Import Network host objects to Cisco Security Manager

Is it possible to import complete lists of Network Hosts objects to Cisco Security Manager?
Exporting the hosts already defined in the ASAs is easy but how to import them in CSM??
Thanks

No hostnames discovered go the Policy Object Manager (nor to the Access rules), only group-names (there's a bug in ASAs related to single host names too). The way CSM handles single hosts is previously creating them, so when we later discover devices, the single hosts names set in the discovered device are not considered, only their IP addresses; then you can see that in the discovered access rules CSM shows the hostname as the previously defined ones in the Policy Object Manager. If you dont define those hostnames before the device discovery, you will only see IP addresses, no hostnames, no matter they are set in your firewalls.
Imagine discovering a couple FWSM modules with 500 access rules, and you only get to see the IP addresses of the 2,500 hosts on your network. And you have all those hosts already defined in your FWSM firewalls, when you log via ASDM you view your hard created rules with hostnames, and when you log to CSM you only view IP addresses. The clients get very disappointed with CSM after that, and discard it. The bigger the network, the faster they reject CSM.
The only way to add hosts in the Policy Object Manager is 1 by 1. But as this may have happened to more than one company and considering how easy it is to code a feature like that, I assume that it's possible to import a complete list of single hosts to CSM.
is that really possible? it should be.
thanks for the replies so far

Similar Messages

  • Cisco CSM 4.1: delete unused networks/hosts objects

    I will delete all unused networks/hosts objects in Cisco CSM 4.2 befor I compare the objects with the entries in our IPAM. Does somebody know how this is possible?
    Many thanks for your support.

    Yep
    I had this issue with the service objects. When I created the fliter for the service objects also the CSM predefined objects are displayed. I selected all these objects and choose to delete them. During the delete process CSM stopped to delete the objects by the first CSM predefined object.
    I think you have the same issue (for example with the predefined "any" object, if not referenced in your polocies).
    Workaround:
    - apply filter again and delete the displayed objects (deselect the predefined objects before).

  • Catalyst 3750x and 4510R and Cisco Security Manager

    Hi,
    I just downloaded and install trial (evaluation) version of Cisco Security Manager 4.3. In supported devices list I saw Cisco Catalyst 3750 and 4510R but when I try to add it I got for 3750:
    Invalid device: Device is a switch and cannot be mapped to a Generic Router model.
    Please verify the selected device type, OS version and device configuration
    For 4510R:
    Invalid device: Version 03.03.00.SG (N/A) is not supported for the device type of Cisco Catalyst 4510R Switch Please verify the selected device type, OS version and device configuration
    We need to make a purchase decision but for it we need to import all of our devices and perform some tests.
    Thanks in advance for your replies!
    BR, Vasily.

    I figured this out on my own -- change Compatibility mode of the installer to be Windows 8 (which is same OS version as Windows 2012) and it installs just fine.

  • Cisco Security Manager Advice

    Hi,
    I'm looking into Cisco Security Manager. From what I understand you can monitor and manage Cisco security appliances. I'm interested in the monitoring of our Cisco ASAs - specifically, monitoring VPN sessions and their  trending over months at a time and I would like to monitor other Cisco devices on the network for link problems/performance and such - I don't want to use Cisco Security Manager as a management point. Would Cisco Security Manager not be the right tool for this?
    We have SolarWinds and I've heard that you can assign UnDPs(Device Pollers) to devices you want to monitor, including ASAs and these pollers can give you trending for VPN sessions with graphing. I just want to make the most of our budget dollars.
    Any advice?
    Thanks, Pat.

    CSM 4.3 and above can be used to monitor VPN sessions on Cisco ASAs. You can definitely use CSM as a monitoring only solution for ASAs (without using it for management). You can also explicitly disable policy change privileges for all admins so they do not modify stuff by mistake. Note however that CSM is primarily focused on end-to-end management scenarios (including policy change, troubleshooting, reporting, etc). So you may not find all the bells and whistles in CSM for monitoring scenarios that you may find with some of the pure monitoring only solutions.

  • Deleting multiple devices in Cisco Security Manager

    I imported 200 devices from configuration files in cisco security manager which I need to remove again due to updates in the predeployed configurations...
    Does anyone know how to remove devices without selecting every single one and clicking "delete" or restoring the database? :)
    Thanks!

