Import idvd to imovie

Hello Apple and iMovie Geniuses
I have created 3 year ago a movie which I have burnt on iDVD. I have since had to reinstall the operating system and also upgraded to Lion. The iDVD project is on my external drive, I have managed to re-burn it on iDVD. I want to promote my work and post it on my website. I can not import the DVD project on iMovie nore on QuickTime player 7 or 10 or iTunes... How can I resolve this issue to post the film I made on my website please. I am out of solution and also out of patience now. Any help would be greatly appreciated. Thank you a lot.
Fred

hey there iNead...,
there's no way to go from iDVD to iMovie w/ a DVD project. you can rebuild the project in iMovie; have more photos, make them last 10 secs or longer & lay captions on top, but 10 sec isn't very long-keep captions short.
good luck.

Similar Messages

Import files into iDVD from iMovie OR export files from iMovie to iDVD?

I've been told it is better to import iMovie projects into iDVD (within iDVD) rather than exporting from iMovie to iDVD within iMovie. I was told that iDVD does a better job of rendering things than iMovie. Is this true because this is not the instructions given in the iMovie tutorial.

Not sure what advice you have been given and how you have interpreted it.
You are of course referring to im6 here since you can't drag projects from im08 to iDVD.
I don't make many DVD's anymore and may well be wrong here but I'm not aware that dragging an im6 project to iDVD is any different than using share/iDVD and I'm wondering if the advice relates to exporting from im6 and then importing the exported movie into iDVD which is indeed a different workflow.

Importing iDVD project into iMovie

I want to send a slide show from iDVD into iMovie. The show looks normal in quicktime but when I attempt to drag the .mov file into iMovie I get the message "Error during import. The file could not be imported: Unknown error". The procedure has worked fine in the past but now I've hit a brick wall. Help!

I finally found out why I was unable to import my iDVD file into iMovie. I am a new Mac owner and I had used an illegal punctuation mark in the title of my slide show (China/Japan). I received a useless message - "The file could not be imported: unknown error". Thank you very much. My old PC with Microsoft would have immediately told me to retitle the file and that would have been that. Mac's poor error warning caused me to stop my project for days because they could not even give me a simple reason for the error. My education continues. I love the iLife software but find it to be incredibly difficult because every day I run into unexpected problems. When finished the results are truly beautiful - if you have unlimited time. I am impressed with Apple's help forum.

IDVD and imovie will not import

I cannot import anything into iDVD or iMovie. I don't know if I have the wrong format, the files are too large, or what.
I had videos from my hi8 put onto DVD's. They are in individual folders marked "video TS"
They are "NTSC format. They are not "PAL" When I could not import them, I converted them in MPEG Streamclip to "DV" format, no luck. Then I tried MP4 format, no luck. I imported them using "file, import" into a new project. An error window appeared: Error during import. The file could not be imported: unknown error.
OR "The file could not be imported" and it named the file
I trashed the preferences file, also, just in case it was the software itself.
I HAVE to get a section of one of them removed for an eulogy next week.
Any ideas?

Please use the Help Menu in iDvd and in the search field type in "Formats that work with iDvd".
Then please read these links and/or run the Tutorial for iMovie and iDvd:
http://www.apple.com/ilife/tutorials/#idvd-create-63
http://discussions.apple.com/thread.jspa?messageID=6773923&#6773923
http://discussions.apple.com/thread.jspa?messageID=6233860&#6233860
http://discussions.apple.com/thread.jspa?messageID=6288604&#6288604
After you have done all of the above please feel free to post your questions here as well and I will do my best to answer them for you.

Importing Video from iMovie HD - What's the Trick?

Hello brilliant Mac Fans,
I've been working steadily to create a cool demo reel for a client using iMovie HD (6) and Keynote '08. Well, the file in iMovie is Widescreen DV, and looks great. When I export it at full quality (as a dv file,) I play it in Quicktime and everything looks dandy, but when I drag that same file into Keynote, it has the wrong aspect ratio and has skips here and there...
I guess my question is, for Widescreen video, what are the ideal settings? Does anyone know the best frame rate, kind of file, etc. that plays well with Keynote?
Thanks to all for reading...

