Import not all records

Hi, all!
We use BPC MS 7.5 sp 06.
We try import txt file. But not all records loaded.
We checked tmp file that generated during Import and saw that all files that we try to import exceeds max 1,265 KB, and last record in this file not the same as in source file.
And at all not all records imported in application and there isn't errors during Import.
Does anybode know how to change this limit?
Best regards,
Iaroslav

Hi,
Once again, the number of records might not be similar in BPC and file. The reason behind this is the records might get aggregated while importing. Hence, you should consider this while comparing the data.
Let me give an example to explain this scenario.
Lets say below are the records in your file:
ACCOUNT    ENTITY    CATEGORY    VENDOR    AMOUNT
ACC1       ABC       ACTUAL      1234      1000
ACC1       ABC       ACTUAL      5678      2000
One you import the data, if your application doesnt have VENDOR dimension, then the 2 records will get aggregated and will be displayed as:
ACCOUNT    ENTITY    CATEGORY    AMOUNT
ACC1       ABC       ACTUAL       3000
So, you see, the source file has 2 records. However, the application has only 1 record. So, the record count doesnt match. You wont even get any rejected count, because both the records from the file have been imported successfully. Its just that the records have been aggregated.
Please note that the above example is just to show you how the records will get aggregated.
Hope this helps.

Similar Messages

How to read some records from a text file into java(not all records)

hello,
how to read text files into java. i need only few records from the text file not all records at a time.
If any one knows plz reply me
my id is [email protected]

this snipet reads a text file line by line from line 1 to 3
try {
              FileReader fr = new FileReader(directory);
              BufferedReader br = new BufferedReader(fr);
              int counter = 0;
              while ((dbconn = br.readLine()) != null) {
                  switch(counter){
                      case 0:
                        status = dbconn;
                      break;
                      case 1:
                        userName = dbconn;
                      break;
                      case 2:
                        apword = dbconn;
                      break;
                  counter++;
              br.close();
    }catch(IOException e){
    }

IPhoto to Aperture 3 import - not all photos get imported...

Hello - My library is not huge, only about 8000 photos. Just bought Aperture 3 and imported my iPhoto library into A3. Seemed to go without issues. Today, as I re-organize a few folders, projects, etc., I realize that not all the photos were imported. About 700, to be exact. Every named Event in iPhoto imported over into A3, but not all photos within each Event (now Project). Any thoughts on what could have happened and how this could be avoided?
I could import each Event individually, but then I would loose all my keywords. Any work around you can think of? Thanks!

Try rebuild your iPhoto Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
I would import each event individually, but I would like my keywords preserved
Using the iPhoto Media Browser (File -> Import -> Show iPhoto Browser) will get your keywords too.
Regards
TD
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Urgent: Not all records extracted to ODS

Hi,
Not all of the records I am trying to load get updated to ODS. Ex:
Doc#     Item#     Created On     Debit/Credit
1000     1     02012007     540
1000     2     02012007     540
1000     1     02022007     -540
1000     2     02022007     -540
These 4 records appear as 2 records in ODS as:
1000     1     02022007     -540
1000     2     02022007     -540
When I do simulate update it shows me 4 records till communication structure. But from communication structure to ODS it they come in only as 2 records. There is no routine in update rules it is just direct one to one mapping. I am having this problem for records with same line item # within a document. Please advice how to solve this issue
Thank you,
sam

I personally don't think there would be a requirement to load two line items the way you mention; if that is the case there should generally be some record number also coming in with the data. The data example you gave doesn't look right/complete to me somehow.
Anyway, you can get the record no in many ways. You can create a number range object in the system (check Txn SNUM), and you can then use standard functions in your code to get the next no (I think you can check functions NUMBER_RANGE* in se37 to get an appropriate one). Or you can always read the MAX() no stored in the ODS in this field and start from there in your routine (likely not as robust as the first option).

Not all records shown for selection - CR 2008

I have a crystal report that has dynamic record selection. The selections are set to allow multiple, allow discreet, allow ranges.
When I run the report I am not shown all records on the file to choose from.
The file has approx 6000 records. Does anyone know of any limitations? The file I am writnig report for is from Item Master in SAP. Thanks.

There is a registry entry that limits the number of records shown in a list of values (LOV). The default value is 1000. The registry key is Crystal reports version specific. You should be able to find the key by searching the forum for LOV 1000 or similar...
HTH,
Carl
Moderators: This question comes up once a week, it seems. Maybe we should "pin" the answer to the top of the forum board?

