Import Miro when location is different

Dear All
I have a situation as below
Some material has been received from the import vendor. The material is presently on the port. We have hired some space on the port itself which we could consider as our external warehouse wherein the material would be loaded. Now as n when this material is required we will pay them the custom charges & get that material released. How can we cater such situation in our sap wherein we can have the stock status of that external warehouse.
Regards
Surender Bhomia

Dear Ravi
Thanks for the solution but when I create a separate Storage Location Accounting entries will be generated but the actual effect that I have to provide in my Books is that of the material Tfd from warehose to individual BA besides that Excise implications & other cost is also required to be booked. Secondly when I create a Storage location It will not solve the basic problem which is I have to keep only that stock which is being received from warehouse & based on that MIRO will me done.
Regards
Surender Bhomia
9312147612

Similar Messages

Retrieving imported pictures, when location of pictures is lost.

I imported pictures to Adobe Lightroom and exported them to my memory card. Now my memory card is broke!
Is there any way to retrieve those pictures from Lightroom. Right now they are saying missing.

Cornelia-I wrote:
I consider it very dangerous to phrase "pictures are in Lightroom".
I agree. I've known more than one person who is not so literate computer-wise to import into Lightroom, then delete originals (thinking they are now in Lightroom).
Being the author of PreviewExporter, I've helped too many people recover Lr previews after having lost originals.
I hope Adobe will try to make this clearer up front, along with "why do my imported pictures look different in Lightroom than they did in my camera...".
Anyway, I guess we need to hear from the OP now to ascertain whether the originals are recoverable somehow... best not to resort to preview recovery unless absolutely necessary.
|> "...memory card is broke..." I assume this does not mean "it has no money"

Premiere Pro CC 2014.2 crashes when "locating media"

The problem;
Premiere Pro CC 2014.2 crashes when "locating media". I am working on a project that has not given me any problems for the last 200 hours. About a week ago I notice that the .proj file size was 276mb and found this odd because my largest project to date was never larger than 80mbs. I thought that the premiere was running slow because of the project size. As luck would have, when my client made their their final changes 2 days ago, I opened the project and premiere would hang on the locating media window and then would crash. I called Adobe and spent an hour on the phone with them to no avail.
Project workflow
- 700gb of 5d footage
- 20 sequences under 5 minutes
- Dynamically linked files with AE
- Warp Stabilized about a dozen clips of under 5 sec
- On every sequence color correction adjustment layer with RGB Curves, Three way color corrector and sharpen filter
- I kept old versions of the sequences (I was in version 5 before the crash)
What I have tried;
- Unsuccessfully tried to open auto-save files for this project.
- Successfully opened other older non relevant project
- Removed Mercury playback engine in the project settings
- Cleaned out media cache database through pp in media Preferences
- Manually deleted cache files in /Common/Media Cache Files and /Common/Media Cache
- Tried importing sequences into new .proj file; it would crash as a result.
What "worked".
I was able to open it on another computer. save it under another file name. bring it back to my original computer and open it without problem. I lost about 3 days working through this problem, I missed my deadline. and angered the client. I was able to use a friends IMAC to "fix" the problem, however I can't always count on him being there if it happens again.
Questions.
- What the hell happened? Why could I open it on one computer and not on the other?
- Is there a way to fix a corrupted .proj files on a PC?
- What should the average file size be, before it becomes unstable? (I'm pretty that my file size was bloated by all the previous versions of the sequences)
Windows 8.1 64bit
Premiere 2014.2
Intel Quadcore i7-4770 3.40GHz
16gb Ram

Hi,
I would suggest the following steps:
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Run a disk permission repair on your boot drive, and
Reset Home Folder permissions and ACLs Error | Apple Support Communities
Thanks,
Rameez

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine.

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine. All file types, Lightroom is no longer recognising the images to import, The panel that usually displays them remains empty. Try using backup versions, removing software that could conflict , still no joy, has anyone had this problem?

