Import Gentran DDF

I attempted to import a Gentran DDF to create a new Guideline, but no matter how many different DDF's I attempt to import I get the same error message. Error Code = 0xC00CE00D, File Position=89, Line=3, Line Bytes=27, Reason: The client 'GentranDDF is used but not declared in the DTD/Schema' Anyone run across this when trying to import Gentran DDF's ? Appreciate any input..

Hello,
Please confirm whether you are using gentran ddf (windows version) to import into the B2B document editor to create an ecs file. We have migrated many customer out of gentran i.e both ddf and Unix ig file to ecs file and they have started using our Oracle AS B2B. Please get in touch with me in [email protected] and also please send me the ddf file you are trying to import.
Rgds,Ramesh

Similar Messages

Unable to import gentran DDF file in B2B Document Editor

I am trying to import DDF file (available from a Gentran Integration Server) in to B2B Document editor (11.1.1.6 or 11.1.1.7). The DDF file has no external reference to a DTD file (and hence the first line resembles <!DOCTYPE GENTRANDDF> and not <!DOCTYPE GENTRANDDF SYSTEM "something.dtd">). While importing, I get an error "The element GENTRANDDF is used but not declared in the DTD/Schema".
Presuming the missing DTD for the above error, I created my own DTD (using Stylus or IntelliJ etc...), but that results in a variety of different errors.
Can anyone advise what type of DDF can actually be imported in to Oracle B2B ? The document is not very clear on this topic. There is a very old OTN community thread Import Gentran DDF but that also has no solution explained.
Regards

VAS_MS wrote:
please help me..First help yourself by posting a clear question
You have far to much code posted and without the use of the correct code tags its almost unreadable.
You have a question about uplaoding files with Struts then get rid of all the junk in your code thats not related to uploading files.
If you have an error then post the relevant information on the error
like
org.apache.commons.beanutils.ConversionException:
Cannot assign value of type 'org.apache.struts.upload.CommonsMultipartRequestHandler$CommonsFormFile' to property 'file' of type 'java.lang.String'
org.apache.struts.action.DynaActionForm.set(DynaActionForm.java:424)If you had posted only that you would have given enough information, that error says it all you are trying to put your file into a String and its not working.
reread the tutorial/documentation provided and try again
Edited by: pgeuens on 21-mrt-2008 8:04

Migration - Gentran EDI -- Oracle Fusion Middleware B2B

Hello All,
Please share some docs, experiences and the best practices to migrate the existing EDI setup from the GENTRAN to Fusion B2B server.
Thanks,
Kamleshwar

Hi Kamleshwar,
As far as I know, in Gentran ddf and Unix ig files are used. You may import these files in Oracle AS B2B Document Editor and generate ecs file out of it, so mappings can be reused. For configuration, I think you have to do it from scratch.
Regards,
Anuj

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

Turn number into 3D look

Does Dasylab have module that can turn many high and low numbers on flat surface into 3d look? Or can we export the numbers to other software?

I think that you will have more success with other software, such as Diadem.
If you are going to use Diadem, write the data using the TDM data format. You can easily download a TDM Excel tool from ni.com to allow you to use the data in Excel.
For most other programs, use the ASCII format.
From DASYLab.com, I find these links for programs that can read the DASYLab *.DDF format. Of course, you can always convert *.DDF to ASCII using DASYLab itselft (Read Data --> Write Data). You may encounter problems if the data channels are not synchronized (time stamp and block size), since ASCII requires the data to be synched.
http://www.vibetech.com/MEscope
Green-Eye-Writer reads and displays data of DASYLab *.ddf and other data files directly.
A Demo version is available at the Green-Eye-Data Homepage
DasyView reads and displays DASYLab *.ddf Files
Link to the Homepage of DasyView
MatLab/Simulink Import Tool (DDF-Read) for DASYLab Data files
ME'scopeVES reads and displays DASYLab *.ddf Files
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Import ddf.minim.AudioOutput;

Hi,
I have some sample code that I am trying to compile that includes the import statement
import ddf.minim.AudioOutput;
I get the error import ddf cannot be resolved.
From looking at the documentation, it looks like ddf is a part of Java.
I think that there is a .jar file I need to add to my project. However, I am unable to determine which one.
Please help.
PJ

978157 wrote:
From looking at the documentation, it looks like ddf is a part of Java. It's not part of the standard Java library.
I think that there is a .jar file I need to add to my project. However, I am unable to determine which one.Try here http://lmgtfy.com/?q=ddf.minim.AudioOutput

Generating IDoc DDF structures for EDI mapping

Hello all,
I am looking for a way to generate IDoc DDF structures to use them in the EDI mapping in Gentran.
I was able to find one on ERPGenie.com (developed by Kevin Wilson) but it is only available for ECC 4.x. We are on ECC 6 and the program gives me an ABAP dump when I try to run it.
Does anyone have the fix for this code? Or perhaps another way to accomplish this task?
Actually, I am only interested in generating the MBGMCR02 IDoc
Thanks for your help
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 12:36 PM

It's been a long time since I have done any IDOC processing.
Go to SE37 and enter the function module IDOC_INPUT_ORDERS. Display the source code. Search for "CALL CUSTOMER". You should see several "CALL CUSTOMER-FUNCTION" lines. These are enhancements where you can manipulate the IDOC data. If you locate the correct one (where the data is read from the IDOC but not yet validated), you should be able to map the partner function value. Double-clicking on the number in quotes will bring you to an "EXIT_" function module. A "ZX" INCLUDE program is referenced. If you haven't used the exit yet, double-clicking on the ZX INCLUDE will create it. The values passed into the function module are available in the INCLUDE.
Ideally, you should create a project in transaction CMOD that references the chosen enhancement. This way you can activate/deactivate without commenting/uncommenting the code in the INCLUDE.

