Import matching RAW does not include all photos

Hello to you all,
When I want to import matching RAW files, Aperture only recognizes a couple of photos inside the projects. I'm using the 'include current filter' as I have made a selection of pictures inside the project based on a rating. But even when I disregard this filter Aperture only sees about half of the RAW files belonging to the JPG files.
The 'date & time' settings are ok and I have not renamed files during import. All JPG files are imported in the same project and I'm importing from the correct SD-card. There are about 300 photo's in the project and I have selected about 80 of them for the matching RAW import function.
Am I missing something here or does this appear to be an Aperture bug?

LR shows only those images that are in the catalog.
If you want to see exported images in LR you have to tell LR to add them to the catalog.
You do this by checking the box "Add to this catalog" in the Export dialog.
WW

Similar Messages

Photo App does not display all photos

Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

Iphoto 11/Part of Ilife does not display all photos in "photos" or "events"

I am running latest version of everything, just loaded ILife. Iphoto 11 does not show "ALL" photos when I use "photo" or "event" view. It shows some....when I cycle down through the Blank images in these views, it will often show the pictures as I mouse click down.....but as soon as I take my finger off the mouse, everything (well, almost everything) reverts to blanks.
There is nothing selected to be hidden.
I have "Faces" set up and now when i look through an individual "Face" file, there will be intermittent Blanks.
Very screwy, anybody Help????

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

IMac does not recognize all photos in iPad photostream

My new imac does not recognize all the pictures in my ipad photostream. I have over 800 pix in my ipad photostream and imac will only recognize 300 when i have it plugged in to import. Any ideas?

Nevermind, I just spoke with my wife who imported the pictures last night just from that event. She did not delete them after importing either. I guess next time this happens I will uncheck the box that says "Do not import duplicates" to troubleshoot.

VerboseToZip failed, and does not include all required file.

Hi,
I've been trying to use verboseToZip to produce smaller weblogic.jar file. This is because the application is going to be distributable via JWS.
I followed the step as provided in weblogic webpage. But I got some error message.
1. "Unable to find class file named 'com.sun.corba.se.impl.orbutil.GetPropertyAction'."
I then found out that this class is located in
C:\Program Files\Java\jre1.5.0_06\lib\rt.jar
So I included this JAR file in my classpath, and run verboseToZip again. Seems passing that error message now, but I got another one:
2. "Unable to find class file named 'sun.reflect.GeneratedSerializationConstructorAccessor25'."
This occurs with every "sun.reflect.GeneratedSerializationConstructorAccessorXX"
So I edited the classList file, and remove all occurence of "GeneratedSerializationConstructorAccessor"
By the way, the line in the classList file is:
[Loaded sun.reflect.GeneratedSerializationConstructorAccessor25 from __JVM_DefineClass__]
I then ran verboseToZip again, and got another error:
3. "Unable to find class file named 'sun.reflect.GeneratedMethodAccessor9'."
Same as before, I removed all occurrence of that line.
[Loaded sun.reflect.GeneratedMethodAccessor9 from __JVM_DefineClass__]
Ran verboseToZip again.. yet another error
4. "Unable to find class file named 'java.awt.$Proxy0'."
Did the same thing, ran verboseToZip again...and another error!!!! (this is an awful process for just producing the slim down version of weblogic.jar)
5. "Unable to find class file named 'sun.reflect.GeneratedConstructorAccessor4'."
Again, same thing.. removed it, and run verboseToZip again. Finally... it ran without error. BUT.....
the generated file does not contain all the class I need..
for example, it does not have "weblogic.jndi.WLInitialContextFactory". Hence, all of this awful process is really a waste.
Has anyone ever experienced this before? I mean, it should be a straightforward process without the need to remove all those lines, right?
Thanks a lot for the helps!
Regards,
Alex Wibowo

Looks like the rest of your post went for a walk.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Workshop IDE Build does not include all files

We have property files also which we want included as part of the build process
but if we use the IDE build it does not include them. We have to therefore export
the IDE build and customize it to include *.properties like this
<zip basedir="${dest.path}" zipfile="${ejb.outputJar}" encoding="UTF8"> 
<zipfileset dir="${project.local.directory}" includes="*.properties" />
</zip>
which causes a problem for us because the exported build file is specific to a
user's local PC and cannot be used in a team environment.
How can we have the IDE build include all the files within a project i.e. include
properties files also.
Thanks
Mindy

