Import in 3.2 does not show up in 2.7

I am running both right now...ie I have not deleted 2.7 until I am comfortable with 3.0
I just imported photos into 3.0>  I opened 2.7 to see if they are there and they are not.  If i decide to return to 2.7 will I be able to bring over the new photos or should I import them twice now.
thanks

Since 3.x made a copy when it upgraded your catalog, it is completely seperate.  You would have to import twice (but you can use 'add' on the second one instead of copy or move), but you won't see any of your edits in the other one.  If you write out the xmp sidecars, you will see the _results_ of your changes, but you wont' see the edit history, etc.
it's better to pick one, as the other poster said.  Hopefully you're on 3.2?
Cheers!

Similar Messages

  • Artwork Import Corrupts File and Does Not Show in iTunes

    I recently loaded some files into iTunes that I received as MP3s. After importing them, I attempted to add artwork. The artwork showed up originally, but everytime I went back to play the song, the artwork would disappear. And, each time I attempted to add the artwork, it caused the song to loop at the beginning. In other words, a 20 second or so snippet would play multiple times before the song would play. This appeared to corrupt the file in that the same thing would occur no matter what file I used. I thenreimported the raw files again, did not add artwork, and they played fine. As soon as I attempted to add the artwork again, the looping problem occurred again. I have used iTunes for a long time, and have never had a problem adding photos to my iTunes or my iPod.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I cannot import photos as Finder does not show the flashdrive. Using OSX 10.9.4

    importing photos from a flashdrive

    Hello ,
    Thanks for using Apple Support Communities.
    Make sure you have the view option for external disks enabled in your Finder preferences:
    OS X Mavericks: Finder preferences
    http://support.apple.com/kb/PH14046
    Take care,
    Alex H.

  • I imported photos but the event does not show

    I imported photos today, it shows up under "Last Import" but the event does not show under "Events", how do I fix this?

    What version of iPhoto are you running? Also is your profile correct?
    In the Events mode set the View ➙ Sort option to By Date ➙ Descending so that the newer events are at the top of the window.
    OT

  • IOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange. Any solutions?

    iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
    Open the VCS file, this will create a Calendar entry in your Outlook,
    Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
    Delete original VCS-created appointment in your calendar to avoid multiple calendar.
    Open the re-saved ICS file.
    Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
    If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

    iOS 7 Calendar does not show appointments imported as VCS files in Microsoft Outlook / Exchange in Windows 7. I discovered this when downloading itinerary.vcs files from Delta to mark flights in my calendar. The work around I found is as follows:
    Open the VCS file, this will create a Calendar entry in your Outlook,
    Open the created Outlook Calendar entry, go to File -> Save As and then select to save as ICS file.
    Delete original VCS-created appointment in your calendar to avoid multiple calendar.
    Open the re-saved ICS file.
    Appointment will now correctly synchronize with your iPhone iOS 7 calendar.
    If anyone has better alternatives to this process, please help out. Hopefully, Apple will fix this with the next iOS update.

  • ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

    Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

    Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
    Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning.  I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer.  How or why it now works is a total mystery.

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • When I attempt to import a CD the CD does not show up in itunes

    I put a CD into my drive and the CD does not show up in itunes. As a matter of fact there are no import cd buttons in my itunes or in my file tabs. At first it was saying it was locating it but now nothing happens. I did get a new computer a month ago. I never had this problem before.

    What format are the tracks?

  • A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip:  So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email come

    A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip:  So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email comes through empty. Please help.

    Copy that voice memo, create a new email and paste it and send it to yourself! You can save it to your computer now and send it to someone else

  • ARQ: Role Import does not show roles in the preview

    Dear All,
    Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
    I implemented SAP note#1897975 Role import does not show roles in the preview.
    Still facing the same problem. Has any one faced this problem? Please suggest.
    Regards,
    Faisal

    HI Faisal,
    This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
    Regards,
    Neeraj Agarwal

  • I am not able to import a audio CD the import window does not show up

    I am trying to import a music CD but the import window does not show up and the cd does not copy into itunes.

    Hello Kathryn,
    Thank you for the details of the issue you are experiencing when trying to import songs from a CD.  I recommend following the steps in the section titled "If you have trouble importing songs from an audio CD" in the article below:
    iTunes 11 for Windows: Import songs from CDs
    http://support.apple.com/kb/PH12486
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

    I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

    Have you already confirmed that you trust the computer?
    Launch iTunes, then connect your iPhone to the computer.
    When prompted, confirm that you trust the computer.

  • IPhoto 9.4.2 does not show mp4 movies to import from SD Card

    Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
    If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
    What could be happening to my iPhoto?
    Thanks in advance.

    but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
    Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader?  Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
    OT

  • IPhoto does not show last import

    iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

    Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
    LN

Maybe you are looking for

  • Adding a button before the TOC button in a WebHelp Pro navigation bar

    My client wnats to add a "Home " button to the left of the TOC button in the navigation bar. I can ad buttons to the right of the "standard buttons": TOC, Search, Print, and Glossary, but even if I go and edit the skn file and add the "Home" botton b

  • Problem Downloading Trial Version of Lightroom 4 from Adobe Site

    Problem dow I am having problem downolading a trial version of Lightroom 4 from the Adobe site. It appears that I can download trial versions of any other digital photography-related product but not of Lightroom 4. About 2 weeks ago I downloaded the

  • BSP-BW data transfer

    hi all, i need to pass the data from selection screen of bsp to bw report. BSp has parameter cre on selection screen whose value is stored in l_creid variable. i need to pass the value what user enters in this to run bw report which has the same fiel

  • Delete Document from SAPSCRIPT Repository

    Hi all, i want to delete a document from SAPscript Repository,  i have only the document ID, what shall i do to handel this problem? i have aslo used the FM BDS_DOCUMENT_DELETE but it says NOTHING_FOUND is there a way to so? BR

  • Failure after software update

    Have just downloaded latest updates to itunes and and OS X security update 2011-006 and my macbook pro crashed and died.  Had to restore from back up as repair disk did not work.  Four hours!!!!! Luckily I had taken recent back ups but this is downri