Import multiple Articulate Engage interactions to a single CP4 project

Hi
This question is about importing Articulate Engage interactions into a CP4 project. I have searched the forum and can't find a specific answer to this. Any feedback would be really helpful.
-> I already know how to import 1 single Engage interaction into CP4, insert as an animation onto a slide, and have it play perfectly in published SWF output.
My issue is: How do have multiple Engage interactions in the one CP4 project, when Engage always gives the published Engage interaction and all its supporting files/folders the same file name (I.e. "engage.swf" file and "engage_content folder"?
If, for eg I want ot have 3 Engage interactions in the CP4 project, is it ok to just rename each published Engage interaction differently, prior to inserting the interaction as an animation to the CP4 slide?
Does anyone know if this will work, or if there is another solution?
Thanks in advance!

Http 1.1 is not supported. You could implement that yourself...
try to move the openconnection into the while loop. that should work

Similar Messages

Does anyone know how to insert an Articulate Engage interaction into a Captivate 2 project?

I would like to insert an Articulate Engage interaction into
a Captivate 2 project. And,er, that's it really. Does anyone know
how to do it? When I try to insert the Articulate project as an
animation, it functions fine in the preview screen, but once it's
been inserted all I get is the loading screen.

Hi again darren.winter
If I were in your shoes, here is what I'd try. Place the
content from Articulate in a specific folder. Then publish your
Captivate to the same folder to ensure all files are there
together. Then test. Obviously, this may work or it may fail. And
just as obviously, if it works, you're done!
If it fails, I think I'd try publishing my Captivate using
different settings. Try publishing for different Flash versions.
You might find that if you target Flash 6 it fails, but 7 or 8 may
work.
If the Flash version bit fails, are there some settings in
Articulate that allow you to reduce the number of files that are
required? For example, I know that when Captivate 2 came out, many
folks had to scramble (and some still do) over the fact that it
produced multiple output files. Some LMS' didn't like the fact
there were typically two .SWF files to distribute. We then learned
we could eliminate one of the .SWF files by turning off the
borders. So I'm wondering if perhaps Articulate may have similar
output options you could use.
Hopefully something here helps... Rick

Is there any way to import multiple video files into a Logic Pro X project ?

Hi All,
Im working on score for a movie, I have multiple video clips that I need to make score for. Im wondering if there is a way to import all the video clips in to a single LPX project.
Thanks.
Ara

No, Logic allows only one video file per Project.
You have to edit them together in iMovie or Final Cut Pro first.
However, the common workflow in film scoring is one Project per cue, so if there are no overlapping music cues between the videos, it shouldn't be a problem
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to import multiple Excel/CSV columns into a single Sharepoint metadata choice column?

Consider: I work for an organization that has eight service territories. We have a series of procedural documents that can apply to from one to eight territories. We are moving this data over to sharepoint, and I'd like to add territory
data as metadata. Unfortunately, with our current knowledge management system, the best we can get is 8 separate fields flagged as yes/no.
is1 is2 is3 is4 is5 is6 is7 is8
1   0
1   1   0
0   0
0
0   0
0   1   1
0   0
0
0   0
0   0   0
0   1
0
I would like to be able to import this data into a SINGLE sharepoint metadata column as Choice/checkboxes/allow Multiple values. Is there a way to do this? We're using Foundations 2010, and our area does not have access to
development tools (including SPD).

Thanks for the reply. We have eight individual Columns in the Excel File, and when we do the import to Sharepoint, yes we get eight individual metadata columns.
I would LIKE to be able to import the eight columns into ONE column in Sharepoint.
Consider three documents.
Doc1 is information applicable to Territories 1,3 & 4.
Doc2 is information applicable to Territories 4 & 5.
Doc3 is information applicable to Territory 7.
      is1 is2 is3 is4 is5 is6 is7 is8
doc1   1   0
1   1
0   0   0
0
doc2   0   0
0   1
1   0   0
0
doc3   0   0
0   0
0   0   1
0
This metadata would import to a SINGLE column in SharePoint called IsTerritory, which is defined as a Checkbox (multiple values) Choice Field, limited to the values 1-8.
Doc1 would have checkboxes 1,3, & 4 checked, Doc2 would have checkboxes 4 & 5 checked, and Doc 3 would only have checkbox 3 checked.
Does that make a little more sense? I'm having problems validating my account, so I can't upload screenshots yet...
Thanks in advance for your reply.

