Import (imp) failing with IMP-00010 error

Hi Experts,
I am doing import to Windows from an export dump that was taken on Solaris 10. But the import is failing with the following error.
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
I checked the source and target oracle versions and NLS_LANG parameter.
In both the databases NLS_LANG parameter is set to AMERICAN only. But the oracle versions are different
Source
OS : Solaris 10
Oracle version : *11.2.0.2*
Export dump : exp_CAAU2.dmp.gz (Export taken by zipping)
Target
OS : Windows server 2003
Oracle Version : *10.2.0.2.0*
While importing into windows env, it is failing..
Please let me know the reason why the import is failing?
Can i upgrade the target oracle version to 11.2.0.2 to succeed the import?

Hi,
The IMP indicates this this error is coming from the old imp. This dump file could be from the expdp utility, which would require you to use the impdp utility.
Source
OS : Solaris 10
Oracle version : 11.2.0.2
Export dump : exp_CAAU2.dmp.gz (Export taken by zipping)
Target
OS : Windows server 2003
Oracle Version : 10.2.0.2.0
While importing into windows env, it is failing..
What really matters here is the compatibility level. If your source and target compatibility levels are the same, then with Data Pump, the dumpfile created on the source, would work on the target. If the compatibility levels are different, then use expdp with the version parameter set to the compatibility level of the target.
Please let me know the reason why the import is failing?Check the suggestions above first.
Can i upgrade the target oracle version to 11.2.0.2 to succeed the import?It could help, but first check to see if you are using the right utility and then check the compatibility versions.
Dean

Similar Messages

Import Purchase orders failing with numeric/value error issue

Import Purchase orders failing with numeric/value error issue

Hi All,
Import Purchase Orders program is failing with PL/SQL Numeric or Value Error.
DECLARE
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 55
Kindly help me to get the issue fixed

[SOLVED]linux-headers upgrade fails with PGP signature error

Whe trying to upgrade the linux kernel using:
pacman -S linux linux-headers
it fails with the following error:
(2/2) checking package integrity [#################################] 100%
error: linux: signature from "Tobias Powalowski <[email protected]>" is unknown trust
error: linux-headers: signature from "Tobias Powalowski <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I have tried deleting /etc/pacman.d/gnupg and the recreating it with
pacman-key --init
, I have also run
pacman -Syy
to make sure the repository is up to date. I read the wiki post about time, but my ntp daemon is running, and I have confirmed that my time is exactly right.
Last edited by MikeDacre (2013-04-01 23:32:27)

Hi,
Sorry, but that doesn't help me. I can't find any reference in that post to this problem. I get a similar issue when I try to upgrade mysql:
>> sudo pacman -S mariadb libmariadbclient mariadb-clients 16:06 Mon 04-01-2013
resolving dependencies...
looking for inter-conflicts...
:: libmariadbclient and libmysqlclient are in conflict. Remove libmysqlclient? [y/N] y
:: mariadb-clients and mysql-clients are in conflict. Remove mysql-clients? [y/N] y
:: mariadb and mysql are in conflict. Remove mysql? [y/N] y
Targets (6): libmysqlclient-5.5.30-6 [removal] mysql-5.5.30-6 [removal]
mysql-clients-5.5.30-6 [removal] libmariadbclient-5.5.30-2 mariadb-5.5.30-2
mariadb-clients-5.5.30-2
Total Download Size: 16.85 MiB
Total Installed Size: 152.41 MiB
Net Upgrade Size: 28.51 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libmariadbclient-5.5.30-2-x86_64 6.6 MiB 1479K/s 00:05 [#################################] 100%
mariadb-clients-5.5.30-2-x86_64 871.8 KiB 421K/s 00:02 [#################################] 100%
mariadb-5.5.30-2-x86_64 9.4 MiB 440K/s 00:22 [#################################] 100%
(3/3) checking package integrity [#################################] 100%
error: libmariadbclient: key "BBE43771487328A9" is unknown
:: Import PGP key , "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
error: key "Bartlomiej Piotrowski <[email protected]>" could not be imported
error: mariadb-clients: key "BBE43771487328A9" is unknown
:: Import PGP key 487328A9, "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
(3/3) checking package integrity [#################################] 100%
error: libmariadbclient: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: mariadb-clients: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: mariadb: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.

Windows 2008 R2 backup fails with event 521 error code 2155348001

Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/10/2014 11:28:52 PM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SHAQTUS.scdl.local
Description:
The backup operation that started at '‎2014‎-‎01‎-‎11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
Rick

Hi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8 USB recovery fails with CTOERROR.flg error

Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29

Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

Package failed with run time error: " GETWA_NOT_ASSIGNED".

Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32774).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Regards, Trine

Hi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António

Backup Fails with Invalid RECID Error

Hi All,
Please help me to understand Caution -section
below text is from
[http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
Backup Fails with Invalid RECID Error: Solution 2
This solution is more difficult than solution 1:
To create the control file with SQL*Plus:
   1. Connect to the target database with SQL*Plus. For example, enter:
      % sqlplus 'SYS/oracle@trgt AS SYSDBA'
   2. Mount the database if it is not already mounted:
      SQL> ALTER DATABASE MOUNT;
   3. Back up the control file to a trace file:
      SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
   4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
      # The following commands will create a new control file and use it
      # to open the database.
      # Data used by the recovery manager will be lost. Additional logs may
      # be required for media recovery of offline data files. Use this
      # only if the current version of all online logs are available.
      STARTUP NOMOUNT
      CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS ARCHIVELOG
      -- STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
          MAXLOGFILES 32
          MAXLOGMEMBERS 2
          MAXDATAFILES 32
          MAXINSTANCES 1
          MAXLOGHISTORY 226
      LOGFILE
        GROUP 1 '/oracle/oradata/trgt/redo01.log' SIZE 25M,
        GROUP 2 '/oracle/oradata/trgt/redo02.log' SIZE 25M,
        GROUP 3 '/oracle/oradata/trgt/redo03.log' SIZE 500K
      -- STANDBY LOGFILE
      DATAFILE
        '/oracle/oradata/trgt/system01.dbf',
        '/oracle/oradata/trgt/undotbs01.dbf',
        '/oracle/oradata/trgt/cwmlite01.dbf',
        '/oracle/oradata/trgt/drsys01.dbf',
        '/oracle/oradata/trgt/example01.dbf',
        '/oracle/oradata/trgt/indx01.dbf',
        '/oracle/oradata/trgt/tools01.dbf',
        '/oracle/oradata/trgt/users01.dbf'
      CHARACTER SET WE8DEC
      # Take files offline to match current control file.
      ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
      ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
      # Configure RMAN configuration record 1
      VARIABLE RECNO NUMBER;
      EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
      DEBUG 255');
      # Recovery is required if any of the datafiles are restored backups,
      # or if the last shutdown was not normal or immediate.
      RECOVER DATABASE
      # All logs need archiving and a log switch is needed.
      ALTER SYSTEM ARCHIVE LOG ALL;
      # Database can now be opened normally.
      ALTER DATABASE OPEN;
      # Commands to add tempfiles to temporary tablespaces.
      # Online tempfiles have complete space information.
      # Other tempfiles may require adjustment.
      ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
      # End of tempfile additions.
   5. Shut down the database:
      SHUTDOWN IMMEDIATE
   6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
      STARTUP NOMOUNT
      CREATE CONTROLFILE ...;
      EXECUTE ...;
      RECOVER DATABASE
      ALTER SYSTEM ARCHIVE LOG CURRENT;
      ALTER DATABASE OPEN ...;
Caution:
      If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.

Please help me to understand Caution -section
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
Rgds.

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Background job failing with license check error

Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = XX1
Read message server host
       ok, host = hostname
Read message server service port
       ok, service port = sapmsXX1
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = T0343073854
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
        installation no: key:
        userlimit: 0 productid: R3_BASIS
        system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay

@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = XX1
Read message server host
       ok, host = host
Read message server service port
       ok, service port = sapmsXX1
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = T0343073854
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
        installation no: key:
        userlimit: 0 productid: R3_BASIS
        system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login.

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-Walt

Yes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt

Job is failing with the following error- Error calling a method of the tree

dear SDNers,
my question is where do i need to look for error.
Will this be an ABAP issue?
Please guide
DETAILS
In SM37 when we see the job XYZ, we get the following details.
   Job                              Ln    Job CreatedB    Status          Start date     Start time      Duration(sec.)     Delay (sec.)
XYZ                                                                    Canceled        16.11.2009    10:11:30                  9                         27
When the job log is checked this , we get the below details.
The job XYZ is failing with the following error.
Date      Time     Class No.   Message
+----
+----
2009/11/16 05:03:01 | 00     516 | Job started
2009/11/16 05:03:01 | 00     550 | Step 001 started (program RBDMON00, variant
SBCI287, user ID ABCDEF)
2009/11/16 05:03:03 | TREE_C 000 | Error calling a method of the tree control
2009/11/16 05:03:03 | 00     518 | Job cancelled
Equest your assistance in knowing where to find the error for this.
I have no clue as to where and how i need to debug or where i should i be looking for error.
In BD87, the selection screen paramters that are given are changed on date (from and to) and IDOC status 51,66,69 and 64 and the message type is "Öutbound interface of picked shipments"
Please guide.
Regards,
SuryaD.
Edited by: SuryaD on Nov 23, 2009 5:36 PM
Edited by: SuryaD on Nov 23, 2009 11:14 PM

