Import function in Premier 6 won't work; crashes 90 percent of the program. How to fix?

I was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline, please help.

These may help
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
-and setting http://forums.adobe.com/thread/1058426?tstart=0

Similar Messages

Importing cr2 raw files won't work on ios 6 when it worked fine on ios5. Anyone have a solution?

I have been importing cr2 raw files to my iPad using ios 5 but importing cr2 raw files won't work on ios 6. Sees files in camera but when import stops it fails with an exclamation mark in red circle. Anyone have a solution?

Don't know if you care anymore or it applies, but I was able to get things working but it took drastic measures.
I had to do a full system reset and update by doing the following:
- Make note of all your settings in your system and apps especially accounts and forget about in app data that's only on your iPad and not in a cloud service because it will be gone after this
- Connect iPad to Mac and startup iTunes
- Hold down Home and Power buttons simultaneously for about 8 sec until the screen turns black
- Release the Power button but continue holding the Home button until there's a popup on your screen which indicates it's in recovery mode
- Follow the instructions to recover your iPad but recover it to factory state, not recover from a backup
- Reinstall all your apps and content
- Reconnect to all your services on your system and apps
I could not restore from a backup since it brought back my bad data too. It also didn't restore my music and no matter what I tried it wouldn't put my music onto my iPad. Had to start clean.
It appears over time that the system gets dirty and there's lots of bad data that can't get resolved. This is especially true if some of your apps have crashed a bunch.

TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
Ralph

Hi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe

My iPad2 side switch is acting up, it will only allow me to have either sound or rotate. If I unmute the rotate won't work, if I mute the rotate works. How can I get the iPad to unmute and rotate? I have restored, downloaded updates and rebooted.

My iPad2 side switch is acting up, it will only allow me to have either sound or rotate. If I unmute the rotate won't work, if I mute the rotate works. How can I get the iPad to unmute and rotate? I have restored, downloaded updates and rebooted.

You should be able to control the function that the side switch isn't controlling via the left-hand end of the taskbar : http://support.apple.com/kb/HT4085 - is the icon that appears there (notification mute or rotation lock) indicating that that function is 'off' ?

My Microsoft Office won't work! Here is the error report. Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_BAD_ACCESS Date/Time: 2015-03-04 12:04:03 0000 Application Name: Microsoft Word Application Bundle ID: com.microsoft

My Microsoft Office won't work after upgrading to the newest OS from Apple! HELP!!!!!!
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2015-03-04 12:04:03 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.4.8.150116
Crashed Module Name: unknown
Crashed Module Version: unknown
Crashed Module Offset: unknown
Blame Module Name: MSXML
Blame Module Version: 14.4.8.150116
Blame Module Offset: 0x00003125
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

If your startup disk says it is full, you need to remove some of your stuff.
Either move some documents/movies/pictures to an external drive (if you want to keep them), or delete them from your startup drive. Then, empty the Trash.
If you move them to an external, you will still have to delete them from the internal drive.
That won't fix Office (I don't think), but it will make everything run better. You need a minimum of 10GB free (more would be better).
You might need to reinstall Office. It should work without problem (well, at least as little problem as Office can muster).

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?

The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?

AirDrop on iOS devices (iPads, iPhones, iPod touches) can only AirDrop things with other iOS devices. AirDrop on Mac can only AirDrop things with other Macs.
I hope this solves your question.
Austin

Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
Logic Studio 9.1.7, OS X 10.7.5

Hi
Playhead in the right place?
CCT

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

In Windows 7 Itunes loads and runs fine. When I close it down and try to get back in it just sits there. It won't work until I reboot the computer.

I am running WIndows7. I boot up load itunes and it runs fine.. all aspects.
When I close it down and try to get back in later it just sits there. It won't work until I reboot the computer.
I have updated and reloaded several times. Nothing

Let's see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, make sure you do this below to prevent same problem after restarting windows:
Go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.

I updated my ipod touch 2G on a different computer, but now it won't work on my old computer. How do I fix it so I can get it to work on my old computer?

I updated my ipod touch 2G to 4.2.1 on a different computer, but now it won't work on my old computer. How do I fix it so I can get it to work on my old computer? Previously it was running on 4.1

To recognize your iPod touch on your Mac, AMDS has to be installed.
To reinstall follow this article:
iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier

I am overseas and bought facetime and it has an internal error and won't work. I'm ******. Any Input to fix this

i am overseas and bought facetime and it has an internal error and won't work. I'm ******. Any Input to fix this

http://support.apple.com/kb/TS3281
Assuming you want Apple to look at iPhone without a charge a good way to
start is to show you have tried the standard troubleshooting as I
suggested.
These are described in the user manual and even under warranty
the genius bar will expect these to have been tried before they spend time
looking at an iPhone as normally these steps fix most issues
However it is up to you
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Forcing program to close, I am deleting a lot of files from my trash but it stopped working about 1/2 way through (1650 files left) so I tried to reboot but it won't let me because a the program is still running which I can't close.

Forcing program to close, I am deleting a lot of files from my trash but it stopped working about 1/2 way through (1650 files left) so I tried to reboot but it won't let me because a the program is still running which I can't close (stuck at 1650 files to go). So it allowed me to click cancel now it says "stopping" for 3hrs now. Is there anyway to force the MacBook Air (new model) to close as you can't remove the battery?

Press and hold the power button until the Mac turns itself off. This force-shutdown should be done only after you've exhausted other options (you seem to have done so).
Wait at least 60 seconds.
Then press the power button to start up the Mac. It will take a little longer to start up because it will perform additional self-tests on the first boot after a forced shutdown.
Once the bootup is complete, you should be able to delete the trash. Hold down the option key while choosing to empty the trash, which will automatically delete "locked" items.

HT4623 the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?

the wifi turn-on/off feature does not work on my iphone... it's stuck on off and won't turn on. Does anybody know how to fix it?

Hello khalidbadir,
I would be concerned too if my touchscreen was not responding on my iPhone. I recommend following the steps in this article to address an unresponsive touchscreen:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Thank you for using Apple Support Communities.
Best,
Sheila M.

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the Cannon website for the correct driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

Import function in Premier 6 won't work; crashes 90 percent of the program. How to fix?

Similar Messages

Maybe you are looking for