Import image ? and preview set up?

I noted after importing my images from my disk f(to Lr5) that some floral images were missing. Luckily they were on my backup disk so i moved these floral images from my backup disk to the proper floral folder in my int. disk f. Now how do i import these new images that are located in their particular floral folder which are indeed there. Also how do you set up these new files to do a preview setup. Thanks for your help. I did try to import these new images,but lightrm would not let me do it because it grayed out the images telling me that we noted some duplicate images here. Yes, i did see a few dups of these images in the floral file. If i deleted these dups under its proper folder in disk f shouldn"t lr5 let me continue the import? Thanks for being patient with me ,but lr does not seem to be user friendly for newbies to set up!(my opinion)

Luckily they were on my backup disk so i moved these floral images from my backup disk to the proper floral folder in my int. disk f. Now how do i import these new images that are located in their particular floral folder which are indeed there.
In Lightroom, File->Import, select "Add" at the top, and then over on the left, select the folder where these photos are located, then click on Import
Also how do you set up these new files to do a preview setup.
I do not understand the phrase "preview setup". This is not a Lightroom term that I have ever heard before.
If i deleted these dups under its proper folder in disk f shouldn"t lr5 let me continue the import?
Just the opposite. You could (I don't recommend this, but you could) delete the photos from within Lightroom, and then re-import them. But you don't need to delete and then re-import them, just leave them in Lightroom. Less work.
Thanks for being patient with me ,but lr does not seem to be user friendly for newbies to set up!(my opinion)
In another recent thread, I have advised you to view some introductory videos and learn the basics of Lightroom. I also cautioned you that we have seen in these forums people who stubbornly move ahead determined to figure it out on their own, rather than take the time to learn the baciscs of Lightroom, and the results are often unpleasant. You are struggling with the very basic tools of Lightroom, and the introductory videos would get you up and running a lot faster than your current pace.

Similar Messages

Imported images and processed in wrong project can I transfer?

imported images and processed in wrong project can I transfer to the correct project and delete from the incorrect project without loosing my work so far?
ok I know similar questions have been asked but I could not find an answer using search.....so any ideas... all help is really appreciated.
(In aperture 2)

Sorry I er 'cough' have just dragged and dropped from one project to another, and er well you see er that seems to have done it!images removed from first project and now appear in second correct project.
I am sure I tried that before I posted..

I'm involved in fashion and would like to know which Adobe program would be suitable for importing images and my company logo to design fabric and send as image to fabric printers? Thanks

I'm involved in fashion and would like to know which Adobe program would be suitable for importing images and my company logo to design fabric and send as image to fabric printers? Thanks

Adobe Illustrator. Your company logo should be a vector file. Image files can be "Placed" in Illustrator. Artwork created for printing can be drawn in Illustrator and saved as .ai, .eps, and .pdf files which can be imported into your printer's RIP. But, check with your print vendors and see what they require. This does not rule-out Photoshop, however Photoshop can be limited. So, it would be a good idea to have Photoshop and Illustrator loaded in your workstation with Illustrator being the go-to application.

Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

If the images are not identified as missing ... then you can't reconnect them
But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

RAW image and preview dramatically different

I'm using Aperture 2.1 and am recently finding myself extremely unsatisfied with the rendering of my RAW images created with my Nikon D50.
I am shooting in just RAW (NEF) and sRGB, and am exposing for what I am seeing on the back of my camera. At times I use manual, and others I use the Program setting with a -1.3 exposure compensation since the camera leans too bright; I seem to recall everything exposing correctly until recently. But my memory is shoddy when it comes to how things previously appeared.
The preview before importing shows much the same image that I intended (exposure-wise), as does the quick preview for a second or so during the import process. Shortly after, my pictures all become dull and dark, lacking color and appearing about 2 stops underexposed.
I love photography, but am personally baffled by the issue of color profiles, RAW images JPEG previews, and all that jazz. Nothing seems to explain these adequately, which is why I'm reaching out to those more knowledgeable than me. I am unsure if it's my camera, Aperture, color spaces, or just settings within Aperture or my camera.
Once again, I want to say this is a recent problem, but it may just be that I only noticed recently.

