"Import Library"  not found in iTunes 8?

Hello, I finally made the PC-to-Mac switch this week. I'd like to bring my iTunes library over from the PC (and maintain ratings, play counts, etc.), and I've found various instructions on how to do so. However, the instructions call for exporting the library into an XML file (Library.xml) on the PC, then transferring it to the Mac and Importing it into iTunes on the Mac.
I cannot find the "Import Library" menu option in iTunes 8. Am I missing it? Is it hidden in another menu? Why would they allow you to export the library if you couldn't import it again?
Thanks in advance for any assistance!

CasperGemini wrote:
Looks like maybe not all of the support documentation has been fully updated...
Unfortunately, that happens all too often when new features are added to iTunes. Keeping iTunes help current seems to be less-than-low priority. iTunes Help is also due for an overhaul. When the help for Office:mac is better designed and more thorough in providing details, examples, etc., than the help for software designed by Apple, something is not right in the universe.

Similar Messages

  • "iTunes MobileDevice library not found"

    Hi,
    I get the following error message when trying to find a connected iOS device in the AIR for iOS Settings (Post publishing option):
    "iTunes MobileDevice library not found. Please check your iTunes installation."
    iTunes works fine, and I am able to see connected devices in that application. I am running Windows 8.1 64-bit, Flash Pro CC 13.1.0.266 and the latest iTunes.
    Any suggestions?
    Thanks.

    I've had this problem for since September 2013, but have not been able to get any useful information out of Adobe. They blame it on iTunes.
    See this thread for more:
    iTunes MobileDevice library not found error when 'Install application on the connected iOS....'
    It did use to work on my system. I have another colleague with exactly the same versions installed and it works for him.

  • HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

    I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open.  First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.

    Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. "  Then a second window says, " Error 2 ",  "The iTunes Application cannot run without the Apple Support ...."  What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck!    Thank you,  Bob Bryan

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • Library not Found: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit

    Hello all,
    I am working with a MacBook purchased in 2009, OSX 10.6.8, processor: 2.13 GHz Intel Core 2 Duo, Memory: 2 GB 800 MHz DDR2 SDRAM.
    I recently downloaded and tried to install a game I had previously successfully installed from Gamehouse.com. The download goes fine, when I open the .dmg file the correct window pops up with an icon to double-click to start installation. At that point I receive an error message (see below). I contacted Gamehouse and ran through a number of solutions they gave me, including uninstalling and removing all traces of this or any other game from my computer (including .plist files), installing any available updates (iTunes finally got that update I've been postponing for months...), and dragging the installer icon into various different locations before opening. All to no avail.
    It appears to me the issue is this line in the error message: "Library not Found: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit"
    I checked the Frameworks folder and there is nothing there called StoreKit.framework, so that seems to make sense. It isn't anywhere else in the computer either. After a quick google I found this problem pops up now and then - there is one other question on the same issue in this forum, but I have no idea if the solution given there works, as the original poster never came back. Their suggestion was to try reinstalling Just OSX from the boot disc. I haven't attempted this yet - I thought I'd see if I can get any input before going that route.
    Thank you for any advice. Here is the full error report:
    Process:         Delicious - Emily's Wonder Wedding [349]
    Path:            /Applications/Delicious - Emily's Wonder Wedding Premium Edition.app/Contents/MacOS/Delicious - Emily's Wonder Wedding
    Identifier:      com.mrgoodlivng.delicious8.mac
    Version:         ??? (???)
    Code Type:       X86 (Native)
    Parent Process:  launchd [91]
    Date/Time:       2014-08-10 14:33:56.929 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          201860 sec
    Crashes Since Last Report:           18
    Per-App Crashes Since Last Report:   21
    Anonymous UUID:                      750B56F7-4793-44CA-847D-5A35F9F8DABC
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/StoreKit.framework/Versions/A/StoreKit
      Referenced from: /Applications/Delicious - Emily's Wonder Wedding Premium Edition.app/Contents/MacOS/Delicious - Emily's Wonder Wedding
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <749D24EE-54BD-D74B-D305-C13F5E6C95D8> /usr/lib/dyld
    Model: MacBook5,2, BootROM MB52.0088.B06, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.38f5
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHZ2160BH FFS G1, 149.05 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS22N
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0229, 0x04600000 / 3
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2

