Import ics into Calendar, getting error 403...

I have been getting this issues since upgrading two weeks ago to Yosemite. Every invitation I get from my work colleagues end with this continuous error. It means I am constantly cancelling the errors for each invitation continuously all day.
The server responded:
“403”
to operation CalDAVMoveEntityQueueableOperation.
(Someone else posted the same question but when I try to reply Apples says I am logged in so I posted it again)
I have tried deleting all calendar settings and connecting to iCloud and downloading the calendars again. This fixes it until I get new invitations and the problem starts again.

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2   
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
          Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

Similar Messages

  • Lightroom trial doesn't show complete menu selections or import button.  Also get error message on launch:  An error occurred when attempting to change modules.  I am unable to find/see the following file to try renaming the SLCache and SLStore files:  Sy

    Lightroom trial doesn't show complete menu selections or import button.  Also get error message on launch:  An error occurred when attempting to change modules.  I am unable to find/see the following file to try renaming the SLCache and SLStore files:  System Library/Application Support/Adobe.  Any ideas?  I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro.  This is all I am seeing after Lightroom opens.  Thanks!

    Thanks to both of you for attempting to help.  I finally figured out what was wrong . . . it was a Permissions problem.  Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem.  I had to add a User and give it Read/Write privileges to Lightroom.  The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery.  Only a few days left on my trial version!  I hope I have time to try it out!

  • I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    adamboettiger wrote:
    Sophos and MacKeeper
    There are many reported problems with both these programs.
    Run through this list of fixes in order, will tune you right up.
    They are in order for a reason.
    ..Step by Step to fix your Mac

  • All free/busy requests get error 403 in iCal with MobileMe

    I'm playing for the first time with looking with my availability in iCal / Lion / MobileMe CalDAV accounts.
    Everything else is working well with my calendars and Mobile Me.
    I can add events, remove them, edit them, the sync is working well between the web interface and iCal on my Mac (10.7)
    The only thing amiss is the availability window just logs an error to the console after a short time out.
    It's error 403 which seems to be a permission denied error.
    Do I need to grant permission for MobileMe to publish my free/busy status anywhere?
    It it locked down until I allow sharing?
    Is it tied to sharing a calendar some how?
    Just sending a call out to others in case I'm missing something obvious. There are instances of this error on the boards with iCal and 10.6.6. so I presume it's more a server setup / service interruption than something I can change.
    Thanks for any input - even if it's a "it works for me right now" or "I too can't get mobile me status in iCal"
    (p.s. Mobile Me support says they can't help - talk with iCal people.)
    (p.s. After two hours on the phone with iCal - it's back to the MobileMe people to try again. I figured I'd give a shout here before I try them again...)
    Here's the error message from /private/var/log/system.log
    7/27/11 12:48:30.780 PM          iCal          Error Error Domain=CoreDAVHTTPStatusErrorDomain Code=403 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 403.)" UserInfo=0x7fd30cbbe3d0 {CoreDAVHTTPHeaders=<CFBasicHash 0x10300c1e0 [0x7fff7dbf7ea0]>{type = immutable dict, count = 7,
    entries =>
              0 : <CFString 0x7fff7c240c18 [0x7fff7dbf7ea0]>{contents = "Server"} = <CFString 0x7fd30cabf370 [0x7fff7dbf7ea0]>{contents = "MobileMeCalendarServer 1C97"}
              2 : <CFString 0x7fd30cd8acb0 [0x7fff7dbf7ea0]>{contents = "DAV"} = <CFString 0x7fd30cb97840 [0x7fff7dbf7ea0]>{contents = "1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendarserver-sharing, calendarserver-subscribed, calendarserver-principal-property-search"}
              3 : <CFString 0x7fff7c240780 [0x7fff7dbf7ea0]>{contents = "Content-Type"} = <CFString 0x7fff7dbf1640 [0x7fff7dbf7ea0]>{contents = "text/xml"}
              4 : <CFString 0x7fff7c2407b8 [0x7fff7dbf7ea0]>{contents = "Date"} = <CFString 0x7fd30cbd9810 [0x7fff7dbf7ea0]>{contents = "Wed, 27 Jul 2011 17:48:30 GMT"}
              6 : <CFString 0x7fff7c240710 [0x7fff7dbf7ea0]>{contents = "Content-Length"} = <CFString 0x7fff7dbebe80 [0x7fff7dbf7ea0]>{contents = "280"}
              8 : <CFString 0x7fd30cd636e0 [0x7fff7dbf7ea0]>{contents = "X-Transaction-Id"} = <CFString 0x7fd30cbd7060 [0x7fff7dbf7ea0]>{contents = "nk11r10me-calsvr003-10-1311293226-3551930"}
              9 : <CFString 0x7fd30cab2b10 [0x7fff7dbf7ea0]>{contents = "X-Responding-Server"} = <CFString 0x7fd30cdeda10 [0x7fff7dbf7ea0]>{contents = "nk11r10me-calsvr003 10"}
    } getting free-busy information for (
        "mailto:[email protected]",
        "mailto:[email protected]"