I have exposed to the image on the LCD before and produced wonderful results. Or, at the very least, results that didn't drive me to post on a discussion board.
As per your questions:
--I use 4 different methods to determine how I am exposing my image. In Manual, I use the TTL metering chart in the viewfinder (usually exposing -0.7 to -1.3 so as to compensate for the tendency for the camera's meter to overexpose), the resulting image on the LCD, the histogram, and the in-camera highlights indicator (since, once again, it has a tendency to try and overexpose an image). In Priority modes, I use the camera's exposure compensation setting to set the compensation to -0.7 or -0.1. The resulting JPEG that I see in the pre-import thumbnails and the brief seconds during import are exactly the exposure I want, but when Aperture finishes importing, it's entirely too underexposed. And it's not just that-- the color seems to be worse than it would if it were just simple underexposure... it all feels grey.
-- I use matrix metering most of the time, with spot metering in the rare instance that requires more precise measurement than just tweaking the aperture or shutter up or down a stop or so. Snow or water pictures are a prime example.
Just so we're clear, I know how to use a camera. I know how to expose properly, and in the past year with my camera, I feel I've figured out its quirks. It takes a lot to drive me to discussion boards, as I usually figure out problems myself. But, since the lingo and strange things of digital photography (Color Space, EXIF data, RAW conversion engines, etc.) confuses me sometimes, I am looking for more human help. I haven't had this problem (or this dramatic of a problem) in the past.
The RAW images outside of the last couple of months seem fine (maybe having something to do with the fact that I upgraded to 2.1 from the 1.0 software about 6 months ago and am finally getting back to photography during my summer break). And the JPEGs that I am apparently exposing for are fine as well. It's just after Aperture imports the RAW file that I am having these problems.
Like I said, I want to continue to use RAW. I want it to work like I thought it was working in the past (that is, without major exposure headaches). But I want the image that I thought I was getting. So how do I make Aperture see the same (or nearly the same) image that I am seeing in the JPEG thumbnail? The difference is just too dramatic to pass it off as quirks and be okay with that. And no, at least as the photography part goes, I do not think it's a short between the floor and the camera.

My photoshop CC has suddenly stopped importing images and twain imprt too

Hi I have a subscription to creative cloud. My photoshop cc has stopped importing images.
When I try to bring an imagin into a PS layer PS suddenly quits on me. I windows message
comes up saying PS will now close. What to do?
Upgrade to 2015 or reinstall? Or what...
Thanks,
Joe

Two things to try:
Reset Preferences Hold down Ctrl-Shift-Alt while starting Photoshop and say yes to the reset.
If that doesn't work, Uninstall/Clean/Reinstall.
Use the CC Cleaner here. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
It will delete any corrupt files or registry errors that the uninstaller missed, and then you can re-install.

Import image and set length

hi,
am a long time Premiere and AE user. Currently just testing the trial version of FCP X on a new project. also interested in Compressors distributed rendering.
Q1:
in the intro of a project I am using a clip where I want to blend in the brand logo of a company (tiff or PSD with neutral background) for about 6 secs, and then blend out.
not a big deal in Premiere, just drag the PSD or Tiff in, set the length and blend, and you are done.
How do I do that in FCP? couldn't find a way to set the length of time to display that tiff or psd (they are just fixed in length), and also neutral background was not easy to do.
Q2:
I do a lot of TimeLapse work for clients. for producing TL sequences, I usually just load a TL image sequence into AE, do the deflickering and then render a quicktime clip etc.
how is this done in FCP X? importing a image sequence takes ages and does not lead to any result.
thanks for any tips on both topics.
cheers
chris

Q1.
Select the image in the Event Browser and press 'Q' to apply it to the timeline as a connected clip (or if you prefer to apply the image to the primary storyline, press 'E' to append it to the end of the storyline, or 'D' to overwrite the storyline at the playhead position.
All you need to do then is drag either end of the clip to extend it as much as you want to.
Q2.
'Import' - then check 'Image Sequence' and choose the first number in the sequence of images.
Andy

Importing images and setting longer than 10:00 length

Dear all, I have a very simple question. Whenever I import an image into my project, it is automatically set to length of 10:00. In the sequence viewer, I cannot drag it to make it longer than a certain length of time. So, I end up having to add several copy of the image.
How can I make the image I import have a longer length?
BTW, I am using this image as an overlay ontop of my video.

