Import Manager - Problem with 0..n field in Import Manager

Iu2019m having problems with XMLs that contain multiple or single tags in MDIS process. For example: I did the map using a XML with multiple tags for Address:
<address>
<item>
u2026
</item>
<item>
u2026
</item>
</address>
When I send two address or more Address, the Import Server work fine, but when I send only one Address, the address is not imported.
<address>
<item>
</item>
<item>
</item>
</address>
Opening the xml file with only one Address in Import Manager, I saw that the fields isnu2019t mapped, but when I open a xml file with multiple Address itu2019s open correctly.
The XSD cardinality for the Address\Item is 0..n

Hi Evandro ,
If it is processing the input file correctly through the Manul Import manager process then update your latest Map by using SAVE As option or else save this correct map with a new name altogether and use this new map in the port for automatic importing.
If your file is able to process correctly through the Import manager without showing any errors till the Import step in the Import manager then this map must be correct and shoul automate the importing correctly.
Provided you are using the similar file for automatic importing as well.The file name and the fields as well as the value mapping as saved in this corrected map must not differ with the input file else this saved map will not be able to import correctly.
Check to see if you have made correct setting for automatic importing by refering the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e(mdm import and syndication server)
Also check the exception folders if your import is not taking place automatically:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Exceptions- MDM Import Manager MDIS-Exception handling)
Hope It Helped
Thanks & Regards
Simona Pinto

Similar Messages

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Hi Folks, I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.

Hi Folks,
I have a problem with OBIEE EM, There in Enterprise Manager i am unable to navigate into the options like when i clik on any Tab it is not working and even i am unable to create a report using analysis.
Thanks in advance

i have also tried that but no use can u give me any other way.......

Im having a problem with my ps elements 8,download manager active x has encountered a problem

im having a problem with my ps elements 8,download manager active x has encountered a problem
adobe reader and acro manager has encountered a problem and needs to closed
-+++reg.exe has encounter a problem
-invidia graphics driver has stopped working properly.

Check out this link if any of the information in there can help you move forward:
http://kb2.adobe.com/cps/400/kb400530.html
Regards,
Ankush

Adobe Extension Manager loops with the following message: "The Extension Manager will now launch and

Hi, whenever I open Dreamweaver CS5 I get this message:
Adobe Extension Manager loops with the following message:
“The Extension Manager will now launch and finish updating Dreamweaver”.
Then the manager starts and I have to wait and click a few buttons until I can close it.
How can I stop the Extension Manager popping up?
Thanks for advice.

Seems to be a lot of this going on. Wondering if we're wasting our time with this??!!

Problem Importing XML Issue with FLAT MultiValued Field.

I'm importing parts to my repository with a number of fields. This import is used to both UPDATE existing parts as well as add new parts to the catalogs. We want the fields in the import to be updated. There is one flat MultiValued Field that we need to hold just the value that we're adding in the XML. This should overwrite the others. I have tried many different configurations. I want to know how to make this change happen without overwriting fields that are no contained in the XML.

Hi,
Map the multivalued field with the source field, then right click on the maultivalued field at destination side, right click on it and set Multi-Valued Update = Replace . By default this property is set to Append which simply append the values from the source field.
Kindly update us...
Regards,
Jitesh Talreja

Contract - problem with attachements (empty field in LOIO_OBJID)

Hi Guys,
We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
LOIO_CLASS: Normally filled with BBP_L_DOC
LOIO_OBJID: Normaly filled with a GUID size datastring
Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
Can anyone give us advice about two things.
1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
2) Does anyone know why this problem occurs and how to fix it for new contracts?
Hope to hear from you,
Arie

Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
W_ENQUIRY_ITEM_INX-ITM_NUMBER = THEAD-ITEMNO.
      W_ENQUIRY_ITEM_INX-UPDATEFLAG = 'X'.
      W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
APPEND W_ENQUIRY_ITEM_INX.
CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
   EXPORTING
   SALESDOCUMENTIN               =
     INQUIRY_HEADER_IN             = W_ENQUIRY_THEAD
IMPORTING
    SALESDOCUMENT                 = W_NUMBER
   TABLES
    RETURN                        = W_RETURN
    INQUIRY_ITEMS_IN              = W_ENQUIRY_ITEM
    INQUIRY_ITEMS_INX             = W_ENQUIRY_ITEM_INX
     INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

Problems with the 'Comments' field in iTunes

First, sorry for my english (I'm danish).
I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
But the problem is with the 'Comments' field:
Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
And there's also a different story:
A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
THANKS!
Doug

Is anyone else having problems with Apertures Date fields?

After experiencing a sysems failure I began restoring my images from backups. I have had no end of problems with Image dates. I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
Here is a clip from my image metadata using exiftool:
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
File Access Date/Time           : 2013:01:16 11:34:38-05:00
File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
Modify Date                          : 2006:02:20 11:51:12.10
And here is what Aperture utilized on import
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
According to the Aperture mapping table, this shouldn't be happening.
Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about slightly over 30,000 images. Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image. That approach isn't acceptable.

Hmm ok, let me restate the issue then, I thought I was clear. I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
Create Date                          : 2006:02:20 11:51:12.10
Date/Time Original              : 2006:02:20 16:51:12.10
(The delta of 5 hours is the result of Zulu versus local time offset)
But, when I ingested it into Aperture, the import routine utilized the IPTC field
File Modification Date/Time     : 2012:09:23 19:53:15-04:00
which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.). This resulted in the image date fields being stamped in Aperture as:
Date:                               9/23/12 7:53:15 PM EDT
Date Created                         9/23/2012 7:53:15 PM
Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Inventory management problem with WS-C2950-24 on CWLMS 4.0

Hi Joe,
I have a problem with inventory management wiht 2950- 24 switches on which I am not able to capture inventory as well as the configurations. The IOS version is 121-22.EA13 and featureset is i6k2l2q4-mz. However, when I troubleshoot it, all the transport protocols (Telnet, ssh, tftp etc) shows success.
Thanks,
Best Regards // Rajiv

Inventory uses snmp to communicate to device. Please check you device has snmp configured and LMS has correct SNMP RO credentials added to it.
Please try to do a manual snmpwalk from LMS server (using device centre > tools) and see the walk succeeds.
Then again try to run the inventory from LMS server on this perticular device and if it fails, share the failure result/screenshot etc details. NMSROOT/log/ic_server.log as well.
-Thanks

Import Manager - Problem with 0..n field in Import Manager

Similar Messages

Maybe you are looking for