Did you follow this procedure?
Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd. DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

All items needs to be entered again in Import MIRO (for customs)

We are doing imports. Now when we have to pay customs duty, we do MIRO. For custom duty payment, i have to copy all the items (like material number and quantity) in MIRO screen which is very hectic.
So is there any way / setting where all the items are automatically flow to custom duty MIRO.
Please help

Hi,
In Import Purchase when you are entering the Bill of Entry
You have to select planned delivery cost.
All the Customs duty and other duties will be displayed.
Quantity and Amount will not be there as you have to enter that manually.
This is because the values are not what we have entered in the PO.
So what is there in the bill of entry only we have to enter manually.
This two items will not come automatically.
Also make sure that with Planned Delivery Cost Condition types you have to manually enter the Custom of Commissioner Vendor code in Purchase order.
Edited by: lolu jo on Oct 13, 2011 12:00 PM

Template.xsn. Access to locations on different site collections is blocked for security reasons

I am using sharepoint 2010 onpremise.
I created a custom list, content type and columns. After this I go to the list and click on the infopath button in the ribbon to customize the form. I changed the form and published to the server.
Now I get this error when I go to some page where I have added a infopath webpart:
The following location is in a different site collection:
http://www.myCompany.nl/someSubsite/Lists/VraagEnAntwoord/VraagEnAntwoord/template.xsn. Access to locations on different site collections is blocked for security reasons. For more information, contact your site administrator.
This website has anonymous access.
I have googled and found many people with this problem, but I dont find some solution. Someone talk about create a template from infopath and then publish it to a content type. I dont understand this solution. Can someone help?

You are actually running an older version of Firefox (8). You should update to Firefox 9.0.1 and see if that helps

Folders not available on removeable media when assigned a different drive letter

I have LR 5.2 and I move files off onto a removable drive as a back-up and it allows me to share the pictures with them when they sometimes lose them. Windows 7 routinely assigns the drive to the letter M:, N:, and sometime P: and apparently I cannot see the folders unless the drive is assigned the same letter as it was when I imported the pictures into the catalog. The folders don’t even show up in the library, but if I do an import all of the folders appear as valid destinations within LR. How can I fix this? The first picture is a screen shot of the library; notice that the year 2013 is missing. The second screen shot is what appears when I go to import; note that 2013 appears. The folders simply do not appear in LR except when I attempt import.
When I look at N: in my “working catalog” it shows it as having catalog “AUMC” but the folders in it belong to the part of my working catalog that I have moved to a different external drive since they’re old picture I don’t use much. They all have question marks, but they are resolved with I attach the external drive with those folders on it.

I do not have access to Windows 7 right now, just windows 8. I am certain that Windows 7 has the same functionality, but my directions to get there may be off a bit as it may have changed.
1) Connect your external drive to your computer, and check what letter Windows gave it.
2) Go To Start->Run and enter 'diskmgmt.msc' (without the quotes)
3) A new window will come up. Maximise it, so you can see it all.
4) Torwards the bottom, you will a white box with the drive letter of your external disk in it.
5) Right click on this white box and select 'Change Drive Letter and Paths' (This may be slightly different in Windows 7).
6) If the 'Change' option is available then click on that, otherwise select 'add'
7) I suggest here you select a letter near the end of the alphabet to minimise the chances of another drive using it.
8) Windows should now try to use this letter each time it mounts the drive.
If windows continues to change the drive letter, then make sure that you 'eject' the drive properly each time because if you do not, windows may think that the drive letter is still in use.
Alternatively, in step 6 above, select 'add' and in there, you can give windows a path on your C drive to mount the disk to (make sure that the directory you select is totally empty). Then the whenever you connect your external hard disk to your computer, the contents will be available there. If you go this route though, make sure that you only wite to this directory when your external hard disk is connected.

I think my spouse is using apps like YouMail and many more to throw me off her real location and different things of that nature. How do I tell if I'm miss informed?o

I think my spouse is using apps like YouMail and many more to throw me off her real location and different things of that nature. How do I tell if I'm miss informed?o

I suggest you talk to your spouse: honest communication is the only approach when this kind of question bothers your mind. There's no way that anyone here can tell you anything useful.

