Import jpg in PRE13 is not working

I just downloaded Premiere Elements 13 to create a slideshow. Whenever I try to import my jpg files, I get an error message.
I resized all files to 4096x2731 pixels with PS Elements 9 but it is still not working. Does anybody know how I could fix this problem?
Thank you for your support!

Lena
1. First thing, I need to make sure we are in sync on...where are you trying to create this slideshow?
I have been assuming in the Elements Organizer 13/Create/Slideshow workspace. Is that correct?
2. If so, open Premiere Elements 13 Editor to its Expert workspace, and import these problematic jpgs into a new Premiere Elements Editor project, using Add Media/Files and Folders/Project Assets. Do you get that far without any errors?
3. Can you open jpg stills with no raw image origin in Premiere Elements 13 Editor or Elements Organizer 13/Create/Slideshow?
Thinking ahead to another mini test..
For troubleshooting purposes only at this time, can we take Lightroom out of the equation?
Will your original raw image import into the Camera Raw version that you have in Photoshop Elements 9? If so, import the raw image there, edit in the Camera Raw dialog, from Photoshop Elements save as jpg and resize jpg. Does that jpg from Photoshop Elements now import without issue into Premiere Elements 13 Editor and or Elements Organizer 13.
We will be watching for further developments.
ATR

Similar Messages

  • Import of Word Document is not working

    Hello, I wanted to import a word document but it is not
    working. Draging droping is not working (just puts me link) and
    through the menu (File > Import > Word Document ... ) is not
    working.
    Does somebody knows why.
    Here is an image:
    Image
    Dreamweaver Menu

    Good catch! Thanks, Alan.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Alan" <[email protected]> wrote in
    message
    news:C5B334E2.31EDC9%[email protected]..
    > your first screenshot-
    >
    >
    http://www.janik.cc/b/dreamweaver-word-im.jpg
    >
    > shows an icon in the bottom bar for OpenOffice.
    >
    > Does that machine have Word installed?
    > Dreamweaver doesn't import the .doc file directly, it
    uses part of Word to
    > do it. If Word is not installed, the Word import into
    dreamweaver will not
    > work.
    >
    > --
    > Alan
    > Adobe Community Expert, dreamweaver
    >
    >
    http://www.adobe.com/communities/experts/
    >
    >
    >

  • Import - sort by "media type" not working?

    When importing media from my iphone I'd like to ONLY import jpgs, not the mov files. In searching, the sort option in the import dialog on "media type" should work so I can easily just select new jpg files, however this does nothing for me. Is this supposed to work? I'm running OSX 10.7.2 and LR 3.6.
    Any ideas? Does this sort function work for anyone?
    Thanks!

    Ok.  Never mind what I said about selecting the sort order before selecting the folder.
    I just checked again on my computer and (LR3) was able to sort by media type, by date, by name etc. from a folder on my desktop drives.
    It even worked when importing from a media card.  This is weird.
    Although everything seems to work for me now however I do remember having encountered the same issue before.
    There might be a bug.  It would be nice to have someone from Adobe or LR to explain the limitations if any of this sort function.
    Good Luck Marty.

  • Import from Final Cut Pro not working correctly

    I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
    I exported the project as an XML file and imported that into Premiere Pro empty project.
    I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
    Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
    There are no markers.
    Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
    The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
    The keystrokes to move to markers do not work.
    The "Clear all Markers" function is greyed out , like it is when no markers exist.
    If a "Dynamic link to Encore is performed, there is no markers in Encore.
    If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
    Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
    However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
    FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
    I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
    I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
    Thank millions for a solution.

    It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo.  I had been using Final Cut Pro without any problems right until I upgraded to Yosemite.  I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating. 

