Import in Ultrabeat Doesn't in 7.0?
I wa browsing the forums and came across this post when I was reading up on importing samplesinto Ultrabeat:
http://discussions.apple.com/thread.jspa?messageID=1720791�
One of the posters indicated that the import function in 7.0 doesn’t allow for importing but 7.01 does? Is there any validity to this? I have an Academic version, 7.0 I’m pretty sure, and have had some difficulty importing drum samples into Ultrabeat. I am running a Dual 1.8 G5 with Tiger.
Well, I just bothered to look at the updates page, which I never bothered to do, and saw the Ultrabeat changes.
Updates are good...
Similar Messages
-
I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks -
I updated imovie, which is now totally different. I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos. Clicking on "close" doesn't work. How do I get out of "import" and then how do I access iphoto?
I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??
ps
i got a backup for the files but even if they are on the mmc, when camera is connected fcpx doesn't see them. if i try to import a new shoot it works!!Thx a lot Salty. As you suggest I found other staff on support pages. I deleted AVCHD structure and kept only .mts... Now what I need to do is to convert those files with handbrake or similar tool in .mp4 or .mov to make them digest to FCPX.
-
I just bought an iMac and I´m a new User of Mac. I captured my data and my country is Mexico. What can i do if the final data check of Mac shows Spain? Is it important or it doesn´t matter?
Hola & welcome to the Forums!
Have you noticed any problems, like Time zone or Time display? -
I have a family video DVD that was originally on tape, but is now on disc. I want to import it onto my MacBook to edit and store. However the files are IFO, BUP and VOB and the Mac is saying 'unable to import' as it doesn't recognise the file. Help please !!!!!
Those are the constituent parts of a standard mpeg2 DVD. Storing them is easy: just copy the folder to your hard drive and they will play in DVD player or VLC.
But that format is not intended for editing. To do so:
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7. -
Import Design Object doesn't work
Hi people.
I have a PI 7.11 and I'm trying to import in quality environment a particular software component from development environment... and this operation seems doesn't work. The transport is via file.
The SC was already existing and I'm trying to transport a simple mapping change.
The import in QLT reports succesfully the same number objects exported in file but no change is visible in mapping in QLT.
I tried to refresh all kind of cache in java and abap; restarted java stack but nothing change.
Instead, the import of other SCs in QLT works fine.
Some ideas to help me?
Ciao.
NicolaHareenkumar,
at the end I solved the problem thanks to yours suggestion.
The problem was a mapping conflict in DEV environment for a map change made by another user.
Unfortunately, it was been not enaugh to solve the conflict but I have had to delete entirely the SC before to be able to import the package.
Thanks to RaviBabu too for his suggestions.
Ciao. Nicola -
Import from card doesn't seem to work
I am watching a training video from Lynda.com on FCP X and in that video it shows that when importing media from a card as soon as the card is connected an import window pops up with many useful features. The trouble is that that window never appears for me. I am shooting with a Canon 5d and recording to a compact flash card. Lemme guess, this doesn't work for the 5d?
Andy,
There are other recent discussions on this very topic with the 5D. Look for them on this forum. I own a T2i. You can get the files, just not maybe in the way your are looking for. The mov files that the Canon DSLRs record should be able to be brought directly in. So, IMHO, you can simply copy the files from your card to a folder on your drive then use the FCP X File menu command to Import ... Files to get them. Still, I am working from vague memories of what the resolution was. Check the discussions by searching the forum for 5D. Best wishes.
stephen -
Music of imported pps files doesn't sound on Keynote
I got Keynote on my Ipad, and when I import pps files, its music doesn't sound. It's very strange because the same file, I open it in powerpoint in my mac and it works fine, the musics perfect. So what's the problem? Can i do something on my mac to get this pps file to work with music on my iPad keynote?
thank youHow could I NOT import them? Appointments I do "by hand" show up immediately on the other devices. The imported appointments show up after modification.
