Import history of a request

Hi
How can I find out who has imported a request in Production system?
I have created a request in Development system and moved it to import queue of the Production system. there is no automatic import set. But I found somebody have imported my request to PRD. How can I find out who has actually imported the request?
Thanks in advance

Hey Vitthal,
I knew about this import log but just answered your question in a hurry as have to go for the meeting.So sorry for that.
Thought also came in mind to search and post the link as this has been discussed many times.
Anyways Juan has provided a helpful link.
PS: Also please search before posting.
Regards,
Ashutos

Similar Messages

Status in Import history of Transport Management System

Hello Experts,
I tried to import a TR from a DEV to a QA. After the first attempt I got an error RC=8. I retried the operation and as I can see in the overview of the transport logs, it worked (succesfully completed). Now I am only wondering why the status light of the mentioned TA is still red (RC=8) in the import history.
Does this light not shows the actual status?
Regards,
Tobias

Hi Tobias,
Juan mean to say here that in the 1st run the transport failsed for some reason and in the 2nd run the same transport request imported successfully with warning (Yellow light).
Any way import is over.
Regards
Ashok Dalai

Wrong user ID in import history

Dear Experts
There is an unusual Behavior observed in import history for some of my systems. Generally, in the imoprt history screen, if you do GOTO -> Display More, the column user shows the userID who has performed import for the particular request. However, in my case, the userID shown is TMSADM irrespective of the userIDs used for the import. Can somebody explain this strange behavior?
Thanks
Javed

Hi Juan
I am doing import from the same system. Sitting in PROD and importing in PROD too.
By the way, I feel you are right about RFC. The system is indeed using the RFC for import, even for the same system but how I can't understand. By the way I just noticed something. The TMS setting for Prod is setup like this
Transport Domain:
Name:DOMAIN_PRD
Controller : PRD
Backup: DEV
Transport Group:
Name : GROUP_DEV
RFC Address:
SYSTEM: PRD
Target Host: <prodcution hostname>
User: TMSADM
I did a RFC check with the button alongside and RFC check is fine. The difference with this setting and the other system setting, where this is working fine is that Transport group is set to GROUP_PRD in other systems whereas here it is GROUP_DEV. But I am unable to make the connection with the observation and result. Maybe you can see something in it.
Thanks
Javed

About How to delete STMS - imports- goto- history- import history log

Hi guys:
How to delete STMS ->imports->goto->history->import history log ?

Hi,
Sap recommends:
Use
Over time, a large number of potentially large files can accumulate in the subdirectories cofiles, data, and log of the global transport directory. These contain important information, but they also require space and become obsolete.
Procedure:
To generate a list of all deletable files in these directories, enter the command tp check all. Files are considered deletable when the accompanying request is not marked for import into an SAP System. The list that is generated is stored as the check.log log file in the tmp subdirectory and can be read.
If you want to test the command tp clearold all, enter the command tp testold all. tp testold all simulates the actions performed by tp clearold all and writes the results to the file testold.log. This file is in the subdirectory tmp. The log file contains details of the actions of tp clearold all when cleaning up the transport directory.
To delete files from the subdirectories cofiles, log, and olddata, and to move files from the subdirectory data to the subdirectory olddata, enter the command tp clearold all. (This command works using the list generated in step 1.) The tp clearold all command writes the results to the clearold.log log file. This file is located in the tmp subdirectory.
For more information on the parameters for these commands, see Transport Profile. To get the current values, use the command tp showparams <sapsid>.
You do not need a connection to the database to execute the commands that are mentioned above. The function is independent of the installed SAP R/3 release.
Pl follow the link http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5d384ebc11d182bf0000e829fbfe/frameset.htm.
Hope this fulfils your need.
Pl award suitably.
Regards

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) *   ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

Transport Import History save to spread sheet

Hi,
I have successfully saved the Transport import history as a spreadsheet.
i.e. System > List > save > local file > Spreadsheet
However, the Return code column is blank? Probably becuase the image did not convert to text?
Does anyone maybe know what I can try to get the return code populated next to the transport in the spreadsheet?
Kind Regards,
Chris

Juan, Thanks for the info.
I have also found this table to be very useful - TPALOG.
From this table I was able to extract the import history of the system I was looking for as well as the return code.
Kind Regards,
Chris

Import back the transport request to Development Server

Hi All,
I need to import back the Transport request which is in Quality Server to Development Server.
For ex: DEV900764 from Quality to Development Server.
But the same(DEV900764 ) transport request is available in Development also.
How to overwrite the transport request which in Development server ?
I deleted the request in se01, stms in DEV server.
Once i updated the copy of Quality to Development in co-file,data file in OS level. But still it show the old one(DEV copy) while importing thro' stms in development server.
How to solve this ?
actually i need the data of quality transport request

Hi Milan,
Even though you have deleted the request in Development system and later copy the co-file and data file from Quality to Development it will be the same. What is the reason of transporting from Quality to Development.
Normally requests will move from Development to Quality and to production as you already know. Once the request is released from development and transported to next systems that request will have same data in the request what it was at the time it was released and whenever you re-transport that request it will have same changes.
Why you want to do from Quality to development. If you find any differences in the changes of quality and development then some one might have done the chages directly in quailty with client being opened. If it is the same case then you need to take care of the system and avoid any direct changes. If as per my assumption if really there is any difference then make the necessary changes directly in development instead of wanting to transport from Quality.
Transporting from Quality to development is not good practise.....
Regards,
Sharath

Is it possible to see the Import History???