  • EXPORT/IMPORT through FMs in BADI not working

    Hi Experts,
    I have checked several posts and implemented my requirement but it's not working. PFB my requirement:
    We have a BADI in which I need to EXPORT an itab and the same is to be IMPORTed into ZFM. I have created 2 FMs under same FG. Now, in the FM which is being called in BADI i have EXPORT and in ZFM i have IMPORT. Code is given below:
    FM from BADI: ZBADI_FM
      IF lv_flag EQ 'X'.
        EXPORT gt_msg TO MEMORY ID 'CHANGED_DATES'.
      ENDIF.
    Another ZFM under same FG: ZFM
      IMPORT gt_msg FROM MEMORY ID 'CHANGED_DATES'.
    gt_msg is declared in TOP that is common for both FMs. However, IMPORT is not happening. I am not getting the values that I exported. sy-subrc is 4.
    Can anyone help me out? Your help is appreciated.

    Hi,
    I can't believe that it will work:
    EXPORT TO MEMORY
    A data cluster in the ABAP memory is available to all programs within a call sequence, whereby data can be handed over to called programs.
    call sequence
    This sequence is created if you can return from the called program to the calling program at the call of an ABAP-Program with SUBMIT ... AND RETURN or CALL TRANSACTION. For this purpose, the data of the internal session of the caller remains on a stack. The programs of a call sequence have collective access to the ABAP Memory. A call sequence can be left completely using the statement LEAVE TO TRANSACTION.
    Regards,
    Klaus

  • Premiere Markers export and import: Roundtrip via FCP XML not working

    The objective of my project is to create a sports app that records markers and saves it in different formats of XML / CSV that I can then import in different NLE packages.
    I have already succeeded with Vegas Pro but also want to support NLEs for MAC-OS.
    In order to approach this analytically I have exported a very simple project with 1 sequence including 1 clip and 3 markers (with length zero and length > 0) and exported it
    in FCP XML from Adobe Premiere CC and do a round-trip import it via FCP import into Adobe Premiere CC.
    This round-trip does not work. Any insight why or any support what other mechanism will work?
    Thanks
    Thomas

    let's go back to the purpose:
    I have written a mobile app on which people can during a sports match capture the time of the important moments by pressing buttons.
    I then convert the time information into an XML or CSV file that can be read by the different NLE. Given that Sony Vegas allows to import
    markers independently from a sequence. Now I look at the same things for Premiere. This allows to edit the highlights very quickly vs watching
    the entire match coverage again.
    I try to replicate that on Premiere through the FCP XML, but now that the roundtrip works, the issue is that FCP XML in its structure wants a sequence.
    I could imagine to provide a dummy sequence that can be overlayed by the real content just to preserve the markers. Any ideas?
    Regards,
    TK

  • Import email from apple mail not working

    I have a simple applescript which imports emails from Apple Mail into filemaker
    tell application "Mail"
              set theSelection to selection
              set theMessage to item 1 of theSelection
              content of theMessage
              set the clipboard to content of theMessage as text
    end tell
    This works in the Old Apple Mail in 10.6 but Lion changes everything doesnt it. This is not working in the new Mail 5.1. It will import the first message in the string but not the HIGHLIGHTED message which may be in the message string of 3 or 4. I want it to set theMessage contents of the highlighted message. Does anyone know how to select the highlighted message in a string - sometimes called the selected message. Thanks

    Use and methodically follow the troubleshooting steps in Apple's OS X Mail: Troubleshooting sending and receiving email messages located at http://support.apple.com/kb/ts3276

  • I have a few important add-ons that will not work, yet, with Firefox 4. How easy is it for me to downgrade to 3.6 temporarily until these issues have been resolved?

    I really need to downgrade to the previos Firefox version just until a couple of add-ons have been upgraded. How easily can I do this without losing my current settings?