Multiple (different) DVD outputs from a single Encore project

I have 5 DVD's to output. Each of them is based off the same menu template. (see attachment) What will be changing from one DVD to the next are the number of buttons and the "workshop" title. Is it possible or advisable to copy the menu that I have done already, modify it and output it as a new dvd all in the same encore project file? (Without altering the one I have completed already) I hope that made sense. Or do I need to have a new Encore project for each DVD?
TIA
Dean

I agree with the others, and it's basically the way that I have done multi-disc Projects.
I first set up a Project, and Import all Assets, that are common across all Projects, arranging them in appropriate Folders/Bins. Then, I Save that Project, to be used as a "template," for each disc in the set. I also make a Copy of that Project (complete), just in case I forget the next step. I Open my "template" Project, and do a Save_As, with the disc number in the new name. I Import all unique Assets, modify my Menus, and do any required linking. If OK, I then output. For the next disc, I Open that "template" Project, and repeat the process, incrementing the Project's file name to reflect the next disc, say_02, in lieu of the first one's _01. Repeat.
I've used this workflow for Projects that were up to 18 discs, with no problems.
Just plan your "template" Project out, so that you will only have to Import material, that is unique to that disc.
Good luck,
Hunt

How to import an Engage interaction into Captivate 6?

Can someone please advise how to import an Engage interaction into Captivate 6?

Welcome to the forum,
Articulate Engage interactions are still AS2, if it hasn't changed recently since I checked last time. This means that you cannot insert them as an animation. However, you should search on the Articulate forum (always pointed at so much better than this one ) because there is an explanation how you can insert them as webobjects.
If this still is indeed AS2, too bad, but Articulate should urgently upgrade to AS3,
Lilybiri

Images in Engage Interaction inserted into CP4 project not displaying....

Hi all
If ANYONE has an idea on this one, please let me know. I've already spent days trying to fix this issue with no result!!
I have a CP4 project, in which I am inserting an Articulate Engage interaction (interaction type = Process). Within the Process interaction, I have images. I have trawled forums and found out there is a recommended max image size (200 px x 310 px) and image type (jpeg or png) and I have also discovered that Process interactions prefer that images be aligned to either the left or the right, and not top or bottom. Done all that.
I also already know how to insert Articulate Engage interactions into CP4 projects - done that many times before. It's fiddly, but once you know how to do it, it's ok.
My problem is that when the CP4 project is published, the CP project plays perfectly, the Engage interaction displays as it should, each part of the Process interaction is visible and active, BUT THE IMAGES WON'T DISPLAY.
When I publish the Engage interaction (prior to inserting the engage.swf into CP4 as an animation) it plays perfectly, and the images display. When I view all the associated folders with the published Engage interaction, the images I've inserted are all there.
I cannot for the life of me work out what is going on. I have even re-created the Engage interaction from scratch, thinking it might have been corrupted somehow.
DON'T know what to try next.
Does anyone have any ideas????

in between the browser and viewer panes is a little search box ... click in it to change ... or if there is an 'x' in click it ... somehow you set a filter on that project ...

