Import in progress (97%)... Please wait
Hi all
I created a portal Transport { epa file } from my development system and imported the
same successfully into my IT system
I again tried to import the same EPA file into my QA system where , the import wasn't successful nor fail.
Once I click on the import button ( with Override option set to ALL ) , the import begin as normal and proceed
to different level..... say from 10 to 20 % and then to 45% and finally it reach 97% , at which it keeps on spinning..
<h3 > ** Import in progress (97%)... Please wait ** </h3>
I tried the option of importing the EPA file from server as well as from local client , in both case i see the same behavior.
Any pointer over this would be really helpful.
Thanks
Hi Kumar,
I've got the same issue.
This only happens with transport packages which contain remote objects from a Producer Portal.
Have you found a solution for this?
The behaviour is that when you import a transport package, it seems to lock all objects at runtime when importing.
Thanks very much for reacting!
Kind regards,
G. Leurs
Similar Messages
-
Hi I was in the procces of uploading photos from my phone three days ago as i have an important art project to finish today. I have tried to restart my computer log off come back on but every time i put my phone to the computer and press up load photos its comes up with "Photos are baeing import to photo library- please wait for import to complete".
There are 90 photos and this came after it uploaded a few - can you help me - i have tried to quit iphone but this keeps coming up and i need these pics imported from my phone to my computer.
please help
thank youApple menu ==> forec quit
LN -
I have tried turning off iclowd and other things that would automatically upload photos but that still didnt work. I can not upgrade my computer because it wants to restart the computer, but iphoto stops the shut down process. It says I need to wait for the download to complete. But I can not find anything uploading. please help.
It has said this for about a month now and I would just hide iPhoto since I could not close it. I have not needed to turn off my computer until now. But now it is a problem because I can not upgrade my computer
-
I plugged my phone in and I'm trying to upload photos like I usually do but iPhoto is saying "Please wait for import to complete". It won't let me close iPhoto or anything. Help please!
apple menu ==> force quit
LN -
My Mac laptop IPhoto is "stuck" on a screen that says, "Please wait for import to complete." I can't get it to complete the task. What do I do next?
Force Quit the app. It's under the File menu.
-
Hello All,
I was getting a numbered error message and followed the instructions on: http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Error-Code-0x8004fd2b/td-p/96430, as it had worked for everyone else on that thread. Unfortunately for me, it caused a different problem (and I'm still not able to sych).
Now when I go to sync, it says: "your organizer data isn't configured for sychronization" then it says "click configure to ..." but when i click configure, and then click configure settings (under synchronization settings in the organizer tab) , it just says "operation is in progress. please wait" but after 1 second it stops and nothing else happens.
I just went from 5.0 to 6.0 thinking it would help, but no luck. T-Mobile customer support is of no help. Ive been working on this for 3 days now, if somebody could help, that would be really greatly appreciatedPlease take a look at Running Nested VMsRunning Nested VMs which contains the information required to run virtual ESXi hosts. It's likely "Expose hardware-assisted virtualization to the guest operating system." which is missing in the ESXi VM's configuration.
André
PS: Discussion moved from vSphere 5.1 to Nested Virtualization -
I tried to import 2 photos from an email to iphoto. The photos now appear in iphoto as the latest imports, However, when I try to close iphoto or log off of my computer, I get a message box that says, " Photos are being imported to the photo library. Please wait for the import to complete."
I can't get out of iphoto or log off of my computer, or turn the computer off. How do I stop the import or log out of iphoto???Try Force-quit from the Apple-menu to close iPhoto.
-
there was an error importing some photos from my iphone, and since then I can not close the program ... it gives the mesage 'please wait until import is conclued'...but nothing is being tranfered. Any help ? Iphoto version 9.5.1
Force Quit the application from the Apple menu.
-
I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from. How do I get it to proceed?
After Force Quitting, as LarryHN recommended,
Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
Then launch iPhoto again.
If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them. -
Please wait, Preload Customizations in progress.....
Hi,
Recently, my hard drive died on my T61 ThinkPad. I have received a new hard drive from Lenovo and having followed all the instructions to install the 4 recovery DVDs that came with the hard drive, I have now reached a stage where the screen reads:
"Please wait, Preload Customizations in progress.....". Now I do realise that this process is very time consuming but can someone reassure me that nothing is wrong and I should be prepared to wait for as long as it takes?
Any help will be highly appreciated.
Many thanks,
DadziAs far as I can tell from my experience depending on your hardware it may take arounf 3 hours or more.
Hope everything is allright wiht your machine as I write.
Cheers!