Hi Mindy,
Why not in EJB?
Yes there is no argument as to why property files cannot be copied over from EJB
project.
The reason is that Workshop has not implemented the feature with EJBProject. We
have that feature only for Java projects and not for EJB project.
Thanks a lot,
Vimala
"Mindy" <[email protected]> wrote:
>
You are saying the same thing again. My question is why not for EJB projects?
I know we can create the files in Java project and read them with specific
java
files to read them but WHY NOT IN EJB IS THE QUESTION?
"Carl" <[email protected]> wrote:
Feature of the EJB Project:)
"Mindy" <[email protected]> wrote in message
news:4034c351$[email protected]..
We have these property files in the EJB project, not Java project.Why
should they
not be copied if they are part of the EJB project?
"Carl" <[email protected]> wrote:
The properties file do get copied over if they are part of Java project.
Hence, we have created utility classes in Java project that read
the
property file.
For other project types, like EJB the property files didn't get copied...
"Mindy" <[email protected]> wrote in message
news:4033b944$[email protected]..
We have property files also which we want included as part of the
build
process
but if we use the IDE build it does not include them. We have to
therefore
export
the IDE build and customize it to include *.properties like this
<zip basedir="${dest.path}" zipfile="${ejb.outputJar}" encoding="UTF8">
<zipfileset dir="${project.local.directory}"includes="*.properties" />
</zip>
which causes a problem for us because the exported build file is
specific
to a
user's local PC and cannot be used in a team environment.
How can we have the IDE build include all the files within a projecti.e.
include
properties files also.
Thanks
Mindy

Index Preview Panel does not include all my index entries

I've put all my chapters in a book and created an Index. All is well until I try to edit the Index. InDesigns materials tell me to go to my Index Preview Panel to make edits, which works fine. But the Panel does not contain all my index entries. I've tried updating the previews and regenerating the Index numerous times, but I still cannot get an up-to-date preview panel. Any ideas???

Organize Bookmarks was renamed to '''Show All Bookmarks''' in Firefox 4+ versions.

Matching RAW does not work.

I've recently "upgraded" to Aperture, from just basic folders.
I imported some 400 pictures the other day, but only the jpeg versions. Now, two weeks later I wanna match the RAW files. So I have the raw files available. Press import. Then I mark the project where the jpegs I want to match are and in the import file system I find the folder that contains the raws. SO far so good. All the pictures are viewable in the import interface, but the right column "Raw+Jpeg pairs" is set to "both". So I change that to "Matching RAW files" and poof, no images in the selection. I've tried renaming, I've tried with about 1000 different pictures or more. Aperture will simply not recognize the raws.
It has worked one time, the same day I imported the other. I then also matched jpegs with raws, using the same procedure, same camera so on so on. What is going wrong?

The latest download I could find is Digital Camera RAW Compatibility Update 5.04. Others are linked from this Apple - Support - Search. Or consider OS X Mavericks: Reinstall OS X to get all the latest software in one step.
(If you haven't already done so, set your OS X Mavericks: App Store preferences to automatically check for updates so your Mac will advise you when future Apple updates like these become available.)

"Library" view does not show ALL photos

My "Library" view is not showing me the last 2 rolls I imported. If I click on the specific year views, I can see the photos, but I expect all photos are displayed in the "Library" view.
While still running iPhoto 5, I imported a roll of images from disk that included photos taken at the end of Dec 2005 and in Jan 2006. These are the photos that do not show in the "Library" view. This was happening with iPhoto 5 and is still happening with iPhoto 6.
Any suggestions for getting all photos to shwo in the "Library" view ?
Thanks,
Eliot

Thanks -- I figured out my problem...
Since iPhoto now seems to group items into "rolls", I had imported images from several different dates. The first image was from Sep'05, so it placed ALL the images imported, even those from Jan'06, with the Sep'05 photo in the middle of of my "Library" view.
Is there a way to have the "Library" view sort in date order instead of by imported roll ?
Thanks,
Eliot

"all photos" album not including all photos. Causing some photo not to be uploaded to iCloud Photo Library

After updating to iCloud photo library (iPhone 5, iOS 8.1), if I look at my "photos" tab I see over 700 photos, but in the 'all photos' album I only have 420. This results in only 420 of the photos uploaded to iCloud Photo library and not clearing much space off of my iPhone.

The FAVOURITES and PANOS albums also sort by date and time too. So all the albums sort by time and day except the ALL PHOTOS album! Seems very strange! What's even odder is that the date range listed at the top of the ALL PHOTOS album would suggest that they are sorted by date!
Apple I hope you SORT this out soon

ICloud photo stream does not show all photos

I have 1000 photos is my photo stream, however on my Apple TV I just setup, I can only get 322 to show up in the iCloud Photo Stream. I've tried restoring and setting it up again, but I have the exact same numbers of photos.
Is there a reason I can only see 322 out of 1000 photos in my photo stream on the Apple TV?