Hello Carol,
you can create slideshows in iPhoto, iMovie and iDVD. In iPhoto you can create your slideshow in a few simple steps with music and transitions, then export it to iDVD for DVD authoring. One drawback (for me) is that you choose the duration for each picture and a transition, and these will be applied to all the pics in the slideshow, so not much room for customisation. On the other hand, if you want something quick and simple, this might be the right approach.
In iMovie you can import the pictures from your iPhoto library and create a slideshow. Here you have the possibility to completely customize all the settings (length of each pic, different transitions and music) and you can add titles and effects if you like. The process in iMovie will be longer as you'll have to import the pics one by one and change settings everytime you want a different outcome, but it will be a more personalised creation.
In iDVD you can create slideshows more or less like in iPhoto with more or less the same options. You can import your pics from the iPhoto library or from a folder and set duration and transition type and add music.
There have been several posts on this forum regarding problems with pic quality when played from DVD on TV - one problem is that pictures and video are not the same (pixels vs. lines, interlacing etc.). I personally have had the best results by importing photos into iMovie and applying a Ken Burns effect to each, but have to say that I don't work much with pictures (mostly video), so you'll probably get other sound advice from other users.
hope this helps
mish

Importing movies from iMovie 6

I followed the instructions in David Pogue's manual "imovie '08..The Missing Manual" but with no results.
I export the movie project from iMovie 6 in QuickTime, however when it appears on the desktop it is in the .mov format, not Quicktime.
So when I try to import it to iMovie '08 the project is on the desktop, but is dimmed.
I then tried to save the desktop movie (save as) in Quicktime, but the same thing happens. I can't figure out what I am doing wrong.

If you have any intention of creating DVDs from those projects, according to what I've been reading, don't do it. Use iMovie HD 06 and iDVD 09 to create your DVDs.
I've read that iMovie 09 is fine for posting videos online because of how it treats the export but 06 is the way to go to create content to be viewed on a TV.
I've read about this on these Apple boards and these boards: http://forums.macrumors.com/forumdisplay.php?f=80

What's the best format to import in to iMovie?

Okay, here is the situation, I have a lengthy Keynote presentation which I plan to export via QuickTime so it can be imported in to iMovie in order to do voice-overs. The question I have is what the best format is to use to export from Keynote in order to import in to iMovie. I am obviously looking for the format which is the smoothest, doesn't lose any quality, and will look clear once imported in to iMovie. Also, there is no reason to use H.264 since size during the transfer doesn't really matter to me, besides, H.264 seems to be somewhat jerky with Keynote exports (or maybe it's just my computer) as I am using some of the graphics intensive transitions and effects.
Also, I know that when you send movies directly from Keynote to iDVD or from iMovie to iDVD, it uses a format which is directly compatible and there is no conversion that takes place, is there a format which will work this way from Keynote to iMovie or does it always have to do the conversion.
Finally, the other thing you should know is that I created the presentation in Keynote using 1280x720 in order to achieve the true widescreen aspect ratio. Now, I am NOT looking to keep this in HD, once I import it in to iMovie, I only need the standard DV Widescreen resolution since I will eventually transfer it to iDVD to burn it as a widescreen DVD. So, I would also appreciate some sort of input as to whether I should export the QuickTime file out of Keynote as the full 1280x720 and then let iMovie do the down-sampling, or should I export it directly out of Keynote using the standard definition widescreen resolution? Please, I would appreciate ANY help on this!!!

Thanks for your suggestion Bruce, however I found another way as well. I finally found that using the full resolution (1280x720) with Apple Intermediate Codec @ 60FPS turns the best results (for a relatively low disk usage). I finally went with the 60 frames per second because I was having problems getting a somewhat jerky output using Current or 30FPS in any format. I realize that iDVD reduces the FPS eventually, but it seems to be perfect when I take that route. Although the jerkiness isn't noticeable on most effects and transitions, if you use the newer transitions like Reflection or Doorway, you will definitely notice a less than perfect playback.
I know that I said that file size didn't matter, but I decided using uncompressed video was just too large, I think the file size was like 25-50GB or something like that. I took forever to import in to iMovie, so I quit with that route.
I really appreciate the Garageband suggestion, that was by far the best way to go. I never really tried using the new GarageBand in iLife '06 so I didn't even realize that it had movie scoring—what a GREAT feature! I definitely should have recorded directly in to GarageBand rather than in iMovie, something is just not right with iMovie's audio handling. Anyway, thanks for the help!

HT2476 new Mac mini, outdated iDVD and iMovie HD with OSX 10.8.2; fix ?

I have a brand new Mac mini and during set up I imported settings from a Macbook running 10.5.8; now the iDVD and iMovie HD apps are outdated and the settings do not allow updates to the current version compatible with OSX Mountain Lion 10.8.2;
How do I fix this?