ThinkPad T500 2242-CTO P8600 / 4GB RAM / WSXGA+ / HDD Fujitsu 7200rpm 1TB / 6 Cell Sony / Windows 8 Pro 64-bit
ThinkPad Tablet 2
ThinkPad X61s 7669-3KG Windows 7 Home Premium 32-bit -
I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing. -
Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: 00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon. -
Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
Problem
Please wait message when opening form created by Adobe LiveCycle Designer ES 9.0
Full message
Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html. For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S
Actions
Updated Windows RT 8 to 8.1
Uninstaled Adobe Reader Touch 1.3 and instaled 2.0 Build 84770
Additional Information
The form was created 10 or 11 months ago, and we are pretty sure that we were able to open it a while back
The same PDF file opens just fine in Windows 8.1 using Adober Reader XI 11,0.06, it is only the app that is affected.
The document cannot be opened by any other mobile app that we have tried or on another mobile OS (iOS)
Any ideas?
Thanks & Regards
JimThe user's assertion is surprising to me, but perhaps I'm missing something important. I thought the correct position was from the conclusion of my earlier post "it can't be done". Adobe state their Reader Touch doesn't support XFA (http://blogs.adobe.com/readermobile/2012/12/13/adobe-reader-for-windows-8-tablets/). Unless (see that blog entry) you changed the type of form.
-
"Project "name of project" is in an inconsistent state. Please wait...
I seem to be encountering a slight issue with Aperture, where it 'hangs' a dialog comes up (this has happened twice on 2 seperate occassions) where the dialog explains :
"Project "name of project" is in an inconsistent state. Please wait while the inconsistencies are resolved."
there is a cancel button, but it is greyed out. the progress bar is turning, but no progress is indicated. it stays like this and has done for a while. the only thing to do is force the app to quit and restart.
has anyone else had this happen or does anyone know why it is doing this?
I look forward to some replies.
Paul.I had something similar happen and the easiset way for me to fix it was to go into the aperture library (right click, select show contents), locate the project in question and trash it.
One thing you need to make sure is that Aperture isn't running. When it starts up it may notice an inconsistancy with the database and rebuild it. Once done (takes only a few seconds) you're all set.
just in case, backup the file, either by copying it to another drive or folder.
Mike -
Maintenance Wizard appears to hang: Execution Started: Please Wait
I have a customer using the following navigation route through Maintenance Wizard:
Process: Prep for Upgrade
Select: Task:Apply AD Minipack
'Start the Run'
However the next page seems to hang with:
Script Executer: Execution Started
'Confirm that "Execution Complete"message appears at the end of this page.'
Please Wait.
Can anyone advise what could be the problem or how to get additonal errors to diagnose the problem.It took about 8 seconds for me. Not too bad at all.
Jo
"crazykeith" <[email protected]> wrote in
message
news:g0c7rs$d27$[email protected]..
> Hello. I'm trying my first Flash Video insertion..all is
well except I'd
> really like to be able to tell anyone viewing the page
to please hang on
> and
> wait during the buffer period on the progressive
download. it takes
> anywhere
> from 5 to 20 seconds for the player skin to appear and
start playing the
> video.. I have previously been using embedded WMP which
seems to have an
> advantage in this department since the player skin would
immediately
> appear and
> display a buffering video % which would let anyone
viewing the page know
> that
> the video is downloading and is about to play. With the
flash they have
> no
> idea and the page appears not to be working for a "long"
time (5 to 20
> seconds)
> since not even the skin appears. Is there a way to
improve these faults?
> My
> video is about 3 minutes long and can be found here.
>
http://www.centroidcnc.com/cncvideo/cnc_cylinder_head/cnc_cylinder_head_porting.
> html
> thanks ahead of time for any advice! -Keith
>
Maybe you are looking for
-
Does anyone know where Safari might hide old security certificates?
In a vein similar to the questions of where Safari is getting the data for the url address autocomplete, does anyone know where Safari might hide an old security certificate? Apple Care could not help me, and the their final suggestion was to reinsta
-
ITunes reorganised my music files?
Hi there The folder storing my music files has been re-organised by ITunes (newest version). It divides my tracks by artist into folders. All of my compilations have been divided into separate folders - is there any way I can get Itunes to organise m
-
How to set *all* of desktop settings with GPO
Using Server 2012 standard with Win 7 32-bit domain members. Client has a custom designed logo that centers on the screen as desired, and I can set this up with GPO, no problems. However, I can't find anywhere in GPO where I can specify the desktop b
-
Steps to configure Oralce 9i Data Guard
Hello, I am looking out for a document that has step by step instruction how to set up an Oracle 9i Dat aguard in Maximum Performance mode. Can someone kindly point me to an existing document. Thanks..RCube
-
HT5449 This is totally out of date. How would I do this with the current software?
I don't have dictation and speech. I only have speech. Help!!