Import is not accessible

I have a Sony Handycam DCR-PC109 connected to my PC with a USB cable. The PC is running Windows XP. The camcorder is set to Streaming and the video is playing on the camera's display screen. In Premiere Elements 3 I click on Capture and Import not accessible. What did I do wrong?

MLMH,
As Ozpeter says, if you have either a PICMCA or ExpressCard slot on your laptop, you can purchase a FireWire (IEEE-1394) card to fit that. Your local computer shop should have versions that will work. The only possible concern would be the BIOS of your computer - can it accommodate a FireWire connection? Most can, if the unit is no more than 5 years old. I would also be surprised if a newer unit did not have a FireWire connection. Note: this might be referred to as an "iLink," a "FireWire," or an "IEEE1394" conncetion. You might want to check the "manual," which is usually a PDF file on the restore disc, that should have come with your laptop, any printed manual or on the mfgr's Web site.
If you cannot find a card locally, I have had good service with www.firewiredirect.com. I've purchased a half-dozen different cards from them, and they are quick and have fair prices. Do a little homework, prior to ordering on-line, to make sure that you get the exact card you need, as there are a few different "form factors," with regards to these cards. Some will work in other connections, but many need exactly what they are designed for - check this out carefully and be sure to get the right one.
Also, if you do source locally, you might have the option for the tech folk in the store to set it up for you. Usually, it is just plug-it-in and go, but your BIOS might need to be updated, i.e. "flashed," or utilities might need to be installed. If you are not comfortable doing either, then it can be handy to have a "geek" do it for you.
One little warning: these card connections are not all that sturdy. When the card is installed, be careful when moving the laptop. I always remove the card, once the unit is shut down. Also, with ExpressCard slots, these are usually spring-loaded interconnects. Be carefuly, when plugging in the cable, that you do not push the card too far in, as it will then release and pop-out. You might not realize this, and wonder why your new card doesn't seem to work. Last, there are a couple of different FireWire connectors. Check out your camera, and your cable. You can either try to match up the connector to the FireWire card's connectors, or just buy a new cable with the appropriate connectors. Check your camera's manual for the connector needed for it, and then the FireWire card. In my cable box, I think I have at least a half-dozen of every possible combo of connectores, especially as most of my FW stuff now offers IEEE-1394b (FireWire 800). Heck, you can never have too many cables, right?
Good luck,
Hunt

Similar Messages

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

My iPad is logged into my iCloud account, but my wife's iTunes. I have uploaded video footage from my iPhone to my iCloud. It appears on the iPad but is not accessible in iMovie? What's the fix?

My iPad is logged into my iCloud account, but my wife's iTunes. I have uploaded video footage from my iPhone to my iCloud. It appears on the iPad but is not accessible in iMovie? What's the fix?

You shouldn't have to change your iTunes account to not have to purchase it twice. If your devices are using different iTunes IDs, just purchase it on one device, then import it to your iTunes library by connecting the device to your computer, opening iTunes and going to File>Devices>Transfer Purchases. Once in iTunes, you should be able to sync it to your other device (assuming both devices are syncing with the same iTunes library). (And even if they were syncing with separate libraries, you could use Home Sharing to copy the app from one library to the other.)
Or, am I missunderstanding something?

When downloading the latest version of Itunes, the software is not accessible anymore and needs re-installing. How do I prevent that when re-installing I will not loose the numbers stored on my harddisk?

When downloading the latest version of Itunes, the software is not accessible anymore and Itunes seems to need to be reinstalled. How do I ensure the Itunes music is not lost and my pc is still recognized by Itunes store?

Crikey. Okay, that's part of the Gracenote SDK (that iTunes uses to go online to get album and track information for imports).
Let's take the message at it's word. If the file is damaged, we may be able to get past this by removing it from the iTunes program files and then doing a repair install of iTunes.
In Computer, open Local Disk C:\ (or whichever drive you've got your program files installed on).
If you've got a 32-bit version of Vista, open the "Program Files" folder.
If you've got a 64-bit version of Vista, open the "Program files (x86)" folder.
Open the "iTunes" folder.
Drag the gnsdk_sdkmanager.dll file out of the folder and onto your Desktop.
Restart the PC. Head into your Uninstall a Program control panel, select "iTunes" and then click "Repair".
Does the repair install go through properly? If so, can you launch iTunes now?