Execute query. Not all records retrieved.

Hi everyone.
I have made a screen with the data block and layout wizzards.
When I click on the default toolbar "Execute query" it brings only 68 records and there are about 25,000!.
I have a botton which displays a LOV of the same table and the LOV is working well, it brings all the records in the table.
Any idea ???
Thanks!

If you go to the bottom of the query, does
it get the next set of records??
Oracle forms buffers the records it gets
based upon the number of records buffered
in the "block properties".
Go to block properties. Look at Number of
records buffered. If you want it to get
ALL records. Set the Query ALL records switch
to "Yes". Try it again.
Hopefully this helps.

Not all records are updated in DSO

Dear Friends
     My Scenario is SAP - FM -> DataSource -> InfoPackage -> DTP ->Transformation - > DSO.
     I have 896 Records in my PSA , but when I run DTP to load the data in DSO only 817 records are added, rest records are not updated. I have supplied
Purchasing organization             0PURCH_ORG
Purchasing Group                      0PUR_GROUP
Vendor                                      0VENDOR
BW: Document Number              0DOC_NUM
BW: Document Item Number      0DOC_ITEM
Material                                    0MATERIAL
Accounting document number    0AC_DOC_NO
Item in Material Document         ZZEILE
as key fields of DSO.
can you suggest me what could be possible reason for not having all the records.
Regards
Naim

Hi,
is it full load?
Have you applied any filters at dtp level?
if its full load then delete whole psa data and dso data.
reload them again and see the count.
As per dso primary keys, same combination data will over write it.
how many records count you see at dso-->manage-->request tab
Added and transferred.
Thanks

Master - some records : Detail - for only a few i(not all)records in master

Hi
I have a requirement like master and detail. However I do not wish to see the details of everything that is there in the master but only a few records (based on some criteria). Example:
Id Desc Col3 Col4
1 1 desc 1col3 1col4
2 2 desc 2col3 2col4
3 3 desc 3col3 3col4
id col5 col6 col7
3 abc def ghi
4 4 desc 4col3 4col4
How can I have such a layout in which detail shows details of only selected records present in the master?
Any help appreciated big time.
Thx!

1. create two queries. master and detail and link on the fields of interest.
2. on the layout, have repeating frames. one for the master and inside the master frame, a repeating frame for the detail.
hope this is what you are looking for..

Disable few record in a table control not all records

Hi
I have an internal table of   6 rows with table control .first field char 1 (ws_flag) which I am using for line selection of row in the table control .
I have to disable some rows in a table control (user can not select or deselect it).
I dont want to disable all rows . I just want to disable some rows depending upon the condition .
Loop at screen doesnt seem to be working .
I already tried the below given code . how does Screen-name = column name this will besatisfied in a table control.
Set screen attributes for table control
loop at zzhb6_0100 with control zhb6ctl
                    cursor zhb6ctl-top_line.
    module modify_screen_0100.
endloop.
Then:
module modify_screen_0100 output.
loop at screen.
    if screen-name = 'ZZHB6_SAL_PHASE2_S-ZZMERIT_AMT'.
      if zzhb6_sal_phase2_s-zzself_funded = 'X' or
         zzhb6_sal_phase2_s-zzmed_rec     = 'X' or
         zzhb6_sal_phase2_s-zztr          = 'X'.
        screen-input = '0'.                       "Display
        modify screen.
      endif.
    endif.
    if screen-name = 'ZZHB6_SAL_PHASE2_S-ZZMERIT_AMT_SP'.
      if zzhb6_sal_phase2_s-zzself_funded = 'X'.
        screen-input = '0'.                       "Display
        modify screen.
      endif.
    endif.
endloop.

When using table control, chances are you have some code like this in the screen flow logic of the screen.
PROCESS BEFORE OUTPUT.
* PBO FLOW LOGIC FOR TABLECONTROL 'I_WOODCAPCON'
* MODULE I_WOODCAPCON_CHANGE_TC_ATTR.
* MODULE I_WOODCAPCON_CHANGE_COL_ATTR.
LOOP AT   I_WOODCAP
       WITH CONTROL I_WOODCAPCON
       CURSOR I_WOODCAPCON-CURRENT_LINE.
    MODULE I_WOODCAPCON_CHANGE_FIELD_ATTR.
ENDLOOP.
MODULE STATUS_0300.
Notice the MODULE I_WOODCAPCON_CHANGE_FIELD_ATTR. in the above code, this is the module which will allow you to change the attributes of the cell per row. Notice that this MODULE is inside the LOOP statement in the PBO flow logic.
So here is the coding for the module.
module i_woodcapcon_change_field_attr output.
modify i_woodcap index i_woodcapcon-current_line.
loop at screen.
    if i_woodcap-level = 'B'
      and screen-name = 'I_WOODCAP-PDATE'.
          screen-input = '0'.
    endif.
     modify screen.
endloop.
endmodule.
Notice here that my condition statest that if the LEVEL value for the row is "B", then I want to make the PDATE of the row "not ready for input".   'I_WOODCAP is the name of the internal table associated with the table control.
Help this helps.
Regards,
Rich Heilman

