Import language (SMLT) after EHP 03

Hello,
we started with a few languages in ECC 600 directly imported after installation. But now we have to install another 2 languages. But meanwhile we have "upgraded" the system to 603 via EHP...
If I start the SMLT import a package is found, but the checks of the package shows me there are different version from the language package (SAP-APPL 600) and the system version (SAP-APPL 603).
How can the language be imported ?
How to enable the "unconditional modes" in the import of language packages ? (use mode u8 in import, warning instead of error in component test...) These possibilities are grey and cannot be chosen.
I know the notes 195442, 352941 and so on. But these notes only tell to import the main version and load the language parts of all imported support packages. But as stated before the import is not possible due to the package test and 600 <> 603...
Kind regards, Hinrich

Hi,
Please see the below link if this can be help it.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a3/30ad5296b511d384bb0060975b04f3/content.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/241a98969311d384bb0060975b04f3/content.htm
Anil

Similar Messages

Language import using SMLT

Hi,
I'm trying to import the French language into a 4.6c R/3 IDES training system. In transaction SMLT during the import process i'm having an issue with the path for the language packages. How do i point this to Front End Cd drive? Whatever path I put in there, it returns with an error, "Specify a valid path". I've tried copying the files to the local SAP server in a directory, for example to C:\lang and entering this into the path, but still have no sucess.
According to this : -
http://help.sap.com/saphelp_nw2004s/helpdata/EN/a3/30ad5296b511d384bb0060975b04f3/content.htm
There should be an option to "Load from Front End", this I don't have to can't see.
Thanks for your help!

Hi Tin,
check below things
Before you start transaction SMLT for language import, you must configure the required languages using the RSCPINST report. For more information, see SAP Note 42305.
In SMLT, the names of the imported language packages are only displayed with up to 12 characters. Therefore, language packages with longer names (up to 20 characters) are truncated.
Also check
http://help.sap.com/erp2005_ehp_02/helpdata/EN/21/5532d395ea11d384bb0060975b04f3/content.htm
Regards
Ashok

SMLT - Import language cancelled

Hello
I'm in ECC 6.0 and during import language (french), in client 000,
system started ran a backup , and... import language cancelled.
When I tried to restart import language with SMLT transaction, I get
the error message regarding to Lock.
I have tried "abortimp" and certanly now is not already locked but the
icon (truck) changed , now is a " X" , and if I try to restart I get
following error message:
message number:STRALAN_MSAG032
The action was cancelled and cannot be restarted
Any idea?
thanks and regards

Hi,
Please retry to import the complete language package for the french language using 'Import package", not "Restart".
Cheers!

Language change after update to Lightroom 3.2! Help asked!

I use Lightroom from the first version and love to work with it. I always work with the English version of it - for several reasons - even when my Windows XP version is in Dutch.
By upgrading to Lightroom 3.2 I selected the English language. After the update my version of Lightroom 3.2 however was in Dutch. I tried to change that to English following the help file, but that does not work
This unwanted change gives me a lot of trouble now as I normally import my pictures with a filename in the date-number format. But the date format in the Dutch version is day-month-year, as I however want to use - and used for over 50.000 pictures!!! - the year-month-day format. I had no trouble with it in Lightroom 3.0. My trouble began after updating to Lightroom 3.2.
Can anyone help me here, as I cannot import pictures I made in the right format now!!!
Ton Soneveldt

The answers is in this thread: http://forums.adobe.com/message/3042985#3042985.

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

MSSQL 2008 - Database size getting smaller after EHP upgrade??

Hi All,
Did anyone observe the DB size of MSSQL 2008 after EHP upgrade?
In my two system, after upgraded to EHP5 and EHP2 respectively, the database is getting smaller compare to before upgrade, estimated 5-10gb.
EHP upgrade is unlike DBEXPORT, it shouldn't have any reorganization features and so do MSSQL.
Any idea?
Cheers,
Nicholas Chang

> Right after upgrade is smaller and after sgen, db size is bigger than source.
So it's ok.
> As system was upgrade from ECC6 to EHP5 with Central Application, HCM and Finance .... the after upgrade size should bigger than the source even before SGEN. Your kind input is mostly welcome.
If the source system was compiled completely (using SGEN) then you need to compare the sizes of the target system also, otherwise you compare apple with pies.
Another reason may be that index compression was activated:
Note 1459005 - Enabling index compression for SQL Server
You could now upgrade to SQL Server 2008 R2 and apply
Note 1488135 - Database compression for SQL Server
this will save additional space (30 - 50 %).
Markus

Unicode language disappeared after a hard reset on...

recently i did a hard reset on my n8 belle. After a hard reset i can't able to see unicode language such as Bengali language anymore. Before hard reset i can see unicode language on my n8 default web browser. Now what can i do ? Plz help me
Nokia N8 Official Belle Refresh

The Symbian OS is from the ground up based on Unicode.
A particular phone might not have Unicode fonts with all languages as part of the firmware, but they might be installed afterwards.
A hard reset might (and probably does) remove fonts from phone memory that are not in ROM (read-only memory).
A firmware update might restore them, if the fonts are part of the firmware update.
Otherwise, a firmware update might also cause languages to be lost, if the firmware has been updated to a different language variant after the phone left the factory:
/t5/Software-Updates/Language-changed-or-missing-after-software-update-sticky/td-p/265903

I have a macbook with Iphoto 8.1.2. How do I get it to stop importing duplicates even after I checkbox tell it not to.

