Import into iPhoto 9  originals and modified

Terrance,
When I manage to get my large library moved will the resulting library in iPhoto 9 have both originals and the ones that I have modified along with individually dated pictures. These are not the dates that I imported them but the dates I have given them to correspond to the approximate dates that they were taken?
I think I asked this before but have lost the thread.
Thanks again for your help.
Barbara Westmoreland

connect the two systems together (network, FireWire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system - launch iPhoto and it will convert the library as needed - be very careful not to accidentally open the old library open the old system with the new iPhoto - the conversion can not be undone
+_*Your moved and converted library will be identical in every respect to the original library*_+
LN

Similar Messages

  • Importing into iPhoto after CS and Bridge.

    I have moved from a PC using PS7 to edit and ACDSee to manage my photos.  I am now on the latest iMac using CS6 to edit and Bridge to manage my photos.  Many of my photos started out as scans by ScanCafe.
    I can successfully load into Bridge an old photo file that started as a scan then was renamed by ACDSee ( and possible editied by PS7).  i can also further edit the photo in CS6 and rename in Bridge.  However, when I try to import the result into iPhoto (I want to use Faces) the file name is not properly picked up by iPhoto and called a Title.  I can successfully import the original file (scan plus ACDSee rename) and iPhoto pickes up the Title from the file name.
    When this doesn't work properly, I can slect the photo in iPhoto and click on Info but the Title field is blank on the top RHS of the screen.  If I scroll over the blank title, a pop-up shows the correct Title.  So there appears to be a disconnect as the file is passed between these software packages.
    I could send some sample photos but can't attach them.
    I hope that this reaches someone with Adobe and iPhoto experience so I don't get into finger pointing between the two products.

    dmoffat323 wrote:
    Let me summarize more clearly… 
    Oh, I understand you, dmoffat323. 
    Let me try again:
    dmoffat323 wrote:
    …With Bridge I am able to go through my folders and files with no problems. File names are visible and correct, and renaming works fine…
    Bridge is only showing you the embedded low-res JPEG thumbnail/previews that iPhoto leaves exposed after swallowing your actual image files into the entrails of one of its libraries/packages.  Just like Curt Y says.
    If you still want to use iPhoto, Curt Y has the right advice for you, i.e. to check out the Apple discussion boards, specifically the iPhoto forum.
    https://discussions.apple.com/community/ilife/iphoto
    You are not addressing Adobe here.  We are all users just like you, and we are not here to defend Adobe or to apologize for them.
    What I am also telling you is that Curt Y is a Windows user and yours truly an avid Mac User of three decades' standing who nevertheless detests iPhoto.   Personally neither one of us gives a darn that iPhoto and Photoshop don't play nice with each other.  We're just trying to give you the best advice we can.
    Also remember that Apple banned the use of Adobe's Flash, and is actually a competitor to Photoshop with its Aperture application.  Not really a flawless relationship there.

  • IPhoto import brought originals and modified photos?

    I am trying to migrate from iPhoto to Aperture. When I imported my iPhoto library and then browsed the Aperture package I found that it had brought over both my original iPhoto pictures and the modified ones. This created an unessesary 6 gig of lost space. Is there a way I can force it to only bring over only the modified ones or somehow delete those out? Thanks

    Is there a solution to the problem?
    In a word, No.
    The problem goes back to here:
    I backed up my photos by saving the "Originals" and "Modified" folders to an external drive
    When you did this you missed the key file that tracks the relationship between these elements of the iPhoto Library - the main database file. Once that’s gone there is no way to recreate the relationship between the Originals and Modified versions. The correct way to back up iPhoto is to back up the Library in it’s entirety. Frankly, unless you’re recovering from disaster there is never a need to enter the Library or to deal with it as anything other than a single entity.
    When I manually copy the two folders into the iPhoto library directory it doesn't work either.
    That’s right. Again, it’s back to the missing DB file. Simply having pics in a folder is not enough, they need to be imported.
    Best bet? For me I would trash the modified and start over with the Originals.
    Regards
    TD

  • After import into iPhoto, originals disappear and only thumbnails remain

    After importing photos into iPhoto, working on them and then closing iPhoto, when reopening iPhoto only the thumbnails remain and can't find the originals anywhere on the computer via a Spotlight. Ran Disk Utility and no problems found on HD. Have rebuilt the iPhoto Library. This has happened on multiple occasions.