I am importing a lot of folders with photos from a hard drive but I lost track of what has been imported already. Can I find the import history somewhere in iphoto 11??

No. But if you start to import the same photos again you'll get a warning and be asked if you want to import the duplicate or not.
Click to view full size
OT

Lost Transport Import History after the system refresh

Hi,
We forgot to take the backup of the TPALOG table before the system refresh. We refreshed our testing system from production system. Right now we donu2019t have the old import history for the testing system. We played with TPALOG table and TPALOGHDR to synchronize TPALOG table with ALOG* files. But we are not able to do that. I remember we had synchronized the TPALOG table with ALOG* files in the past. Please advise for any function/program to achieve this. Thanks.
Thanks.
Raj.

Hello Raj,
The mechanism behind the import history is that STMS will look in table TPALOGHDR to check if the time frame for which the import history is called, is between STARTTIME and ENDTIME.
If it is, it will use the entries in table TPALOG.
If not, it will read the ALOGxxxx files on /usr/sap/trans/log and update table TPALOG.
Modifying the ENDTIME in TPALOGHDR will force reading the ALOG files again and will update the internal table TPALOG. In most cases,using the first date you find in the ALOG file that covers the missing transport.
To reduce the possibility of competing accesses to the action log you can select a system-specific name. For this purpose, set the tp parameter ALLLOG in the STMS transport tool as global and with value:
ALLLOG = ALOG$(syear)$(yweek).$(system)
This will create system dependant ALOG files like, ALOG0318.D01
It should be noted that : The import history in TMS is only available for periods after the last copy of a system. The reason for this is, that TMS needs some information about the ALOG files which are stored
in the database. During a database copy, this information is destroyed and there is no possibility to restore this data.
Best Regards
Niraj

Where is an "Import History"

Dear SAP-Administrators,
Where (Table, Folder, File) can I find the Information about Import History of an ABAP-System.
Will be this list built from different sources or it is possible to find this list in some Table.
Many Thanks in advance.
Vladimir

Hi,
This data is stored in usr/sap/trans/data and in /buffer.
But never manually change the data in this folder and files.It always risky.
Regards,
Vamshi.

How to copy import history to a table?

Hi All,
Can I copy "import history" to a table by ABAP script?
How can I get "Import History"?
1. Go to Transaction: STMS
2. From menu click "Overview", then from the submenu click "imports".
3. Click on a system , click menu "Goto">"History">"Import History"
I want to copy this view to a table.
Thanks.
Anirban.

Hi,
I am a basis guy without any knowledge of ABAP
I know to export as an excel sheet. But I want to copy the same to a temporary database table as I want to run some query like this on that temporary table.
SELECT * from <table> where <returncode>>=0008 AND <yesterday> >= <Date> <= <today>

STMS import history hangs

Dear gurus,
In our QAS system when I push the "Import history" button in STMS, it hangs forever. SM50 shows that SAPLSTFI report is updating TPALOG table with TMSADM users, but actually there is no change in the table.
Could you kindly guide me what logs should I analyse to get the issue resolved?
Best regards,
Yerkebulan

There are no errors in SM21 regarding my issue.
Today I've recognized that last entries in TPALOG table are different than previous ones: PROJECT column is empty and LINESEQUENCE column all 0000.
I guess PROJECT column is a kind of counter.
Does anybody know what it means and how to fix it?

Won't Import (history of iMac problems as well)

My DV tapes now refuse to import to my iMovie project! Luckily, the export was available so I put the two scenes I had on there onto a DV tape to save before the project crashes or something.
I've checked the connections and everything is normal. I hook it up and put it on VCR mode and it says, "Camera connected" on the blue screen. I press play and the blue screen says, "Camera playing" and does nothing but sit there with that screen. I look on the view finder and the camera plays. THEN when I try to import, it simply ignores the command and does nothing. And all the buttons on the screen (Seek Backwards, Stop, Play, Pause, Seek Forwards) are starting to mess up as well. When I put the arrow over them certain ones actually disappear until I take the arrow off its spot. I have 133 GB on my Mac so I don't know what's going on here. Messed up?
There's a history though. I posted on here about another problem I had. I had slaved over many, many hours (about 10) on this same project and gotten finally 17-18 minutes edited on the computer. I was down to 88 GB at the time. Right on queue, everything becomes corrupted in the project. The audio is not only out of place but the pitch is off and there's weird scratchy sounds that come with it. It automatically saved that way, because I quit the program without saving, went back in. It was still that way. Shut down the computer. Looked. Same. Shut down again. Looked. Same.
What should my next move be? Should I get a repair dude or is it fixable myself you think? I'm no expert on the workings of the Macintosh, so heeeeelp meeeeee.

I've checked the connections and everything is
normal. I hook it up and put it on VCR mode and it
says, "Camera connected" on the blue screen. I press
play and the blue screen says, "Camera playing" and
does nothing but sit there with that screen. I look
on the view finder and the camera plays. THEN when I
try to import, it simply ignores the command
I don't know what's going on here. Messed up?
Hi Bad!
Yore back, you do not press play on your dvcorder skreen but on the small oval on your mac that say IMPORT! the dvcorder should start automaticly You won´t see anything on skreen during import.
Have you repaired and verified permissions? You should connect to internet and do a upgrade of software then do restart That should hopefully set allthings straight Your mac is a finetuned tool and needs softwareupdates to get rid of iMovie bugs, we are now on 4.10.7
Go with tiger! Ivar. . .

R/3 SP Import:Open data Extraction requests Error

We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh S

Thanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help...

Import history of a request

Similar Messages

Maybe you are looking for