Import HDV files from Windows PC?

Hello. One of my friends has an HDV camera (Canon Vixia HV30) and a Windows PC. He will be shooting footage and sending me the raw HDV video on an external hard drive so I can process it in iMovie '09.
It's not clear to me how I can import these files into iMovie Events. Is it as simple as File -> Import Movies? Do I need to rename the Windows files to .MOV so that iMovie will recognize them?
Thanks!
David

Does this help?
http://support.apple.com/kb/PH13882?viewlocale=en_US
Note: Wireless data transfer is slow compared to a hardwire connection.
Ciao.

Similar Messages

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

An Additional plea for HELPPPPP, trying to import HDV files from a disc.

A co-worker of mine has copied HDV files of an event onto a DVD as a .mov file. When I import them into FCP it has a red line above the clip indicating it needs to be rendered. When I try to render it, the progress box blinks on then off and it doesn't render. I can hear the audio though. What do I need to do in order to render or view them?

You need to find out what codec was used to make the files. Note that .mov only tells us that it is a QuickTime file -not the codec. Once you know that, you can set up FCP accordingly or convert to something that FCP can use.
To find out.... press command & i keys in QuickTime Player to call up the Inspector window.
Post here with what it says next to Format.

Split & Import WMA file from windows to mac

I have bought several wma files online that are rights managed that I want to play on my ipod. A few days ago, I found a workaround to getting them from the internet to my ipod - download file on the windows side of my mac (I have XP installed and use boot camp), play for a few seconds on the windows media player to acquire the license, burn to CD and then go back to the mac side and use CD to download songs to itunes, then to ipod. Works great except for this problem:
I just bought a file that is too large to get onto an audio CD. I am trying to use software to split the file but I think the license is preventing me from doing this. Anyone have a suggestion?

I'm not sure that solves my problem. I still have to start on the windows side to acquire the license by playing the file a few seconds on a windows media player. Then I have to burn the file onto an audio CD in order to import it into itunes on the mac side. My problem is the size of the file is preventing me from burning it onto a CD. I'm not sure how a program like Switch would help.

How to import microsoft outlook pst files from window 7 to mac mail

How to import microsoft outlook pst files from window 7 to mac mail??

Outlook PST to MBOX Converter is a best and user-friendly software that facilitates smooth conversion of Outlook mailboxes (PST files) to MBOX files. The software supports PST to MBOX migration for Thunderbird, Spicebird, SeaMonkey, and Netscape.
For more information and free download click http://psttombox.blogspot.com

I imported an audio file from windows to itunes on my pc, how do i get that onto my iphone?

I imported an audio file from windows to itunes on my pc, how do i get that onto my iphone?

Welcome to the Apple community.
Assuming it's in the correct format, select your phone from the device list in iTunes on your computer, select the music tab and check the music you wish to sync.

Importing HDV files (.m2t) no audio in timeline (or sound gaps in audio file) ONLY IN CS6 !

After importing HDV files, wait for conforming, and drop the files to sequence, on some files there is no audio at all or partial audio.
All files played OK in any mediaplayer.
I have no such problems in CS5 or 5.5 using the same files in the same project and sequence type. HDV 1080i/25
I reinstall PR CS6 and I delete all ".cfa" and ".pek" files, but no success.

All right so what I just discover so far in order to resolve this non sense bug thing, I've exported the faulted sequence in EDL, track by track.
On the original sequence, I had a Prores 422 video clip name "Clip 497" that was manually sync with an audio file call "Audio 10".
At another timecode in the original timeline, I had a h264 clip name "MVI_0050" that was synced with an audio file call "Tascam_0455".
I said that when I select only an audio file in the timeline and I make reveal in the project, it links me to the correct audio file in the bin but when I make match frame or reveal in the finder, it links the audio to a video file. The
Well the EDL just confirmed that, in the timeline created by the EDL, I have to relink manually all the files (wich is a pain in...) and my mysterious audio file "Audio 10" appears with the name "MVI_0050", I can still link it to the original "Audio 10" but I don't understand HOW an audio get to be linked to a video file......
The audio file coming from the Tascam still have their original names in the timeline.
Very weird and not very cool.
Oh and guess what, after closing Premiere and re open it, my sequence coming from the EDL where I spent 1 hours to manually relink the media....does not have sound anymore.......................