    Here's a little more background on this problem. JPGs originally were imported from a CD and had camera given filenames, like 20110428-DSC_0118.jpg. After the import into iPhoto the application was closed. The next day when iPhoto was opened and any of the just imported photos doubled click on, a dialog box similar to this appeared that changed with the different file names:
    I did a little research and discovered that the camera that had given filenames were identical to those by a different group of photos from a different camera that already resided in the iPhoto Library! So I imported them again from the CD except this time I used the utility, Better Finder Renamer 8, to batch change the names to something completely different, like Mary_Spring_2011_Visit_001.jpg, and so on. Those were imported into iPhoto. iPhoto was closed and opened and everything was OK. The next day iPhoto was opened and the newly imported photos when double clicked, the same exact dialog box as above opened and the only newly named photos that could be found were the thumbnails. None of the original full-res images can be found doing a Spotlight search of the entire computer. So to answer your second question the same dialog box shows up. I'm confounded as to where they are going. Plus, why would the original filename that was changed be showing up in the dialog box?? That is why Disk Utility was run to see if there was any directory damage. But no problems were found.

  • Iphoto data folder different than originals and modified

    Some of the thumbnails in my Iphoto library have no picture file linked to them.
    I played with some pictures which were brought onto my computer from a camera with the time poorly set up. In doing so, some of the pictures in the data folder cannot be found in Iphoto. They are all there when I search through the originals and modified folders. It seems I may be able to replace contents of the data folder with contents from the orig/mod folders, seeing as all of the data is on an external drive.
    I routed Iphoto to use the backed up library as its source. All seems well, except for the folder issue. Is there and easy solution?

    I moved a bunch of folders around to open up space on my meager 80g HD Macbook so I could up grade to SL and not risk loosing any data. I moved the iphoto library to the external HD. I may have updated a previous back up and not changed the Data folder in the process. I think I updated the original and modified folders only into the HD's previous iphoto backup. The only folders I moved out of the original Iphoto folder in "pictures" were the modified and original folders because they were the largest files. The data folder and all others remain unchanged.
    Once SL was up and running smoothly, I opened Iphoto with the option button pressed and chose the program to read the pics from the Iphoto library on the external drive.
    Interestinly, When I did the same thing with my Itunes library it took about 20 minutes to load the library, in contrast, Iphoto was instant. Like it was reading the data folder within the computers HD and searching for the picture in the external. Movie clips seem to not be working at all. They don't seem to open QT automatically, or even work when it's open.

  • I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.  Please help!

    I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.   I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto.  I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken.  I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported.  I greatly appreciate some assistance!

    All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
    The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
    Regards
    TD

  • I have a Nikon S6300 and when I import into iPhoto the photos don't show up in events or photos only in recent imports

    I just purchased a Nikon S6300 camera and when I import into iPhoto the photos don't show up in either photos or events only in recent imports. 
    I have Snow Leopard on my MacMini.

    Control-click one of the photos under the Recent import and select "Show Event" in the contextual menu. Or you can use the View ➙ Sort Events menu in the Events mode to reset the sort order so the new import will be either at the top or bottom of the list.
    OT

  • My video that was taken with a digital camera and imported into iPhoto plays back at a very fast speed. Any ideas why?

    My video that was taken with a digital camera and imported into iPhoto plays back at a very fast speed. Any ideas why?

    Is it a slow motion video? iPhoto does not understand the slow motion tags created by some cameras, eg.g. the iPhone back camera.

  • Moving originals and modified to another computer

    I'm having an issue copying photos over from one mac to another. I made the mistake this weekend of importing photos from my camera to my work computer, and now I want them on my home mac.
    I tried coping the folders in both the originals and modified and pasted to the home library, but they didn't show up when I launched iPhoto. Then I tried copying over the roll's data, and that didn't work.
    I also tried renaming the roll's folders as the numbers were not out of sync.
    Any thoughts? Isn't this all XML driven?

