Import .mts files with FCP 7?

What I want to know is can fcp import/transfer .mts files?
What I have been doing is using HandBrake, which converts the files to MP4 format and then convert them with MPEG StreamClip into .mov files. Everyone keeps telling me I'm doing too many steps and that I can "just do it with fcp." So far, I haven't been able to do that.
So, right now, I have the sd card with the file structure intact. The files are in AVCHD format, filmed with a Sony αNex-5 camera. (from sony: 1080i (1,920 x 1,080), 60i (interlaced) fields/second HD recording in AVCHD format).

I'm a film student and I've taken non-linear editing courses featuring FCP. I'm not an expert, but I do know the basics of file importing/exporting/transfering, etc. I have used a GL2 and have done Log and Capture, Log and Transfer, as well as read the Canon manual and installed the Canon plug in for FCP. Sony has no plug in or support for Mac owners (they refer all fcp questions to this website) for this camera.
I've tried selecting every file at every level and I get the same response.
File structure (plus there are .cpi files in the clipinf folder, etc.) goes:
CARD
PRIVATE, AVF_INFO, DCIM, MISC, MP_ROOT,
AVCHD, SONY
BDMV
STREAM, CLIPINF, INDEX.BDM, MOVIEOBJ.BDM, PLAYLIST
00001.MTS
The camera shoots AVCHD 1920x1080i. I've read that AVCHD Lite cannot record interlace, so I assume this is not AVCHD Lite. Am I wrong?

Similar Messages

Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers

Cant read .mts files with FCP-X on external drive after recovery

I used Data Rescue 3 on my Imac to recover lost files. They came back on the external drive as .mts files but will not import to FCP X. Why?? Do they need to be in some kind of file for FCP X to recognise them??

Forum search is your friend.
FCP cannot import .mts files without the folder structure that contains their metadata. You can use ClipWrap to rewrap the files to QuickTime.

Premiere CS5 import.MTS file with no sound.

when I import .MTS file into Premiere CS5, the sound can not be import~
how can I put the video sound into premiere

So ..is yours the 'Trial Version'?
Read Trial Limitations
https://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_pro

Importing .MTS files into FCP 10

I just purchased a Canon C-100 and am delighted with the results. However, I need to know how to import the .MTS files into Final Cut Pro-10. I have imported the files to one of my hard drives, but FCP-10 does not recognize them.

Hi kennethcnelson!,
Final Cut Pro should support the MTS format. In order to be recognized, the files must be within the identical folder/file structure on the camera.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Import .MTS files from Panasonic HDC SD700 ( AVCHD )

Does anyone know how to import .MTS files with FCP7?
I have already tried it via the log and transfer way, that does not work for our .MTS files, even when I do it the same way described on this website for importing AVCHD footage from SDHC cards via the log and transfer.
Is there maybe a codec missing? Adobe Premiere can use the .MTS files natively.
Thanks,
Petra

The SDHC card gives 3 folders: MISC, PRIVATE and DCIM when I keep the original order and don't change anything in the folder it says when I use log and transfer-> adding files ->
"MISC" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
All the properties shown after adding the files are 00:00:00:00 and I cannot play or preview the files in the log and transfer screen

AVCHD: how to deal with the .MTS files in FCP 5 or iMovie 08

I just bought a Canon HF10 AVCHD camcorder and stumbles into the difficult editing process with FCP 5. Here are my steps:
- Conversion of the camcorder .MTS files with iMovie 8; they are then transformed into a .MOV sequence. A 14secondes sequence recorded in the highest quality (FXP, 17Mbps) is captured as a 28MB .MTS file by the camcorder, rendered as a 231MB .MOV file by iMovie 8, and it took 53 sec to process it !
- I export the sequence as: Share >Export Final Cut XML…
- In FCP 5: import XML…then I tried different modes: AIC 1080i60 (image is overstreched), AIC 720p30 (proportion is OK, but I captured in 1080…), AIC DV NTSC 48kHz (not HD…) BUT none of the resulting sequence is rendered, I still have the red bar above the timeline.
For financial reason, I’d like to avoid to go to FCP 6, which seems to work natively with the AVCHD format.
My questions are:
- is there a way to reduce the size of the iMovie converted files: 900MB per minute ?
- is there a way not to have to render the imported files in FCP ?
Can anyone help me ?

I have the same camera and the reality is you're going to go through that translation from AVCHD to some sort of Quicktime file format no matter which tool you use. I do it with FCP6 and it needs to do the same translation from the .mts files to (they recommend) ProRes files. AVCHD is a highly compressed format and when you move it to an editable form, the file(s) is going to get much larger. It is HiDef content after all which can be quite large.
In my case, once I do the transfer to ProRes format nothing needs to be rendered in the FCP timeline unless I add some sort of filter or effect to it.
The rendering problem you are describing is often caused by the Sequence setting not matching the content settings. This is automated in FCP6 where it detects the content format of the video you're trying to add and changes the sequence settings to match the content. Take a look at the sequence settings and see if they match the structure of the content and that should resolve the 'everything needs to be rendered' situation.

Problems importing .mts files from camera in FCP 10.1.

I am having trouble importing with FCP 10.1. Can anyone advise me on importing .mts files after the upgrade? FCPX used to do it automatically when I attached camera!

What kind of trouble? What appears in the import wimdow when you connect your camera?
Rus

Can I import Sony .mts files with seperate audio layer into AE?

I can import .mts files from my Sony SR11 OK but the audio is in the same layer as the video content.
When I go to Edit/Edit in Adobe Audition and Audition opens Audition reports in details box, "Error:File not supported by any currently registered plug-ins."
The Audition Audio Plug-in Manager shows no available plug-ins.
Can I import the .mts file as seperate layers as one can with Premiere Pro? Alteratively perhaps, what plug-ins should I look for to add to Audition?

