Import issues in connection with selfmade video

Instead of following the iTunes instructions in detail and instead of no error message occures I can't find any video I imported into iTunes. I tried all possible formats (mpeg, avi, wmv etc.). Always the same poor result. Can't find the imported videos. Any solution idea?

itunes uses QuickTime to play videos. Try launching QT and dragging one of your videos into the QT screen.
Sometimes QT will give an error when iTunes does not.

Similar Messages

My mac Pro can't boot OS X, if it connected with iPod video

Hi All~ I have received the new Mac Pro, but I don't know why..... if
my iPod video(60G) had connected with USB ports of Mac Pro, then I can't
boot my OS system.... that seems the Mac Pro can't reach my hard
disk, because the apple log doesn't appear (nothing on the screen)
and everything is blocked, however when I put out the iPod, the Mac
would go into the system smoothly, I don't know why. there is no
problem with my powerbook or iMac G4 as the same situation to boot
the OS system. Is a new rule to start the system with Intel CPU?
Can anyone tell me what happen with my Mac Pro, does it have something wrong? Thanx
Reeeeegards,

Hi everybody!
I´ve a similar problem. However, in my case it´s not when I boot Mac OS X but when I boot into bootcamp with Windows XP. It takes a loooooooong time for the Mac to start the booting when my 80gig ipod is connected to the USB-port . Maybe you also have just to wait longer?
If I disconnect the ipod during this waiting period from the USB-port, the Mac starts booting immediatelly! Fortunatelly I´ve no problem when directly booting into Mac OS X.
Direct connection or connection via self-powered USB-hub, disk-mode or no disk-mode, ipod formated in Mac or Windows format, I tried everything, but it all made no difference. Any advice to solve the problem would be very wellcome.
By the way, I´ve another ipod connected via firewire, this is not causing any boot-trouble.

Issue when calling with Facetime video from iphone 6 to iphone 4

Hello,
I am trying to call with facetime video from my iphone 6 (ios 8.0.2) to an iphone 4 (ios 7.1.2) but it doesn't work. It works when I use facetime audio but not the video. I have tried to use my ipad 2 (ios 8.0.2) instead of the iphone 6 and I am experiencing the same problem. Can you please help me out here?
Thnaks!

The iPhone 4 would have to be on wifi for the video to come through, I think. Is the person with the iPhone 4 on wifi?
Can that person receive calls from anyone else using Facetime?
~Lyssa

Mac mini issue:lost connectivity with the wireless keyboard

I lost connectivity with the wireless keyboard and I can't unlock the lock screen.What can i do?

Sometimes powering the keyboard off by holding in the power button on the right end of the battery box and then after ten of so seconds powering up again will reestablish the connection. Other than that forcing a reboot using the power switch on the mini should restore the connection unless thereis something else going on.
If this is a recurring problem try replacing the batteries with fresh ones. If this keyboard has been paired with another bluetooth device such as an iPad or another Mac, unpair it from the other device.

Activation Issue - Blackberry Connect with e61i on...

Hi,
I have been using the Blackberry Internet Service on my e61i with Vodafone UK for the past 9 months.
Today I upgraded the e61i firmware to version 2.0633.65.01, and the Blackberry Connect 4.0 7.45.0, but I am unable to re-activate the Blackberry service with my operator, Vodafone UK.
I also tried the BB Connect 4.0 version that is recommended on the Nokia site to work with Vodafone UK, but no luck either - possibly as the new e61i firmware is not backwards compatible with the older BB Connect 4.0 7.17.2 release.
My guess is that Nokia have not validated the latest BB Connect 4.0 7.45.0 version to work with the e61i on Vodafone UK's Blackberry Internet service, but I am stuck?
I thought of re-installing the older e61i firmware that did work, but I cannot seem to find a link to download versions other than the latest release (via the Nokia software updater) from the Nokia site?

24-Feb-2008 10:30 AM
nihonsurfer wrote:
Ahhhhh, I am not alone :-)
I have posted already a couple of messages - no reply so far. I have done the same upgrade like Patrick- with German's T-Mobile. So, it does not seem to be the provider whi i sleeping here. I asked already in 4 Club Nokia Service Points and two already commented that Nokia is releasing theor firmware at times too quickly and before having validated the most important applications on compatibility.
I really, really hope that Nokia realises that all those potential eg. E61i fans are up against the Blackberry fraction and if they cannot maintain their BBConnect SW up-to-date they will loose a bunch of "business users" to their competitors which are hooked to a BB enterprise server with no choice of another corporate mail handheld system.
Just wanted to share this with you so that you don`t waste your time finding what YOU did wrong in your upgrade. Been there done that.
Pleeeaaasse submit if anybody has an idea.
nihonsurfer
i believe this link might solve the problem, i did the same thing but this version of the bbc software solves the problem, at least it works on vodafone uk :-)
http://www.businesssoftware.nokia.com/blackberry_downloads.php?note=&re=EMEA&op=Other&pm=E61i〈=

Issue in connection with database using SQL Developer.

