Import multiple files

I have made plugin based on custom importer, now I can import media files using my custom GUI.
But now I'm little bit confused, is it possible to import multiple files using SDK ?
I mean:
1. Chose several clips in my GUI.
2. Click ok and files will be added to project.
Thanks.

Thanks for answer Steve.
But, how can it help me ?
I have found in docs:
imGetInfo8
param1 - imFileAccessRec8 *
param2 - imFileInfoRec8 *
Describe a clip, or a single stream of a clip if the clip has multiple streams. Called when a specific
file is instantiated. Importer checks file validity, optionally allocates file instance data, and de-
scribes the properties of the file being imported by populating the imFileInfoRec8.
and
imIterateStreams
Return from imGetInfo8 to indicate that there are more streams
to describe. Premiere will send imGetInfo8 for the next stream.
So, as I understand, imIterateStreams describes just media streams of single file,
but it has no relation how to specify multiple files during import.
Now I'm using imGetPrefs8 selector to specify file path.
Please explain me where I'm wrong.
Thanks,

Similar Messages

How to import multiple files to the frame area?

How do I import multiple files to create animated GIF's. I
know how to import multiple files into the Fireworks, but if I'm
trying to create an animated gif that has alot of files, How do I
get them into the frames area. It is really a pain importing each
and every file one at a time frame by frame

merry1
after you bring in all your images to the canvas, select all
and in the
Frames Options drop down, select Distribute to Frames.
You can bring multiple images onto the canvas by copy and
pasting from
the folder(s) where they exist.
alex
merry1 wrote:
> How do I import multiple files to create animated GIF's.
I know how to import
> multiple files into the Fireworks, but if I'm trying to
create an animated gif
> that has alot of files, How do I get them into the
frames area. It is really a
> pain importing each and every file one at a time frame
by frame
>

InDesign CS3 crashes when importing multiple files.

I've got a new box that's been running pretty solid for several weeks now. It's Win 7 with 8 gigs. Just last night it starts crashing when I'm importing multiple files. Doesn't matter if it's JPGs, TIFFs, or PDFs.
I can import all the same files one by one using the place command.
Importing multiples using the place command or dragging & dropping crashes.
It's not a case of placing a PDF using the bleed box and no bleed box is set. And that usually doesn't crash InDesign, just fails to import.
I deleted the preferences file to no avail.
CS 5.5 has no problems. No, I can't just use 5.5. I'm the only person with it and really only use it for converting files for customers that don't have the common sense to send a PDF. Other people in the shop have to be able to open these same files.
Any ideas? This is already a pain since one of my main jobs is ganging business cards 72 up on a sheet.
Thanks,
Mike

Only difference between with and without the plugin is the Faulting process id, Faulting application start time, and Report Id...
Faulting application name: InDesign.exe, version: 5.0.0.458, time stamp: 0x45f900b6
Faulting module name: APPFRAMEWORK.RPLN, version: 5.0.0.458, time stamp: 0x45f903d0
Exception code: 0xc0000005
Fault offset: 0x0001b8b0
Faulting process id: 0x2ac
Faulting application start time: 0x01cd4b1c9256c068
Faulting application path: C:\Program Files (x86)\AdobeCS3\Adobe InDesign CS3\InDesign.exe
Faulting module path: C:\Program Files (x86)\AdobeCS3\Adobe InDesign CS3\Required\APPFRAMEWORK.RPLN
Report Id: ec708910-b70f-11e1-ad4c-e840f209298e
There's also a .net crash but not with every instance of the InDesign crash.
Application: InDesign.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 0AD6B8B0
Stack:

Import Multiple Files In One Pdf Size

Acrobat 8, Windows XP
I have multiple files with several paper sizes and want to import them all A4 size, in pdf. When I import them, each page is a different size, how can make all pdf pages A4?

The problem is that I cannot change the pages size before I transform them to PDF files. The crop tool will not do, because I have to change the pages proportionally. With this tool I can crop only the page, the image will maintain its original size...
Thanks anyway :-)

Problems importing multiple files into iTunes

I'm running the most recent version of iTunes. When I try to add multiple files to my itunes library a box pops up and it seems to be importing, but when the box closes, the files are not in my library. I can only add 2 or three files at a time, but no more than that. This didn't happen with the older version of iTunes. Is anyone else having the same problem, and is there a way to solve this? I have tons of files that I want to import, but at this rate, it will take months to import them. Please help!

flash is limited to 16,000 frames.
use several swfs and load them into a main swf.

Importing Multiple Files, or Folders into FCE?