    Slapshot Scott
    It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
    Remember, iPhoto is a database, data has to be imported. Simply putting it into a folder is not enough. This is further complicated by the fact that iPhoto will not import from the iPhoto Library Folder.
    If you have edited and tagged etc, and don't want to lose this information, then use iPhoto Library Manager and merge the required elements of the two libraries. You can download iPLM from here:
    http://homepage.mac.com/bwebster/iphotolibrarymanager.html
    Otherwise, simply put the files on the desktop and go file -> Import.
    Regards
    TD

  • Importing into iPhoto 09

    My photo folders are organized alphabetically, I prefer to have folders where I store my image folders and to link that folder to iPhoto. Is there a way to import into iPhoto where I can keep this arrangement? I believe every time I import into iPhoto it imports directly into the iPhoto library file. I also store all of my folders & library file on a Network Attached Storage device.
    Thank you So much for any advice.

    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    However, you need to be aware of a number of potential pitfalls using this system.
    1. Import and deleting pics are more complex procedures
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
    If disk space is an issue, you can run an entire iPhoto Library from an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    If you're concerned about accessing the files, there are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    I also store all of my folders & library file on a Network Attached Storage device.
    iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
    Regards
    TD

  • IPhone sometimes won't delete all the photos after I import into iPhoto

    Every so often, my iPhone 3GS won't delete some photos after importing into iPhoto and choosing "delete originals." It deletes most of the originals but strangely keeps a certain number around. My basic routine is to "Import All" and then "Delete Originals." This works 98% of the time, but sometimes the iPhone just gets hung up and won't delete the originals until I manually do it from the iPhone itself.

    I was looking further into this and I found out that on my Macbook Pro's System Preferences. In the iCloud settings, the "Photos" setting was checked and in the Options next to that, the "My Photo Stream" and "Photo Sharing" was also checked.
    I think this was the main problem. After I used iTunes to sync with the photos maybe there was some cache settings or something residual left on the iPhone which let to it being continuously restoring.
    This is the fix which I used. It is fine now.
    Check in System Preferences for - iCloud >> Photos is unchecked.
    Check in System Preferences for - iCloud >> Photos >> Options >> "My Photo Stream" and "Photo Sharing" is unchecked.
    Temporarily delete account for iCloud settings on iOS device - Settings >> iCloud (This didn't affect my main iCloud account only deleted my information on the device)
    Re-sync iOS device with iTunes.
    Set up your iCloud account on iOS device again.
    Hope this helps for anyone having this problem.

  • Lion corrupting EXIF information when importing into iPhoto '09?

    Hello,
    I use DXO to process my RAW images and get them into iPhoto '09.
    Since the upgrade from Snow Leopard, my JPG pictures that had perfectly valid EXIF headers before import into iPhoto
    $ jhead <path_to_file_before_import>/IMG_0343_DxO.jpg
    File name    : <path_to_file_before_import>/IMG_0343_DxO.jpg
    File size    : 6900360 bytes
    File date    : 2011:08:27 12:32:27
    Camera make  : Canon
    Camera model : Canon EOS 600D
    Date/Time    : 2011:08:14 12:58:24
    Resolution   : 5184 x 3456
    Flash used   : Yes (manual)
    Focal length : 30.0mm  (35mm equivalent: 47mm)
    CCD width    : 22.99mm
    Exposure time: 0.0050 s  (1/200)
    Aperture     : f/14.0
    Focus dist.  : 2.79m
    ISO equiv.   : 400
    Whitebalance : Auto
    Metering Mode: matrix
    end up with empty EXIF after the import:
    $ jhead <path_to_file_after_import>/iPhoto\ Library/Originals/2011/100CANON/IMG_0343_DxO.jpg
    File name    : /Users/Shared/iPhoto/iPhoto Library/Originals/2011/100CANON/IMG_0343_DxO.jpg
    File size    : 6901712 bytes
    File date    : 2011:08:27 18:30:39
    Resolution   : 5184 x 3456
    This was definitely not a problem with Snow Leopard (same iPhoto '09, I have not changed my workflow for years).
    Looking at a picture I imported with Snow Leopard (different camera body, but I checked with both):
    $ jhead <path_to_file_after_import>/iPhoto\ Library/Originals/2010/Oslo\ 17\ Mai/_MG_7938_DxO.jpg
    File name    : /Users/Shared/iPhoto/iPhoto Library/Originals/2010/Oslo 17 Mai/_MG_7938_DxO.jpg
    File size    : 10757229 bytes
    File date    : 2010:05:24 15:59:41
    Camera make  : Canon
    Camera model : Canon EOS DIGITAL REBEL XT
    Date/Time    : 2010:05:17 09:47:17
    Resolution   : 3456 x 2304
    Flash used   : No
    Focal length : 300.0mm  (35mm equivalent: 486mm)
    CCD width    : 22.20mm
    Exposure time: 0.0031 s  (1/320)
    Aperture     : f/8.0
    ISO equiv.   : 200
    Whitebalance : Auto
    Metering Mode: matrix
    Exposure     : shutter priority (semi-auto)
    Anybody noticing the same issue?