Import of images is controlled by Final Cut Express>User Preferences>General Tab.
Still/Freeze Duration can be set here to any duration you like.
You should be able to double click your still in the Timeline, it opens in the Viewer. Adjust the duration in the Top Left Timecode box. If clips are either side of the still in the Timeline it may not work as there won't be enough room for the duration to be longer.
Al

Captured & imported image, and driver package not going to DP

I have an image I've imported and even though I've selected "Distribute Content" manually it does not go to DP. I checked everything I could think of (making sure DP was set to service the boundary group, etc.), but it still won't go.
In status, it says "in process".
Question - do I need image/properties/package share settings "copy the content in this package to a package share on distribution points" selected to enable this image to be sent to the DP?
Under Distribution Settings - do I need to select "Distribute the content for this package to a preferred DP..." and any recommendations on if this should be sent to Automatically, Download only changes, or Manual?
Similarly, I also noticed my Driver Package had also not been sent to the DP, so my question applies to that as well. After creation, do these settings need to be selected?
Thank you
Nathan

Hi,
The reason why this happens is a combination of the following two reasons:
- You enabled for prestaged content in the distribution point.
- Go to the properties of the image, on the "Distribution Settings" tab the radio button is set to "Manually copy this content to the distribution point".
Enabling the prestaging option on a DP will tell the DP to not receive content automatically. It is waiting until an administrator copied *.pkgx files manually to it and registers them using extractcontent.exe. That might be useful for DPs at the end of very
small WAN links.
For more infomation, please review the link below:
Operations and Maintenance for Content Management in Configuration Manager
http://technet.microsoft.com/en-us/library/gg712694.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Importing Images and iPad crashes

I am importing about 230 images from my Droid, which is being replaced Thursday by the iPhone 4, but I cant finish because the app crashes. Any ideas?

I had same problem with sd card reading onto my ipad using the camera connection kit. Photos from one camera would import ok but not from the other. I read on another forum where a guy solved it by changing the time format from 12 hour to 24 hour in ipad settings. My ipad was already set to 24 hour format so I did the opposite and switched it to 12 hour. This solved the problem and the couple of hundred photos imported straight away.
Maybe my two cameras are using different time formats, not certain as I haven't investigated further.
Hope this helps.

Import images and rearrange

I want to import a set of lets say 3 images. Among this 2 are of importaance and the third is not. The importance is determined based on the which image is the darkest. And the rest two images should be named as Image-1 and Image-2.
How can I achieve this ?
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

I have developed a VI that says which image is the lowes intensity among the 3 images in a given folder. How can I automatically delete that image from the folder and rename the other two as Image 1 and Image 2 ?
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]
Attachments:
Image intensity - DEV-3.vi ‏58 KB

How to import images and keywords from Nikon PictureProject to LR2?

I have several thousand pictures that I have captured with my Nikon cameras (the present being a D300). I have imported those to my Mac (OS X) using the Nikon PictureProject software. This software has now been discontinued by Nikon, and I have switched to using Lightroom 2 instead. But when I try to import my photo library from Nikon PictureProject all the keywords describing the images are eliminated and I only get a date and number. This is obviously creating a big problem. Nikon has replied that they have no solution to propose! Has anyone else been exposed to the same difficulty? And has some creative person found a solution?
Thank you for your assistance!