In my case, the .dmg can only be installed if iLife 08 is installed, so I install iLife 08 (nothing works from that in ML, but it doesn't matter), then install the 6.04 .dmg, and then update the entire iLife with 09 and then 11, running software update in between. At that point, every app works. During that process, the new iMovie versions will be installed and automatically create a previous version folder for 6.04.
Right now I have a Powerbook G4.
I'll be purchasing a new iMac (Mountain Lion) in the coming months. I would like to put both iMovie HD6 and the last version of iDVD on it. I've read numerous threads on the iDVD installation. I'm trying to make sure I understand all the steps to getting both applications installed and working correctly.
I have the install disks for
iLife 08 (says it can install on both PPC and Intel Macs)
iLife 09 (with iDVD)
iLife 11 (older version with iDVD)
I certainly remember disliking iMovie 7 and therefore used the download from Apple to revert back to 6.0.4 on my Powerbook. I did a search and happened to find in my Library an installer package labeled iMovie HD6 (the file info says version 6.0.4 and it's dated Feb 2008). Is this what I would have used to go back to iMovie HD6 from iMovie 7? I also found a ton of other installer packages that I had no idea my powerbook must have automatically saved. Included were numerous iDVD 7 update installers.
So would I take these steps on the new iMac with Mountain Lion?
Use the iLife 08 disk to do a custom install of only iMovie (or does the 6.0.4 installer only work if you've installed the entire iLife 08?)
Run the installer package iMovieHD6 to revert from iMovie 7 to HD6
Use the iLife 09 disk to do a custom install of iDVD
Update iDVD by running the update packages and then using the iLife 11 disk to ensure I get all the themes available for iDVD
Run software update to bring everything up-to-date
I happened to do an install of only iDVD from iLife 11 (iDVD) on another IMac running Mountain Lion and found that I had no choice but to install iPhoto along with it. Since that was an older version I then had to do a reinstall of the current iPhoto from the App store.
Do these steps sound logical?

Importing avi into Imovie, i loose Quality

OK.....
I'm importing avi files from my PC to my Mac. File sizes are around 1.2 GB each. When i import them to Imovie, takes about 10 minutes to, and when the files are imported, the quality is not good. BUT! when i import these files into IDVD and place them in a menu screen on IDVD, they look great! So ? What do i need to do so when i import my .avi video files, i won't loose quality when importing them to imovie. These files are uncompressed and come from a home design software. Please post ASAP with answers i need to resolve this issue for a client of mine. Thanks everyone!
Taylor

Never judge by what you see in iMovie, the playback is bad. Always judge by what you see on a TV (via DV camera or iDVD and DVD player).

Help importing iDVD video

I'm having trouble importing iDVD videos into iTunes (and then into my iPhone) that I made with iMovie and then burned with iDVD. When I try to import it, nothing goes into my iTunes movie folder. I get the sense that there's a problem with the type of file it is, but I'm not sure what to do about it (and haven't seen a similar post here). Thanks-
Dino

If you still have the working file from iMovie, you should be able to save as mp4/aac file (quicktime), instead of working with iDVD file. If you have one of those, it is even better - just drag it into iTunes. If you have non-standard aspect ratio, then you will have to convert it to iPod video somewhere (in iTunes also).
DVD files are in a folder called Video_TS and they need to be ripped using Handbrake or some other software like that so it can be used in iTunes.
It is time consuming, from my perspective, so I don't do it very often...
Cheers

Cannot creat idvd from imovie

pls. assist cannot create idvd from imovie project as it hangs the application on the point of renderring audio files...
what is whrong had been done whithin imovie project then?

My personal worst was a 1 hr 50 min video with 14 imported music clips. Took 42 hours to render, but it got there in the end!
Oh, then 24 hours isn't so bad :-|
What kind of audio files did you use then? I guess it shouldn't make a difference because iMovie converts them to AIF. What sample rate did they use -- 44.1 or 48 kHz? iMovie should convert them to 48 kHz but I haven't checked how well iMovie behaves with imported audio.
Maybe iDVD chokes with overlapping audio clips or when resampling them??
I hope the quality testing of iLife 07 is any better. iMovie 2.1.2 is the last well behaving version!

Error while importing music in iMovie 11 From itunes 10

Error while importing music in iMovie 11
I have the same error explained in a other post which was still left unanswered
I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
after dragging a mp3 into it. When i preview the file in imovie it souds ok.
Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
Is there a solution for this problem?
Former post;
Re: Error while importing music in iMovie 09 from iTunes 09
Posted: Jul 24, 2010 8:08 AM in response to: vincentplaces
I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
There is one icon missing though.
As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
Any help guys?
iMac 27" Mac OS X (10.6.4)

Hi
Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
I do
• In iTunes - collect needed audio into a new Playlist
• then burn this out as an Audio-CD .aiff (NOT .mp3)
• This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
• And then I drag and drop these .aiff files into my movie project in iMovie.
This works Greatly and even more so when I do my DVD.
Yours Bengt W

I need a digital camcorder that imports direct to iMovie - any ideas

I have been using a MiniDV JVC camcorder to import direct into iMovie - worked great but the camcorder heads are now worn out. So I use an Hitachi HD flash card camcorder that outputs AVI files. I then have to convert through Handbrake to get a useable file for iMovie.
This is much too slow as I produce lots of short video for customers - is there a better direct camera to get files straight into iMovie or should I use different software on the mac?
Last resort, I have been told to buy a pc to use for producing edited DVD movies - I don't really want to move off the mac - HELP?