    I have a similar issue. My girlfriend is using a yahoo address and for the life of me I cannot send her an iCal invite from my me.com or mac.com address. It never shows up in her email, not in inbox, not in junk, not deleted. I get an exclamation point on her name in the iCal invite. I can send her invites from Gmail. I created a test account on yahoo and I can send invites to that test account.
    Of course I can email her just fine. I can open the invite in iCal, select the down arrow on her name and select "send email" that works just fine. I try to "invite again" and nothing... this is maddening
    I've deleted iCal cache, deleted her contact, tried just using her smtp yahoo address, i don't have this issue with anyone else that I know of...

  • Getting "Error 403--Forbidden" while accessing ADF bookmarked URL

    Hi,
    Here am trying to work with an ADF application to suport bookmarking.
    Following are the steps I did to create a sample application.
    Created a bounded task-flow (user-details.xml), which has the "Method call" as default activity along with an another view activity(userData.jsff page).
    This task-flow takes an input parameter "Id" to display user details. In the method call activity user data will be initialized using the given input parameter and then the data will be displayed using userData.jsff page.
    Created a view activity (details.jspx page) in adfc-config.xml file.
    Marked the "details.jspx" file as bookmark-able by changing "Bookmark property to true" and given a Bookmark URL Parameter "Name is Id and Value is #{pageFlowScope.user_id}".
    Dropped the bounded task-flow user-details.xml as a region into the details.jspx file.
    Now the user_id which is coming as URL Parameter will be passed to user-details.xml task-flows input parameter value.
    Created users.jspx page which lists all the users as home page. In the users.jspx page we'll have a link to user details page with a parameter Id.
    By running the application will get users page. When I click on the user details link in the users page, the app showing user details page as expected.
    Now I bookmarked the user details page. If I open the bookmarked page in the same tab, it is working fine. But when I open this bookmark in a new tab getting the "Error 403--Forbidden" response.
    Bookmarked URL: localhost:7101/BookmarkTestApp-ViewController-context-root/faces/user_details?id=123&_afrWindowMode=0&_afrLoop=4884151149818&_adf.ctrl-state=35yghmx4f_18
    When I click the above bookmark in another tab the url is processing for few seconds ( 2 to 3 seconds) and converts to localhost:7101/BookmarkTestApp-ViewController-context-root/ and giving 403 response. At this time it is not touching my beans at all (verified this by running the server in debug mode).
    Web.xml looks like:
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
             xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
             version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
      <context-param>
        <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
        <param-value>client</param-value>
      </context-param>
      <context-param>
        <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
        <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
        <param-value>false</param-value>
      </context-param>
      <context-param>
        <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
        <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
        <param-value>true</param-value>
      </context-param>
      <filter>
        <filter-name>trinidad</filter-name>
        <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
      </filter>
      <filter>
        <filter-name>adfBindings</filter-name>
        <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
      </filter>
      <filter-mapping>
        <filter-name>trinidad</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
        <dispatcher>FORWARD</dispatcher>
        <dispatcher>REQUEST</dispatcher>
      </filter-mapping>
      <filter-mapping>
        <filter-name>adfBindings</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
        <dispatcher>FORWARD</dispatcher>
        <dispatcher>REQUEST</dispatcher>
      </filter-mapping>
      <listener>
        <listener-class>oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack</listener-class>
      </listener>
      <servlet>
        <servlet-name>Faces Servlet</servlet-name>
        <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
        <load-on-startup>1</load-on-startup>
      </servlet>
      <servlet>
        <servlet-name>resources</servlet-name>
        <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
      </servlet>
      <servlet>
        <servlet-name>BIGRAPHSERVLET</servlet-name>
        <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
      </servlet>
      <servlet>
        <servlet-name>BIGAUGESERVLET</servlet-name>
        <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
      </servlet>
      <servlet>
        <servlet-name>MapProxyServlet</servlet-name>
        <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
      </servlet>
      <servlet>
        <servlet-name>GatewayServlet</servlet-name>
        <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
      </servlet>
      <servlet-mapping>
        <servlet-name>Faces Servlet</servlet-name>
        <url-pattern>/faces/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>resources</servlet-name>
        <url-pattern>/adf/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>resources</servlet-name>
        <url-pattern>/afr/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>BIGRAPHSERVLET</servlet-name>
        <url-pattern>/servlet/GraphServlet/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>BIGAUGESERVLET</servlet-name>
        <url-pattern>/servlet/GaugeServlet/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>MapProxyServlet</servlet-name>
        <url-pattern>/mapproxy/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>resources</servlet-name>
        <url-pattern>/bi/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>GatewayServlet</servlet-name>
        <url-pattern>/flashbridge/*</url-pattern>
      </servlet-mapping>
      <mime-mapping>
        <extension>swf</extension>
        <mime-type>application/x-shockwave-flash</mime-type>
      </mime-mapping>
      <jsp-config>
        <jsp-property-group>
          <url-pattern>*.jsff</url-pattern>
          <is-xml>true</is-xml>
        </jsp-property-group>
      </jsp-config>
    </web-app>
    Am I missing any thing here.
    Thanks in advance.
    -Gopal.