Importing .mxf Files from an external hard drive...

Any advice or tips would be greatly appreciated. My problem comes close to others discussed, but I haven't been able to find a duplicate post. And I apologize for the length; I just want to give you as much info. as possible (I also put details in my signature) to help you help me.
I shot a short film using Panasonic's HVX200 camera, filming in HD 720p/24p, and downloaded each P2 card through a PC laptop into a LaCie Brick external hard drive. I was originally planning on editing the footage with Adobe Premiere Pro 2.0, but became frustrated with how much trouble it was having handling the .mxf files. Assured by Apple salespeople that FCP 5 would have no problem importing the footage from an external hard drive, I purchased the computer described in my signature.
Now I know that FCP/Apple only supports importing footage from the P2 card directly, and not from an external hard drive. A representative from ProMax.com was able to help me out, however. First, he had me copy the footage files onto my Mac internal drive from the external hard drive. Then, he had me select IMPORT -> PANASONIC P2. Then, I was to highlight the CONTENTS folder and import away. And it worked... sort of.
There are two major problems: 1) During this transfer, not all of the footage is making it across. I import it, and then get the much-talked about "one or more P2 clips failed to import; probable incomplete or corrupt clips" warning. After checking the original video folder on the internal hard drive and comparing it to the number of clips FCP imported, I learned that I had lost around 20 clips/video files at one point. Other shooting day transfers worked completely smoothly with all of the files imported (we split up the footage by shooting day, without touching or changing the CONTENTS folders). So, some transfers work and some don't. And 2) When I try to import the files from our 4th day of shooting, I get a "Selected path does not contain a P2 volume." Nothing is imported.
So, that's my situation, and I'm getting very desperate. I know that I'm not doing things in the Apple-supported way, but I'm really hoping there's still someway to successfully get the files from the external hard drive into FCP completely. It seems to work some of the time.
Final notes: When importing, I make sure to import the entire CONTENTS folder. There is never a LASTCLIP.TXT file listed under it in the window, but some of the days of footage have transferred perfectly, so I'm hoping that's not a dealbreaker. If it is, isn't there some way to rebuild a lastclip.txt file? I don't even know if that's the issue. And one last note: In most of my folders, the "CLIP" folder has a number of files in it. In the 4th day's footage that I can't import at all, I noticed that the CLIP folder is empty. And on the days where FCP isn't importing all the files (like I mentioned above), there isn't a CLIP file for every single VIDEO file. Could this be the main problem? Along this line, is there a way to somehow put the footage on the external hard drive back through a p2 card and then into the Mac?
Okay, I'll stop typing. Thank you so, so much for any help.
Tom
PowerMac G5 (Dual 2.3 GHz) Mac OS X (10.4.6) Quicktime 7.1.1 - Final Cut Pro 5.1 - Aforementioned External Hard Drive: LaCie Brick (FAT 32 based)
PowerMac G5 Mac OS X (10.4.6)