-
[LR 3.5] An old bug is back : import dialog sometimes doesn't show up
Hi,
Sometimes, when I use the Synchronize Folder command or when I click on the Import... button, the Import dialog doesn't show up (sometimes meaning here "very often"). Obviously, the dialog has been loaded because at this time, LR is in a modal state (you can't use any user interface element - you just get a beep when clicking anywhere in the main window). The dialog is here but it is not visible. I'm using a dual monitor setup but the problem also occurs when I de-activate the secondary display.
I already encountered this bug in previous versions and I thought it had been fixed. Unfortunately, it is back. When this happens, I have to reboot the system to get the Import dialog working correctly again. A logoff / logon is not enough. Killing the LR process doesn't help either. I'm running XP Pro SP3, 3GB of memory, /3GB switch enabled (disabling it doesn't change anything).
Thanks in advance for any advice.
PatrickSamoreen wrote:
Sometimes, when I use the Synchronize Folder command or when I click on the Import... button, the Import dialog doesn't show up (sometimes meaning here "very often"). Obviously, the dialog has been loaded because at this time, LR is in a modal state (you can't use any user interface element - you just get a beep when clicking anywhere in the main window). The dialog is here but it is not visible.
Actually, it can happen that when the Import dialog is in this hidden state, trying to close Lightroom causes a message box to appear : "Do you want to close the Import dialog and quit?" (or something like that). Well, I don't want to close it, I want to see it ! -
Canon .mts import 24p footage doesn't work ~
I was excited to see Premier CS5 could import Canon's 24p footage and had project settings ready for it.
I was dissapointed to find out that this function doesn't work. Premier shows my .mts files being 29.97 fps so I'm assuming the camera must inclose the 24p footage inside 29.97 fps container?
Does anyone know a simpe way to open a .mts file in After Effects, interpret the footage to "Guess 2:3 pulldown" open, and save export the file back into Premier?
I can't seem to figure out how to export the interpretted footage from After Effects back into Premier.Why are you guys going through all of this trouble?
Premiere works fine with 24p footage if you shoot it that way. I use it all the time. XH-A1 has both 24p and 24pn.
One is 24p in a 29.97 wrapper and the other is 23.976 native with flags. Shoot with the one you want and just use the right preset.
Sorry...I didnt realize you left out the camera you were using. If it's ont that doesnt have both modes you will need another software to remove the pulldown. -
Importing print presets doesn't bring all settings
This isn't the first time. I saved my print presets to desktop out of CS4. I load into CS5. All that imports is the NAME. The tray is default, any other settings like duplex, make booklet, staple, etc. all default. OK. Maybe CS6 fixes this. I export my print presets to desktop, load them into CS6 and all that comes in is my menu of preset names. Is there anyway to import presets so they actually retain all the settings I spent a lot of time creating. A bit tedious to have to redo every one from scratch. I exported my entire library of exports. Should I be exporting/loading one at a time? That's as much a waste as creating them from scratch.
10.6
In ID when you click Printer... (not Page Setup...) you should get a printer specific dialog with a Presets popup. There isn't a way to save both the InDesign settings and your printer specific settings in one preset:
If you click on the Presets popup you should see a Save at the bottom of the popup list
This preset for printing to my GCC's manual feed is also available in Mail and other apps -
Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
Regards,
Lindseycynecasey wrote:
... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
You have written a very long story, and I admit I have skipped most of it. But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
The fact that you chose not to update your hardware does not mean you could not update your software!
OS X 10.5 is very old (about four years). iTunes 11.1.5 (current version) requires at least OS X 10.6.8 to run. Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
You would start here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2). -
IMPORT FROM DATABASE doesn't work in Web Dynpro
Hi all, I want to use the code at the bottom to get the last packages visited by a user I specify.
But I'm getting this error:
IMPORT var_1 ... var_N FROM DATABASE is not supported in the OO
context. Use IMPORT name_1 TO var_1 ... name_n TO var_n FROM DATABASE
... instead. var_n DATABSE ... insted var_n FROM DATABASE.
Could someone please show me how I can resolve this?
TYPES : BEGIN OF ty_key,
uname TYPE euf4values-uname,
object TYPE euf4values-object,
END OF ty_key.
TYPES : BEGIN OF ty_value_table, " Last F4 Values
obj_name TYPE tadir-obj_name,
encl_object TYPE tadir-obj_name,
position TYPE i,
END OF ty_value_table.