Shared Variable Deployment not accessible in Build Specification

Hi everyone,
I have a large project developed in LV 8.6.1 from which I executed numerous applications. I converted the project in LV 11 sp1f1, everything works well in code, everything is saved.
I wanted to build executable without cod change for LV 11 here is what I found:
Build the executable with Build Specifications inherited from LV 8.6 for which I checked on Use Labview 8.x file layout in Advanced. My application programmatically deploys all internal shared variables and when I wanted to access the Shared Variable Deployment in project in Build Specification then labview locked and I have to kill LV. Other time I did not access the Shared Variable Deployment and I start building executable when it looks the build progressing similar as in LV8.6 and last step before popping the attached error all the saved files in the build location were deleted.
I set up a build specification just for this LV 11. Again I wanted to access the Shared Variable Deployment and again labview is looping something from which I had to kill labview. I opened it again, I skipped the shared variable deployment line and I build the application. Because my application programmatically deploys shared variables I included in builder the lvlib where shared variables belong. The build files does not includes this time as output the file *.lvlib for which my inherited LV8.6 code programmatic deploys shared variables.
My question is should I change the code (very large code) taking out the programmatic variables deployment and to relay on the build executable to do deploy them then what should I do with Shared Variable Deployment line in Build Specification which for my large application is not accessible or is any way to still use the shared variable as in LV8.6 but for which I need *.lvlib in build location.
Another important issue: when I launched my application built as I showed in previous second case, first thing that I see is that my application is not able to save errors (I have a log file where I save different drivers or communication errors). Any idea why application even without shared variable deployed is not able to write a text file? I am administrator of my computer with all rights.
Thank you,
Virginia

No, I am not able to close Labview because of the windows error with only one button to close application. The application is correct executed. Next time when I start this project it is asking me if I want o recover even if I accept to recover it looks what I had last time it does not save.
For my application also I am building a VI without diagram built as source distribution for which I set in my builder this top vi and I excluded everything from the project because my application copies instances at the run time of this vi as many times as hardware modules I have in the system and also I have this vi included in my application (for the content of this vi). My vi contains interfaces for hardware configuration as well as drivers functions call for each hardware module I have to control in my application. Everything is good building this vi, but in less then one minute after the build is executed and build interface closes again I have the windows error which force me to close project. Next time when I open project I did not see the option to recover the project.
In the mean time I received second message and I wonder if you refer to files names or to folder names or all together. I checked and the maximum size is 122 characters in the vi paths.
Thank you,
Virginia

Statement not accessible error

Hi, we have upgraded the project from 46c to ecc version.
In one standard include MV45AFZZ , one statement is added IMPORT itab1chk FROM MEMORY.
In MV45AFZB , the value for itab1chk is getting exported.
In 46c , we r not getting any error when we run the VA01 transaction.
But in ECC, this transaction going for Dump giving error 'The statement is not accessible ' referring to the statement IMPORT itab1chk FROM MEMORY which is in MV45AFZZ include.
I tried by adding ID <KEY> to the IMPORT AND EXPORT statement. But still getting same error.
Can any one please suggest the solution.
Thanks,
laks.

Hi,
You get this Error normally when you are doing a syntax check on the Includes in which the code lines are not between FORM and ENDFORM.
I dont think this is a serious error atleast till 4.7 as the system will allow you to activate the Include. May be the ECC is a bit more stringent on this issue.
I think your problem will be solved if you try to include all the code lines only in the FORM and ENDFORM.
regards,
Mahesh