The problem didn't turn out to be as complicated as I had thought. The process I described above ended up working fine, and I'll explain how. And this is a cool workaround, because the AppleCare helpers told me that they didn't think it would work (FCP P2 import is only supported straight from the P2 card/viewer or the camera).
I hooked up my external hard drive to the Power Mac G5, and copied the files and folders onto my internal scratch disk. Then, I opened FCP and chose IMPORT -> Panasonic P2. I chose the "CONTENTS" folder for each day's filming, and imported them in, no problems. There was no visible "lastclip.txt" file shown (under the "CONTENTS" folder or anywhere else), but this didn't seem to cause any problems.
The reason that not all of the footage was bring imported (the aforementioned "one or more P2 clips failed..." warning) was because we were missing clip files (in the CLIP folder) corresponding to certain video files (in the VIDEO folder). Luckily, we had just forgotten to transfer all of them from the original external hard drive, and once we transfered them completely, FCP could read all the video files. FCP needs a clip file for every video file in order to make it work (that's why our aforementioned "Day 4" could not be read; we hadn't copied all of the clip files over with the video files).
Even after we did this, we STILL were getting the "one or more P2 clips..." warning for our Day 5. After taking a look at all the folders, we figured out that there were still more files in the VIDEO folder than in the CLIP folder, even after we transferred them all over. Finally, we figured out what had happened. For some reason, some of the audio files for some of the clips had been included in the VIDEO folder for our Day 5. There is no way we did this accidentally; somehow, the HVX200 placed some of the audio files into both the VIDEO and AUDIO folders. And FCP was trying to read those as video files, and therefore couldn't find the corresponding clips in the CLIP folder. After making sure that those audio files were also in the AUDIO folder, we simply deleted them from the VIDEO folder and stopped getting the "failed to import" warning.
Final thing to share: If we had actually been unable to find the corresponding clip files in our original external hard drive, we had also found a potential solution (that we didn't end up needing to try). You can record from FCP back onto the P2 card, in the hopes that the clip files would be regenerated when you re-import it into FCP. I received a PDF file about this process, and I'm not sure how to put it up on the page here. If interested in this described process (which, again, I can't fully vouch for), feel free to email me at [email protected] and I can forward it to you.
Hope this helps.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

Huge HD file sizes in iMovie when importing AVCHD files from HD Camcorder

Although several answers have been given on different ways to import HD files from a AVCHD camcorder, in this case a Sony one, the issue is what to do with the HUGE files it creates. I recorded 2 hours of HD content in about 30GB on the camcorder. I can burn those native HVCHD files on DVD's, took 6 of them, and play them on a Blue Ray player in HD. To edit, I tested a sample 50MB file that was about 3 minutes in length. It convered to quicktime file in the same 1920x1080 quality resulted in a file that was about 800MB, looked great, but how do I store or play a 20 minute version of it? iMovie is inadequate to do anything other than produce smaller size files for an iPod or lower quality, unless it is going to be a very short HD movie if doing true HD quality. One of the reasons I took the MAC plunge was the better multimedia capabilities. In this case, Apple (iMove and Final Cut) is behind.
I ended up shifting my HD editing back to a PC with $100 Sony Vegas software that can edit the AVCHD files and author in it. I can produce a DVD with about 25 minutes of edited HD in AVCDH file format and play it. I can also store the finished product in a much smaller space using AVCHD files. I have a 1 TB drive on my Mac that would be consumed if I worked in iMovie with converting all these AVCDH files and kept them in HD quality since it looks like it needs to expand them 12-16 times the AVCHD file size.
Yes, I know I could lower the quality to better work with them in iMovie, but that makes no sense to me. I want to record and edit in the HD format. Seems like these AVCHD cameras are becoming a standard since they are so efficient at storing HD content, iMovie needs to figure out how to edit and store them the same way. Very disappointed in how iMovie handles HD, to me it is NOT very good at handling HD, no good way to store or distribute it.
Am I missing soomething here? I have spent hours looking for a different answer, but have not found one yet? Maybe the next version of iMovie will be better. I like using it for SD DVD authoring, but for HD, did not work at all for me.
Jon

Interesting you say it is not meant for editing, but there are about a half dozen editor's for windows that will work on these exact files. I know with Sony Vegas that I have the same level of control with frame precision as I do with iMovie so I think there must be more to the story why Apple has not been able to support it like other software manufacturers who support windows. Don't get me wrong, i would love to do the work in iMovie and not have to learn something new. I don't have the storage space to use the HD apple format, that 2 hr of HD in AVCHD would turn into about 500GB then what do I put it on to play it. If the BlueRay standard calls for 25 or 50G disc's and we can get full two hour movies on them today, then they must be using a file format similar to AVCHD to fit on a disc, they cannot be using anything close to what Apple uses for HD files, it is just simple logic and math. So why doesn't Apple finure it out before everyone who starts working in HD comes to the same conclusion that the Apple QT file formats for HD is going to be an issue with space, you can create content, but cannot afford the disc space to store it or play it.

How to transfer files from windows 7 to macbook pro

how to transfer files from windows 7 pc to my new macbookpro

You can use your external hard drive that is used to backup your important data to transfer the data from your PC to your Mac.
If your Windows 7 PC is a laptop and you live near an Apple store, make an appointment at the Genius bar where they will help you transfer the data you want transferred from your PC to your MBP.

