Import issue FCPX 10.0.6

I have seen a number issues with importing after upgrading to 10.0.6, but don't know of anyone having this issue.
I am trying to import media, mostly 5DMII footage, but am unable to navigate through my own folder structure. I have a "Projects" folder, inside that folder, is a folder for each project I'm working on, and within those folders are more folders for audio, video, photos, graphics, etc. The issue now, is that when I tab down the Projects folder, FCPX just lists all individual files, it does not give me folders to continue tabbing down into to find specific project media. In fact, there are only more folders, there are no loose files within the projects folder.
When I look at the same Projects folder in Finder, this is what I should actually see:
I am working off an XSAN server, which has been totally fine and I'm not convinced that's causing this issue.
Where this issue gets funky, is that it only arise when I look in the "zProjects" folder. At the same level as that folder, I have other folders that are unrelated to media work, however, when I tab those down, I can see the folders within them, and can tab down to any level I want. It's only in the "zProjects" folder that I can't see folders within folders, only a giant list of all individual files.
Is anyone having this same issue? Any suggestions?

Yes, I am totally onboard with this update in 10.0.6. My issue is that FCPX is looking a normal folder (in this case, called zPROJECTS) and instead of showing me the folders within zPROJECTS, it is throwing the folders to the side and just showing me individual files (as can be seen in the screenshots above).
So, to elucidate, I work at a university and we recently shot some video of Family Weekend. I created a family weekend folder, inside that is a video folder and inside that are the video files:
XSANvolume/DIGITAL_MEDIA/zPROJECTS/2012_FAMILY_WEEKEND/VIDEO/Video File 1 of 100
Note, that inside zPROJECTS are another 40 or so folders from past and current projects we are working on. The family weekend folder is not the only one inside zPROJECTS.
All of the footage is shot on a 5dmii, so it's all h264 .mov files, not an AVCHD folder structure (or similar format) from a memory card. In the previous versions of FCPX, I would have said "Import Files" not "Import from camera."
However, what FCPX shows me is not the file directory above, instead it gives me the following:
XSANvolume/DIGITAL_MEDIA/zPROJECTS/Files 1 through more than 3000
So, I can't navigate through the folder structure I created for each project we work on, I would have to sort through thousands of individual files to find what I need to import.

Similar Messages

Odd frames added to start of audio export from LPX when imported into FCPX

Running into a weird issue exporting audio out of Logic Pro (10.0.6) for import into FCPX (10.1.1) - Logic is introducing extra frames (varies between 2 to 4 frames) at the front of exported audio, becomes detectable when imported back into FCPX.
I do a lot of work where I sync music performances on camera that are recorded in audio and MIDI, and have to deliver remixed audio with picture AND a .MID file that all sync. Workflow used to be shoot video on a C100 and another DSLR with either an audio feed or live mic patched to the camera, while Logic recorded the MIDI performance and any ambient audio via separate mics and pres. Shoot always had some kind of "slated" start marker on camera, in camera audio, and in Logic. Camera edits were edited in FCPX, exported as a Quicktime with the "slate" for a start marker, then audio and MIDI handled in Logic.
This always used to work thru to last fall, when we took a hiatus.
Upon resuming some final shooting in the last two weeks, our audio edits are always running 2-4 frames behind FCPX. It's a consistent offset for an entire export (so there's no drift, no jitter within the files - but the slate tones might be 2 frames and 17 subframes behind and the whole audio file runs behind.) Another export might be 3 frames 2 subframes behind. Always kind of random in the amount of drift - but never more than 4 frames.
Tried a test where I imported just the camera audio in Logic as an extracted audio track, then exported same audio file back to the Quicktime but left the original audio in the video - Logic's exported audio ran behind sync from the original.
Obviously, I'm paying attention to frame rates, sample rates, etc.
As a test, I exported an XML out of FCPX, imported it into Logic, performed some edits, and used the File>Export>Project to FinalCut Pro XML - so everything matched across the board. Opened the export in FCPX - audio ran behind sync again.
If it was just audio I was concerned about, I'd just line it up in FCPX and call it done - but my exported MIDI file NEEDS to be in sync with the picture AND the audio... and wasting time calculating the Logic offset error is a huge detour from getting this work done quickly.
I thought maybe there could be a plug-in issue, but it happened even in the extracted audio from the Quicktime with no plug-ins in any of the signal chains.
Any ideas?

