Import Keynote Slides into Imovie

Is it possible to import a Keynote slide into Imovie? If not, is there some way to create a "call out" word balloon and make it appear with a still photo in Imovie?

photoBob6 wrote:
Is it possible to import a Keynote slide into Imovie?
sure ..
https://sites.google.com/site/karstenschluter/how-to-make-a-vidcast/keynote
demoes the usage of Keynote with iMovie.
you can use 'animated' presentations or single 'charts' as jpegs ..
.. If not, is there some way to create a "call out" word balloon and make it appear with a still photo in Imovie?
two options:
• prepare the still in some 'paint'-app, demoed here:
https://sites.google.com/site/karstenschluter/how-to-make-a-vidcast/movie-magic- with-stills
• use the 'transparent-png-trick', demoed here:
https://sites.google.com/site/karstenschluter/imovie09tricks

Similar Messages

  • Importing Keynote slides into Pages

    I'm new to a Mac. I'm doing a copy and paste of Keynote slides into a Pages document. The quality of the slide image is very poor when printed. I've done this many times before in Windows (with PPT and Word) and the quality is very high. I thought it might be the slide template I chose but then tried several others and the quality is still poor. Anybody have any suggestions?

    Briarlynn
    Why not check what it is you are getting when you copy and paste?
    Is the entire slide being rasterised to a bitmap?
    What resolution is the original slide and is it being changed when you copy and paste.
    More to the point is how are you printing the final Pages document?
    If you are going to .pdf file first and there is transparency, reflections or shadows then that will be rasterised to a low 72dpi thanks to Apple's bad settings in OSX's ColorSync filters.
    If the Keynote images look fine in Pages even when you zoom in on them, then the problem very likely is the ColorSync filters.
    Peter

  • Importing keynote slides to imovie

    I'm trying to import a slide from keynote to use in imovie.  How do I go about this?

    haha, nice response.
    HAVE YOU TRIED ADDING THE AUDIO TRACK IN IMOVIE RATHER THAN IN KEYNOTE?
    (I'm just guessing, I haven't tried this myself)

  • Can I Integrate Keynote Build Slides Into iMovie?

    It's me the Mac/iMovie newbie with another question...
    Is there a way I can integrate a 'building' Keynote slide into an iMovie project?
    Your help and/or direction is very much appreciated!

    Thanks again AppleMan, will try this tonight!
    Once I export to QuickTime, where do I find the QuickTime file, and how do I pull it into my project?
    Apologies if this is a dumb question once again!
    Cheers!

  • Can I import DVD's into imovie HD

    Here is my question. I have recently had some photos taken of myself and the photographer gave me an actual DVD (like a movie that you can watch on a real DVD player) of the proofs in a slide show. I would like to post this movie (it's short) on my iweb website but can not figure out a way to import the DVD into imovie HD so I can then make it smaller for use in iweb. Any suggestions?
    Thanks

    Hello Jonathan,
    you will have to convert the files contained in the DVD to a format readable by Quicktime. Normally you would convert the DVD to full quality DV format but as you are going to post it on the web, consider resizing it (e.g. 320x240) and using a suitable codec (e.g. Sorensen3 or MPEG-4). A movie in DV format would be too large a file to view online.
    some reading on how to get the footage off the DVD:
    Dan Slagle's Unofficial iMovie FAQ
    Using Mpeg (DVD) footage
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    Matti Haveri's website
    How can I edit MPEG or convert DVD or MPEG to DV
    http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
    Tools:
    MPEG StreamClip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    Apple MPEG2 PlayBack:
    http://www.apple.com/quicktime/mpeg2/
    DVDxDV
    http://www.dvdxdv.com/
    DIVA
    http://www.versiontracker.com/dyn/moreinfo/macosx/17899
    hope this helps
    mish

  • I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge.  Did not have trouble until I upgraded to mavericks.  I have a mac book pro, 10.9.1, iMovie 10.0.2.  Says it is recording, but when I go to check, it says the file is empty.

    I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge.  I have been successful doing this in the past, but now it is not working.  I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2.  Everything in iMovie looks like it is working.  It reads "recording" in the upper left hand corner of the pane while the video is playing.  When I stop the process to check on my clip it says that the file is empty.  The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously.  My system is about one year old.  Any suggestions?