    That file is a OS X system file, you'll have to overwrite OS X with a new copy to restore it.
    First things first
    Emergency backup procedure
    Drag and drop copy your users file folders (music, pictures, documents etc) to a regular external powered drive as soon as possible.
    Do not use, setup or trust only TimeMachine at this troubled time as it will copy corrupted data and we need just your users files safe just in case. TimeMachine cannot be used with a Windows PC.
    Unmount and Disconnect all external drives once the backup process is completed.
    Note:
    If you have any over 4GB sized files, those won't copy to a standard formatted FAT32/MSDOS drive from the factory, if you need to save these 4GB+ files use another blank/empty drive and use Disk Utility to format it 1 Partition, Option: GUID,  Format: OS X Extended Journaled (or the standard default one for older Mac's).
    Mac's cannot copy to nor format a NTFS  drive. ExFAT format to be used with a Windows machine must be right click formatted by Windows, not OS X (does it wrong) XP machines can install a free exFAT update from Microsoft. Vista-Win 8 can format exFAT.
    Formatting a drive will erase all data on it.
    Once your files are safely copied off the machine, next run through this list of fixes, I suspect #8 Reinstall Just OS X + Software Updating fully should restore the broken/missing file.
    ..Step by Step to fix your Mac
    Overwriting OS X with a new copy does not delete most programs or users files, but you backup your users files regardless as it might be something more than we currently know at this time.

  • Compilation Error for import classes not found in generated Proxy Class

    Hi,
    We are generating java classes for the COM dll using JCOM com2java compiler.
    We are getting a compilation error for import class not found when compiling the
    generated Proxy java source code. It can't find the com.bea.jcom.Dispatch class that
    the generated Proxy java source code extends. It also can't find com.bea.jcom.Variant
    or com.bea.jcom.Param. These are interfaces or data types or classes used by COM
    library.
    I added weblogic.jar to my class path and the only Dispatch class i found inside
    the weblogic.jar is com.linar.jintegra.Dispatch;
    We have com objects for which we want to develop an EJB client to interface with
    the COM object using JCOM with Native Mode disabled.
    Any help on the compilation error..I tried changing the extends for Dispatch to com.linar.jintegra.Dispatch
    but the other errors are still there.
    To begin with, I think the generated code should not refer to any of the COM data
    types.
    Any help please.
    Thank you in advance,
    Regards,
    Rahul Srivastava
    [email protected]

    Hi,
    I resolved the other errors by changing all references from com.bea.jcom.Variant
    etc to com.linar.jintegra.class name..all were present under the com.linar.jintegra
    package.
    Thank you all anyways,
    Regards,
    rahul
    "Rahul Srivastava" <[email protected]> wrote:
    >
    Hi,
    We are generating java classes for the COM dll using JCOM com2java compiler.
    We are getting a compilation error for import class not found when compiling
    the
    generated Proxy java source code. It can't find the com.bea.jcom.Dispatch
    class that
    the generated Proxy java source code extends. It also can't find com.bea.jcom.Variant
    or com.bea.jcom.Param. These are interfaces or data types or classes used
    by COM
    library.
    I added weblogic.jar to my class path and the only Dispatch class i found
    inside
    the weblogic.jar is com.linar.jintegra.Dispatch;
    We have com objects for which we want to develop an EJB client to interface
    with
    the COM object using JCOM with Native Mode disabled.
    Any help on the compilation error..I tried changing the extends for Dispatch
    to com.linar.jintegra.Dispatch
    but the other errors are still there.
    To begin with, I think the generated code should not refer to any of the
    COM data
    types.
    Any help please.
    Thank you in advance,
    Regards,
    Rahul Srivastava
    [email protected]

  • Photo Library Not Found

    I was trying to free up some space on my internal HD yesterday; I did trash what I thought were just contents from the iPhoto library. Today I get a message "Photo Library Not Found" when I attempt to open iPhoto.
    In reading past posts here, there is a reference to "standard recovery procedure."
    Can someone tell me what that is or what thread I might look at that will tell me the best way to proceed here?
    I sure hate to think I've lost all my photos.
    Thanks
    Lee

    Lee
    You will get Time Machine with 10.5, but you can also purchase excellent back up apps like Chronosync, DejaVu without using 10.5. Also, if you purchase another external HD you can run your iPhoto (and your iTunes) from there, so freeing up space on your internal.
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • GNU fortran90 doesn't work now.  I get the error message:gfortran: warning: couldn't understand kern.osversion '14.0.0 ld: library not found for -lcrt1.o collect2: error: ld returned 1 exit status

    GNU fortran 90 no longer works.
    I get the error message:
    gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
    ld: library not found for -lcrt1.o
    collect2: error: ld returned 1 exit status

    GNU fortran 90 no longer works.
    I get the error message:
    gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
    ld: library not found for -lcrt1.o
    collect2: error: ld returned 1 exit status

  • New IPhone 4 charger charges when plugged into computer but not found in ITunes

    I recently bought a Reiko Iphone 4 charger and when I plugged it into my computer it charges the phone but is not found on itunes or IPhoto..how can I fix this?