Well… here's a clunky workaround.
It's either a problem with the exported FCPX-XML or the way Logic Pro X interprets the XML.
The simple test here was to put a clip in the FCPX timeline and export it as an AIFF and then export an XML too.
Import the XML into Logic, then import the AIFF as a new track. By default the Logic project is 120BPM. By analyzing the xml-based track and the aiff track, the xml track has an added 164 ticks to the beginning of the referenced video-audio.
Move the playhead to zero, zoom in to the timeline and drag the tick field to 164 then blade all your tracks, then click/drag the bladed tracks to zero. Voila!
It seems to only affect the first audio file. So for example, when I have 10 video clips in my FCPX timeline, only the first audio clip has the added 164 ticks.
Now on to the next challenge…
It's not enough to just de-compound your clips because L and J cuts get referenced to the VIDEO, not the audio underneath.
So… In FCPX you MUST select each clip and choose Break Apart Clip Items from the Clip Menu. Perhaps this is old news but thought I'd mention it here in case others were having problems.
Let's hope Apple steps up their xml game and realizes that when I choose export XML-Audio from the xml popup menu… I want it to send the duration of the audio, not the duration of the attached video.
Ergh! Well… as my friends say… "We're still in the stone age with all this technology."
Happy editing all!

Strange import issue .. no longer works in 2.6 or Beta 3

Strange import issue.
I use LR-2.6 everyday but have only played around with the LR-3 for a limited amount of time so the other day I decided check it out and tried to import a handful of RAW(canon) files on a SDxc-8g card via a USB card reader. I set it up to copy and convert to DNG, apply a few keywords and Metadata but when I tried it acted like it imported the first image and then froze. Card reader lights stopped blinking and just stayed on, program task bar doesn’t show any progress, not even for the first image. I then went to the folder that I was going to have the images copies to and it contained a file of the first image, but there is no indication that LR-3 even created it and it doesn’t show up in the catalog. When I tried to close out LR-3 is popped up the “in the middle of a task warning” so I just closed the program and tried it a couple more times to no avail.
So I though o well I will just open up LR-2.6 and import them from there, guess what now LR-2.6 does the exact same thing!!
I thought maybe my card reader was a POS but I was able to drag all the files to a new folder on my desktop and import them from there, nope. Tried rebooting a couple times, even opened a new catalog to test with, in both LR-2.6 and LR-3 and neither will work..
I am stumped any ideas?

Thank you for everyone's assistance
I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

Okay, still trying to get my import issue resolved.
I have a SONY HDR-HC3 DVmini.
No problems with iMovie 3 on my Powerbook.
iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
My buddy thinks it might be a Quicktime issue.
He said to download Quicktime Pro, that might resolve this issue.
I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
THANX

Hi
Can be so much.
Often Camera has to be connected to Charger/mains during Capture.
An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
My list on this
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

I NEED HELP...I am new to FCPX and I can NOT get my AVCHD files on HD to import to FCPX

I know this has prob been covered a million times BUT I cant find the answer or solution. I am new to FCPX and I shoot video on canon xa10 using internal HD...When I go to import into FCPX the files are empty?? Why?? I can see the files on my HD but the import window only shows the name of the file and no footage to import..WHAT AM I DOING WRONG?? Tell me I did not pay $300.00 for an editing prog that I cant use..And please be gental, like I said im new to editing side.