Real time import

Hi everybody,
I'm a student using DASYLab 9 on a test bench. I get data from sensor in MATLAB and want to import this data to DASYLab to control a piezo actuator. Saving the MATLAB data as an ASCII file and importing it later in DASYLab or the other way round with a .ddf file is no problem.
But because everything should be running simultaneously I'm looking for a possibility of importing the data in real-time to DASYLab. I didn't find anything in the manuals or in this forum yet that could really help me.
Does DASYLab have the possibility of real-time data importing or should I try focusing on getting both the sensor and actuator control in one programm e.g. either DASYLab or LABView or MATLAb?
I'm thankfull for any advice!
Greetings

Thanks for the reply and sorry for that stupid question, I propably could have found out easily on my own...
I assume that the ACCEL driver is damaged or gone. I have no idea how that could happen...
The 'about' in the DAP box shows me no hardware and no accel-version.
I'm currently in contact with the Microstar Laboratories support to solve the problem but we're still on the way to find a solution.
Do you have an idea how I could get the communication with the DAP-card going again?

Filename in import statement

Hi srinivas bobbala,
Thank you for your response.But I think my quesition was not clear.My ques... is for suppose there is one datafile for importing like.. "datafile_21" Here my intention is it takes file from datafile_21 only but it appears in import statement like datafile_21<<curmon>>.
import database sample.sample data from data_file "c:\\ABC\datafile_21_AUG.txt" using server rules_file datafile on error abort;
In this it takes datafile from datafile_21.But it appears like datafile_21_AUG in import statement.This AUG coming from batch file.
Essmsh c:\\ABC\loadmxl.mxl %curmon%

No it is not possible.
I assume the data file "datafile_21" is first renamed to datafile_21_${CurrMth} in the batchscript.
After that this data file *datafile_21_${CurrMth}* is pointed in the import statement.
In the logs you will see this file as datafile_21_Aug.

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

Support package / add on import error in DB2 V9.1 / windows 2003 system

Hi
I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
I have selected "Row Compression" and "Deferred Table Creation" during installation.
Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package ALL, tp step "6", return code 0008
The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
2 ETP301
3 ETP361 "96" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
2 ETP301
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090113025807"
1 ETP111 exit code : "8"
1 ETP199 ######################################
I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
Regards,
Nallasivam.D

Hi,
Please find the real error message which I found in the same log file. This is a new installation.
System configuration details:
ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
BASIS and ABAP support pack level: (700) 13.
Error message:
3 ETP399 INDEX IN "IDS#BTABI"
3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
3 ETP399
2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#BTABD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
3 ETP399 IN "IDS#POOLD"
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
Regards,
Nallasivam.D

Import Fixed Asset by excel

Hi Every one,
     I am importing FA in SAP B1 PL 09 but failed, with system message log " Its active depreciation areas must be the same as those defined in the corresponding asset class. I checked depreciation areas and asset class, They corresponded to each other.
     Please help me to find way to solve this error.
Thanks & Best Regards
     Loan Tran

check below..
Fixed Asset SAP Business One 9.0 Configuration

Importing CD / adding folder goes to wrong folder

iTunes 9.0.1.8
Under preferences my iTunes media folder is set to "C:\iTunes" and up until recently all imported CD's and files went into that folder under the relevant artist name.
Now, however, when importing they go to a new folder called "C:\iTunes\Music" - I didn't create this folder - how do i stop this and get it back to my original preference?
Any help appreciated
Regards
Ian

Same problem, installed latest iTunes yesterday to Vista.
Import folder is defined as default iTunes-folder (C:\<user>\Music\iTunes\iTunes Library) but it still creates a folder "Music" under this and then <artist>\<record> under this one. If I modify the default folder, it creates the import under that one, but not ever into correct iTunes Library-folder.
What gives?

Importing to AE files - goes to wrong folder

I looked in the AE FAQ, didn't see the answer to my question, so here goes.
I am using AE with editing video, meaning I only use AE for some basic things. This is one of those times where my lack of knowledge is driving me mad.
When I went to import a clip, AE directs me to a folder from an old project. This happened once before, and I fixed it, but can't remember what I did. Any help would be appreciated, as I hate navigating around to a new folder all the time. I am obviously doing something wrong with the preference, workflow, or both.
Cheers,
Douglas

You're doing nothing wrong. AE will remember your new folder after you have quit and re-launched it. Ages old design flaw in the way it handles this...
Mylenium

Lightroom imports photos to wrong folder

I've been importing lots of photos from my hard drive into lightroom and been moving/renaming them in the process. I only got lightroom a few weeks ago.
This has worked fine but i've recently imported a few hundred photos off my iphone and doing the same thing - move and rename. The trouble is, these photos keep going into the 2009 folder, instead of the 2012 or 2013 folders that they should be. When i look at the photos, they have the correct name, and the capture date seems to be correct, its just lightroom keeps wanting to put them in the wrong folder by year. Does anyone understand why this might be happening?
naturally I want all my photos sorted into the right date folders as this is the way ive decided to organise my photos...

hmm so still not making sense. it keeps wanting to import my photos into the wrong destination. have removed all the photo from lightroom. how do i change it so it automatically puts the photos into the corresponding year/month they were taken..
I understand its something in the import settings/destination but cant seem to change this. not sure what parts of the import box your wanting to see Dj.
the structure now is my pictures/2009/21-7-09 then its creating new year folders and sorting them within this 21-7-9 folder..
can't see to change this?

Import Gentran DDF

Similar Messages

Maybe you are looking for