    Hey, Clinton,
         Thanks for your help!  I was able to go to iMovie 9.0.9 and import video.  I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support.  They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded.  That didn't change anything.  In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge.  But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2. 
         1.  Open iMovie 9 (finder/applications/iMovie 9.0.9
         2.  Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
         3.  Close iMovie 9
         4.  Open iMovie 10 (probably in the dock)
         5.  File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events.  Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.) 
         6.  Select the clips and import.  Click the blue "Import Selected" button on the bottom right.
    You may get a message that some files cannot be imported.  Click continue import.  It's a little glitchy.  It imports your clip, and also makes a copy of it, too.  On the copy, the audio is normal, but the video is choppy.  In any case, you would delete the copy, anyway.
    Hope this additional information helps somebody else.  Thanks again, Clinton for helping me!

  • How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done?

    How can I import a movie into iMovie 09 from a hard drive?  The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import.  Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC. 

    No unfortunately it won't open in quicktime either.  It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected.  VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB.  All of which cannot be opened or selected.
    Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC.  Is that the same?  Thank you for your time and response.
    CaCanuck

  • Importing a video into iMovie

    I have a Sony SLT-A33 DSLR camera and I am having a problem with importing video files into iMovie. The camera records in two different formats 1920x1080 50i AVCHD and 1440x1080 25p MP4. I have heard that using 1440x1080 with 25 fps progressive MP4 will give better results so i filmed around 10 mins and when i plugged my memory card into MBPR iMovie did not find any importable files.
    I then used a different memory card to check if something is wrong with card but iMovie found nothing again, however when recorded in AVCHD 1920x1080 50i iMovie can import.
    I also have Aperture 3.4.4 installed and it recognised the MP4 files and imported them into Aperture library. I could then access the MP4 file through Aperture library in iMovie but the playback is very laggish and editing is almost not possible.
    Could you advise me on what format I should use?
    1920x1080 50i (interlaced) 25fps
    1440x1080 (progressive) 25fps with pixel ratio of (1x1.333)
    How can i import the files into iMovie for editing?
    I was also looking at FPCX but being a bit pricey, I decided not to get it. Should I invest in FPCX?
    I am using Macbook Pro Retina (Mid 20120
    i7 2.3GHz - 3.3Ghz Turbo Boost
    8GB 1600MHz Ram
    Nvidia GT650M 1GB
    256GB Apple SSD
    Mountain Lion (10.8.3)
    All softwares are fully updated.
    Thanks

    I don't have your camera, but this is worth a try...
    Try importing your MP4 files by using FILE/IMPORT MOVIE... and navigate to your camera card to select the MP4 files.

  • Importing quicktime file into iMovie 11 resulting in distortion

    After having trouble importing Quicktime files into iMovie hd6, I decided to buy iMovie 11. So the file imports without squishing the image into 4:3 as it did in iMovie hd6, but now the movie has a strange strobe like flashing that is not present in the original.
    Any ideas?

    See if you can open the file in QuickTIme PLayer. Click Command-I (or WINDOW/INSPECTOR) in QuickTime Player. Tell us what is listed by the word FORMAT:

  • Cannot import Finalize movie into iMovie

    I have a Sony DCR-DVD103 and when I go to File>Import Movies I do see my Finalized DVD, but all the files including the Import button are grayed out. How can I import the Finalized movie into iMovie?
    Upon connecting the Video Camera to my MacBook Pro, DVD Player launches. I quit DVD Player and go to iMovie>Import Movies, but never see how to import the movie into iMovie.

    I have a Sony DCR-DVD103 and when I go to File>Import Movies I do see my Finalized DVD, but all the files including the Import button are grayed out. How can I import the Finalized movie into iMovie?
    The "Import Movies..." option is for importing "edit" compatible files from a hard drive into iMovie '08. If the source files are not already "edit" compatible, iMovie '08 will not let you import them. Instead, try the ""Import from Camera..." option. If iMovie '08 properly recognizes you DVD camcorder, it will import your MPEG2/AAC content by converting all MPEG-2 "P" and "B" frames to "I" frames (which are editable), convert the AC3 audio to AIFF, and place both in an MOV file container with start and/or end time offsets to minimize drift between audio and video. The resulting file can then be edited in iMovie '08.
    If the camcorder is not recognized by iMovie '08, then you will probably have to import the MPEG2/AC3 files to you hard drive and manually convert them to an edit compatible compression format manually using an MPEG-based, third-party conversion application like iSquint (free), MPEG Streamclip (free but requires $20 QT MPEG-2 Playback component), FFmpegX, (donation-ware), Visual Hub (pay-ware), MPEG2 Works (pay-ware), or similar application.

