
select @cmd1
= 'bulk insert [dbo].[your-table-name] from '
+ @fullpath1 +
' with (FIELDTERMINATOR = ''\t'', FIRSTROW = 2, ROWTERMINATOR=''0x0a'')'
exec (@cmd1)
SET @intFlag
= @intFlag + 1
END
GO
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Look of photos change when import from D40 into iPhoto 6

I'm using iPhoto 6 and have a Nikon D40. I'm having a problem when I import my photos -- the image quality changes when they go from the camera into iPhoto. The images look more contrast-y, more saturated. I mean, the reds and oranges are so intense it's crazy. They definitely did not look like that when I viewed them in the camera LCD.
I've tried checking in preferences, but can't seem to find anything that would alter the images during transfer. Would this be a camera problem? Anyone using iPhoto 6 have the same problem as I am with their D40?
Any help would be much appreciated!

I am having the same exact problem... iPhoto 6 and Nikon D40. If I import the photos to a folder first, then import from the folder to iPhoto, I can open the iPhoto version and then open the folder version using Preview, just by clicking on the original. I then compare the two side-by-side on the computer screen. The original always looks fine in Preview, so it is clearly a problem with iPhoto over-saturating the photos. I have no solution, but only this observation.

Importing from camera into lightroom when camera is connected

I used to be able to import photos into lightroom when my camera is connected. I somehow am no longer able to do this, maybe because of updates, but I am not sure? I am using version 1.3.1 on a pc running windows vista professional, and my camera is a Canon Rebel Xti. The problem I have is that using windows to import is too slow and it has caused duplicate filenames of files. So I'd love to be able to have lightroom import from the camera like it used to. Cheers

Hello. I've seen photographers have portrait setups that have the camera connected to the computer, and as soon as they take a picture, the new image is imported.
I tried using "auto import" but it's not working properly. I'm shooting Nikon D200 and it has 2 USB modes: P2P and Mass Storage. In the former, I can't have "auto import" on because it needs to read from a folder and it's being read as a "device" instead. In the latter, I'd have to disconnect the camera to take the picture, reconnect it, but it doesn't detect a change (new picture) and so it won't auto-upload. I also have Bridge CS3 which I believe should do what I want it to do, but can't find it on there either.
Does anyone have a solution?

Can't import from Entourage into Mail

I'm trying to import my Entourage 2008 email into Apple Mail 6.0. Everytime I try I get an error message, "Error - Unable to connect to Microsoft Entourage. Try opening Microsoft Entourage first, then run the import". I tried that and it didn't work either. I exported my Entourage data as a .rge but then when I try to import it, there is a nested duplication of all the folders from Entourage. And I've got too many emails/folders to drag them. Any ideas or suggestions?

This is too late for Norm, but incase anyone else is having this problem, it may be due to having Office 2011 installed (ignore if this is not your case).
I would find the same error on trying to import from Entourage, and after digging around a bit, tracked the problem to having Office 2011 installed. Once I completely removed Office 2011, the import worked fine.

Can't import from Eudora into Mail

I'm trying to import mailboxes from Eudora into Mail. Unfortunately, Mail crashes right in the middle of the process. Has anyone had this problem? If it can't be solved, is there a way to do this manually? Finally, if all else fails, what do you consider to be a good email program other than Mail? I'd like to upgrade to Snow Leopard and

Last I knew, Eudora ran fine under 10.5.8
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Import from SLD into integration engine

When I create a new SLD namespace (sld/dev) and copy all of sld/active into this, then i can define new entries (product, versions etc) in this SLD namespace.
My problem is, how can I import these in the Design part of the integration builder. It looks like that only the items in sld/active can be selected.
Any help on if this is possible would we great.

Hi,
As your question says that,your are not able to import your software component version in to IR.
First better you cross check your software component is available or not in the SLD.
Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
Just check if the replies in this thread help you:
unable to import from SLD
Unable to read software component versions from SLD
Please reward points
Thanks
Vikranth

Importing from Illustrator into AE

Hey there,
Having some issues when importing from illustrator to AE. I have a load of text grouped into words in AI and when I import the file into AE I chose 'composition - cropped layers' so I can move around each object in AE. However in AE the layers show up in the project window as little black boxes. When I open the composition of the AI file it's just a blank composition with all the layers in the timeline window. I don't know why the text isn't showing up?
In AI all of the layers are individual layers (they aren't all under layer 1 in the layer window). Can't work out what I'm doing wrong.
Hope someone can help!
Thanks,
Abi

Hi there.
I really have no idea what the issue is.. I did the following. Copied my text from notepad, pasted it into AI, changed it to 'arial', TYPE > Create Outlines, ungrouped the text, grouped each word, went to LAYERS > OPTIONS > Release to layers (Sequence), in AE I imported the AI file as 'Composition - Cropped Layers. Then it just came up as the blocks. As a simple test I went through the same process with a new file with simple the word HELLO and it worked fine.
The only cause I can think of is maybe because I copied the text from Notepad? The font I originally chose in AI was Helvetica Neue. Maybe the font wasn't applicable to AE?
Strange!
Thanks,
Abi

ChaRM with automatic imports from Dev into QA

Hi everyone,
does anyone know how to accomplish automatically importing transports from Dev into QA when the transports are released? I want to skip the step where the IT Operator manually imports them. Thanks.
regards,
jason

Hi Sridhar,
To be specific, this SWCV has many namespaces and is already existing in Q environment. But the new ns which I created for this scenario is not getting updated to this SWCV in Q. but whenever I import, I get a message that "so many number" of objects are imported.
Regards
Vishnu

Import from sharepoint into ms sql

Similar Messages

Maybe you are looking for