Hi,
I am facing a problem in connecting to a remote oracle database, below are the configuration setting which i am trying to use in sql developer to make the connection
TNS Configuration Details (SUDHIR)
SUDHIR=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=52.12.xxx.xxx)
(PORT=1526)
(CONNECT_DATA=
(SERVICE_NAME=sudhir)
User : system
Password : xxxxxxxxxxx
Database : sudhir
Connect as : Normal
I got the above credential details from Onsite team I need to connect this in my local sytem SQL Developer I am proving the connection as below
Hostname : 52.12.xxx.xxx
Port : 1526
Service Name : sudhir
Username : xxxxxxxxxxxxxx
password : xxxxxxxxxxxxx
I get following error when say test connection in sql developer.
"The Network Adapter could not establish the connection."
Please suggest me using the above details how to make the connection success. Please let me know.
Thanks
Sudhir
Edited by: BluShadow on 30-Mar-2012 11:56
data anonymised by moderator

(o_0)
Hopefully for you, the machine is not reachable from internet !
Your giving online everything needed to log in as system ! that is quite dangerous. I guess the "Onsite team" would be pretty mad discovering that.
You should edit your previous post before too much people get to it.
Regarding your problem, I guess you can't get to the machine itself (maybe in a different network).
Can you try to ping it from your computer ?ping 51.17.130.121
This is a made-up IP, you'll have to replace with yours

Iputils issue, when connecting with netcfg.

I hope what I will do is correct to put it here.
I updated today iputils and suddenly I couldn't connect to my networks anymore.
I'm not an expert and I don't know exactly what was going on.
1) I tried to connect using netcfg to wireless with WPA security, and the result was dhcp lease attempt failed.
2) I tried to connect using netcfg to ethernet, same problem as before.
3) I used dhcp without netcfg and it connected correctly.
then I downgraded iputils and netcfg worked again.

Hi JimSmith,
Thanks for reply.
TNS entry as below:
ORCL_DB =
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 91.198.252.83)(PORT = 1521)) )
(CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED) ) )
It works fine if I choose TNS (Network Allias: ORCL_DB).
For the Basic setting:
Hostname = 91.198.252.83
Port = 1521
SID = orcl
The error I received when connecting to db based on Basic option is Failure -Io exception: The Network Adapter could not establish the connection.
Below are the entries of SQLnet.ora. Any entry should I add into sqlnet.ora?
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Appreciate your comment.
Thanks.
Regards,
Jia

Mini-DVI to video adapter connects with S-video cord

I see the picture, but no sound coming out of the tv. Sound only comes out of the MacBook. Any ideas?

Hi mrs.Kurle: The S-Video cord doesn't caryy an audio signal. To get audio to your TV you will need a cord from the Audio-Out/Headphone jack to the appropiate Audio input on your TV.
Stedman

I'm having a problem in FCP7 with all video transitions. Every transition has a rolling flicker throughout the effect. What is causing this?

I recently upgraded to FCP7 from FCP6. I am now having an issue in playback with all video transitions. When I add a transition to my video it does not consistently play smoothly. I now appears to have an old "film" like flicker rolling through the effect. Our video was shot on a dslr and brought into FCP with compressor as a prores 422 file. We use magic bullet for our coloring effects which are in place on this video. When I was working on the project in FCP6 I did not have this problem. When the project was complete we upgraded to FCP7. The client has now come back to us wanting additional footage. So I opened the old project up into FCP7 and checked yes to all format updates to meet with FCP7 guidelines. So far this is the only problem I've encountered. Any help would be greatly appreciated.

Hello!
For me it looks like conflict with field order (upper, lower - interlaced).
Please, check Your sequence settings, maybe it should be set to "field order NONE" if Your source is progressive.
Next thing You could check:
in Your timeline with bad transitions look into "Effecs tab" - maybe FCP 7 added "shift field filter +/-1" after opening FCP 6 project.
In general - try to keep sequence settings same as source settings.

Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
Thanks for any and all feedback-
stratman1

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

Okay, still trying to get my import issue resolved.
I have a SONY HDR-HC3 DVmini.
No problems with iMovie 3 on my Powerbook.
iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
My buddy thinks it might be a Quicktime issue.
He said to download Quicktime Pro, that might resolve this issue.
I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
THANX

Hi
Can be so much.
Often Camera has to be connected to Charger/mains during Capture.
An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
My list on this
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

New to FIOS with several video issues

I switched to FIOS from Comcast four days ago and now have several intermittent video and guide issues I never experienced with Comcast. I've read many posts about the new firmware (1.7) which is rolling out this month, and was hoping to get some clarification on whether these issues are addressed with the update. Sorry if I am re-hashing issues already discussed, but I just want to be sure I'm dealing with the same problems as everyone else. The 2 STBs I have are the 7216 and the 7100. Both are connected via HDMI and both are v. 1.6.2.
Issues on both STBs
- Video and audio drops out for a second on HD channels, just a black screen. This occurs sometimes when switching to another channel, and usually does not recover unless I switch to another channel then back to it.
- When switching channels, the channel does not change, even though info bar does change and shows the desired channel (if I switch back and forth between channels it will eventually switch correctly. This issue can occur using the Channel up-down button, the "Last" button, or using the number keypad.) Also, the opposite sometimes occurs - the channel changes, but the info bar takes several seconds to catch up.
DVR (7216) only issues
- Pixelation when trying to rewind live video (video remains live but corruption occurs llike it is trying to rewind) . Going to another channel and then back usually makes normal rewinding possible.
- Signal drops when playing a recorded program (no audio and snow for a second or two). However, it is not the recording itself since it does not occur in the same place if you rewind the recording and play it again. This is almost the same kind of drop mentioned above, but there is snow instead of a blank screen.
I'm debating on going back to Comcast. I love the FIOS features, the extra HD channels, and the deal I got with Verizon, but it is all useless without stable performance.
Any feedback is greatly appreciated. -Mike

MikeC wrote:
Update: Switched from hdmi to component cables and this seems to have corrected the video and audio drops both on live TV and DVR playback. No noticable difference in picture quality. Still sometimes get a very short skip, especially the audio right after changing channels, but nothing significant and no more than what I experienced with Comcast (probably would not have even noticed if I didn't experience the bigger problem).
Still experiencing the same intermittent bugs when changing channels. The 7216 STB doesn't always change channels, although the info bar reflects the switch. The 7100 is the opposite - channel changes but info bar has long delay. Also on the 7216, still have issues backing up live video. It appears that the buffer becomes corrupt now and then. Could just be a bad drive which may be causing the channel changing issue as well. Resetting the STBs and router had no effect.
I should be getting 1.7 update soon and will see if this corrects any of these issues. I will also switch back to HDMI after the update and will post my findings
Most of what you described are supposed to be fixed with 1.7. And as you saw most of it was fixed by switching to the component cables. Those items that are fixed by this are the ones that are being focused on with the 1.7
However, the problem with the info bar not changing in a timely manner. This will likely not be fixed. Those that already have 1.7 still have this issue. Also I've noticed lately that both my DTV DVR and my TIVO are both starting to do the same thing as my 6416 Verizon. (I have DTV with Tivo at another location). All three DVR's on two different companies are doing the same delay of 3-5 seconds when changing channels before the info bar changes. I watch the boards here and dont see any solutions and both DTV and TIVO said it is just a delay in the software on the DVR and that there is nothing they can do about it. It sounded like a cop out but since it is happening with 3 differnt manufactures and on two different companies, I'm not sure where to put the blame on this one.
the short skip that you see when changing channels is normal. usually this is when the resolution of the program changes especially when going from SD to HD. I've seen this on every digital system I've ever used. Dont think this is anything to be conserned about.
The problem with the box not changing channels. This is another story all together. This is one to be worried about and work on correcting. Does it only happen when using the remote? what if you use the channel up and down on the box itself? will it do the same with the other remote from the other box? Have you tried calling TS and had them reset the box yet?
====================================================================================
Error exists between keyboard and chair.

My mac air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbook that is able to connect with no issue. HELP

My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP

Reset the TC to factory and start again.
Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
I also recommend different names for the different bands.
So for example.
TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
WIreless name.. TC24ghz for 2.4ghz
TC5ghz for 5ghz
You can also set the channel manually.
If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

How can I resolve the issues connecting to my wireless connection with my Apple tv?

Ive had my Apple tv for about a month now & I still have not even used it for what I actually got it for. It allows me to use the airplay feature with my ipad2. But when I try to use the home sharing feature it never connects with my apple ID. At first I thought that maybe I'm just typing it the wrong way, but then I used the same ID and password to purchase an app on my iphone & it works. It's not my wireless connection because multiple devices connect to it just fine, without any issues. I tried reseting it, that obviously didnt work. I really just dont know what else to do.

you can't rely on airplay mirror some apps support the old in app airtune audio only option if the video app in question does you can do it from the apps settings somehow
if not then you need a airport express which does pretty much what airplay mirror on the Apple TV does but it's a audio only

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Import issues in connection with selfmade video

Similar Messages

Maybe you are looking for