Freezing in import dialog when selecting "Import Preset" FIXED IN LR3.2

Hi all,
I have just installed Lightroom 3 and Photoshop CS5 on my Vista Ultimate 32-bit system.
When in the import dialog if i change any settings and click "Save Current Settings as Import Preset", Lightroom 3 freezes and after a minute displays the dialog to name the new Preset. After entering a new name for the Preset and clicking OK it freezes again! then eventually comes back.
I'm also getting freezes when selecting a different import drive, but that only seems to happen when using the external network drives and is possibly un-related.
I have tried running scandisk and defrag on all my drives (no change), Removing all external network drives (no change!).
My system config is as follows;
Windows Vista Ultimate 32-Bit 4GB RAM 2x 1TB SATA Hard Drives 3.1GHZ E8500 Dual-Core Intel CPU
Plenty of space free on both drives (500GB in each), Swap on D: Drive and O/S on C:
I installed by un-installing the Lightroom 2.6 copy and running the new install(in case it's relevant!)
Lightroom 2.6 was running perfectly before the upgrade.
Any ideas I can try?
Thanks in advance!
Message was edited by: drmcinnes
FIXED IN Lightroom 3.2 Update

No, factory presets are embedded inside Lightroom and cannot be removed.
Well, actually, they can, but this is undocumented and you'll have to do it after each update.
http://lightroom-blog.com/2010/09/getting-rid-of-default-lightroom-develop-presets.html

I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again. I can't uninstall as it isn't present in control panel

I've installed elements 12 but it won't open it's asking for the exe file but all it does when located is install again. I can't uninstall as it isn't present in control panel. When I open properties it asks to locate the exe or the other options don't work the target is invalid

Hi sambanyc,
What version of Adobe Reader have you installed on your Mac?
Please try installing on a different Admin user account and check if that makes a difference.
Regards,
Rave

Import Default Bin Location Using OITW - ItemWarehouseInfo.xlt

I am trying to import default bin locations in SAP B1 v9.00.058 PL.06.
I created a new OITW template using the Data Transfer Workbench, and then insert my data. I am only using two collumns from this template since I just want to specify the Default BIN for every item code. See attached for the original template as well as a test import file.
I followed the following steps for importing this data in the DTW
1. Master Data
2. Update Existing
3. Inventory - Item Master Data
4. Choose update file (See attached Test.txt), next to "ItemWarehouseInfo"
5. Run Update
When running the import I get an error message Update Failed "1470000335 Bin location not enabled for warehouse "Warehouse name"
The strange thing for me is that this error is probably quite logical, since my update file only specifies the Item Code and the Default Bin Location, how will SAP know which warehouse this Bin Location is to be configured for.
I would assume that it should be possible to specify a combination of the ItemCode and WarehouseCode when importing a default Bin Location, but the default OITW template, only uses the ItemCode as it's ParentKey.
Any suggestions? We have about several thousands of bin locations to be updated so the DTW is probably our only alternative?

Hi,
I have tried the above solution and it is not working. The DTW tries to set the Default BIN Locations for the first warehouse in the OWHS table. In our case this specific warehouse does not have Bin Locations enabled. We have several warehouses in the OWHS table and we want to import bin locations for specific warehouses. In our case it is the warehouse in Line 5 in the OWHS table.
We have tried to set the linenum field to 5 in the OITW import template but DTW still tries to import the bin locations to the same (first) warehouse.
Mias

Acess table located on different schema

hi ,
oracle 10.2.0.1.0
I have production database and i'm able to access video_asset_language located on different schema (CAM) of same db.there is synonym for the table here (at production ) .If I query user_synonyms the last column DBLINK has entry here.
Now from development DB I created a synonym for the table video_language_asset located in CAM schema. it says "translation error " . Synonym is created but not able to fetch from the table. If I query user_synonyms the last column DBLINK has no entry here.
Please suggest what I need to do .
thanks
Kishna

- Verify you have been granted select access to the table (from user_tab_privs_recd)
- Verify the database link exists, if not create it (get the definition using dbms_metadata.get_ddl
- get the correct synonym definition, and replace the synonym when (get the definition using dbms_metadata.get_ddl)
Sybrand Bakker
Senior Oracle DBA