Statement Not Accessible for a FM

Hi i am getting Statement not accessible syntax error at the Call Function Statement,(bold line) for the following code. Can somebody clarify me why this is happening. Thanks in advance.
PROGRAM ZHR_FEATURE_RLPGR .
TABLES : PERNR.
TABLES : T74HG, PSKEY, T5UB3, T5UB9, T5UBT, T5UBA .
infotypes:0001,0021.
CALL FUNCTION 'EXIT_SAPLHRBEN00FEATURE_029'
EXPORTING
    _PERNR                 = PSKEY-PERNR
    _BEGDA                 = PSKEY-BEGDA
    _ENDDA                 = PSKEY-ENDDA
    _BAREA                 = T5UB3-BAREA
    _BENGR                 = T5UBT-BENGR
    _BSTAT                 = T5UB9-BSTAT
    _BPLAN                 = T5UBA-BPLAN
    _SUBTY                 = PSKEY-SUBTY
    _OBJPS                 = PSKEY-OBJPS
IMPORTING
   _RLPGR                  = T74HG-RLPGR
   EXCEPTIONS
   EVALUATE_FEATURE       = 1
   CUSTOMER_ERROR         = 2
   OTHERS                 = 3

Hi,
Try with as below.
CALL FUNCTION 'EXIT_SAPLHRBEN00FEATURE_029'
EXPORTING
    _pernr                 =
    _begda                 =
    _endda                 =
    _barea                 =
    _bengr                 =
    _bstat                 =
    _bplan                 =
    _subty                 =
    _objps                 =
    iscobra              =
    _nontx                 =
IMPORTING
_RLPGR                 =
EXCEPTIONS
EVALUATE_FEATURE       = 1
CUSTOMER_ERROR         = 2
OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Ram.

Statement is not accessible

Hi Anybody ,
i am getting an error 'Statement is not accessible'
REPORT ZZDEMO_EXPORT.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name            TYPE rs38l_fnam.
DATA: lf_formname           TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE   LIKE SY-SUBRC.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
                     CHANGING lf_retcode.
IF lf_retcode NE 0.
    return_code = 1.
ELSE.
    return_code = 0.
ENDIF.
ENDFORM.                    "ENTRY
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
    ID                            = 'ZPRI'(002)
    LANGUAGE                      = 'B'
    NAME                          = '123456'
    OBJECT                        = 'VBBK'
TABLES
    LINES                         = GT_LINES
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM processing USING proc_screen
                CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
   EXPORTING
          FORMNAME           = lf_formname
   IMPORTING
          FM_NAME            = LF_FM_NAME
   EXCEPTIONS NO_FORM        = 1
          NO_FUNCTION_MODULE = 2
          OTHERS             = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
    i_vbeln                   = i_vbeln.
ENDFORM.                    "PROCESSING
How can I solve that problem ?
Thanks & Regards
Ambrish Dwivedi

Hi,
I have changed the source code , please check it.It is working fine.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = 'ZPRI'(002)
LANGUAGE = 'B'
NAME = '123456'
OBJECT = 'VBBK'
TABLES
LINES = GT_LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
CHANGING lf_retcode.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM processing USING proc_screen
CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = lf_formname
IMPORTING
FM_NAME = LF_FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
Regrads,
Suvajit

"Create Object " statement gives error: statement is not accessible

Hi All
U must b doing good.
I am new in ABAP Objects.
I have writeen a simple Class definition n Implimentasion code.
but whenever i write statement "Create object", it gives error.
'm working on SAP Dev 4.7.
the code was like this:-
class counter definition.
public section.
    METHODS: set IMPORTING VALUE(set_value) TYPE i,
             increment,
             get EXPORTING VALUE(get_value) TYPE i.
   private section.
   DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
    count = set_value.
ENDMETHOD.
METHOD increment.
    count = count + 1.
ENDMETHOD.
METHOD get.
    get_value = count.
ENDMETHOD.
ENDCLASS.
DATA: cnt_1 TYPE REF TO counter.
DATA number TYPE I VALUE 5.
CREATE OBJECT cnt_1 .
CALL METHOD cnt_1->set
EXPORTING set_value = number.
DO 3 TIMES.
   CALL METHOD cnt_1->increment.
ENDDO.
CALL METHOD cnt_1->get
IMPORTING get_value = number.
write: number.
its giving error like:-"Statement is not accessible."
plz tell me the way to resolve this error.
thanx n regards
Prashant tiwari

hi prashant....
this is the link to post your therads for abap objects:
[ABAP Objects;.
if you want to reward, on the left of every reply ther would be some radio buttons like answere, helpful answer,... so on. click the radio button which suits you. answered closes the thread and other points are displayed there itself.
---regards,
   alex b justin

My old backups on the Time Machine disk are not accessible.