Not all records displayed

hi guys,
i'm new in reports, my report has repeating frame the query returned correct result but the reports disply only one page with limited number of records although i set all frames to be variable in vertical elasticity
regards

Which version are you using ?
Are you seeing this in builder ? Builder shows only 1 page by default. Did you try clicking "Next page" ?
When you generate to html are you able to see correct output ?
When you create a report using reports wizard what are you seeing ? Are you able to see correct output ?

Data loads is not picking up all records

Hello, wonder if anyone ever encountered the following problem. I've been trying to load a flat file to BPC and for a year now, we've had no issues. This time however, it seems that not all records were loaded, eventhough the status indicated the correct number of rows were successfully loaded. Any ideas what may be causing this? I've checked the conversion files, account dimension and nothing has changed. Any help with this is greatly appreciated. Ideas on how / where to check for potential trouble spots are all welcome.
Thanks in advance.
David

Hello,
If you are using the standard SSIS package import, the rejected record should be reported into the log file at the end. However, in order to see if there are rejected records or not, you can try to validate your transformation file using the same import file.
You can also verify also the temporary files generated into D:\BPC\Data\Webfolders\APSHELL_Sorin\Finance\PrivatePublications. In this way you can find the right calues imported into the cube.
How you check if data is loaded or not?
Best regards,
Mihaela

End routine not updating all records

Hi,
I have an end routine to update a cube from another cube.
The routine has two loops, one child loop inside the main loop. Result Package was sorted before the loops.
Now, not all records were updated in the target infocube as per expectation. Also, when I pick one such record (that did not get updated) and debug, interestingly it shows that expected value has been assigned to the relevant field. And if I upload only that specific record to the cube, the record does get updated with expected value.
The problem seem to appear only when the whole set of data is loaded.
Any suggestion about the coding or further debugging will be greatly appreciated.
Thanks,
Pranab

HI,
check if u r using any internal tables, make this itab refresh at correct point.i tmight be sumtimes create problem.
else paste ur code here...
thnks.

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Not all files will import from NAS Synology Server to PC running LR 5.3

We recently moved our photos to a new Synolgy NAS server. I have a Lenovo all in one and installed the latest version of LightRoom 5.3. When I import my photos, not all of them get imported, only a fraction of them. I can see all the photos on the server via the run command but after I import not all the photos get transferred over. Does anyone else have this issue? What would cause this bottle neck?

Well, well what do you know.. it just came up..
I moved all files from the LR folder except the catalog, rebooted and it came up...
I guess the next thing to do is to get the previews back.
Hope this is a good sign...

During Import if one record got failed so all records will not import?

Hi All,
I want to clear on the following situation:
I have 10 records in a file and due to 2 records some structural reason import got failed.. So do MDIS will import 8 records and create a file with two records in error folder? or it will not import at all and create a file in the error folder?
How does it works? basically I want to know if because of any reason 1-2 records in a 1000 records file got failed do entire file willnot import or only those errored records are not imported?
THanks
Rajeev

Hi Rajeev,
have 10 records in a file and due to 2 records some structural reason import got failed.. So do MDIS will import 8 records and create a file with two records in error folder? or it will not import at all and create a file in the error folder?
This totally depends on your business scenario,
1. If you want that if there are expection in even one file also all the records should not be imported than also it is possible
2. If you want that if the exception is there than only the exception records should be sent to the Exception Folder and rest of the records should be imported by MDIS service, this process is also possible.
For implementing the second scenario you just have to set the property in Console -> Admin -> Ports
Block on Structural Exception = No
And if you want that the files should not be imported even if one file has exception then set
Block on Structural Exception = Yes
Hope this would be helpful.
Best Regards,
Parul Malhotra

Import not all records

Similar Messages

Maybe you are looking for