I have a macbook with Iphoto 8.1.2. How do I get it to stop importing duplicates even after I checkbox tell it not to.

How do I get it to stop importing duplicates even after I checkbox tell it not to.
That checkmark will only prevent iPhoto from importing exact duplicates - the exact filename, image format, exactly the same size,
What kind of duplicates are you asking about? Have the files been renamed or converted in any way?

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

4 possible causes of that message:
1] Activation server is actually down. Very rare occurrence, but it does happen.
When it does occur, down time is very short. Solution - try again.
2] Your firewall or antivirus are blocking the connection. Solution - temporarily
deactivate your firewall or antivirus until the update completes.
3] Computer being used for the activation has previously been used to jailbreak
an iOS device. Solution - use a computer that has not been used to jailbreak an
iOs device.
4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
may have made changes that will prevent the iPhone from successfully activating.
Terms of Use for this forum prohibit discussion of jailbroken iPhones.

Issue in .class file in imported archive ESR - after upload using eclipse

Dear Friends,
My requirement here is too change existing java mapping. Here I am exporting zip file from imported archive and after making changes in eclipse upload the .JAR file again. Here .class file is not opening after upload in Imported Archive.
Error is
Setup I am having on my system.
-> JDK version on my system JDK 1.6_34
-> JRE on my system – JRE 6
-> Using eclipse SDK 4.2.2
SAP PI servers settings.
I searched online blogs but no help. Can anybody guide me what wrong am I doing here?
Thanks.
Sumeet.

Thanks for reply..Hareesh.
-> In Eclipse only 1 warning is coming and no error. I guess Eclipse automatically compile .class file. Is there any way in eclipse to see if compilation is done properly?
-> I imported few external JAR files and already few JAR files are there in Eclipse(JRE1.6), as shown in fig below. Which JAR file is being user? How can I make sure?
-> When using Run as option I am not getting any option. Is it normal or did I have to activate some option?
Please give your views on this.
Thanks.
Sumeet.

Database history growth not updating after EHP upgrade

Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MK

Hi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav

Import 50fps in After Effects cs6

Hi all! I have some AVCHD files shooted at 50fps and I want to use it to do somw slow-mo effects. The problem is when I import this footages in AE in the interpret footage settings AE read the files as normal 25fps files...so I cheked in Windows and I think the problem might be there cuz Windows in the info panel of the files say: 25fps. I'm sure the files are 50fps cuz I shooted by myselfe...where can be the problem? ty
UPDATE: The problem seems only with interlaced record modes...in progressive modes windows recognize the 50fps...but why with interlaced no?

Our Panasonic AF101 states that it can record at 50fps (which it can), but the problem is, that it cannot output at 50fps. It encapsulates 50 discreet frames imbedded as a field in a 1080/50i data stream.
Try this suggestion:
1) Shoot at 1080/25P
2) Use Variable Frame Rate of 50FPS
3) Capture directly to Samurai device
4) Import file into after effects and interpret as 25FPS seperate fileds - Upper field first
5) Create new composition from footage - then double the frame rate of the composition (leave footage as interpreted above)
6) Render this comp out to a TIFF sequence
7) Import TIFF sequence into new composition with a Frame Rate of 25FPS - this now plays back at half speed, smoothly as the above process give me 50 discreet frames.
and see if you get the 50 discreet frames. dont worry about the first few steps, that is just the devices I use, try taking it from step 4.
Hope it helps,
Pierre
I also see Dave's answer, and he is also right. The 50i would play back as 25 interlaced fields. What is the issue with the files that are you trying to slow down? what is not working properly?
Pierre

Bridge not importing files into After Effects

From AE I go to File > Browse in Bridge...
Bridge opens up and I find the file I want. If I double click the file, an AI for instance, it opens the file within Illustrator. I could find, double click it, and it opens in Photoshop.
I feel as though I'm missing how to import files into After Effects by using bridge.
I'm running CC 2014 on a Win 7 machine.

Probably an issue with whatever created the files in the first place. WMV doesn't have Alpha, but can have multiple streams... anyway, AE is crap at dealing with such stuff, so convert it using an external tool like Handbrake or whatever...
Mylenium

Hi there , i wanna ask how can i import my bookmark after format ? i've a back up in time meachin but where should i go to get mu old book mark ??

hi there , i wanna ask how can i import my bookmark after format ? i've a back up in time machine but where should i go to get my old book mark ??
plz help

See:
*https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Changing the language in After Effects cs5

Hello, I'm trying to change the language in After Effects cs5 from German to English on a mac (10.8.5 osx). I've tried going to package contents/resources/AMTlanguages and changing de_DE to en_US but when I restart it and enter the serial number it says its incorrect for this product. I was able to change photoshop without any trouble but does anyone know if AE has a language specific license? help please and thank you!

Any standalone retail package is language specific as dictated by the serial number and installer. Lucky for you, you can easily set AE to English by creating a file called ae_force_english.txt in your user profile's documents folder. the file doesn't need to contain anything, it just needs to be present and named properly.
Mylenium

Import language (SMLT) after EHP 03

Similar Messages

Maybe you are looking for