    Maybe from the common services webpage you could select multiple devices at a time ?

  • Audit Reports on Cisco Security Manager

    Is there a way to schedule audit reports from Cisco Security Manager and distribute those reports via email or some other method?
    My auditors want a daily report of firewall configuration changes. They do not want to login into CS-Mgr every day to manually generate the report.

    Security Audit operates in one of two modes-the Security Audit wizard, which lets you choose which potential security-related configuration changes to implement on your router, and One-Step Lockdown, which automatically makes all recommended security-related configuration changes.
    On routers that do not support the command scheduler interval, Security Audit configures the scheduler allocate command whenever possible. When a router is fast-switching a large number of packets, it is possible for the router to spend so much time responding to interrupts from the network interfaces that no other work gets done. Some very fast packet floods can cause this condition. It may stop administrative access to the router, which is very dangerous when the device is under attack. The scheduler allocate command guarantees a percentage of the router CPU processes for activities other than network switching, such as management processes.
    The configuration that will be delivered to the router to set the scheduler allocate percentage is as follows:
    scheduler allocate 4000 1000

  • Help for Cisco Security Manager

    Hi All,
    Please help me how cisco security manger is managing logs from different devices.
    For example cisco security manager can manage FWSM, ASA, IPS devices.
    Does it stores  logs from this devices into some central location where CSM is being installed in some database or some file.
    Can I be able to read logs for all those devices including CSM from one single point. Please help me.

    Hi Bidyut,
    When CSM services are running, Event Viewer can show the events in real time.
    You are right about backup. When CSM application backup is running, its services on the server are stopped. So, there is a risk of loosing logging events that are sent to CSM server during the period of backup. By scheduling backup out of user-activity hours, risk of losing important events can be minimized.
    On the other hand, events on IPS devices have to be polled from the device. So, there is no loss of IPS events in case of CSM application backup.
    Thanks & Regards,
    Chetan

  • Cisco Security Manager IOPS for Storage (VM Deployent)

    Hi,
    I've been asked by a client about the Cisco Security Manager requirement to have 1TB of storage for events and another for archiving.
    They wish to know the IOPS requirement for this storage. Please could anyone assist in this ?
    Many thanks,
    Mark                 

    Hi,
    I'm not sure that I can really help you, but I can verify that on my CSM 4.5 server which is running normally, that service has a starup type of automatic and is in the "Started" state.
    You may want to check your system and application event logs to see if there are any messages that could explain why it stopped.
    Regards,
    Matt

  • Unable to Install Cisco Security Manager

    Hi,
    I facing issue when trying to install Cisco Security Manager in my Windows Server 2008.
    I had attach the print screen of my server version and error message.
    The error message had mention that it was due to unsupport OS or terminal service.
    But, i check and it show that my Window Server was the recommend version and no terminal service been enable.

    Hi Vincent,
    Please understand that Window Server 2008 R2 Enterprise Server is not same as Windows Server 2008 Enterprise Server. I had faced the same problem earlier. The R2 version is supported only CSM 4.1 onwards.
    Regards,
    Chetan

  • Cisco security Manager Backup error

    i  am getting  the below  error  after the backup in Cisco Security  Manager 3.2
    [Sun Dec 20 00:00:05 2009]  ERROR(313): D:/backup.LOCK file exists
    Most probably another backup process is running
    [Sun Dec 20 00:00:05 2009]  Backup failed: 2009/12/20 00:00:05
    i have deleted the backup.LOCK file and tried  it is giving the same error.
    any one help me in this.
    thanks in advance.

    Update:
    WHen performing the same action through the client interface, rather than from the server interface the backup has appeared to work.
    Is this a feature?
    Needless to say I was able to run a backup.
    Steve

  • Cisco Security Manager Local RBAC Authentication Radius assign user role

    Is it possible to use Cisco Security Manager with local RBAC, authenticate the user to Radius and retrieve it's role from Radius. Getting the authentication to work isn't the problem, but is it also possible to return the role the user has (i.e. Super Admin) via Radius, without having to create all the users one-by-one in the local CSM database with the correct role.
    Can i use a certain Cisco-AV-Pair attribute to return the user role via Radius?