Thank you for your help! My wife Marianne who has the problem has used PictureProject in a very special way. She has typed in the keywords on the line where PictureProject gives the basic information about the photo DCS3_7325 for example. Where DCS3 shows it is a digital Nikon camera D300 and the 7325 is the camera's (own I imagine) number for the original photo.
In front of this my wife has written the description of the photos e.g. "Paris bridges Pont Neuf". (And not in the place provided by PictureProject for keywords.)
It has been possible to search the photos by typing in the added words.
Do you think that this additional (not intended by PictureProject) information could be imported to Lightroom2?
Thank you for using your experience to see if this can be solved.
Anders in Paris

How does one import images and maintain the sorting order?

i'm trying to import 59 images (1024 x 768 png files) into keynote. i want them to create a series of image slides with 1 image/slide and keep them in the order i.e. sorted by image file name such as:
image001.png
image002.png
image003.png
and so on.
i've tried dragging and dropping these images onto the navigator sidebar but the images get out of order randomly.
has anyone encountered this? this seems like a bug.
thanks,
matt

hi marcus.
thanks for the suggestion.
while i have not tried your solution yet, i'll bet that it'll work and you're correct, it would be faster than rearranging the slides later. it drives me crazy that what i'm trying to do does not work out of the box. if there's one thing apple promotes in its apps its got to be drag and drop. that this does not yet work is nutty.
good luck,
matt

Importing images and event creation

Hi,
I'm using iPhoto 11 on my MacPro to import a folder of camera images from my Samsung Galaxy (booo! ) that's ive copied to my desktop.
For some reason, iPhoto won't split the shots into events but creates one event with these images giving them the date; 11 Oct 2012 - 3 Jan 2013 ??
I've checked iPhoto prefs and 'Autosplit into events - One per day' is on!?
Is there something i'm missing here? Is it because I'm bringing in some shots from a rival phone??
Would appreciate any advice please.
Tony.

But if the images are timestamped and they are otherwise, iPhoto wouldn't acknowledge that the time spread of the shots is from Oct to Jan, why doesn't it split them?
Huh?
It doesn't split folders imported from the Finder. Many people prefer this. For those who don't, then yes there is the terribly ardous task of selecting the Event then pushing the enormously heavy cursor all the way to the top of the screen, clicking on the menu and then clicking on the command. It's very difficult, I know.
iPhoto menu -> Provide iPhoto Feedback and tell them your concerns.
Either i'm doing something wrong or this is another example of how Apple is dumbing down it's software.
A $15 app that does full lossless processing, raw support, publishing and sharing, managing and slideshows and books cards, facial recognition and location tracking too. Wish every software was as dumb.

Flash CS5 / CS5.5 crashes when importing images, and all of the time

Hi.
I started working on an animation file in Flash recently. It was ok at first, but now it crashes all of the time. It crashes almost 100% of the time when I try to import a sequence of jpegs, but it also seems to crash for no reason at all - when I click on a frame in the timeline, or when I move forward/back through frames on the timeline.
This happened when I was using CS5, so I installed my upgrade copy of 5.5, and that didn't help. I upgraded my computer from 32bit XP to 64bit Window7. I'm now running a fresh install of CS5.5 on a fresh install of Windows 7. It still crashes exactly the same.
I got an error log when I installed the programs. I don't know if it is related. It looks like this:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 8 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.6E45C2P-1017rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Master Collection CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at G:\Adobe CS5_5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at G:\Adobe CS5_5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at G:\Adobe CS5_5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at G:\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at G:\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
----------- Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Kris\AppData\Local\Temp\InstallPlugin.exe, command: -install plugin -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Kris\AppData\Local\Temp\InstallPlugin.exe, command: -install plugin -msi
----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{47CE893F-A0FF-4094-AA16-5209AEA7C7E0}\OEM(Seq 32)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
Thanks very much if you can help me.
~Kris

Hi Tobymare,
5.1.1 is the highest iOS that an iPad 1 can run. If the iPad is crashing, try a reset (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if the crashing issue is resolved.
Cheers,
GB

Import image ? and preview set up?

Similar Messages

Maybe you are looking for