    Hey tke6191!
    Here is an article that will help you troubleshoot this issue with iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Transport library not found: dt_socket

    I'm a JBoss newbie trying to use to start jboss 4.0.3 on Fedora Core 4 with java 1.5.0_05 in debug mode. Following the instructions found here: http://java.sys-con.com/read/44918.htm, I modified the the jboss startup script run.sh by adding the line
    JAVA_OPTS="$JAVA_OPTS -Xdebug -Xrunjdwp:server=y,transport=dt_socket;address=4142,suspend=n"right before the exisitng line
    JAVA_OPTS="$JAVA_OPTS -Dprogram.name=$PROGNAME"I get the following error from the jboss console
    =========================================================================
      JBoss Bootstrap Environment
      JBOSS_HOME: /usr/lib/jboss-4.0.3SP1
      JAVA: /usr/lib/jvm/java-1.5.0-sun/bin/java
      JAVA_OPTS: -server -Xms128m -Xmx128m -Xdebug -Xrunjdwp:server=y,transport=dt_socket;address=4142,suspend=n -Dprogram.name=run-debug.sh
      CLASSPATH: /usr/lib/jboss-4.0.3SP1/bin/run.jar:/usr/lib/jvm/java-1.5.0-sun/lib/tools.jar
    =========================================================================
    ERROR: transport library not found: dt_socket;address=4142 ["transport.c",L138]
    ERROR: JDWP Transport dt_socket;address=4142 failed to initialize, TRANSPORT_LOAD(509) ["debugInit.c",L500]
    JDWP exit error JVMTI_ERROR_INTERNAL(113): No transports initializedFATAL ERROR in native method: JDWP No transports initialized, jvmtiError=JVMTI_ERROR_INTERNAL(113)I have tested that the debugger works on it's own by trying to debug a hello world app:
    java -Djava.compiler=NONE -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,address=8000 hello and then attaching to it with jdb -attach localhost:8000.
    Is this classpath issue?

    It looks like you have a semicolon between the name of the transport library and the address option - that should fix it :-)

  • Call Library Function Node 'Wrapper.C​reate': Library not found or failed to load. using windows 7 64 bits

    Dear all
    I try to interface my spectrometer (NIRquest from ocean optics) using labview on my 64 bits cumputer using windows 7.
    I have absolutely no problem to run the spectrometer with the program dedicated to the spectrometer (called Spetrasuite).
    I've installed "OmniDriverSPAM-1.66-win64-development-installer.e​xe" and everything went right.
    When I select a VI in LabView (e.g."wrapper_create.vi") from the wrapper.llb, LabView returns an error :
    "Call Library Function Node 'Wrapper.Create': Library not found or failed to load."
    I chek the call library function, but everyting seems to be right :
    I use LabView 8.6.1 and my others *.vi are running perfectly...
    Do you have any idea from where does the problem comes ?
    Thank you very much

    Hello Flanguy,
    In addition to smercurio_fc's feedback I can confirm that LabVIEW 8.6.1 doesn't exist in 64-bit version.
    Officially, LabVIEW 8.6.1 doesn't support Windows 7 either.
    The minimal version of LabVIEW you would need to both support Windows 7 and exist in 64-bit version is LabVIEW 2009 64-bit or any 64-bit versions which are more recent.
    In the two links (1 & 2) you can find more background information.
    Kind Regards,
    Wouter
    National Instruments Belgium

  • Call Library Function Node: library not found or failed to load

    Hello,
    I had a VI that could not find some of the dll functions it needed.  It works on one machine and not on another.  So foolishly I copied the dll in question from the working machine and pasted it over the one on the non-working machine. 
    Now all my math functions are broken on the machine I copied the dll too.  The error is "Call Library Function Node: library not found or failed to load"
    And if I try to relink in the VI I get "Error loading C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll" A dynamic link library (DLL) initialization routine failed."
    I tried a repair labview and that did not help.
    I tried uninstall and reinstall labview and that did not help!
    Please help me fix this!
    Version 8.2
    dll: C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll
    Jim