I noticed the Apple TV was not displaying my photo stream after the update to 6.0. Here is what I did to get it to start displaying my photo stream again.
On your Apple TV go to Settings>iCloud
Click on iCloud Photo Settings
Turn off both the My Photo Stream and Photo Sharing options then turn them back on again
Select Photo Stream from the Settings menu and navigate to select the photo stream you want to use
Preview the slide show
I have about 400 images in the photo stream that I use to display on Apple TV and during the preview it took about two minutes before the images displayed.
Then I tested it in a normal setting where I have slide show starting after two minutes. The TV went to screensaver mode after two minutes and was black for about two minutes before the images appeared. Before the update the images would display shortly after the screensaver kicked on.
I hope this helps!

Aperture does not recognize all photos on sd card

I have a weird issue with Aperture. When I took the SD card out of my Nikon D3100 and put it in my MacBook Pro it only recognized the pictures I took a couple weeks ago. I took a series of photos and video last night and my childs christmas program and they will not show up in Aperture. The weird thing is that iPhoto will see them fine. I tried manually copying the pictures to a folder on my computer then tried to import from that folder but they still will not appear then either. As far as I can tell the pictures are not corrupted and I can open them in iPhoto, Preview and even Image Capture sees them. When I get info all the meta data appears. I did not shoot them RAW either which I have had no problem in the past importing anyway. These where all taken with the normal jpeg option at the full 14.2mp.
I made sure my Aperture is fully updated too. Any suggestions on how to get Aperture to recognize these pictures?

Nevermind, I just spoke with my wife who imported the pictures last night just from that event. She did not delete them after importing either. I guess next time this happens I will uncheck the box that says "Do not import duplicates" to troubleshoot.

Photomerge not including all photos - confused!

Hi,
I am using Photoshop CS5 12.0.3 to stitch together some panoramic photos using Photomerge but am encountering the following problem and would appreciate any advice.
I have 3 photos of a panoramic scene taken by the same camera with the same lens, focal length, ISO, shutter speed and aperture. The overlap between photo 1 and 2 is at least a third. The overlap between photo 2 and 3 is more like 50%. When I run photomerge (using the auto setting) the output image appears to only have photos 2 and 3 visible and merged nicely together. When I have a look at the layers photo 1 seems to be present but the output image doesn't include it. As an experiment I tried merging just photos 1 and 2 but that resulted in an image that just looked like photo 2.
This is confusing me - I have merged various other panoramic scenes with 2 to 5 photos taken on the same day with the same camera and set up with no problem at all so I think that rules out a lot of problems. I've tried this particular panorama from within Lightroom (edit in > merge to panorama...) and in Photoshop independently, both after working on other images and fresh after a reboot.
Can any of you shed some light on this please? It is driving me crazy. I am more than happy to provide the images if that helps (each is a 25MB Canon RAW file).
I hope you can help. Thanks in advance!
A

Have you tried other settings besides auto?
Also there is an optional plugin for cs5 that allows for manual alignment
of the photos during photomerge called photomerge ui, which places
an entry at the bottom of the photomerge dialog called interactive layout.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4688
more info (this is for elements since the cs5 help doesn't appear to have
anything on the interactive layout)
http://help.adobe.com/en_US/photoshopelements/using/WS27101fef35e777f9-2794c94411fdcce7142 -7ffd.html
MTSTUNER

LR 3.3 Does not Export All Photos

I have just recently started working with 3.3, and so far this has happened every time.
I import some photos, all jpgs, usually about 35-100 photos at a time. I do my keywording etc., and then try to export all of the photos to a separate folder. However, only 10-12 photos export. LR says that it's working, and I can see the number of photos going up on the folder I sent it to, but then it just stops and says that it's done. If I go into the Finder on my Mac, I can see that all of the photos have exported, they're just not showing up in LR.
My workaround for this has been to close LR, then re-open it and Import. Then those photos show up and I can import them into the catalog.
I'm assuming this is a bug? Anyone else having this problem? I'm still able to work with this workaround I'm using, but it's really annoying and causes extra steps.

LR shows only those images that are in the catalog.
If you want to see exported images in LR you have to tell LR to add them to the catalog.
You do this by checking the box "Add to this catalog" in the Export dialog.
WW

Import matching RAW does not include all photos

Similar Messages

Maybe you are looking for