Transferring files from Windows, names of songs not correct in iTunes

so I have my music on an external hard drive from my windows machines. The songs 'file names' (what you see on the HD) are correct. When I tried to bring some over to iTunes, via add to library, the info was added as 'Track 1" ect, with no artist or album info. In the itunes music folder, it was sorted as the artist folder (I copied and pasted from my HD)...
I also tried to 'import' from itunes, and still the info was not correct.. when I tried the advance button to get cd info, itunes told me I couldn't do it because i didn't import with itunes, even though I did import from the external HD with itunes....what is going on? Does the 'get track listings' onlyl work if you are importing CDs?
Also since itunes just looked at the files as 'track 1' etc, that means the MP3 file did not have the correct tags, so I have re-enter everything? That the files I was seeing was just the names I gave the MP3? Does this mean I have to go back and enter the correct info for all those mp3 that itunes read as "track 1" "track 2" etc?
TIA
new macbook Mac OS X (10.4.7)
new macbook Mac OS X (10.4.7)

It sounds like the artist and track names are part of the file name and your Windows player was grabbing that info from the track names. iTunes does not use file names to supply such information and instead uses standard internal tags to hold this information and when you imported the tracks into iTunes it supplied some default info. You will need to edit the tags using a tag editor, such as the one built into iTunes or an external one such as can be found on VersionTracker.
Gracenote lookups can only be done on tracks and albums that were directly imported by iTunes from the original CD. Importing music files from any other source cannot be looked up.
If you still have access to a Windows machine, you could try running the files through MusicBrainz using Magic MP3 Tagger. I have not had much luck identifying taggless or unknown songs using iEatBrainz for the Mac (these programs are available on MusicBrainz).
There are some scripts in the Managing Track Info section of Doug's AppleScripts for iTunes that will copy filenames to track tags that can automate converting filenames to tags, but there are limitations on what can be done and you will still need to manually clean up the data and to add tags that cannot be added using such a script.

How to convert WMA files (from Windows Media Player) to play in iTunes

How do I convert WMA files (from Windows Media Player) to now play in iTunes?

Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
tt2

Is it true that Lightroom 4,4 has an issue importing RAW files from Nikon D610 ?

Is it true that Lightroom 4,4 has an issue importing RAW files from Nikon D610 ?

Hi Kenneth L,
Please use the below link to convert your raw files to DNG files then you would be able to import the files in Lightroom 4.4
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6 For Mac
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6 For Windows
Thanks

Problem with importing RAW files from camera

LR 1.3 refuses to import raw files from my camera. Only JPEG's are imported. Got a Canon 350D/Rebel XT. Once I copied the raw files to disk (using Camera Window) Import from disk works fine and converts the CR2 to DNG without a problem. The preference "Treat JPEG files next to..." makes no difference. Anybody a clue what's wrong?
Thanks, Edwin

Yeah this is a known bug with Canon cameras in general (not just using Lightroom!). If you use the camera to download your images anyway, I believe the trick is to set the camera to mass storage mode and you'll also get the RAWs. Lightroom's import from camera is very buggy though, hence it is a better idea to use a reader, or to manually copy the files to your harddisk first and import from there.

Importing XML files from Final Cut

Keep trying to import XML file from Final Cut into Adobe Premiere CC, and I get the Error Message:
The project appears to be damaged, it cannot be opened.
Not sure what I'm doing wrong.

I have an FCP generated XML file that I'm trying to open in Premiere CS6.0.2. It fails on import. The sequence of messages is below.
Premiere Pro has encountered an error.
/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/ Component/AudioPanProcessor.cpp-214
Next I get a window saying "File Import Failure"
/users/josh/library/caches/temporaryitems/ollombo.pproj
Error message: The project could not be loaded, it may be damaged or contain outdated elements.
When I check the translation results, it says: Generator Item (Outline Text) not translated for clip , Transparent Video used as a placeholder
Help, I need to get this project open!

Import HDV files from Windows PC?

Similar Messages

Maybe you are looking for