    What library did you first copy?
    Also lvanlys.dll depends on the Intel Math Kernel Library that gets installed in a different location "C:\Program Files\National Instruments\Shared\MKL".
    This Intel Math Kernel Library again depends on the Visual C runtime libraries. Most likely you replaced one of those runtime libraries somehow and now the Math Kernel Library (MKL) fails to initialize which causes thelvanlys.dll to fail its load.
    Without a good view on your system and what other NI software you have installed it is very hard to recommend a good way of proceeding. There are various versions of the MKL used by various versions of NI products and just deleting the entire MKL folder might get you into trouble with other NI tools.
    Deinstalling everything from NI, deleting the entire National Instruments folder and then reinstalling what you need would be the most safe proceeding.
    And next time don't just copy some Visual C runtime libraries between machines. Their dependencies are complicated at the least and simply not graspable by us mere mortals. Use the according C runtime installer for the version you need as that installer will take care of installing the right versions of C runtime components and registering everything proberly so you do not usually run into problems with other applications using different versions of the C runtime.
    Message Edited by rolfk on 03-01-2010 10:26 AM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Iphone not found in itunes

    Help.  My Iphone 4s and mini are not found in Itunes on my new HP ENVY dv6-7246us Notebook PC that is running windows 8.  I have tried all four of the usb slots; eventually the mini was discovered however after a reinstall of Itunes, neither are found. 

    Phone not recognised in itunes
    iPhone not recognised by iTunes on PC
    iPhone not recognised by iTunes on Mac

  • IPhoto Library Not Found after Upgrade to Leopard

    I was running the newest iPhoto under Tiger and I just upgraded to Leopard. I tried to open iPhoto and a message said, "iPhoto library not found." It was there before I upgraded from Tiger. I mostly use Adobe Bridge so I didn't have much in iPhoto but I'm curious to see why the library disappeared and whether it can be restored. I looked all around on the hard disk and didn't see the iPhoto library anywhere. Thanks.

    Yes, it must have been upgrade and install because I followed the defaults. The iPhoto library was in the Pictures folder in Tiger and I never moved it. After the upgrade to Leopard, it was gone--it is no longer in my Pictures folder, nor does it seem to be anywhere else. I didn't touch it--the upgrade made it disappear. Why did that happen? What can be done about it? Thanks very much.

  • Fobs4JMF, Native shared library NOT found, Mac OS 10.5

    Hello all,
    We are having trouble getting Fobs4JMF working on a MAC; we are receiving the following error:
    Fobs4JMF - Native shared library NOT found
    java.lang.UnsatisfiedLinkError: /Users/susan/Documents/workspace/GemIdent/libfobs4jmf.jnilib:
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1822)
        at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1739)
        at java.lang.Runtime.loadLibrary0(Runtime.java:823)
        at java.lang.System.loadLibrary(System.java:1030)
        at com.moesol.bindings.NativeLibraryFinder.loadLibrary(NativeLibraryFinder.java:63)
        at com.omnividea.media.parser.video.Parser.<clinit>(Parser.java:107)The source code we are using works fine on a windows machine using the native .dll file.
    The following files were copied from the binary download into our project folder:
    a) libfobs4jmf.jnilib
    b) jmf.jar
    c) fobs4jmf.jar
    d) jmf.propertiesThe jmf and fobs4jmf jars are added to the classpath
    We have tried the following to no avail:
    a) adding the "libfobs4jmf.jnilib" file to a /lib directory in the project space
    b) adding the "libfobs4jmf.jnilib" to "Contents/Resources/Java"
    We thought it may have been a 64bit issue, so we copies the jmstudio executable to our project workspace, executed it and we are able to play video files without any problems. Therefore, it's a problem with our setup.
    Our versions are listed below:
    Eclipse 3.3.1
    JRE 1.6.0
    Mac OS 10.5, 64bit (although it was also tried on OS 10 32bit to no avail)
    Fobs4JMF 0.4.1
    JMF 2.1.1e
    Thanks so much for your support,
    Adam Kapelner
    Lead Engineer, gemident
    Stanford University
    Susan Holmes
    Stanford University

    Hi Captfoss,
    Thanks for your help.
    We've figured it out. Fobs4JMF 0.4.1 is compiled in Java 5 for 32bit. Once we compiled in Java 5, it began to work. Repeat: do not use Fobs4JMF on a 64bit mac running Java 6, it will require a 64bit native library. The provided jnilib is in 32bit!
    Here was out directory structure:
    /gemident.jar
    /jmf.properties
    /libfobs4jmf.jnilib
    /lib/jmf.jar
    /lib/fobs4jmf.jarAnd our manifest.mf:
    Manifest-Version: 1.0
    Main-Class: GemIdentOperations.Run
    Class-Path: lib/jmf.jar lib lib/fobs4jmf.jarWe can execute with the following:
    java -Xmx1400m -jar gemident.jarThere is no need for any "Djava.library.path" or "LD_LIBRARY_PATH" - it should just work
    Adam

Maybe you are looking for