    There is no guarantee that the add-ons that currently do not work with Firefox 4 will ever be updated, they may have been discontinued.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • IMPORTANT - Sound on iPod Touch not working

    My iPod touch 4g has been exposed to water, and now the sound does not work. If I plug it into a docking station, the audio will work, however, when I take it off, there is no volume slider. My headphones worked earlier (whenever I plug them in, Voice Control comes up), and the audio worked fine. However, now the headphones do not work! The speakers do not work at all since water contact.
    Please help me. I am panicking a lot now.
    Kai

    Assuming the iPod is now dry:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a hardware problem caused by the water.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the others. They do not fix yours.
      Apple - iPod Repair price             

  • Importing photos from Photo Stream not working properly

    I've been trying to work out a way to import photos on my iMac and have Photo Stream push them to my MacBook so they end up in the same Event on both computers. If I have Automatic Upload turned on, the photos I import on my iMac get uploaded to Photo Stream before I get a chance to place them into my intended Event. So I tried turning Auto Upload off, importing photos, placing them into their proper Event, turning Auto Upload back on, and then dragging them to Photo Stream to upload them.
    First, it seems like there should be an easier way. But also unfortunately, even though Help in iPhoto 11 (9.2) seems to say this should work (see below), my photos end up in my MacBook's Photo Stream folder, but not in the Event (with Automatic Import turned on on my MacBook). This is what is written in the Help documentation -
    Note:  If iPhoto automatically imports a Photo Stream photo that was originally uploaded from a different iPhoto library, or from an Aperture library, iPhoto adds the photo to the Event that matches the one in the original library. If a matching Event isn’t in the destination library, iPhoto creates a new Event with the same name.
    I wasn't able to find the photos anywhere in my MacBook Events. As indicated in the note above, they should have been automatically placed in a matching Event of the iMac's library. Any help is much appreciated.

    Ever since I went to the cloud all of my new photos have show up in photo stream. I had hoped it would sync and update the events in Photos, no luck. I also uploaded a numbers document to iWork and and could only access it through Safari. The only option I had to actually open it on my iPad was 'open in iBooks'. Really! There's been other occasions of rocky starts so I hope iCloud improves. It has too.

  • Import javax.media.* is not working

    Hi,
    I'm new to java and i was trying to create a media player using the javax.media package from the JMF. I installed it using the windows setup and it seemed to install correctly. Testing it with the java.sun.com applet tester worked. The media player is also working...
    The only problem is that when i import javax.medis.* it gives me a compiler error:
    package javax.media does not exist
    my code is as follows:
    import java.applet.*;
    import java.awt.*;
    import java.net.*;
    import javax.media.*;
    public class PlayerApplet extends Applet {
         Player player = null;
    public void init() {
         setLayout( new BorderLayout() );
         String mediaFile = getParameter( "FILE" );
         try{
              URL mediaURL = new URL( getDocumentBase(), mediaFile );
              player = Manager.createRealizedPlayer( mediaURL );
              if (player.getVisualComponent() != null)
              add("Center", player.getVisualComponent());
              if (player.getControlPanelComponent() != null)
              add("South", player.getControlPanelComponent());
         catch (Exception e){
              System.err.println( "Got exception " + e );
    public void start() {
         player.start();
    public void stop() {
         player.stop();
         player.deallocate();
    public void destroy() {
         player.close();
    } Could someone please help me out here... i've tried all the few probable solutions... but to no avail...

    Well changing the classpath to the correct one still didn't work.... but i still found the solution.
    The Developer Environment that i use is JCreator and it seems it ignores the classpath and has its own settings for the class path... changing this also didn't work.
    What worked was copying the Jar files from the JMF2.1.1e installed location into the path of the original classpath

  • I am working with someone who imported their Outlook, then uninstalled Thunderbird; they now want to re-import Outlook and it will not work. What should I do?

    I am working with someone (my boss), who wanted to import Outlook into Thunderbird. I helped him to do this. For reasons unknown, he then uninstalled Thunderbird etc. He now wants to repeat this process; however, Outlook will not import now. The import freezes about half way through. How do I help him? I'm not sure if the issue is with Outlook or Thunderbird. I suggested we revert back to the original Outlook files he had saved when we first did the import and try again (to see if the issue was with a corrupted file in Outlook etc.,) but he has since updated that. I believe Thunderbird was correctly uninstalled, so, I'm not sure where the problem exists...I'm even less sure how to fix it.
    Nicole

    Yeah, I went back and removed the profile folder using the info below. That appeared to remove all the original files.
    http://www.ehow.com/how_8102988_uninstall-thunderbird-completely-then-reinstall.html
    Still no go. :/

  • Lr5 does not import from d800 tether does not work either.