Hello Hello
I was wondering if there was a way to import several files or folders at ONE time so that you wouldn't have to contnually go back to re-navigate the path to import?
Illustrations:
http://www.locationstudio.net/import-1.jpg
http://www.locationstudio.net/import-2.jpg
Thanx
Mike

HI TOM
And Michel too!
Thanx again my friends
Ok Tom - you're always providing such great tutorials, I thought I'd give a little back. As, I'm a little brain-dead, perhaps these screens may provide help for others also looking to bring several items into your FCE project to add to your Bin List:
http://www.locationstudio.net/browse-1.jpg
http://www.locationstudio.net/browse-2.jpg
http://www.locationstudio.net/browse-3.jpg
http://www.locationstudio.net/browse-4.jpg

Incorrect order after importing multiple files into iMovie 11

If I use Toast to burn multiple .DV files (converted by Toast) using compress onto a single layer DVD, I get a pause between each file, so I wanted to put them all into the one file before burning.
Problem.
Imported 5 .DV filles into iMovie 11 New Event as a block. Exported as Quick Time. Found file order not correct, eg File 1 was in position 4.
Tried importing in 1, 2 order and it appeared as 2, 1. Imported in 5, 4, 3, 2, 1 order but it turned-out to be 2, 3, 4, 5, 1.
File 1 was the last one converted, so it appears iMovie puts it in date/time order. I can't find a 'sort' like iPhoto has. Also, I can't find anyway of sorting in this forum.
Does anyone know of a way to sort New Event videos so that I can drag them all to the project in one go? I've tried one-by-one, but get a gap in between each one.
Alternatively, how do I drag each New Event video to the Project without any gap between them?
Before you suggest it, I've tried iPhoto and export as Slideshow. Problems. Converting orig to .Mov (HD) eventually produces bad vieo after a hugh amount of total processing time and iPhoto deosn't recognise .DV.
Any ideas?

Since my posting, I've found a way to do what I wanted.
Set 'Drag to adjust number of frames per thumbnail displayed' slider to All. This creates a single frame for the whole file.
Moving the cursor over one frame displays its contents and I can work-out which is the first, etc.
Select the whole file by pressing Option before clicking on the one frame.
Drag the file to the lower part of of the Project window (automatically puts it into the next position).
This gives me all the files in the correct order and with nothing missing or gaps.

Unable to Open/Import Multiple Files in Audtion 3 - Old Bug?

As stupid as it might sound I can't seem to open more then single files from the Files Window in Audition 3.0.1. You can select them (shift+click or right click) but they don't open. However if you drop them from explorer or "open file with" they do open but then the next issue emerges.... They are not saved in the session file UNLESS you use them in the Multitrack View!! Now is this me or is it an old bug or something? (I've recently updated from Audition 1.5).
The files I've tried are mainly wav-files and mp3. Same result though.

Ooo? So UNSED files are NOT reloaded in the session file! Well, thanks for
clearing that up (Still, I must say it makes it a bit frustrating though!).
My impression was that, as I used Audition 1.5 before, I was quit sure it
was possible there! But then again it's been a while since I used that
program too in a major scale. (I've been working in much After Effects
lately, wich of course has another handling of files).
As for the Files (Edit) View, I still can not open more than ONE file at the
time from that location - regardles of Multitrack or Edit View, really!
ShiftClick, CtrlClick, Right Click - you name it. Yes, select them but
open? No can do!! Now, as I mentioned before there is the workaround when I
select the files in explorer (Windows) and then drops them in Auditions
File View - they all then load accordingly (Or you can aslo use "open file
with" then point to Audition). Otherwise, once the files are imported,
there's no problem working with them in Multitrack/Edit and do all the rest.
Yet, it is a bit absured though and hard to tell whether it's a bug or not
(?). Virus?
Anyway, thanks a bunch!
Daniel
2009/5/19 Eric Snodgrass <[email protected]>
I'm not sure I'm understanding your problem with the Files window. To try
this, I opened eight files in the Files window in Edit View. From there I
could drag any one of them into the Edit window with no problems. I also
was able to drag them into different tracks in Multi Track View. I also put
files into the Files window, CTRL+clicked all of them and dragged all of
them at once into the Multi Track View successfully. I repeated this doing
SHIFT+click. I then put into the Files window tracks that have different
sample rates. They all went into the Multi Track without incident (after
the program resampled the unmatching tracks to conform to the session's
sample rate).
>
Yes, you are correct that the files not used in the session are not
reloaded into the Files window when the session is reopened.
>

Problems when importing multiple files into key frames

I'm creating an interactive flash application that uses hundreds of individual renders from a 3d modelling app. The image file size is 800 x 600. Each sequence that i import to the stage is around 120 images and each gets put into a separate key frame. The problem is, often when I import batches of files into flash the program crashes and stops responding. The problem gets worse after each succesful import ie. after importing the first lot of files, its unlikely that the second lot of files will import.
Interestingly, I dont have this problem on my pc. So I can do all the importing on my pc, but when I try and compile the swf file my pc does not create a file and sometimes crashes. So I am having to import on my pc and compile the swf on my mac.
Anyone else having similar problems? is there a better way of going about this?

flash is limited to 16,000 frames.
use several swfs and load them into a main swf.

Importing multiple files using the Import File menu.