Import Multiple XSD Files

Is it not possible to import multiple xsd files. If a single file is used there is no problem but when the second import statement is added, it will not compile.
It complains that it cannot find one of the element types. Removing the second import it compiles fine.
I also tried it using seperate schema tags for each import.
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
   <import namespace="http://TargetNamespace.com/ftpadapter"
           schemaLocation="delimited_2.txt"/>
   <import namespace="http://xmlns.oracle.com/FTP_Test"
           schemaLocation="FTP_Test.xsd"/>
</schema>
</types>

It is possible to add multiple XSD's in WSDL.
1. Did u add different namespace alias's for these two in <definitions> section ??
2.How you are referring the element which it can't find in the wsdl ?
Try this to identify the issue
"remove the first xsd and use the second one alone. "
If this works then it eliminates that there is an issue with xsd.
Thanks,
Satish
http://soadiscovery.blogspot.com

I got Articulate Engage into Captivate but am now stuck

I am able to make an Articulate Engage interaction into a Captivate file, I don't know what to do with it after that. This engage interaction is just a piece of a tutorial, not a stand-alone learning object. I was hoping I could publish it as a Captivate file and then stick it in Adobe Presenter like I normally do with Captivate interactions (using insert swf in the presenter tab). However, it is not working. It just looks like it is loading. I understand there are dependent files that must be involved in this process somehow, but I don't understand what I need to do with them. Any assistance is appreciated. I also would be fine with putting my ppt into Captivate if that is easier. I tried that and it just skipped over the slide that was supposed to have the engage interaction on it (with the animation) but maybe I didn't publish it to the right place to find those dependent files.
I followed these instructions to make engage into captivate http://blogs.adobe.com/captivate/2009/05/shifting_to_adobe_elearning_su_2.html so no need to refer me to there or another similar forum I found on here.
Thank you in advance!
April

Hello,
I had the same problem! The solution I did was to copy and paste the contents of the published Engage (or Quizmaker) main folder into the published Captivate folder. I pasted a screen shot of how the published Captivate folder should look for it to work; The Captivate project is named Captivate file Testing Quiz maker, and you can see all of the published quiz files pasted into the Captivate published folder:
Hopefully this helps!

SCRIPT TO IMPORT MULTIPLE PLACED IMAGES..AND OUTPUT MULTIPLE IMAGES TO SINGLE PDF.

Anyone got a script to import multiple placed images into CS4? or is this possible in CS5?
and can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each page... would be a huge time saver for me.
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..
I`d also like to be able to CTRL click multiple layers and go save as... only those layers get saved out...
And so adding something in the Save for PDF output dialogue box to save layers to multiple pages would be a helpful time saver..

In CS 4 and CS 5 you can drag and drop fro m the finder or the Bridge, and I guess any other similar type viewer, multiple number of image files to a document. You can configure the bridge in such a way as to allow you to see the Bridge and your document at the same time for this very purpose.
If you just drag and drop the files are linked if you drag while holding the shift key then the files will be embedded.
ID and PS CS 5 have a minibridge which works the sam way but is an actually panel and will stay in the front.
I separate the images but they import one on top of another.

Import Engage Interaction into Captivate 4

I know this has been asked many times, but I just can't
believe that this is not possible, especially in Captivate 4. Can
someone please tell me how to import an Engage interaction into
Captivate 4? I tried as an animation and it converts it to a
preloader.
Thanks,

Hi - I've been having a huge struggle trying to get my Engage interactions to play in Acrobat Connect Pro during my virtual classroom sessions. In other platforms (Webex, Centra, Live Meeting) I've had no trouble using Engage interactions as a way to keep the content interesting and, well, "engaging." But Connect Pro simply refuses to play them. Someone told me to try publishing them to Captivate (e.g. Importing them into Captivate and then publishing the SWF), and then uploading the Captivate SWF to the Connect Pro library. I was encouargaed when I saw your seeminlgy easy steps.
However, I tried them and they didn't work. I guess I wasn't surprised because you say to first publish the Captivate file to "any folder," and then go into the Preferences, check the animations box, and you should now see the Engage SWF in the folder with the Captivate output. How could the Engage SWF just appear? It would seem that the correct way to do this is to go to Preferences before publishing, check the "Animations" box, and then publish. In any case, even when I do it that way, I do get a Captivate SWF that plays my Engage interaction, but when I upload that to the Connect Pro content library, it still won't work.
Are you sure you've actually tried this? I've checked with a few people and they all agree that once it's published, going back into Captivate and checking a box in the Preferences simply won't cause a new file to appear in the Captivate output folder. Just curious... I figured you may want to correct this so future readers aren't confused by it.