Time Machine: Backup folder changing size when connected to different computers

Can someone please help me wrap my head around why the size of my Time Machine backup folder changes when connected to different computers? I tried to be as thorough as possible. Thanks in advance for taking the time to read this.
I made a backup of my one laptop (MacBook Pro running 10.6.8) before installing Mavericks. The backup folder size is 258.56 GB and it is on a 1TB WD external. There are no other computers backed up in this folder.
Last night, I tried to copy the backup folder to another 1TB WD external and ran into the “you can’t do that” message. After some researching, I came across articles explaining how Time Machine handles HDs and, in order for me to copy my backup folder, the drive I want to copy the folder to needs to have the “Ignore ownership on this volume” deselected.
Okay, so here is my situation: I have the “Ignore ownership on this volume” deselected and journaling is correct on the drive I want to copy the backup folder to. So I can continue working on my laptop, I want to use a different computer to copy the backup folder from one HD to the other. The problem I’m having is each computer I own is showing me a different backup folder size O.o.
(1) The computer I want to use – a Power Mac G5 Quad running 10.4.11 (non intel) – is showing a backup folder size of 592.7 MB, but the HD shows there is 258 GB being used. When I drag copy, I only get a 592.7 MB backup folder. For some reason, the backup folder is the only folder acting this way. I compared other folders from the same and different externals and all the sizes match up perfectly no matter the computer they were connected to. How is this possible?
(2) My second option - Mac Pro (early 2009) running 10.9.4 – is showing a 256.15 GB backup folder size. Very close, but not 258.56 GB.
(3) My last option is to use the computer I’m trying to stay away from, the MacBook Pro running 10.6.8. This is the computer I backed up and is showing me the correct folder size = 258.56GB. As I mentioned, I'd like to work on my laptop while copying the backup folder using one of my other computers.
I am able to drag and drop from each computer, but the folder size depends on the computer I’m using. I don’t understand why I can't do a simple drag and drop of a 258 GB folder.
Many thanks!!

The directory files that you are seeing are not real. They are links to the actual backup files that are stored in a hidden directory on the drive. If you were to look at the same drive on a pc, you would see the folders and you would a list files that are in the folders but the files would all be 0 byte files and Windows will tell you the file is empty because there is nothing there but a link which Windows does not understand.
So the point is you can't just copy the backupd files. The best solution that I know of (and maybe someone else will chime in) for copying them is to mirror the drive with something like Carbon Copy or some other program.
See this site for more information about time machine and how it works: http://pondini.org/OSX/Home.html

Trigger Between two DB located on different Server

Hi Everyone,
According to my project requirement I need your help to create a trigger on one table employee of my 10g DB located on server 172.128.1.62, which will trigger for any Delete, Update and Insert and update the same on its duplicate table located on different server(172.128.1.201).
Eg:
Table EMPLOYEE (on 172.128.1.62) refer as A
SrNo        E_Name      Salary
1             Fizzz           5000
2             Albert        8000
3             John          6500
Table EMPLOYEE (on 172.128.1.201) refer as B
SrNo        E_Name      Salary
1             Fizzz           5000
2             Albert        8000
3             John          6500
Now If I update table A and change salary of John from 6500 to 7000 and delete Employee Fizzz from table A
Then I need a trigger to get fired and update the same in table B
After table A updated table B should look like:
Table EMPLOYEE (on 172.128.1.201) refer as B
SrNo        E_Name      Salary
1             Albert        8000
2             John          7000
I already scratch my head but did not find anything, Now this is became very critical requirement, Please somebody help me to achieve this task.
Thank you very much,
Fizzz. Edited by: Fizzz on Sep 22, 2011 4:36 PM

I would not consider doing it myself with triggers. It will practically be guaranteed that at some point in time your data in B will by out of sync with A.
There are several methods of doing replication. At least two technologies can be chosen from:
[url http://download.oracle.com/docs/cd/E11882_01/server.112/e10706/toc.htm]Advanced replication
[url http://download.oracle.com/docs/cd/E11882_01/server.112/e10705/toc.htm]Streams replication
Both can be setup in various ways ranging from simple two-database one-way replication that refreshes periodically (for example a fast refreshable materialized view) to multi-database multi-way replication of complete schemas.
We have had success with relatively simple materialized views for one-way replication of tables from one database to another. Read chapter 3 in the Advanced replication guide ;-)

How do I set up different network locations with different wifi?

I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

Import Miro when location is different

Similar Messages

Maybe you are looking for