    When i connect D800 to my Win7pro laptop win sees the camera but LR5 does not.
    It freezes when i try to import and it does not recognize it for tether, I can tether other program.

    @Denyerec, Hi! Just so you are aware this is a user to user forum so the replies you will get here are mainly from users like your self. To have someone understand exactly what your problem is and respond with anything constructive you will need to supply a lot more details.
    What system are you useing Mac or PC what OS? What are you attempting to do when you have a problem? Do you get an error message? If so exactly what does it say? Was Lightroom working properly prior to this problem? Is your camera a Nikon D800 also?

  • Importing bookmarks in FF32 does not work. I have tried swapping places which has worked before, I have tried import in the bookmarks menu.

    This is a windows 8 computer that was RESET yesterday that I am attempting to set up again.
    I have copies of the bookmarks on another drive (and actually on another windows 8 computer running FF27) - I can not move the bookmarks onto this reset computer.
    I have not attempted to move the whole profile yet just places and also tried export /import bookmarks.
    I have just reinstalled FF32 and have the same problem. Yesterday I was successful in moving "places" onto the windows 8 computer with FF27.

    somehow it is now working - it wasn't a few minutes ago but I do have bookmarks now and can add them
    I tried lots of the suggestions - "You can try to delete the prefs.js file and the compatibility.ini file to force Firefox to reinitialize the profile." - tried it but it alone wasn't enough
    I also installed Java during this process - it was probably needed and might be automatic to a techie but I am a mathematician not a computer person. I know I had installed java in the last few days but it wasn't visible in a search for the word java so I downloaded it again.
    I took bookmarks back up file, places.sqlite, and bookmarks off the working Win 8 machine and tried to move them into the right spots in the folders - didn't work at first
    I discovered the date on the working Win 8 machine was a day off and so when I opened a backup bookmark that was old enough with all the other changes I had made it finally worked.
    I see now where the bookmarking star has moved - I liked the star in the location bar. I normally just use history. I also do not like the tabs on the top and other toolbars hidden away and change some of those on install. I will change these two Win 8 to my liking over this week but all of those changes were not urgent.
    I have relinquished control of that Reset PC back to its "owner" until the next disaster. I know I have one program left to install (no rush I was told) and a handful of files to straighten out still but this last thing is status quo around here.
    Thank you for all the ideas.
    There is also System # 4 - Windows 7 with FF31 which is my main computer - System #2 exists as it was bought for me but I have not used it. I hate Windows 8 and hate the idea of moving all my files onto it. But there are enough problems on this CPU that if I gave it away as a hand me down I would spend too much time trying to fix it for my spouse so they got a brand new PC instead to replace XP. When I gave them the XP they got it "clean" with a new install of XP on a just cleaned HD.

  • Importing home recorded DVD footage not working. File names are grayed out.

    I converted a VHS tape to a DVD with a machine my cousin owns. It all plays fine in DVD Player but I can't import the files into iMovie 09. All the filenames are grayed out in the import dialogue box.
    How can I make it work?
    Thanks in advance!
    I have a "VIDEO_RM" folder with (.BUP, .IFO, .VOB, BUP, .IFO, VOB,files)
    Also hav"VIDEO_TS" folder with the same types of files.... none of the files are importable into iMovie 09 and none of them seem to work inside quicktime. But they do play in my VLC player.

    Thanks a lot! I will try this as soon as I can. Sorry for not finding this for myself. I did a discussion search on the subject, but not as thorough as I should of I guess.

Maybe you are looking for