> 1. There is a job name ABCDEF
> 2. When this job is run then the status shows cancelled and the job error log shows tHe details that "error calling a method of the tree control"
> 3.ThIs error also points fingers to /link to BD87 as seen in the job log " (program RBDMON00, variant \SBCI287, user ID KRISF)"
>
BD87 is an IDOC processing.
> My question to you Sampath.
>
> in order to answer your question on whether it is ALv or SALV.. please tell me as to how will i know which progrm is associated with the job ABCDEF?
>
Go to sm37 - double click on the job that was failed - Click on Step (on application tool bar) to get the program name - double click on the program name - new popup will be opened - then copy the program and variant
Go to se38 - enter the program - execute (F8) - choose the variant that is there in the background job - run in forground first
if the run is good - then check the program - SE38 - Display the program then see
I just saw the above message BD87... .if that is true, you dont have to do all these
I dont think it is possible to schedule a job with BD87. Is this the first time or is any job completed without errors for this?

BRBACKUP fails with 'BR0301W SQL error -980 at location BrbDbLogOpen'

Hello mates,
BRBACKUP on our Portal systems fails with the following error:
EP Version: 600
Platform: HP-Unix (ia64 hp server rx7640)
Oracle: 920_64
BRTOOLS 6.40 (40)
BR0301W SQL error -980 at location BrbDbLogOpen
BR0324W Insertion of database log header failed
Here is the exerpt from the logfile:
==============================================
BR0051I BRBACKUP 6.40 (40)
BR0055I Start of database backup: bdyxzsml.anf 2008-10-01 08.04.51
BR0477I Oracle pfile /oracle/GGF/920_64/dbs/initGGF.ora created from spfile /oracle/GGF/920_64/dbs/spfileGGF.ora
BR0925I Public synonym SAP_SDBAH created successfully for table SAPGGFDB.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPGGFDB.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPGGFDB.MLICHECK
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrbDbLogOpen-5
ORA-00980: synonym translation is no longer valid
BR0324W Insertion of database log header failed
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0319I Control file copy created: /oracle/GGF/sapbackup/cntrlGGF.dbf 8052736
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrDbfInfoGet-30
ORA-00980: synonym translation is no longer valid
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrDbfInfoGet-31
ORA-00980: synonym translation is no longer valid
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301E SQL error -980 at location BrComprDurGet-1
ORA-00980: synonym translation is no longer valid
BR0314E Collection of information on database files failed
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrbDbLogOpen-5
ORA-00980: synonym translation is no longer valid
BR0324W Insertion of database log header failed
BR0056I End of database backup: bdyxzsml.anf 2008-10-01 08.04.51
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0054I BRBACKUP terminated with errors
============================================
I am not able to find any relevant solutions in SMP so far.
Please help find a solution.
Thanks & Regards,
Manoj

Hello ,
Am trying to take the online backup using brtools in my portal server but giving below error:
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: bdzqskqc.and 2009-01-08 17.44.50
BR0484I BRBACKUP log file: /oracle/EPP/sapbackup/bdzqskqc.and
BR0477I Oracle pfile /oracle/EPP/102_64/dbs/initEPP.ora created from spfile /oracle/EPP/102_64/dbs/spfileEPP.ora
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108174450', 'and', 'EPP', ' ', '99
, ' ', 'bdzqskqc', '# 0 0 0 0 0 0 0 ALL online
disk ---k-c 7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0319I Control file copy created: /oracle/EPP/sapbackup/cntrlEPP.dbf 7397376
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrDbfInfoGet-32, SQL statement:
'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20071205000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrDbfInfoGet-33, SQL statement:
'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20071205000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301E SQL error -1031 at location BrComprDurGet-1, SQL statement:
'OPEN curs_6 CURSOR FOR'
'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DC
OR FUNCT = 'DCM') ORDER BY FUNCT'
ORA-01031: insufficient privileges
BR0314E Collection of information on database files failed
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108174450', 'and', 'EPP', ' ', '99
, ' ', 'bdzqskqc', '7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0056I End of database backup: bdzqskqc.and 2009-01-08 17.44.50
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0054I BRBACKUP terminated with errors
Please suggest/guide
Regards,
AMS Team

Import (imp) failing with IMP-00010 error

Similar Messages

Maybe you are looking for