Hi everyone,
I installed a fresh OS X Mountain Lion yesterday. I tried to use Migration Assistant (in the Utilities folder) for the first time, to migrate my old data from the Time Machine back-up disk.
After almost 6 hours, my data was completely in place from the backup disk. In fact, the data was gotten from the latest version of backups as I expected. But now, when I go to Time Machine to browse my old backups, it seems that all backups are still there, detected by the Time Machine itself, but it is not possible to access any of them.
In fact, selecting one of the past backups from the Time-Line on the right edge of the screen, has no effect. All the windows behind the current finder window in the Time Machine are also dimmed, seems that no backups are there. But the Time-Line on the right edge of the screen displays several items from the first backup on my disk to the latest which was for the day before yesterday.
This is not what I expected from the Time Machine. I was so glad when the Migration Assistant read all my data from the backup disk and put them in place. But I did not expect to lose my old backups which are still there on the disk, but Time Machine behaviour is like the times where there are no backups.
It is important to note that before migrating data using Migration Assistant, I was able to browse all my backups in the Time Machine. This was also one the great features of Time Machine, since I had a fresh OS installation, and all my data from the past were accessible in the Time Machine.
I could also get my data one by one and restore them in-place using Time Machine but it was some how cumbersome.
Now is there any one to let me know why this has happened? I Appreciate your time to write.
Mani Hamedani

Troubleshooting information:
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

SQL Always On: not accessible for queries

Hi forum!
I'm monitoring SQL 2012 Always On Groups with the latest SQL MP. A couple of the database replicas are configured to not allow access. This is to avoid additional license costs for those minor important databases.
However, I get the following events in the SQL log:
Error 976, Severity 14
The target database, '%.*ls', is participating in an availability group and is currently not accessible for queries. Either data movement is suspended
or the availability replica is not enabled for read access. To allow read-only access to this and other ...
Of course, as soon as I configure read-only for those databases the events disappear.
Is there any other solution?
Has anyone identified already (all) the accessing workflows?
Thanks in advance,
Patrick
http://www.syliance.com | http://www.systemcenterrocks.com

Hi All, I am also experiencing this issue. Having a look at the statements SCOM is issuing, it's actually checking whether the AG secondary allows connections but it ignores the value and tries to connect anyway. I believe this is a minor bug.
See below for these queries.
You can vote to correct it through Microsoft Connect on: https://connect.microsoft.com/WindowsServer/feedback/details/1121330
--SCOM/MP: is this database a replica and does it allow connections?
SELECT d.name, d.database_id, CASE WHEN d.replica_id IS NULL THEN 0 ELSE 1 END AS is_replica, ar.secondary_role_allow_connections
FROM sys.databases d JOIN sys.availability_replicas ar on d.replica_id = ar.replica_id JOIN sys.servers s ON s.name = ar.replica_server_name AND s.server_id = 0 /*local server*/
WHERE d.database_id = x --current db id in sys.databases loop
--SCOM/MP: let's look into that db (regardless of whether it allows connections)
--EXCEPTION: The target database, 'x', is participating in an availability group and is currently not accessible for queries. Either data movement is suspended or the availability replica is not enabled for read access. To allow read-only access to this and other databases in the availability group, enable read access to one or more secondary availability replicas in the group. For more information, see the ALTER AVAILABILITY GROUP statement in SQL Server Books Online.

Why are protected fields not-accessible from sub-classed inner class?

I ran across a situation at work where we have to sub-class an inner class from a third-party package. So, it looks something like this...
package SomePackage;
public class Outer {
   protected int x;
   public class Inner {
package OtherPackage;
public class NewOuter extends Outer {
   public class NewInner extends Outer.Inner {
}Now the NewInner class needs to access protected variables in the Outer class, just like the Inner class does. But because NewOut/NewInner are in a different package I get the following error message.
Variable x in class SomePackage.Outer not accessible from inner class NewOuter. NewInner.You can still access those protected variables from the NewOuter class though. So, I can write accessor methods in NewOuter for NewInner to use, but I am wondering why this is. I know that if NewOuter/NewInner are in the same package as Outer/Inner then everything works fine, but does not when they are in different packages.
I have to use JDK1.1.8 for the project so I don't know if there would be a difference in JDK1.2+, but I would think that nothing has changed. Anyway, if you know why Java disallows access as I have detailed please let me know.