Wow...good question.
Do your FCP setups have capture cards? You could send a signal from the toaster machine to FCP via the capture card and recapture the footage in FCP. Will take a while, but it should work.
Tough working with proprietary formats.
Shane

No sound after importing mpeg from imovie

Hello, i'm new to IMovie and i have the problem that all my video files made with my photocamera loose the sound when i import them into Imovie. the FAQ's tell me it is because they are in mpef-muxed structure. Can anybody help me with the solution on HOW to get my movies with sound into Imovie ???

I have exactly the same problem and took your advice, downloading MPEG stream clip. But it is not clear to me how to do this.
Previously I dragged the MPEG clips from iPhoto ( which played fine in QT with sound) into my iMovie and there was no sound ( as the OP describes).
So if you could spell out the exact procedure, I would be most grateful

Importing clips from iMovie HD to FCE4

Hi. Have read with interest a couple of questions on this same issue, with the advice from Tom Wolsky seemingly being to not mix the two applications and just get stuck in with FCE. However, i'm finding FCE difficult to like/get to grips with. But more importantly, after attending some Apple onetoone sessions, it seems my Canon camcorder might be a little long in the tooth and there may be some tape slippage as I was getting time code errors when trying to import directly to FCE. The fix seemed to be to capture the footage via iMovie and import to FCE using 'show package contents' route. Having now though imported some footage from a second tape, I have some of the clips showing as Offline for some reason. Is the trick to import clips from IMovie as per Tom's suggested route on 9/8/08?

I import video from my camera into iMovie 4, because that is the last version of iMovie, I believe, that was capable of flushing unwanted video off the hard drive, and I can bring an entire tape into iMovie, trim it down for FCE, and then get rid of the unwanted footage. iMovie 6, like Final Cut Express, is a nondestructive editor and can't erase unwanted footage from the hard drive, and as you know, video uses up hard drive space FAST. To get rid of discarded edits, you either have to use iMovie 4 or Final Cut Pro.
iMovie is also much easier to import video into than Final Cut Express, with all the latter's complicated controls. With iMovie, you just plug in your camera, iMovie then says "Camera Connected," and you hit Play and Import. Stone simple. Also, in iMovie you can hear the audio as it comes in, and if I remember right (it's been a while since I did it in FCE), you can't hear your audio tracks as your video imports into FCE. Not a big deal, but an annoyance.
Once the video is in iMovie, then I cut and trim the video to get rid of all substandard/unwanted stuff, and then Empty Trash, which erases the unwanted video off the hard drive, saving mucho space over the course of a project. Otherwise, you're just stuck with the unwanted video, and all it does is fill up your hard drive. Then you export (or "Share," in iMovie parlance) your video from iMove as a QuickTime movie, and drop that QT movie into Final Cut Express's Browser. Then create your FCE project from it.
The only objection I have ever seen to this procedure is people complaining that their QuickTime movie from iMovie has to be rendered in FCE before FCE can use it, and this takes a bit of extra time. Well, that's true, unless you export your video from iMovie in a form that FCE can use natively. Then it doesn't need to be rendered at all--it's just as though you had imported it from the camera directly into FCE. Most people don't know how to set up iMovie to do that.
Here's how I do it: (this is iMovie 4; I assume other versions are the same), Select Share > QuickTime and choose Expert Settings. On the next screen, select Export: Movie to QuickTime Movie, and click the Options button. In the Movie Settings window that this brings up, on the upper (video) part of it, under the Video checkbox, click the Settings button there, and for Compression Type choose DV/DVCPRO-NTSC, and under Compressor Quality, move the slider to Best, and click OK. Under the Sound checkbox, click Settings, and then choose Linear PCM, Stereo, and 48.000 kHz for Sound Settings. Under Render Settings, choose Qualty: Best. Just below that, uncheck the "Prepare for Internet Streaming" box. Then click OK, and the window will go away, and you're ready to export.
Give the video a name, and a place to save to, then click SAVE. The QuickTime movie that results from this can be dropped straight into FCE and requires no rendering; it works just as though you had imported it directly into FCE from your camera.
Tom B.

Import idvd to imovie

Similar Messages

Maybe you are looking for