How to import multiple DNG files into Premiere

I want to import multiple raw DNG files from a 2.5K blackmagic camera. Each clip is recorded in a separate folder:
I can import each clip separately by selecting its folder and clicking on a DNG file, but -for obvious practical reasons- I would like to import ALL clips at once. However, when I try to do so, Premiere does not import the clips. Instead, it imports each folder, and within them there is not one single clip, but as many clips as DNG files compounded that particular clip. In other words, if the clip had ONE HUNDRED DNG files, Premiere imports that clip ONE HUNDRED times, not just once:
In this image, each file contains the ENTIRE clip, not just a DNG file. Is there a workaround for this? Otherwise, DNG files must be imported one by one, which of course makes the workflow much more difficult.

Jim, when selecting the blackmagic2 level, the only available option is File Directory:
This doesn't happen with RED files, where you can choose between File Directory and RED from the first level. Unlike blackmagic's DNG clips, RED files can be imported all at once, so maybe that's the whole problem:
And yes, Source Settings are available for RED files, whereas they are not for DNG (only basic information, not raw manipulation):
RED Source Settings:
DNG Source Settings:

Importing multiple Word docs into InDesign

Hi there
Is it possible to import multiple Word documents into a single InDesign text frame all at once?
I have 20 files that all flow sequentially so was wondering if -- by selecting them all in Place window -- they would all be brought in one after the other, without each one creating its own new text frame.
Any help gratefully received.
Thanks
Dan

I use the script, below, for that. It's a bit scruffy, it should be tarted up. But it works fine. When you start it you type a path/file mask, using the formats illustrated in the dialog.
It sets a few import preferences, these are the only ones I'm interested in. But it'll pick up the other options from their current settings.
Peter
// Description: Place multiple textfiles as one story
#target indesign
preset = '/d/test/*.rtf';
app.wordRTFImportPreferences.useTypographersQuotes = true;
app.wordRTFImportPreferences.convertPageBreaks = ConvertPageBreaks.none;
app.wordRTFImportPreferences.importEndnotes = true;
app.wordRTFImportPreferences.importFootnotes = true;
app.wordRTFImportPreferences.importIndex = true;
app.wordRTFImportPreferences.importTOC = false;
app.wordRTFImportPreferences.importUnusedStyles = false;
mask = prompt ('Enter a file path/mask.\r\r' +
    'Examples:\r' +
    'd:\\books\\test\\*.rtf   /d/books/test/*.rtf', preset);
if (mask == null) exit(); // Cancel pressed
ff = Folder (File (mask).path).getFiles (File (mask).name);
if (ff.length > 0)
    placed = [];
    missed = [];
    tframe = app.documents.add().textFrames.add({geometricBounds : [36, 36, 400, 400]});
    placedstory = tframe.parentStory;
    app.scriptPreferences.userInteractionLevel =
        UserInteractionLevels.neverInteract;
    pb = initprogressbar (ff.length, 'Loading');
    for (i = 0; i < ff.length; i++)
        pb.value = i;
        try
            placedstory.insertionPoints[-1].place (ff[i]);
            placedstory.insertionPoints[-1].contents = '\r\r';
            placed.push (ff[i].name);
        catch (_)
            missed.push( ff[i].name );
    app.scriptPreferences.userInteractionLevel =
        UserInteractionLevels.interactWithAll;
    inform = '';
    if (placed.length > 0)
        inform = 'Placed ' + ff.length + ' files (in this order):\r\r' + placed.join ('\r');
    if (missed.length > 0)
        inform += '\r\rCould not place:\r\r' + missed.join ('\r');
    delete_empty_frames ();
    alert( inform );
else
    alert (mask + ' not found.');
// End
function delete_empty_frames ()
    app.findGrepPreferences = app.changeGrepPreferences = null;
    app.findGrepPreferences.findWhat = '\\A\\Z';
    var empties = app.activeDocument.findGrep (true);
    for (var i = 0; i < empties.length; i++)
        empties[i].parentTextFrames[0].remove()
function initprogressbar (stop, title)
    progresswindow = new Window('palette', title);
    progressbar = progresswindow.add ('progressbar', undefined, 1, stop);
    progressbar.preferredSize = [200,20];
    progresswindow.show ()
    return progressbar;