AE doesn't separate audio. You'll have to do it elsewhere, possibly in Premiere Pro or tools like ffmpeg/MPEGStreamclip. It's odd, though. since these components are the same in all the suite apps, a file that works in AE should just the same open in AU (without showing teh video in teh worst case). .mts is just MPEG2 or AVCHD in disguise, anyway, which the apps should open without a hitch - if it's not out of spec. I'd look into your camera settings, though. maybe you recorded to the wrong channels or an odd audio sampel rate and it's messing things up.
Mylenium

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

>No, you are not right.
Going to question the biggest contributor to this forum? (Yes, my ego is talking). OK then...
>Install the QT-Plugin, restart your Mac and you will be able to import and use .mts files in FCP 7.
Sure...yes, that makes it POSSIBLE to read the files natively in FCP...if they come from a Panasonic camera. BUT...just try working with those files. Right away the system won't be nearly as responsive as it would if they were ProRes. First...there are no sequence settings for that format...so you'll have to use ProRes and have a green render bar. BUT, that's no big deal. The big deal is trying to work with the AVCHD format, which is VERY processor intensive...inside an application that doesn't like to work with much outside of the FCP editing codecs.
Is it possible? Sure? Will it work well...will you be as zippy and error free as if you converted to ProRes? Not by a long shot. OH, but don't just take my word for it. Go ahead...try it and see. No skin off my nose...no waste of my time. See how well this works.
I'm just here to relate real world working solutions to issues. And yes, I did try that plugin, and boy, was editing a pain.

How import mts file from sony nx5 in final cut pro

how import mts file from sony nx5 in final cut pro

LOG AND TRANSFER. I have the full workflow here:
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
Make sure you are running FCP 7.0.3. That version deals with files from the NX5 the best. If you are on a previous version, like FCP 6....you will need to use CLIPWRAP2 from Divergentmedia.com. As the specific AVCHD format the NX5 uses is something that FCP 6 cannot really deal with.
Gotta love new camera formats.

FAQ: How do I troubleshoot audio issues when importing .MTS files?

Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.

Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Not able to import .motn files into FCP

For some reason I'm not able to import .motn files into FCP. While in FCP, I use "send to motion" and uncheck the embed box. After motion opens and I add my motion content, I get the following error when trying to import the .motn file back into FCP "File Error: 1 files(s) recognized, 0 access denied, 1 unknown". What is strange is that I'm able to create another test FCP project with different media, and everything works fine. All tests and media are done on the same drive.
I'm using the latest updates of everything FCP 5.0.4 and motion 2.0.1
Any ideas anybody?
Thanks!
G5 Mac OS X (10.4.6)

Check the frame rate - that can sometimes interfere...
Patrick

Export 16:9 .move file with FCP

Hello,
Since May this year I cannot export my FCP 16:9 project to a 16:9 .mov file anymore. The last good one I exported was May 4th, 2009. When I open this QuickTime file with FCP it is widescreen. I exported the same project on May 27th. That .mov file is letterboxed when opening it with FCP.
I never used QuickTime Pro because this program could and can only display my videos letterboxed.
I tried several options to try to export the movie 16:9 (Current Settings, DV PAL 48 kHz Anamorphic).
Someone advised me to use the Cmd-J option in Quicktime, but before May 27th, the export was good and I could use it in iDVD. But since that date it is not possible anymore. When importing the movie directly in iDVD, it is 4:3 format. And after changed it to 1024 with Cmd-J in QuickTime it is halfwidescreen in iDVD (looks like 14:9 i.s.o. 16:9)
How can I get my old good working version of FCP back I had on May, 4th and earlier ?
Or how can I export to QuickTime movie that gives me a 16:9 video again as it was before May 27th ?
Thanks,
Hubert

Hello,
I tried a new 16:9 project. In this new project FCP the video is exported in 16:9 format.
So there must be somewhere a 16:9/4:3 option switch in my old 16:9 project.
Where can this option be set to 16:9 ?
Thanks,
Hubert

Can't import audio files in FCP after snow leopard update

i've recently updated to snow leopard. and i'm running Final Cut Pro 6.0.6
i opened a .fcp project i created a long time ago. i tried to import a .aif file and final cut crashes. i converted the .aif file to a .mp3 file. tried to import it, and final cut crashed.
i then went and deleted the preference files for final cut pro, reopened final cut, tried importing both files again, it still crashes.
does anyone have a legitimate answer for why this is happening?

BenB wrote:
1st, FCP does not officially support MP3 audio files, so don't even use them. I'm running FCP 7 on Snow Leopard, no problems with audio files.
1- How are you encoding them? What software is creating these files?
2- Are you running on an external FW800 drive?
3- How much RAM are you running?
And as my final observation is, NEVER run Final Cut Pro 6 on Snow Leopard! Huge no-no! If you upgrade to Snow Leopard, only use FCS3. I've updated lots of systems for my students and clients, and I've seen lots of FCP6 on SL problems.
Message was edited by: BenB
I agree that you shouldn't use MP3 files with FCP, the manual tells you that somewhere If I recall properly, but it shouldn't cause Final Cut to crash, at least that has never been my experience, it has just caused a skipping problem, or not playing the complete song.
I don't really understand wht a FW800 drive or the amount of RAM have to do with it, it would sure be interesting to hear your comments on that.
However, in all due respect, to make the statement that one should NEVER run Final Cut Pro 6 on Snow Leopard seems pretty "out there" would you be so kind as to provide your rationale for such a drastic statement as that. Has there been anything official from Apple along those lines?

Import .mts files with FCP 7?

Similar Messages

Maybe you are looking for