    https://blogs.oracle.com/DavidGiammona/entry/why_do_i_get_this_error_403_--

  • After I replaced my iphone 5s, I restarted icloud on my mac. Now ical doesn't work I get error 403

    I got a new iphone.  Changed from an iphone 5 to iphone 5s.  I had trouble with the sync, and in the midst of it I signed out of icloud on my mac.  It told me it would delete everything from my mac.  I signed out anyway.  Now that I've signed back on, I cannot use my ical app.  I get an error "403" to operation CalDAVMigrateToServeQueueableOperation and the ical locks up and I have to force quit.  I have tried to turn calendar off in settings, but it does not help.  I can't find any help on the support pages on this.  Seems people have problems like this, but there is no fix. The calendar on my new iphone is working, although, it's been over a week and it has still not fully restored my whole backup of the phone (32gig).  Could that be part of the problem?  I have been using my icloud calendar on my mac in the mean time, but I would like ical to work.

    Hi mgarcia3,
    If you are having an issue with
    As someone who uses my iPhone almost constantly I can certainly understand how you would be upset to have it not be able to even turn on. Let's see if we can get you back up and running.
    I would suggest that you troubleshoot using the steps in this article - 
    iOS: Not responding or does not turn on - Apple Support
    Be sure to note the last step -
    If the above steps do not resolve the issue, contact Apple.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Importing ICS to calendar across devices

    I have set up family sharing for a calendar. When I import an ICS into this shared calendar it a) doesn't share to the target devices (an iPhone 6 on 8.1.2) and b) it disappears from my iPad after around 10 mins or so (iPad Air 2 on 8.1.2).
    What am I doing wrong?

    Which version of Outlook is letting you export/save your events as .ics? We often export events out as a .pst, then install the Outlook Connector (as default calendar/profile), then import those appointments (from the .pst). This has worked for 1000s of appointments and rarely causes much grief.
    js

  • Get error 403 logging in to iCloud

    My email and password have been confirmed by Apple but when I try to log into iCloud there is error 403 too many different log inns

    Did you ever get a solution to this? As I have the same problem, but I don't have any accounts on iCloud?

  • Why do I get error=403 when I try to register for an ePrint?

    I just installed HP Officejet Pro 8600 N911a on a wireless network connected to my desktop, running Windows 7 64bit.  I am trying to register for an account on the HP ePrint Center website, but I get an error message "Ajax Submit Failed: error=403, forbidden.  I am frozen out and can go no further.  Any suggestions?