For some reason I am never able to add more the 5 mp3 files using the Import File menu. All of my files are located on the NAS device and if I select the Import Folder menu all the files in the folder will be imported. However, time after time I add more files to the same folder and then need to import just the new files to iTunes. For that I am using the Import File menu. If select more then 5 files, only 5 files will be imported. Some times I have 100 new files that I want to add, and moving 5 files a time is time consuming and painful. I try opening the folder, selecting all files and dropping them into iTunes, but that did not work. Is there a way to import more than 5 files at a time, or iTunes is not capable doing that?

I am often surprised how many ways there are to add songs to iTunes. Selecting a number in the open file dialog must have a maximum string length for the file names. I bet that the path and file name are long on those songs and that is why you can only load 5 at a time from your NAS. What I have had luck with and is very easy is to select a group of songs and right click and "play" them. My iTunes is set to import and organize on play. The first song starts playing and they all load. I routinely do this with entire albums without problem.
Paul

Importing multiple files in a sequence

Hi -
I am new to this forum - excuse me if this has already discussed eslewhere. I am trying to see if there is a way of importing clips from an excel file which has the folder name, file name and the time stamp from which the video shd play and import all of them by reading the rows in excel file into premier pro. Any pointers will be helpful. Thanks for the help.
vimmy

Hi Vimmy,
If you can find or create a tool to convert such an Excel file into a Final Cut XML file, Premiere Pro could then import that as a set of clips or as a sequence.
Regards,
Zac

How to import multiple files linked to swf into captivate?

Hi all
I am trying to import a flash swf animation into captivate 5.5. I figured it should be straight forward by going Insert > Animation, but the animation doesn't do what it is meant to. I think this is because the swf file is associated with a number of images, audios and an xml file. I thought if I got all the files into the Captivate library it might work, but I've only been able to import the images and audio not the xml file (Import > XML tells me Captivate can't import xml). I'm not sure what to do to get the animation playing.
Any responses appreciated.
Thanks Peter

Hi Peter,
Importing an animation that has certain required files like graphics and aurido and XMl scattered would not work if each broght sepeartely to library, what is assumed while you do Insert--Animation is that the animation has all the required components embedded in itself.
seo, you can check of the source file can be modified to produce a single flash file that has all required assets embedded in itself.
Thanks,
Anjaneai

SSIS 2012 - Importing multiple files with different columns (where columns are stored in a table)

Hi everyone,
I have been tasked to upgrade an existing DTS package into an SSIS package.
The old package uses 3 tables.
Table 1) Has a list of file names
Table 2) Has a list of columns per file
Table 3) Is the data destination.
So what is supposed to happen is:
Step 1) the package should load the files into a resultset
Step 2) for each file in the resultset, the package should get the related columns
Step 3) the package should now map the columns to the destination table (variable column numbers here)
Step 4) the import should take place.
I have gotten to step 2 but am not sure how to dynamically map the columns to the destination table.
Any pointers anyone?
Thanks in advance!

Hi Tonyhektic,
What’s the nature of Table 2, does it only store the column names for each file? I don’t know how it is implemented in DTS package, however, in SSIS package, dynamic columns mapping is not supported. To work around this issue, we need to use Script component
to do the columns mapping. You can refer to Sorna’s script above or have a look at the following blogs:
http://munishbansal.wordpress.com/2009/06/09/dynamic-columns-mapping-%E2%80%93-script-component-as-destination-ssis/
http://blog.quasarinc.com/ssis/best-solution-to-load-dynamically-change-csv-file-in-ssis-etl-package/
Regards,
Mike Yin
TechNet Community Support

Import multiple files using sql server management studio

Using sql server management studio I want to do 2 things.
- Import all txt files from a directory as tables into my DB.
- Add an additional field to each new table which contains the table name.
Can anyone help me?

There are couple of ways to do it:
File naming conventions : YourFileName_SystemId.txt
You can create one extra column in table or may be name a table with system id. Then after loading the data you can update that column with the system id.
components required:
ForEachLoopContainer - To get file and store file name in a variable
Expression Task (if SSIS 2012 or above) or variable expression or script task to seperate file name from systemId
Data Flow Task - to load data
Execute SQL Task - to update last column or specific table based on precedence constraints
Note: You can also add extra column in data flow via
derived column transformation.
Ex.:
Load file via foreach loop
Split string via seprator
2: Loading different system file in different folder
you can have predefined folder structure ex: SystemId1, SyetemId2 etc and can download respective txt file in their system folder. Then you can easily identity which file belong to which system and then load it to the respective table.
3: Use first row of text file to hold the system value
Use first row to have the system id and then skip row while fetching data.
Note: Then you have to read first row through script task to get the system id.
hope this will help

9iFS: import multiple files with common attributes

Hello,
Customer wants to apply attributes to a set of contributed documents, all at once.
They also want to recursively apply partial attributes to sets of folders / documents.
Did I miss this fundamental feature? Does it require customization?

The problem is that I cannot change the pages size before I transform them to PDF files. The crop tool will not do, because I have to change the pages proportionally. With this tool I can crop only the page, the image will maintain its original size...
Thanks anyway :-)

Import multiple files

Similar Messages

Maybe you are looking for