  • When i import a video into iMovie the quality gets very ******,but when its not in iMovie it looks awesome

    when i import a video into iMovie the quality gets very ******,but when its not in iMovie it looks awesome, please help

    Exact same problem

  • Importing mov files into iMovie events

    Hi
    This is my first post ever on this site. Here goes!
    I am new to iMovie, but have had someone more experienced trying to help but to no avail!
    I am trying to import mov files into iMovie Events. However in the file menu there is no "events' option, so I chose 'Import Movies'. But ultimately when I click on the mov files they are greyed out.
    The version of iMovie I have is iMovie '08 - 7.1.4
    When I first opened iMovie it offered to update to the latest version, but in the end it said 'No updates available'. When I looked into this in the Apple Store, it said you need Mac OSX 10.7 or above to get the latest version. My Mac is 10.6.8, so won't support the latest version. However, can I not still use the version I have? What is wrong here?
    Any help much appreciated - thanks.
    Ermina.

    If you don't get an answer here, you might want to post your question in the iMovie discussion here.

  • TS3355 I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

    I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

    It depends on the type of video. iMovie will only import video that it can edit.
    In general, you would use FILE/IMPORT MOVIE...

  • When I try to import mov files into iMovie'08 (7.1.4) the files are greyed out. Any suggestions?

    When I try to import mov files into iMovie '08 (7.1.4) the files are greyed out. Any suggestions?

    Hi Appleman - thanks for your guidance.
    OK RealTime Inspector: Dimensions of my clips - as I don't know which bit this is I will list everything under Inspector, including Format:
    00117
    00117
    33.30
    Format:MPEG-4 Video, 1280 x 720 millions
    AAC, 2channels, 44100Hz
    FPS29.97
    Data Size2.57GB
    Data Rate 10.20 Mbits/s
    Current size 1280 x 720 pixels (Actual)
    And re the types of tracks you mention that iMovie '08 can't import, I don't much about film clips so haven't yet made sense of this, tho I do see that the clips are organised into chapters, so presumably this is 'chapter tracks'?
    Thanks - I'll await your further instructions :-)

  • Import iTunes movie into iMovie or Motion

    I am a teacher and I wanted to show the movie Hocus Pocus to the kids at my elemtary school. But the school doesn't allow movies with ANY language. I would like to be able to import this movie into iMovie '11 or Motion 5 and block out the cuss words. This is a protected MPEG 4 video, so, none of these programs will let me do this! Any suggestions? (Please don't recomend any video convertors unless they're free, don't have a time limit, and will work with protected MPEG's) THANKS!

    You cannot edit the movies and you cannot legally remove the DRM.
    You can't show movies in school unless it is part of the curriculum (the movie actually pertains to the studies). Simply for entertainment is not permissible (without copright owners permission).
    -> http://www.teachwithmovies.org/copyright.html

Maybe you are looking for

  • What is the best frame rate to use for movies watched only on computer scre

    Hello all, I'm UK based, and so use the PAL system of 25 fps. This works well enough if I want to make a DVD, but I'm now starting to work on projects that will only ever be seen on You Tube or Mobile Me - that sort of environment. A portion of my wo

  • Typing audio that isn't on slide playing when published

    using Captivate 4 when I publish my project, a typing noise appears at the beginning of the project. There is no typing on the first slide at all, and the only audio file is some music. I don't hear it when previewing. any ideas?

  • Don't See Photos on iCloud

    So I recently paid to have the extra storage on iCloud so I could backup everything on my 5s, including my camera roll.  After just completing a backup, which was just over 13GB in size, I can't find the photos anywhere on iCloud.  I checked my setti

  • ITunes 11 airplay stops in middle of songs, why?

    We have iTunes 11 on a MacBook Air with Lion (10.7.5, all current updates). Occasionally, in the middle of a song playing over Airplay, iTunes stops streaming the song. As best we can tell it appears to be random. If we go back to a song that it prev

  • About making an application bilingual

    hi, iam doing an application which needs arabic and english versions for GUI.\ currently iam keeping all labels in resource properties files and retrieving all labels from that file while displaying in GUI.is this the correct wat to use resourcebundl