Bowjunky9 wrote:
… I added this footage to my HD weeks ago to make room the the camera HD for more footage. What do you mean it needs wrap?
AVCHD is no 'format' but a specific folder-structure.
to allow FCPX to import from there, this COMPLETE files&folders structure has to be intact.
'cause people ignored that, since MacOS 10.8. this folder strucuture is hidden in a pkg-file, which looks like that:
this 'Private' thing is actually a folder, containing folders, containing ....
my screenshot shows a backup or 'archive' of one of my recordings, on an extHDD, inside a folder.
to import such a camera-backup, I choose Import File in FCPX and click down to my backup, 'til this structure gets visible.
in case for whatever reason you have NOT copied the whole SDcards content, it looks like this:
these are the actual 'videos' inside the AVCHD structure (notice the loooong way to it in the breadcrumb down below)
mts is no video-codec, but a 'wrapper' or media-container - inside are the h264 encoded videos. to allow FCPX to import such files, they needed to be re-wrapped from mts>>mov (NOT converted!)
there are commercial solutions such as ClipWrap, or the free reMux tool
http://www.nef.wh.uni-dortmund.de/~mt/remux/

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Import issue with Lightroom

I upgraded to LR5.2 2 weeks ago from 4.3. Install went fine, but I'm now having issues when importing my photos, Lightroom hangs partially through the import. The only choice I have then is to force quit the program, which then freezes my computer. Getting to be an invredibly frustrating exercise.
I have an iMac with OSX10.8.5 (Mountain Lion)
Lightroom 5.2
Importing & converting CR2 files (5DMkIII) to DNG.
Images being imported to an external hard drive.
Nothing has changed in my workflow or software except for the installation of LR5. I did read in some of the forums that there was import issues that appear to have been fixed with the latest release, however, whilst I DEFINTIELY have the latest release of LR5, this is still occurring. Any ideas? Another bug?
Cheers
Sarah

sure did. All permissions are admin & I'm it. I haven't tried DL via image capture - LR4 gets me to the same end goal, tis just rather onerous to have to muck around with this twice. Appreciate your taking the time on this

Duplicate Video Import Issue

Hello,
I am running PPRO CS6 (6.0.3) on Windows Vista
I am having a duplicate asset import issue. Let me explain...
I have a couple of Premiere Pro project files with multiple sequences in each. In each of the project files I have the same source video files imported as the some of the sequences in each of the project files reference the same source video file.
So here it was is happening...I have a project file with sequences 001-025 in them and I have have another project file with sequences 026-050. I have 25 sequences per project to keep the project sizes smaller and more manageable so my system doesn't choke.
Sequences 014 and 015 in the first project file both reference "Video01.avi" which is located on my external F: drive. I want to import sequences 027-030 from the second project file which both reference the same "Video01.avi" file on the same drive.
I know PPro is intelligent enough to know when importing assets from another project file that shares the same assets as the project you are importing into, it knows to only import the dependent assets which are not in the project file you are importing into. I have done this countless times and PPro has correctly only imported the assets it needed.
However for some reason when I am trying to import the above mentioned sequences from one project into another it is bringing in a duplicate copy of the source footage necessarily. I can't figure out why it is doing this. The sequences it is importing both reference the identical file on the same drive, etc. And I am using the "Import Selected Sequences" option.
Thank you,
Shane

I think I have solved my own issue. As stated above when I was trying to import sequences from another sequence it was brining in a dup copy of the same clip in the sequence. I was able to successfully have it not do that.
What I realized was happening is that even though the source footage video file is identical in each project file, when I opened it up the clip in the source monitor I had different IO points set for each version of the clip in each project. PPro I am assuming imported the second copy to preserve the IO points on the second version of the clip that was being imported.
I simply cleared each set of IO points on each reference of the clip in the project file and I was able to import the sequences I wanted without bringing in an additional copy of the source clip. So now I just have one copy of "Video1.avi" in my project file instead of multiple.
Hope this helps someone in the future who may be experiencing a similar issue.
Shane

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.

Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that.

Can video files made with a Canon XA-10 be imported into FCPX?