    hi djiti,
    DXO up to date,
    Lion up to date,
    iPhoto up to date (? I want to hear you say yes),
    I am at a loss.
    Some apps do not read the same info in the same place in the exif: iPhoto reads the "Creation Date" from "modification date" created in another app, for example; I use "A Better Attributes" app, to change the Exif in that case. But I have never seen that the Exif is "corrupted" by a photo app.
    Lex (I use iPhoto, and Photoshop Lightroom, know about DxO and Aperture but only a little experience)

  • File names changed when imported into iphoto

    I scanned thousands of photos and slides. I named them numerically with year and order it was taken (example for 102nd photo taken in 1984 is 84.102.jpg) I used Photoshop's file info to add a description on maybe 20% of the photos. Unfortunately, when I imported into iphoto, iphoto uses this information for the photo's file name. Is there a way to import photos into iphoto where it uses only the original files name and not embedded file info?

    The ones that (on the originals) I entered descriptive things into Photoshop's XMP file info's document title line -- well that is what is shown as the name of the file rather than its real numerical name. Example: on a photo saved as 92
    iPhoto uses the Exif and IPTC metadata for the photo information. When you typed "Big Snowstorm" in there you put it in the Title field. iPhoto is showing you the Title of the photo. It only shows you the Filename if there is no entry in the Title field. Had you put it in the Caption field you would not have this problem.
    Try remove the title, see if that works.
    Another commend: This format of filename
    92.133.jpg
    Is potentially very dangerous. Computers use the period to distinguish the filename from the suffix that tells your machine what the type of file it is. Currently, you're telling your machine that this is file 92, of the type 133 and also the type jpeg. Characters such as periods, slashes, dashes should eb avoided in filenames. Sooner or later your file naming convention is going to cause you problems.
    Regards
    TD

  • I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to cr

    I have Iphoto '09, version 8.1.2 (424). I am having an identical problem.  All my pictures are imported into Iphoto when I downloaded them from my camera.  Until recently, I thought that the pictures were actually saved in the library.  Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that.  To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
    I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it.  I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
    When I am trying to upload a photo to the web, I get the Finder folder showing  with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth.  This is a folder name that I cannot find in my HD anywhere when I look for it.  If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly).  How do I get my folder of edited photos to show when I want to upload a picture to the web?
    Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

    See my response to your other post.

  • I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter.  If that is the case then something is wrong with iPhoto or your perhaps your library.
    How large a date change are you putting in?  iPhoto currently has an issue with date changes beyond about 60 years at a time.  If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
    If that is not the case:
    Remove the following to the trash and restart the computer and try again:
    Home > Library > Caches > com.apple.iphoto
    Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
    ---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
    Let me know the results.

Maybe you are looking for

  • Switching to Arch: Outstanding issue w/ printing

    I've spent the last six months or so switching to Arch and intel (from OS X/Debian and ppc). I did think I was getting there but I've got stuck on some issues which seem small in some ways but are really problematic given the kind of work I need to d

  • ITunes or iPhoto do not appear when I click the music or photo icons

    I wish to add music & photos to my production in iMovie. But when I click the music or photo icons, iTunes and iPhotoe do not appear in the boxes that open. I can have them open in another window and drag them in, but this is not what is supposed to

  • Getting the Error : SSLException :End user tried to act as a CA in WAS

    I have a web service application running in WAS 5.1 and client application running in WAS 6.1. We use server side authentication and we have configured the trust store keystore on the client side. But when we try to invoke the wenservice i get the er

  • Clientgen with JAXWS -- how to bind with JAXB?

    I'm using WLS 10.0 "clientgen" to generate Java classes from my WSDL files. All goes well for the simpler WSDL files. Since I'm new to JAXB, I don't quite understand now how to bind the output files using JAXB. It seems this would have been done in t

  • Cannot restore, possibly dead?

    I have a secondhand 3GS that was given to me with a broken screen about a year ago. I finally got and installed a new display. The phone doesn't power on when I hit the sleep/wake button and nothing happens when I attempt to reset it. When I plug it