    I just got asked to look at the same situation by one of our security people.
    We have exactly the same problem but it reports a username of "*****" and we are running CSM 4.7 (upgraded last week)

  • Cisco Security Manager logging

    Hello Experts,
    Can anyone help me, how can i configure CSM 4.0 to capture its logs.
    I want to read logs of Cisco Security Manager itself, so how can i do that & in which location it captures it log file.

    There are multiple server logs (47 of them on my CSM 4.4 setup) all stored on the server itself and accessible from Windows Explorer.
    You will need to RDP to the server and look at the log directory under the path where you installed CSM.

  • Cisco Security Manager (CSM) License Problem

    Hi All,
    We have CSM V3.2 with Professional license edition and support 50 devices. It's installed properly in the Cisco Security Manager client as appeared in the attachement but the problem is in the server administration- license management which doesn't include any records for license (see attachment).
    I tried to upload the .lic file by clicking the Update button in server administration but an error message appeared stated that the license file is corrupted although it's installed properly in CSM client!!!
    Could you please advise what's the problem and what should I do?
    Thanks in Advance!

    Sorry but Cisco seems to have removed that product bulletin from cisco.com.
    Your reseller can use Cisco Commerce Workspace (CCW) to order the correct part number for your CSM installation. There is a unique number for each licensing level and/or upgrade.
    For instance, for a 10-device standard license, the support would be part number CON-SAS-CSMST10K.
    For the 100-device Pro license, the support would be CON-SAS-CSMPR4K9.
    The reseller needs to adjust the support term (12-60 months) to suit when ordering.

  • Cisco Security Manager, need global search, i.e. filters are not good at all

    Does anybody know how to work effectively with security manager and filtering?
    It is extremely time consuming and frustrating to work with Cisco Security Manager in regards to search for entries or filter. I have not been able to find some kind of global search, is there?
    How do other people cope with this?

    It appears to have been a temporary issue as the backup is running fine again now... closing the thread.

  • Cisco Security Manager evaluation

    How to download CSM software for evaluation ? CSM Q&A state -
    Anybody with a valid cisco.com account can download Cisco Security Manager and use the software for up to
    90 days in evaluation mode. Visit  http://www.cisco.com/go/csmanager  and select the “Download Software”
    But when I click "Download" I get "To Download this software, you must have a valid service contract associated to your Cisco.com user ID."
    Help, plz.
    BR, Oleg.

    You can contact your local AM to get an evaluations version, this is related to the new 'restricted' downloaded access on CCO. You need to have a service contract assocaited for that 'specific' product to download software (I know it does not make sense in case of an evaluation).
    And you also have the following alternate:
    Note:
    This download does not include  CiscoWorks Resource Manager Essentials (RME). For customers that wish to  also evaluate CiscoWorks RME or that prefer a media format rather than a  large download, an evaluation DVD can be ordered from Cisco  Marketplace. At http://www.cisco.com/pcgi-bin/marketplace/welcome.pl,  navigate to the Collateral and Subscriptions Store and search for part  number EVAL-CSMGR-4.0.
    Regards
    Farrukh

Maybe you are looking for

  • URGENT..How to Run Cash Flow Report.

    How do I run the cashflow report. I opened the cash flow report by going in t.code S_ALR_87012272. I entered the co. code and the g/l accounts, and the fiscal year and executed the report. But it opened a screen with no records found, although the g/

  • Build in ethernet don't work since install OSX 10.7 on macbookpro

    Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15. Someone else has the same problem?

  • Issue in Splitting

    Hi , I am facing following issue while posting KSII : Cost center CTR 1000/1015091, cost element 680100: Splitting is not possible Message no. KD302 Diagnosis Cost element 680100 cannot be split for cost center CTR 1000/1015091, period(s) 1, because:

  • SSH Encryption in Firefox for OSX 10.4.8

    im looking to install some sort of SSH tunnel in firefox. i tried installing Tor and privoxy but now i cant access anything on the internet. it says the proxy isnt allowing connections. Now when im trying to access my banking, it says i cannot view t

  • Why does Verizon expect me to buy a wireless network extender?

    My wife and I have been Verizon customers for 15 years for reasons that aren't entirely clear. We recently moved (less than two miles) and now our phones do not work in our new home. Period. In order to make or receive a call or text, I have to physi