Files made with a Canon XA-10 do not seem to be recognized by FCPX.
Recording system of camcorder is MPEG-4 AVC/H.264.
Is there a format problem or a media conversion that needs to be made?
Thank you.
John

Tom is exactly right. Connect the XA10 to the computer using the USB cable that came with it. Then go File > Import from Camera.
Up will pop the import from camera window, which should show two cameras -- your Mac's built-in iSight camera, as well as your XA-10. And you should see the thumbnails from all the various videos you've shot with the camera. Just select the ones you want to import and click Import.
FCPX will begin importing (and transcoding) the videos. Do not disconnect the camera while this process is unfolding (it may take a while depending on how many videos and how long the videos are).

How much larger is an imovie file imported in FCPX

just planing to upgrade to FCPX . Would like to know how much larger wil be an imovie event file when imported into FCPX ?
and for also, for instance, if a camera .mts file is 10GB .. how big when imported into FCPX ?

None of you using FCPX ???

Import issues, Audio/video Unsynced

Having major import issues, audio and video won't play in sync. Working with MP4 and MXF on most recent version of Premiere CC. Everything plays fine in quicktime/vlc but goest haywire in premiere. Have been through tech support twice, updated drivers, cleared cache and Premiere still has trouble playing back video/audio in sync. Any idea what's going one? Our company recently switched to adobe for the supposed "ease" it handles different codecs and so far have had nothing but issues? Sorry if this is already addressed in one of the forms, am at my witts end now having lost multiple days trying to troubleshoot premiere.

Hi Adobe4,
Having major import issues, audio and video won't play in sync. Working with MP4 and MXF on most recent version of Premiere CC.
Sorry for this issue. Tell me, where did these files originate? From a video camera? Do they have a constant frame rate or a variable frame rate?
Thanks,
Kevin

DTW-- How to Import Issue for Production

Hi ,
How do i import Issue for Production Through DTW.
Thanks & Regards
somi mishra

hello,
why do you want to use DTW to issue for production ? You could use backflush as issue method so that you can skip issue for production job. If you have issue for production batch job which it means you want to add all the qty of RM issued to production one times and all at onces for more than 10 PO, I think it is better to use addon. You create an excel template and export the data to be txt file, the txt file imported to the issue for production form using the addon. I just compare this situation with the client request in long time ago. they request fast and not manual sales order creation from quotation. just to compare it to your situation but need your detail explanation.
Rgds,

Help me, oh great Toonz! (Slow import issue - # bazillion!)

Toonz you seem to be the most knowledgeable about this slow import issue.
I am trying to import from music CDs to a brand new, out-of-the-box, Maxtor External Hard Drive (usb 2.0). Currently I have a Dell Dimension XPS T500 Pentium3 w 512MB Ram and also a newly installed Sony 52x optical drive. Yet I still suffer from import rates of 3.0 or less.
Here is my CD Diagnostic from iTunes (which is hogging my CPU, btw).
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation XPST500
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9200 PRO Family (Microsoft Corporation)\RADEON 9200 PRO Family (Microsoft Corporation
IDE\DiskWDCAC29100D___________________________J74OA30K, Bus Type ATA, Bus Address [1,0]
IDE\DiskWDCWD200BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskMaxtor6L200R0_________BAH4, Bus Type USB
IDE\CdRomSONYCD-RW__CRX320EE____________________RYK3___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: SONY CD-RW CRX320EE, Rev RYK3
Audio CD in drive.
Found 6 songs on CD, playing time 66:34 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 19:49:35
Track 3, start time 26:25:28
Track 4, start time 37:23:48
Track 5, start time 48:29:23
Track 6, start time 57:47:15
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 52.
The drive CDRW speeds are: 52.
Help me Obi-wan Kenobi, your my only hope!
Thanks.
Windows XP

See if Slow Imports can help.
Good luck.

Importing issues with FCPX 10.1.4

While trying to import video in FCPX (quicktime shot on the GY HM 100U) when the import window closes the clips are displayed as Missing Proxy in the event? I work on 4 other macs running the same software and cannot duplicate this problem. They all import fine? I've compared all the preferences and they seem to match. Anything else I'm missing?

Thanks...as always Tom you've resolved another one of my simplistic yet daunting FCPX issues.

Import issue FCPX 10.0.6

Similar Messages

Maybe you are looking for