    Hi, sorry you're having this trouble. Here is a link to a similar thread with some suggestions of things to try and resolve the problem Ajax Error = 403
    Hope this helps.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • When Trying To sign into NetFlix Getting Error 1006

    When I tried to sign into Netflix I kept getting Error 1006.
    But I Already resolved my Issue
    1. Hard reset, hold down the power & home button at the same time and release until you see the apple logo appear
    2. Reset network Settings
    3.Reset All Setting's
    4.Deleted and re downloaded the application.
    Baaam now it works

    Hi -
    I am getting the same error 1006 when attempting to login to Netflix on my Ipad mini IOS7.
    I have read your solutions, which worked for you.
    What exactly do you mean by 1 - RESET NETWORK SETTINGS  and 2 - RESET ALL SETTINGS?
    Is it in the Netflix settings itself?
    [email protected]

  • Trying to setup eprint, and I get error 403

    Setting up eprint.
    When I try to login, I get an error message..." error 403.."
    Same result when I say I don't remember the password.
    Suggestions?

    rkramford, welcome to the HP forum;
    What browser are you using?
    Use another browser, and clear your internet browsing history and cookies.
    Try again let me know the outcome I will do my best to assist you.
    Hope this helps;
    RobertoR
    Remember . . . 
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Why do i get error 403 forbidden when downloading mountain lion

    I managed to download 2.2Gb over 3 days then it crashed with error 403. I started again after downloading Hotspot Shield got to nearly 4Gb and same again error 403 forbidden? is there a way of not having to start again without loosing the data ive downloaded?

    Hi, sorry you're having this trouble. Here is a link to a similar thread with some suggestions of things to try and resolve the problem Ajax Error = 403
    Hope this helps.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Why do I get error 403

    What is error 403 mean

    Hi, sorry you're having this trouble. Here is a link to a similar thread with some suggestions of things to try and resolve the problem Ajax Error = 403
    Hope this helps.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Need help - can't import some photos into iPhoto - getting error msg

    I have a lot of photos on my computer. Most of them are in my iPhoto, but I can't seem to load all of the photos in there and integrate them al. I am getting an error message. The jist of the message is that they are unreadable and that they cannot be imported. The photos are jpegs. I am kind of at a loss as to why these photos are not getting imported.
    Does it have anything to do with where the photos were taken from? What I mean is that when I have current photos on the camera, they will go directly to iPhoto. What about the ones that are copied to my hard drive from another computer? Those I can't seem to integrate into my library. An suggestions? Thanks.

    whatsupdut?
    Welcome to the Apple Discussions.
    Are these troublesome files in the iPhoto Library Folder? Are you putting files in there hoping to see them in iPhoto?
    iPhoto is a database, the images have to be imported (File -> Add to Library) before they can be seen. Also, as a precaution against duplication, iPhoto will not import pics from the iPhoto Library Folder, so move them out to the desktop and then import them.
    Regards
    TD

  • Importing VHS into iMovie - Communication Error

    Hi
    I have just got a new iMac with iLife 08.
    I am trying to import VHS tapes through a Canon camcorder into iMovie. I have done this many times before using Final Cut Pro on my old computer. My old FCP isn't compatible with OSX 10.5 so I have to use iMovie for the first time.
    My problem is when I connect everything up, I get a 'communication error'. I can play the VHS and see it playing on the camcorder but it won't play on the import window in iMovie. i have tried importing it anyway and it does capture a couple of seconds and then stops.
    Does anyone have any ideas?
    Thanks.

    I have the same problem, used the info from the above link....
    Live import workaround #2: Put a tape in the camcorder and put it into CAMERA mode. Launch iMovie HD 6.0.2 -- its import mode should show the live feed from the camcorder. Remove the tape -- iMovie HD should continue to show and import live feed from the camcorder. The drawback with this approach is that it produces wear and tear to the camcorder. If you keep the tape in the camcorder, it may also go into standby mode if the tape is paused.....
    But then switch from camera to play (VCR) on my canon MV500i
    imac   Mac OS X (10.4.8)  

Maybe you are looking for