Although I don't have the 1.1.8 JDK installed on my system, I was able to compile the following code with the 1.3.1_01 JDK and run it within a Java 1.1.4 environment (the JVM in the MSIE 5.5 browser). As long as you don't access any of the APIs that were introduced with 1.2+ or later, the classes generated by the JDK 1.2+ javac are compatible with the 1.1.4+ JVM.
//// D:\testing\SomePackage\Outer.java ////package SomePackage ;
public class Outer {
    protected int x ;
    public Outer(int xx) {
        x = xx ;
    public class Inner {
}//// D:\testing\OtherPackage\NewOuter.java ////package OtherPackage;
import SomePackage.* ;
public class NewOuter extends Outer {
    public NewOuter(int xx) {
        super(xx) ;
    public class NewInner extends Outer.Inner {
        public int getIt() {
            return x ;
}//// D:\testings\Test.java ////import OtherPackage.* ;
import java.awt.* ;
import java.applet.* ;
public class Test extends Applet {
    public void init () {
        initComponents ();
    private void initComponents() {
        add(new Label("x = ")) ;
        int myx = new NewOuter(3288).new NewInner().getIt() ;
        TextField xfld = new TextField() ;
        xfld.setEditable(false) ;
        xfld.setText(Integer.toString(myx)) ;
        add(xfld) ;
}//// d:\testing\build.cmd ////set classpath=.;D:\testing
cd \testing\SomePackage
javac Outer.java
cd ..\OtherPackage
javac NewOuter.java
cd ..
javac Test.java//// d:\testing\Test.html ////<HTML><HEAD></HEAD><BODY>
<APPLET CODE="Test.class" CODEBASE="." WIDTH=200 HEIGHT=100></APPLET>
</BODY></HTML>

PS1 fonts not accessible in CS4 & MS Office 2008 - but FontBook shows them

Desperate:
I just installed Snow Leopard and found that in all of Creative Suite 4 and Office 2008 my Postscript Type 1 fonts are not available or accessible. The font Book lists them (I removed duplicates and indicated problem fonts, which actually never were problems in OS 10.5). I tried all kinds of install, delete, re-install etc. to no avail. Everything worked great under OS 10.5. (Same results on my wife's computer; both newest iMacs).
I spent hours reading blogs, comments etc. on the internet, but found no answers — even have the feeling the problem is completely ignored by Apple, Adobe and Microsoft. Yet the livelihood of a graphic designer depends on it.
I have hundreds of carefully designed documents, important design jobs that I constantly have to use again, and I spent a fortune on type libraries with over ten thousand quality fonts by different foundries — a treasure I don't want to lose.
Is there any answer to it? Otherwise I have to go back to 10.5

First, I am not speaking of the pre-installed fonts or those that come automatically with programs.
Yes, I realize that as you clearly stated you are unable to use Type 1 PostScript fonts. My response of "any" included Type 1 fonts. I can pull Type 1 PS fonts from an Illustrator 8 disk and use them with no issue, nor any other Type 1 fonts I have (thousands). Same goes for all other types of Fonts OS X supports.
After upgrading to 10.6 (no fool around or extras, just plain upgrade) all these fonts are not accessible anymore out of the CS4 Suite or Office Suite, which is basically all I need and use (well, also Filemaker).
This is partly why I asked you to create a new test account. I'm trying to see if it's just your existing account that's not working (which would mean the problem is only in your account), or if the fonts don't work with any account, even a new one (which would mean a system wide problem).
FontBook should be mature and good enough to handle the fonts,
Font Book has been around for four versions of OS X now, but it's still a light use font manager. Anyone in prepress, design or whatever a person does who handles a lot of fonts regularly should be using a more heavy duty font manager.
and I also tried Font Explorer X, which didn't help either.
So it's either a problem with your system overall, or your account. Please try a new account to rule out one or the other.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Import is not accessible

Similar Messages

Maybe you are looking for