DATA : gs_key TYPE ty_key,
f4_last_values TYPE TABLE OF ty_value_table,
gs_value_table TYPE ty_value_table.
gs_key-uname = item_user.
gs_key-object = 'K'.
IMPORT f4_last_values FROM DATABASE euf4values(eu) ID gs_key.Did you check the online documentation ? [http://help.sap.com/abapdocu_70/en/ABAPIMPORT_MEDIUM.htm#&ABAP_ALTERNATIVE_4@4@]
I see your code has differences from the example provided in the standard documentation. -
Word Wrap -- Imported Excel File Doesn't
I have a number of Excel files that I'm trying to work with in Numbers.
In a number of cases the text I enter in a cell is longer than the width of the column. In Excel I indicated that this was text and that the program should wrap. The data transferred over showed the text as I need -- spilling to a second line when needed. But when I enter new text in the same sheet and same column the text is truncated to the width of the column. I have the "Wrap" button clicked.
Any ideas?
Thanks
In a previous post one of our Discussions colleagues was kind enough to suggest that I should read the User's Guide. Let me say that before I post here I do try the Help function and the User's Guide. Often it seems I lack the appropriate vocabulary / can't figure out how to ask / etc. I only post here when I can't figure it out.
Also I am new to Numbers and am making an effort to switch from Excel. I wonder / fear that the files imported from Excel are not as "clean" as we might expect and so add to my challenges.
Finally I have a few questions but for the sake of matching a specific solution to a specific issue I will post a number of questions rather than ask all my stuff in the same post.jayessemm wrote:
I have a number of Excel files that I'm trying to work with in Numbers.
In a number of cases the text I enter in a cell is longer than the width of the column. In Excel I indicated that this was text and that the program should wrap. The data transferred over showed the text as I need -- spilling to a second line when needed. But when I enter new text in the same sheet and same column the text is truncated to the width of the column. I have the "Wrap" button clicked.
Any ideas?
Sounds like Numbers (or the user) is setting only the individual cells to wrap. To apply that setting to a whole column, click on any cell in the table to make the row and column reference tabs appear, then click the reference tab for the desired column to select the whole column. Now click the Wrap checkbox to apply or remove the Wrap setting to/from all cells in the column.
In a previous post one of our Discussions colleagues was kind enough to suggest that I should read the User's Guide. Let me say that before I post here I do try the Help function and the User's Guide. Often it seems I lack the appropriate vocabulary / can't figure out how to ask / etc. I only post here when I can't figure it out.
Understood. The Preface and Chapter 1 of the Numbers '09 User Guide provide a lot of the vocabulary specific to Numbers. You'll also learn a lot of that vocabulary by scanning the menus.
Also I am new to Numbers and am making an effort to switch from Excel. I wonder / fear that the files imported from Excel are not as "clean" as we might expect and so add to my challenges.
That's always a possibility, of course. Also, you'll find that Numbers does not support all of the functions and features found in MS Excel (although for many unsupported features, there are other ways of accomplishing the same thing, or something similar, in Numbers).
Regards,
Barry
Maybe you are looking for
-
GF 3.1.1 Admin Console Freeze -- A long-running process has been detected
I installed Glassfish 3.1.1 on both sparc and intel servers for solaris 10 & 11 platform. All my servers have the same symptom when I access the admin console. The console freezed and pop-up a message "A long-running process has been detected". There
-
Hi All, We are working on attaching OWSM policies of SOA suite 11g to secure the composites. Attached 'oracle/wss10_saml_token_service_policy' to the composite keeping configurations as default in saml login module. When we are trying to test this co
-
This type error pops up constantly and when I either click on OK or the red cancel on the top right hand side, it does not make any difference and is constantly there giving me total frustration. How do I remove this application please? Kindest Regar
-
Why does Firefox keep crashing when I use it on my Dell Precision computer w/XP operating system?
Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. You can try: Removing one or more tabs that you think may be causing the problem Starting an entirely new br
-
How to cache a content item like a Static HTML Page from UCM to Coherence/C
Hi All, How to cache a content item like a Static HTML Page from UCM to Coherence/Coherence Web? Thanks