InDesign CS3 Scripting XML Import Multiple Images into same Text Frame

I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out like how Microsoft Word handles inline images, i.e., laying out next image to the right of previsous image in the same line and if there is not enough space left in the line, then wrap to next line. Thanks in advance. I understand I could use JavaScript to do post import processing, e.g, calculate the image size and place each images accordingly. But I am trying to see whether there is a way to do this without scripts.

You can apply an object style to all anchored images by script. A text frame containing main flow should be selected.
var doc = app.activeDocument;
var textFrame = app.selection[0];
var rectangles = textFrame.texts[0].rectangles;
if (rectangles.length > 0) {
for (var i=0; i < rectangles.length; i++) {
rectangles[i].appliedObjectStyle = doc.objectStyles.item("Cover");
However, there is a better approach:
Step 1
Create place holders for a single "Book" element and format it as needed -- apply an object style to the cover.
Step 2
Import the xml file -- the placeholders are replaced with data from the 1st xml element
Step 3
Drag & drop the element containing all "Books" elements into the main flow -- all elements are placed and formatted the same way as in step 1.
Finally, add a new page, click the overset text icon and autoflow text to add pages so that to fit all the text.
Hope this helps.
Kasyan

Conflict between Articulate Engage swf and Quiz Manager

I am inserting an articulate engage swf into my Breeze presentation and my Presenter quiz questions do not work correctly after inserting the engage swf.
My process has been to publish the engage swf which also publishes a content folder....Then I insert the engage swf into the powerpoint presentation....Then publish the presentation locally with Presenter. I then have to add the engage content folder to the Presenter output folder structure in data > resources.
My slide presentation also has Adobe Quiz Manager questions in it. THe problem i am having is the quiz questions will not advance with the engage swf in the presentation. The kicker is, the quiz questions will work if they are on slides that come before any slide with engage content on it. for example if there are a couple of quiz questions in my presentation and the first one is on slide 5 followed by an engage swf on slide 6, this first quiz question will work. If the next quiz question is on slide 7 it will not advance after the user answers the question. If i skip the slide with the engage content (by going from slide 5 to 7) the 2nd quiz question will work just fine. It seems that loading the engage swf causes a problem for the quiz questions that come after it .
Has anyone had this type of problem?
thanks in advance. - Mike

Hi Mike!
I actually ran into a problem similar to what you've written about here.
Here's a suggestion to try; you may experience weird / unexpected results, but it may be worth a try....and who knows, it could help!
Here goes:
Rather than using one quiz container for your content / course, what I'd like you to do is break up "non-contiguous" question slides into totally separate quiz containers. I think what you need to avoid is having any kind of flash interactions from Engage running between a set of question slides stemming from one quiz container.
So instead of having a question on slide 5, an Engage interaction on slide 6 and another question on slide 7.....I want you to try breaking that up so that it looks like this:
Question on slide 5 [from quiz container 1], Engage interaction, question on slide 7 [from quiz container 2]...and so on.
Here's the deal: I've personally seen instances where adding custom Flash animations between question slides have caused some interference with the functionality of question slides. Even though you're using a totally different product, Engage still employs code parameters that can cause some breakdowns as soon as you publish your Adobe Presenter content, and I think that's what's happening here. To be brutally honest, I don't have Engage, but I'd be willing to bet it's causing the same problems that I've encountered with Flash animations that I've tried to incorporate into my Presenter content.
So again, try breaking up the question slides into separate, independant quiz containers and see if that resolves the problem....I'd be curious to know if that works!
Rob
http://www.robrode.com/yabb/

Import multiple Articulate Engage interactions to a single CP4 project

Similar Messages

Maybe you are looking for